snowball.dts 3.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170
  1. /*
  2. * Copyright 2011 ST-Ericsson AB
  3. *
  4. * The code contained herein is licensed under the GNU General Public
  5. * License. You may obtain a copy of the GNU General Public License
  6. * Version 2 or later at the following locations:
  7. *
  8. * http://www.opensource.org/licenses/gpl-license.html
  9. * http://www.gnu.org/copyleft/gpl.html
  10. */
  11. /dts-v1/;
  12. /include/ "db8500.dtsi"
  13. / {
  14. model = "Calao Systems Snowball platform with device tree";
  15. compatible = "calaosystems,snowball-a9500";
  16. memory {
  17. reg = <0x00000000 0x20000000>;
  18. };
  19. en_3v3_reg: en_3v3 {
  20. compatible = "regulator-fixed";
  21. regulator-name = "en-3v3-fixed-supply";
  22. regulator-min-microvolt = <3300000>;
  23. regulator-max-microvolt = <3300000>;
  24. gpios = <&gpio0 26 0x4>; // 26
  25. startup-delay-us = <5000>;
  26. enable-active-high;
  27. };
  28. gpio_keys {
  29. compatible = "gpio-keys";
  30. #address-cells = <1>;
  31. #size-cells = <0>;
  32. button@1 {
  33. debounce_interval = <50>;
  34. wakeup = <1>;
  35. linux,code = <2>;
  36. label = "userpb";
  37. gpios = <&gpio1 0 0x4>;
  38. };
  39. button@2 {
  40. debounce_interval = <50>;
  41. wakeup = <1>;
  42. linux,code = <3>;
  43. label = "extkb1";
  44. gpios = <&gpio4 23 0x4>;
  45. };
  46. button@3 {
  47. debounce_interval = <50>;
  48. wakeup = <1>;
  49. linux,code = <4>;
  50. label = "extkb2";
  51. gpios = <&gpio4 24 0x4>;
  52. };
  53. button@4 {
  54. debounce_interval = <50>;
  55. wakeup = <1>;
  56. linux,code = <5>;
  57. label = "extkb3";
  58. gpios = <&gpio5 1 0x4>;
  59. };
  60. button@5 {
  61. debounce_interval = <50>;
  62. wakeup = <1>;
  63. linux,code = <6>;
  64. label = "extkb4";
  65. gpios = <&gpio5 2 0x4>;
  66. };
  67. };
  68. leds {
  69. compatible = "gpio-leds";
  70. used-led {
  71. label = "user_led";
  72. gpios = <&gpio4 14 0x4>;
  73. };
  74. };
  75. soc-u9500 {
  76. external-bus@50000000 {
  77. status = "okay";
  78. ethernet@0 {
  79. compatible = "smsc,lan9115";
  80. reg = <0 0x10000>;
  81. interrupts = <12 0x1>;
  82. interrupt-parent = <&gpio4>;
  83. vdd33a-supply = <&en_3v3_reg>;
  84. vddvario-supply = <&db8500_vape_reg>;
  85. reg-shift = <1>;
  86. reg-io-width = <2>;
  87. smsc,force-internal-phy;
  88. smsc,irq-active-high;
  89. smsc,irq-push-pull;
  90. };
  91. };
  92. // External Micro SD slot
  93. sdi@80126000 {
  94. arm,primecell-periphid = <0x10480180>;
  95. max-frequency = <50000000>;
  96. bus-width = <8>;
  97. mmc-cap-mmc-highspeed;
  98. vmmc-supply = <&ab8500_ldo_aux3_reg>;
  99. #gpio-cells = <1>;
  100. cd-gpios = <&gpio6 26 0x4>; // 218
  101. cd-inverted;
  102. status = "okay";
  103. };
  104. // On-board eMMC
  105. sdi@80114000 {
  106. arm,primecell-periphid = <0x10480180>;
  107. max-frequency = <50000000>;
  108. bus-width = <8>;
  109. mmc-cap-mmc-highspeed;
  110. vmmc-supply = <&ab8500_ldo_aux2_reg>;
  111. status = "okay";
  112. };
  113. uart@80120000 {
  114. status = "okay";
  115. };
  116. uart@80121000 {
  117. status = "okay";
  118. };
  119. uart@80007000 {
  120. status = "okay";
  121. };
  122. i2c@80004000 {
  123. tc3589x@42 {
  124. //compatible = "tc3589x";
  125. reg = <0x42>;
  126. gpios = <&gpio6 25 0x4>;
  127. interrupt-parent = <&gpio6>;
  128. };
  129. tps61052@33 {
  130. //compatible = "tps61052";
  131. reg = <0x33>;
  132. };
  133. };
  134. i2c@80128000 {
  135. lp5521@0x33 {
  136. // compatible = "lp5521";
  137. reg = <0x33>;
  138. };
  139. lp5521@0x34 {
  140. // compatible = "lp5521";
  141. reg = <0x34>;
  142. };
  143. bh1780@0x29 {
  144. // compatible = "rohm,bh1780gli";
  145. reg = <0x33>;
  146. };
  147. };
  148. };
  149. };