setup.c 8.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404
  1. /*
  2. * arch/sh/boards/renesas/r7780rp/setup.c
  3. *
  4. * Renesas Solutions Highlander Support.
  5. *
  6. * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
  7. * Copyright (C) 2005 - 2008 Paul Mundt
  8. *
  9. * This contains support for the R7780RP-1, R7780MP, and R7785RP
  10. * Highlander modules.
  11. *
  12. * This file is subject to the terms and conditions of the GNU General Public
  13. * License. See the file "COPYING" in the main directory of this archive
  14. * for more details.
  15. */
  16. #include <linux/init.h>
  17. #include <linux/platform_device.h>
  18. #include <linux/ata_platform.h>
  19. #include <linux/types.h>
  20. #include <linux/mtd/physmap.h>
  21. #include <linux/i2c.h>
  22. #include <linux/irq.h>
  23. #include <linux/interrupt.h>
  24. #include <linux/usb/r8a66597.h>
  25. #include <net/ax88796.h>
  26. #include <asm/machvec.h>
  27. #include <mach/highlander.h>
  28. #include <asm/clock.h>
  29. #include <asm/heartbeat.h>
  30. #include <asm/io.h>
  31. #include <asm/io_trapped.h>
  32. static struct r8a66597_platdata r8a66597_data = {
  33. .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
  34. .vif = 1,
  35. };
  36. static struct resource r8a66597_usb_host_resources[] = {
  37. [0] = {
  38. .start = 0xA4200000,
  39. .end = 0xA42000FF,
  40. .flags = IORESOURCE_MEM,
  41. },
  42. [1] = {
  43. .start = IRQ_EXT1, /* irq number */
  44. .end = IRQ_EXT1,
  45. .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
  46. },
  47. };
  48. static struct platform_device r8a66597_usb_host_device = {
  49. .name = "r8a66597_hcd",
  50. .id = -1,
  51. .dev = {
  52. .dma_mask = NULL, /* don't use dma */
  53. .coherent_dma_mask = 0xffffffff,
  54. .platform_data = &r8a66597_data,
  55. },
  56. .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
  57. .resource = r8a66597_usb_host_resources,
  58. };
  59. static struct resource m66592_usb_peripheral_resources[] = {
  60. [0] = {
  61. .name = "m66592_udc",
  62. .start = 0xb0000000,
  63. .end = 0xb00000FF,
  64. .flags = IORESOURCE_MEM,
  65. },
  66. [1] = {
  67. .name = "m66592_udc",
  68. .start = IRQ_EXT4, /* irq number */
  69. .end = IRQ_EXT4,
  70. .flags = IORESOURCE_IRQ,
  71. },
  72. };
  73. static struct platform_device m66592_usb_peripheral_device = {
  74. .name = "m66592_udc",
  75. .id = -1,
  76. .dev = {
  77. .dma_mask = NULL, /* don't use dma */
  78. .coherent_dma_mask = 0xffffffff,
  79. },
  80. .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources),
  81. .resource = m66592_usb_peripheral_resources,
  82. };
  83. static struct resource cf_ide_resources[] = {
  84. [0] = {
  85. .start = PA_AREA5_IO + 0x1000,
  86. .end = PA_AREA5_IO + 0x1000 + 0x08 - 1,
  87. .flags = IORESOURCE_MEM,
  88. },
  89. [1] = {
  90. .start = PA_AREA5_IO + 0x80c,
  91. .end = PA_AREA5_IO + 0x80c + 0x16 - 1,
  92. .flags = IORESOURCE_MEM,
  93. },
  94. [2] = {
  95. .start = IRQ_CF,
  96. .flags = IORESOURCE_IRQ,
  97. },
  98. };
  99. static struct pata_platform_info pata_info = {
  100. .ioport_shift = 1,
  101. };
  102. static struct platform_device cf_ide_device = {
  103. .name = "pata_platform",
  104. .id = -1,
  105. .num_resources = ARRAY_SIZE(cf_ide_resources),
  106. .resource = cf_ide_resources,
  107. .dev = {
  108. .platform_data = &pata_info,
  109. },
  110. };
  111. static struct resource heartbeat_resources[] = {
  112. [0] = {
  113. .start = PA_OBLED,
  114. .end = PA_OBLED,
  115. .flags = IORESOURCE_MEM,
  116. },
  117. };
  118. #ifndef CONFIG_SH_R7785RP
  119. static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 };
  120. static struct heartbeat_data heartbeat_data = {
  121. .bit_pos = heartbeat_bit_pos,
  122. .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
  123. };
  124. #endif
  125. static struct platform_device heartbeat_device = {
  126. .name = "heartbeat",
  127. .id = -1,
  128. /* R7785RP has a slightly more sensible FPGA.. */
  129. #ifndef CONFIG_SH_R7785RP
  130. .dev = {
  131. .platform_data = &heartbeat_data,
  132. },
  133. #endif
  134. .num_resources = ARRAY_SIZE(heartbeat_resources),
  135. .resource = heartbeat_resources,
  136. };
  137. static struct ax_plat_data ax88796_platdata = {
  138. .flags = AXFLG_HAS_93CX6,
  139. .wordlength = 2,
  140. .dcr_val = 0x1,
  141. .rcr_val = 0x40,
  142. };
  143. static struct resource ax88796_resources[] = {
  144. {
  145. #ifdef CONFIG_SH_R7780RP
  146. .start = 0xa5800400,
  147. .end = 0xa5800400 + (0x20 * 0x2) - 1,
  148. #else
  149. .start = 0xa4100400,
  150. .end = 0xa4100400 + (0x20 * 0x2) - 1,
  151. #endif
  152. .flags = IORESOURCE_MEM,
  153. },
  154. {
  155. .start = IRQ_AX88796,
  156. .end = IRQ_AX88796,
  157. .flags = IORESOURCE_IRQ,
  158. },
  159. };
  160. static struct platform_device ax88796_device = {
  161. .name = "ax88796",
  162. .id = 0,
  163. .dev = {
  164. .platform_data = &ax88796_platdata,
  165. },
  166. .num_resources = ARRAY_SIZE(ax88796_resources),
  167. .resource = ax88796_resources,
  168. };
  169. static struct mtd_partition nor_flash_partitions[] = {
  170. {
  171. .name = "loader",
  172. .offset = 0x00000000,
  173. .size = 512 * 1024,
  174. },
  175. {
  176. .name = "bootenv",
  177. .offset = MTDPART_OFS_APPEND,
  178. .size = 512 * 1024,
  179. },
  180. {
  181. .name = "kernel",
  182. .offset = MTDPART_OFS_APPEND,
  183. .size = 4 * 1024 * 1024,
  184. },
  185. {
  186. .name = "data",
  187. .offset = MTDPART_OFS_APPEND,
  188. .size = MTDPART_SIZ_FULL,
  189. },
  190. };
  191. static struct physmap_flash_data nor_flash_data = {
  192. .width = 4,
  193. .parts = nor_flash_partitions,
  194. .nr_parts = ARRAY_SIZE(nor_flash_partitions),
  195. };
  196. /* This config is flash board for mass production. */
  197. static struct resource nor_flash_resources[] = {
  198. [0] = {
  199. .start = PA_NORFLASH_ADDR,
  200. .end = PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1,
  201. .flags = IORESOURCE_MEM,
  202. }
  203. };
  204. static struct platform_device nor_flash_device = {
  205. .name = "physmap-flash",
  206. .dev = {
  207. .platform_data = &nor_flash_data,
  208. },
  209. .num_resources = ARRAY_SIZE(nor_flash_resources),
  210. .resource = nor_flash_resources,
  211. };
  212. static struct resource smbus_resources[] = {
  213. [0] = {
  214. .start = PA_SMCR,
  215. .end = PA_SMCR + 0x100 - 1,
  216. .flags = IORESOURCE_MEM,
  217. },
  218. [1] = {
  219. .start = IRQ_SMBUS,
  220. .end = IRQ_SMBUS,
  221. .flags = IORESOURCE_IRQ,
  222. },
  223. };
  224. static struct platform_device smbus_device = {
  225. .name = "i2c-highlander",
  226. .id = 0,
  227. .num_resources = ARRAY_SIZE(smbus_resources),
  228. .resource = smbus_resources,
  229. };
  230. static struct i2c_board_info __initdata highlander_i2c_devices[] = {
  231. {
  232. I2C_BOARD_INFO("r2025sd", 0x32),
  233. },
  234. };
  235. static struct platform_device *r7780rp_devices[] __initdata = {
  236. &r8a66597_usb_host_device,
  237. &m66592_usb_peripheral_device,
  238. &heartbeat_device,
  239. &smbus_device,
  240. &nor_flash_device,
  241. #ifndef CONFIG_SH_R7780RP
  242. &ax88796_device,
  243. #endif
  244. };
  245. /*
  246. * The CF is connected using a 16-bit bus where 8-bit operations are
  247. * unsupported. The linux ata driver is however using 8-bit operations, so
  248. * insert a trapped io filter to convert 8-bit operations into 16-bit.
  249. */
  250. static struct trapped_io cf_trapped_io = {
  251. .resource = cf_ide_resources,
  252. .num_resources = 2,
  253. .minimum_bus_width = 16,
  254. };
  255. static int __init r7780rp_devices_setup(void)
  256. {
  257. int ret = 0;
  258. #ifndef CONFIG_SH_R7780RP
  259. if (register_trapped_io(&cf_trapped_io) == 0)
  260. ret |= platform_device_register(&cf_ide_device);
  261. #endif
  262. ret |= platform_add_devices(r7780rp_devices,
  263. ARRAY_SIZE(r7780rp_devices));
  264. ret |= i2c_register_board_info(0, highlander_i2c_devices,
  265. ARRAY_SIZE(highlander_i2c_devices));
  266. return ret;
  267. }
  268. device_initcall(r7780rp_devices_setup);
  269. /*
  270. * Platform specific clocks
  271. */
  272. static int ivdr_clk_enable(struct clk *clk)
  273. {
  274. ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
  275. return 0;
  276. }
  277. static void ivdr_clk_disable(struct clk *clk)
  278. {
  279. ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
  280. }
  281. static struct clk_ops ivdr_clk_ops = {
  282. .enable = ivdr_clk_enable,
  283. .disable = ivdr_clk_disable,
  284. };
  285. static struct clk ivdr_clk = {
  286. .name = "ivdr_clk",
  287. .ops = &ivdr_clk_ops,
  288. };
  289. static struct clk *r7780rp_clocks[] = {
  290. &ivdr_clk,
  291. };
  292. static void r7780rp_power_off(void)
  293. {
  294. if (mach_is_r7780mp() || mach_is_r7785rp())
  295. ctrl_outw(0x0001, PA_POFF);
  296. }
  297. /*
  298. * Initialize the board
  299. */
  300. static void __init highlander_setup(char **cmdline_p)
  301. {
  302. u16 ver = ctrl_inw(PA_VERREG);
  303. int i;
  304. printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
  305. mach_is_r7780rp() ? "R7780RP-1" :
  306. mach_is_r7780mp() ? "R7780MP" :
  307. "R7785RP");
  308. printk(KERN_INFO "Board version: %d (revision %d), "
  309. "FPGA version: %d (revision %d)\n",
  310. (ver >> 12) & 0xf, (ver >> 8) & 0xf,
  311. (ver >> 4) & 0xf, ver & 0xf);
  312. highlander_plat_pinmux_setup();
  313. /*
  314. * Enable the important clocks right away..
  315. */
  316. for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) {
  317. struct clk *clk = r7780rp_clocks[i];
  318. clk_register(clk);
  319. clk_enable(clk);
  320. }
  321. ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */
  322. if (mach_is_r7780rp())
  323. ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */
  324. ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
  325. pm_power_off = r7780rp_power_off;
  326. }
  327. static unsigned char irl2irq[HL_NR_IRL];
  328. static int highlander_irq_demux(int irq)
  329. {
  330. if (irq >= HL_NR_IRL || !irl2irq[irq])
  331. return irq;
  332. return irl2irq[irq];
  333. }
  334. static void __init highlander_init_irq(void)
  335. {
  336. unsigned char *ucp = highlander_plat_irq_setup();
  337. if (ucp) {
  338. plat_irq_setup_pins(IRQ_MODE_IRL3210);
  339. memcpy(irl2irq, ucp, HL_NR_IRL);
  340. }
  341. }
  342. /*
  343. * The Machine Vector
  344. */
  345. static struct sh_machine_vector mv_highlander __initmv = {
  346. .mv_name = "Highlander",
  347. .mv_setup = highlander_setup,
  348. .mv_init_irq = highlander_init_irq,
  349. .mv_irq_demux = highlander_irq_demux,
  350. };