123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152 |
- /*
- * OMAP Power Management debug routines
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Copyright (C) 2006-2008 Nokia Corporation
- *
- * Written by:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Tony Lindgren
- * Juha Yrjola
- * Amit Kucheria <amit.kucheria@nokia.com>
- * Igor Stoppa <igor.stoppa@nokia.com>
- * Jouni Hogander
- *
- * Based on pm.c for omap2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/kernel.h>
- #include <linux/timer.h>
- #include <linux/clk.h>
- #include <linux/err.h>
- #include <linux/io.h>
- #include <mach/clock.h>
- #include <mach/board.h>
- #include "prm.h"
- #include "cm.h"
- #include "pm.h"
- int omap2_pm_debug;
- #define DUMP_PRM_MOD_REG(mod, reg) \
- regs[reg_count].name = #mod "." #reg; \
- regs[reg_count++].val = prm_read_mod_reg(mod, reg)
- #define DUMP_CM_MOD_REG(mod, reg) \
- regs[reg_count].name = #mod "." #reg; \
- regs[reg_count++].val = cm_read_mod_reg(mod, reg)
- #define DUMP_PRM_REG(reg) \
- regs[reg_count].name = #reg; \
- regs[reg_count++].val = __raw_readl(reg)
- #define DUMP_CM_REG(reg) \
- regs[reg_count].name = #reg; \
- regs[reg_count++].val = __raw_readl(reg)
- #define DUMP_INTC_REG(reg, off) \
- regs[reg_count].name = #reg; \
- regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
- void omap2_pm_dump(int mode, int resume, unsigned int us)
- {
- struct reg {
- const char *name;
- u32 val;
- } regs[32];
- int reg_count = 0, i;
- const char *s1 = NULL, *s2 = NULL;
- if (!resume) {
- #if 0
- /* MPU */
- DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
- DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
- DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
- DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
- DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
- #endif
- #if 0
- /* INTC */
- DUMP_INTC_REG(INTC_MIR0, 0x0084);
- DUMP_INTC_REG(INTC_MIR1, 0x00a4);
- DUMP_INTC_REG(INTC_MIR2, 0x00c4);
- #endif
- #if 0
- DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
- if (cpu_is_omap24xx()) {
- DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
- DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
- OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
- DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
- OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
- }
- DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
- DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
- DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
- DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
- DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
- DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
- DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
- #endif
- #if 0
- /* DSP */
- if (cpu_is_omap24xx()) {
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
- DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
- DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
- DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
- DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
- }
- #endif
- } else {
- DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
- if (cpu_is_omap24xx())
- DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
- DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
- DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
- #if 1
- DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
- DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
- DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
- #endif
- }
- switch (mode) {
- case 0:
- s1 = "full";
- s2 = "retention";
- break;
- case 1:
- s1 = "MPU";
- s2 = "retention";
- break;
- case 2:
- s1 = "MPU";
- s2 = "idle";
- break;
- }
- if (!resume)
- #ifdef CONFIG_NO_HZ
- printk(KERN_INFO
- "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
- jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
- jiffies));
- #else
- printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
- #endif
- else
- printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
- us / 1000, us % 1000);
- for (i = 0; i < reg_count; i++)
- printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
- }
|