| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172 |
- #
- # Makefile for the linux kernel.
- #
- # Common support (must be linked before board specific support)
- obj-y += clock.o devices.o generic.o irq.o dma.o \
- time.o gpio.o reset.o
- obj-$(CONFIG_PM) += pm.o sleep.o standby.o
- obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
- # Generic drivers that other drivers may depend upon
- obj-$(CONFIG_PXA_SSP) += ssp.o
- obj-$(CONFIG_PXA_PWM) += pwm.o
- # SoC-specific code
- obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
- obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
- obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
- obj-$(CONFIG_CPU_PXA300) += pxa300.o
- obj-$(CONFIG_CPU_PXA320) += pxa320.o
- obj-$(CONFIG_CPU_PXA930) += pxa930.o
- # Specific board support
- obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
- obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
- obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
- obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
- obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
- obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
- obj-$(CONFIG_MACH_COLIBRI) += colibri.o
- obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
- obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
- obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
- obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
- obj-$(CONFIG_MACH_PCM027) += pcm027.o
- obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
- obj-$(CONFIG_MACH_TOSA) += tosa.o
- obj-$(CONFIG_MACH_EM_X270) += em-x270.o
- obj-$(CONFIG_MACH_MAGICIAN) += magician.o
- obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o eseries_udc.o
- obj-$(CONFIG_MACH_E740) += e740_lcd.o
- obj-$(CONFIG_MACH_E750) += e750_lcd.o
- obj-$(CONFIG_MACH_E400) += e400_lcd.o
- obj-$(CONFIG_MACH_E800) += e800_lcd.o
- obj-$(CONFIG_MACH_PALMTX) += palmtx.o
- ifeq ($(CONFIG_MACH_ZYLONITE),y)
- obj-y += zylonite.o
- obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
- obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
- endif
- obj-$(CONFIG_MACH_LITTLETON) += littleton.o
- obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
- obj-$(CONFIG_MACH_SAAR) += saar.o
- obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o
- obj-$(CONFIG_PXA_EZX) += ezx.o
- # Support for blinky lights
- led-y := leds.o
- led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
- led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
- led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
- led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
- obj-$(CONFIG_LEDS) += $(led-y)
- ifeq ($(CONFIG_PCI),y)
- obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
- endif
- obj-$(CONFIG_TOSA_BT) += tosa-bt.o
|
