collie.c 9.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406
  1. /*
  2. * linux/arch/arm/mach-sa1100/collie.c
  3. *
  4. * May be copied or modified under the terms of the GNU General Public
  5. * License. See linux/COPYING for more information.
  6. *
  7. * This file contains all Collie-specific tweaks.
  8. *
  9. * This program is free software; you can redistribute it and/or modify
  10. * it under the terms of the GNU General Public License version 2 as
  11. * published by the Free Software Foundation.
  12. *
  13. * ChangeLog:
  14. * 2006 Pavel Machek <pavel@ucw.cz>
  15. * 03-06-2004 John Lenz <lenz@cs.wisc.edu>
  16. * 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
  17. * 04-16-2001 Lineo Japan,Inc. ...
  18. */
  19. #include <linux/init.h>
  20. #include <linux/kernel.h>
  21. #include <linux/tty.h>
  22. #include <linux/delay.h>
  23. #include <linux/platform_device.h>
  24. #include <linux/mtd/mtd.h>
  25. #include <linux/mtd/partitions.h>
  26. #include <linux/timer.h>
  27. #include <linux/gpio.h>
  28. #include <linux/pda_power.h>
  29. #include <linux/mfd/ucb1x00.h>
  30. #include <mach/hardware.h>
  31. #include <asm/mach-types.h>
  32. #include <asm/irq.h>
  33. #include <asm/page.h>
  34. #include <asm/setup.h>
  35. #include <mach/collie.h>
  36. #include <asm/mach/arch.h>
  37. #include <asm/mach/flash.h>
  38. #include <asm/mach/map.h>
  39. #include <asm/mach/serial_sa1100.h>
  40. #include <asm/hardware/scoop.h>
  41. #include <asm/mach/sharpsl_param.h>
  42. #include <asm/hardware/locomo.h>
  43. #include <mach/mcp.h>
  44. #include "generic.h"
  45. static struct resource collie_scoop_resources[] = {
  46. [0] = {
  47. .start = 0x40800000,
  48. .end = 0x40800fff,
  49. .flags = IORESOURCE_MEM,
  50. },
  51. };
  52. static struct scoop_config collie_scoop_setup = {
  53. .io_dir = COLLIE_SCOOP_IO_DIR,
  54. .io_out = COLLIE_SCOOP_IO_OUT,
  55. .gpio_base = COLLIE_SCOOP_GPIO_BASE,
  56. };
  57. struct platform_device colliescoop_device = {
  58. .name = "sharp-scoop",
  59. .id = -1,
  60. .dev = {
  61. .platform_data = &collie_scoop_setup,
  62. },
  63. .num_resources = ARRAY_SIZE(collie_scoop_resources),
  64. .resource = collie_scoop_resources,
  65. };
  66. static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
  67. {
  68. .dev = &colliescoop_device.dev,
  69. .irq = COLLIE_IRQ_GPIO_CF_IRQ,
  70. .cd_irq = COLLIE_IRQ_GPIO_CF_CD,
  71. .cd_irq_str = "PCMCIA0 CD",
  72. },
  73. };
  74. static struct scoop_pcmcia_config collie_pcmcia_config = {
  75. .devs = &collie_pcmcia_scoop[0],
  76. .num_devs = 1,
  77. };
  78. static struct ucb1x00_plat_data collie_ucb1x00_data = {
  79. .gpio_base = COLLIE_TC35143_GPIO_BASE,
  80. };
  81. static struct mcp_plat_data collie_mcp_data = {
  82. .mccr0 = MCCR0_ADM | MCCR0_ExtClk,
  83. .sclk_rate = 9216000,
  84. .codec = "ucb1x00",
  85. .codec_pdata = &collie_ucb1x00_data,
  86. };
  87. /*
  88. * Collie AC IN
  89. */
  90. static int collie_power_init(struct device *dev)
  91. {
  92. int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
  93. if (ret)
  94. goto err_gpio_req;
  95. ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
  96. if (ret)
  97. goto err_gpio_in;
  98. return 0;
  99. err_gpio_in:
  100. gpio_free(COLLIE_GPIO_AC_IN);
  101. err_gpio_req:
  102. return ret;
  103. }
  104. static void collie_power_exit(struct device *dev)
  105. {
  106. gpio_free(COLLIE_GPIO_AC_IN);
  107. }
  108. static int collie_power_ac_online(void)
  109. {
  110. return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
  111. }
  112. static char *collie_ac_supplied_to[] = {
  113. "main-battery",
  114. "backup-battery",
  115. };
  116. static struct pda_power_pdata collie_power_data = {
  117. .init = collie_power_init,
  118. .is_ac_online = collie_power_ac_online,
  119. .exit = collie_power_exit,
  120. .supplied_to = collie_ac_supplied_to,
  121. .num_supplicants = ARRAY_SIZE(collie_ac_supplied_to),
  122. };
  123. static struct resource collie_power_resource[] = {
  124. {
  125. .name = "ac",
  126. .flags = IORESOURCE_IRQ |
  127. IORESOURCE_IRQ_HIGHEDGE |
  128. IORESOURCE_IRQ_LOWEDGE,
  129. },
  130. };
  131. static struct platform_device collie_power_device = {
  132. .name = "pda-power",
  133. .id = -1,
  134. .dev.platform_data = &collie_power_data,
  135. .resource = collie_power_resource,
  136. .num_resources = ARRAY_SIZE(collie_power_resource),
  137. };
  138. #ifdef CONFIG_SHARP_LOCOMO
  139. /*
  140. * low-level UART features.
  141. */
  142. struct platform_device collie_locomo_device;
  143. static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
  144. {
  145. if (mctrl & TIOCM_RTS)
  146. locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
  147. else
  148. locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
  149. if (mctrl & TIOCM_DTR)
  150. locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
  151. else
  152. locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
  153. }
  154. static u_int collie_uart_get_mctrl(struct uart_port *port)
  155. {
  156. int ret = TIOCM_CD;
  157. unsigned int r;
  158. r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
  159. if (r == -ENODEV)
  160. return ret;
  161. if (r & LOCOMO_GPIO_CTS)
  162. ret |= TIOCM_CTS;
  163. if (r & LOCOMO_GPIO_DSR)
  164. ret |= TIOCM_DSR;
  165. return ret;
  166. }
  167. static struct sa1100_port_fns collie_port_fns __initdata = {
  168. .set_mctrl = collie_uart_set_mctrl,
  169. .get_mctrl = collie_uart_get_mctrl,
  170. };
  171. static int collie_uart_probe(struct locomo_dev *dev)
  172. {
  173. return 0;
  174. }
  175. static int collie_uart_remove(struct locomo_dev *dev)
  176. {
  177. return 0;
  178. }
  179. static struct locomo_driver collie_uart_driver = {
  180. .drv = {
  181. .name = "collie_uart",
  182. },
  183. .devid = LOCOMO_DEVID_UART,
  184. .probe = collie_uart_probe,
  185. .remove = collie_uart_remove,
  186. };
  187. static int __init collie_uart_init(void)
  188. {
  189. return locomo_driver_register(&collie_uart_driver);
  190. }
  191. device_initcall(collie_uart_init);
  192. #endif
  193. static struct resource locomo_resources[] = {
  194. [0] = {
  195. .start = 0x40000000,
  196. .end = 0x40001fff,
  197. .flags = IORESOURCE_MEM,
  198. },
  199. [1] = {
  200. .start = IRQ_GPIO25,
  201. .end = IRQ_GPIO25,
  202. .flags = IORESOURCE_IRQ,
  203. },
  204. };
  205. static struct locomo_platform_data locomo_info = {
  206. .irq_base = IRQ_BOARD_START,
  207. };
  208. struct platform_device collie_locomo_device = {
  209. .name = "locomo",
  210. .id = 0,
  211. .dev = {
  212. .platform_data = &locomo_info,
  213. },
  214. .num_resources = ARRAY_SIZE(locomo_resources),
  215. .resource = locomo_resources,
  216. };
  217. static struct platform_device *devices[] __initdata = {
  218. &collie_locomo_device,
  219. &colliescoop_device,
  220. &collie_power_device,
  221. };
  222. static struct mtd_partition collie_partitions[] = {
  223. {
  224. .name = "bootloader",
  225. .offset = 0,
  226. .size = 0x000C0000,
  227. .mask_flags = MTD_WRITEABLE
  228. }, {
  229. .name = "kernel",
  230. .offset = MTDPART_OFS_APPEND,
  231. .size = 0x00100000,
  232. }, {
  233. .name = "rootfs",
  234. .offset = MTDPART_OFS_APPEND,
  235. .size = 0x00e20000,
  236. }
  237. };
  238. static int collie_flash_init(void)
  239. {
  240. int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
  241. if (rc)
  242. return rc;
  243. rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1);
  244. if (rc)
  245. gpio_free(COLLIE_GPIO_VPEN);
  246. return rc;
  247. }
  248. static void collie_set_vpp(int vpp)
  249. {
  250. gpio_set_value(COLLIE_GPIO_VPEN, vpp);
  251. }
  252. static void collie_flash_exit(void)
  253. {
  254. gpio_free(COLLIE_GPIO_VPEN);
  255. }
  256. static struct flash_platform_data collie_flash_data = {
  257. .map_name = "cfi_probe",
  258. .init = collie_flash_init,
  259. .set_vpp = collie_set_vpp,
  260. .exit = collie_flash_exit,
  261. .parts = collie_partitions,
  262. .nr_parts = ARRAY_SIZE(collie_partitions),
  263. };
  264. static struct resource collie_flash_resources[] = {
  265. {
  266. .start = SA1100_CS0_PHYS,
  267. .end = SA1100_CS0_PHYS + SZ_32M - 1,
  268. .flags = IORESOURCE_MEM,
  269. }
  270. };
  271. static void __init collie_init(void)
  272. {
  273. int ret = 0;
  274. /* cpu initialize */
  275. GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
  276. GPIO_MCP_CLK | GPIO_32_768kHz;
  277. GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
  278. GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
  279. GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
  280. _COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
  281. _COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
  282. PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
  283. PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
  284. PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
  285. PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY |
  286. _COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
  287. PGSR = _COLLIE_GPIO_nREMOCON_ON;
  288. PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
  289. PCFR = PCFR_OPDE;
  290. GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
  291. collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN);
  292. collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN);
  293. platform_scoop_config = &collie_pcmcia_config;
  294. ret = platform_add_devices(devices, ARRAY_SIZE(devices));
  295. if (ret) {
  296. printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
  297. }
  298. sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
  299. ARRAY_SIZE(collie_flash_resources));
  300. /*
  301. * Setup the PPC unit correctly.
  302. */
  303. PPDR &= ~PPC_RXD4;
  304. PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
  305. PSDR |= PPC_RXD4;
  306. PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
  307. PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
  308. sa11x0_register_mcp(&collie_mcp_data);
  309. sharpsl_save_param();
  310. }
  311. static struct map_desc collie_io_desc[] __initdata = {
  312. { /* 32M main flash (cs0) */
  313. .virtual = 0xe8000000,
  314. .pfn = __phys_to_pfn(0x00000000),
  315. .length = 0x02000000,
  316. .type = MT_DEVICE
  317. }, { /* 32M boot flash (cs1) */
  318. .virtual = 0xea000000,
  319. .pfn = __phys_to_pfn(0x08000000),
  320. .length = 0x02000000,
  321. .type = MT_DEVICE
  322. }
  323. };
  324. static void __init collie_map_io(void)
  325. {
  326. sa1100_map_io();
  327. iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
  328. #ifdef CONFIG_SHARP_LOCOMO
  329. sa1100_register_uart_fns(&collie_port_fns);
  330. #endif
  331. sa1100_register_uart(0, 3);
  332. sa1100_register_uart(1, 1);
  333. }
  334. MACHINE_START(COLLIE, "Sharp-Collie")
  335. .map_io = collie_map_io,
  336. .init_irq = sa1100_init_irq,
  337. .timer = &sa1100_timer,
  338. .init_machine = collie_init,
  339. .restart = sa11x0_restart,
  340. MACHINE_END