idle.c 3.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140
  1. /*
  2. * Idle daemon for PowerPC. Idle daemon will handle any action
  3. * that needs to be taken when the system becomes idle.
  4. *
  5. * Originally written by Cort Dougan (cort@cs.nmt.edu).
  6. * Subsequent 32-bit hacking by Tom Rini, Armin Kuster,
  7. * Paul Mackerras and others.
  8. *
  9. * iSeries supported added by Mike Corrigan <mikejc@us.ibm.com>
  10. *
  11. * Additional shared processor, SMT, and firmware support
  12. * Copyright (c) 2003 Dave Engebretsen <engebret@us.ibm.com>
  13. *
  14. * 32-bit and 64-bit versions merged by Paul Mackerras <paulus@samba.org>
  15. *
  16. * This program is free software; you can redistribute it and/or
  17. * modify it under the terms of the GNU General Public License
  18. * as published by the Free Software Foundation; either version
  19. * 2 of the License, or (at your option) any later version.
  20. */
  21. #include <linux/sched.h>
  22. #include <linux/kernel.h>
  23. #include <linux/smp.h>
  24. #include <linux/cpu.h>
  25. #include <linux/sysctl.h>
  26. #include <linux/tick.h>
  27. #include <asm/system.h>
  28. #include <asm/processor.h>
  29. #include <asm/cputable.h>
  30. #include <asm/time.h>
  31. #include <asm/machdep.h>
  32. #include <asm/smp.h>
  33. #ifdef CONFIG_HOTPLUG_CPU
  34. #define cpu_should_die() cpu_is_offline(smp_processor_id())
  35. #else
  36. #define cpu_should_die() 0
  37. #endif
  38. static int __init powersave_off(char *arg)
  39. {
  40. ppc_md.power_save = NULL;
  41. return 0;
  42. }
  43. __setup("powersave=off", powersave_off);
  44. /*
  45. * The body of the idle task.
  46. */
  47. void cpu_idle(void)
  48. {
  49. if (ppc_md.idle_loop)
  50. ppc_md.idle_loop(); /* doesn't return */
  51. set_thread_flag(TIF_POLLING_NRFLAG);
  52. while (1) {
  53. tick_nohz_stop_sched_tick(1);
  54. while (!need_resched() && !cpu_should_die()) {
  55. ppc64_runlatch_off();
  56. if (ppc_md.power_save) {
  57. clear_thread_flag(TIF_POLLING_NRFLAG);
  58. /*
  59. * smp_mb is so clearing of TIF_POLLING_NRFLAG
  60. * is ordered w.r.t. need_resched() test.
  61. */
  62. smp_mb();
  63. local_irq_disable();
  64. /* Don't trace irqs off for idle */
  65. stop_critical_timings();
  66. /* check again after disabling irqs */
  67. if (!need_resched() && !cpu_should_die())
  68. ppc_md.power_save();
  69. start_critical_timings();
  70. local_irq_enable();
  71. set_thread_flag(TIF_POLLING_NRFLAG);
  72. } else {
  73. /*
  74. * Go into low thread priority and possibly
  75. * low power mode.
  76. */
  77. HMT_low();
  78. HMT_very_low();
  79. }
  80. }
  81. HMT_medium();
  82. ppc64_runlatch_on();
  83. tick_nohz_restart_sched_tick();
  84. if (cpu_should_die())
  85. cpu_die();
  86. preempt_enable_no_resched();
  87. schedule();
  88. preempt_disable();
  89. }
  90. }
  91. int powersave_nap;
  92. #ifdef CONFIG_SYSCTL
  93. /*
  94. * Register the sysctl to set/clear powersave_nap.
  95. */
  96. static ctl_table powersave_nap_ctl_table[]={
  97. {
  98. .ctl_name = KERN_PPC_POWERSAVE_NAP,
  99. .procname = "powersave-nap",
  100. .data = &powersave_nap,
  101. .maxlen = sizeof(int),
  102. .mode = 0644,
  103. .proc_handler = &proc_dointvec,
  104. },
  105. {}
  106. };
  107. static ctl_table powersave_nap_sysctl_root[] = {
  108. {
  109. .ctl_name = CTL_KERN,
  110. .procname = "kernel",
  111. .mode = 0555,
  112. .child = powersave_nap_ctl_table,
  113. },
  114. {}
  115. };
  116. static int __init
  117. register_powersave_nap_sysctl(void)
  118. {
  119. register_sysctl_table(powersave_nap_sysctl_root);
  120. return 0;
  121. }
  122. __initcall(register_powersave_nap_sysctl);
  123. #endif