board-mx53_evk.c 3.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153
  1. /*
  2. * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
  3. * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
  4. */
  5. /*
  6. * This program is free software; you can redistribute it and/or modify
  7. * it under the terms of the GNU General Public License as published by
  8. * the Free Software Foundation; either version 2 of the License, or
  9. * (at your option) any later version.
  10. * This program is distributed in the hope that it will be useful,
  11. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13. * GNU General Public License for more details.
  14. * You should have received a copy of the GNU General Public License along
  15. * with this program; if not, write to the Free Software Foundation, Inc.,
  16. * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  17. */
  18. #include <linux/init.h>
  19. #include <linux/clk.h>
  20. #include <linux/delay.h>
  21. #include <linux/gpio.h>
  22. #include <linux/spi/flash.h>
  23. #include <linux/spi/spi.h>
  24. #include <mach/common.h>
  25. #include <mach/hardware.h>
  26. #include <asm/mach-types.h>
  27. #include <asm/mach/arch.h>
  28. #include <asm/mach/time.h>
  29. #include <mach/iomux-mx53.h>
  30. #define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6)
  31. #define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30)
  32. #define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
  33. #include "crm_regs.h"
  34. #include "devices-imx53.h"
  35. static iomux_v3_cfg_t mx53_evk_pads[] = {
  36. MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
  37. MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
  38. MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
  39. MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
  40. MX53_PAD_PATA_DIOR__UART2_RTS,
  41. MX53_PAD_PATA_INTRQ__UART2_CTS,
  42. MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
  43. MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
  44. MX53_PAD_EIM_D16__ECSPI1_SCLK,
  45. MX53_PAD_EIM_D17__ECSPI1_MISO,
  46. MX53_PAD_EIM_D18__ECSPI1_MOSI,
  47. /* ecspi chip select lines */
  48. MX53_PAD_EIM_EB2__GPIO2_30,
  49. MX53_PAD_EIM_D19__GPIO3_19,
  50. };
  51. static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
  52. .flags = IMXUART_HAVE_RTSCTS,
  53. };
  54. static inline void mx53_evk_init_uart(void)
  55. {
  56. imx53_add_imx_uart(0, NULL);
  57. imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
  58. imx53_add_imx_uart(2, NULL);
  59. }
  60. static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
  61. .bitrate = 100000,
  62. };
  63. static inline void mx53_evk_fec_reset(void)
  64. {
  65. int ret;
  66. /* reset FEC PHY */
  67. ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
  68. "fec-phy-reset");
  69. if (ret) {
  70. printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
  71. return;
  72. }
  73. msleep(1);
  74. gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
  75. }
  76. static struct fec_platform_data mx53_evk_fec_pdata = {
  77. .phy = PHY_INTERFACE_MODE_RMII,
  78. };
  79. static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
  80. {
  81. .modalias = "mtd_dataflash",
  82. .max_speed_hz = 25000000,
  83. .bus_num = 0,
  84. .chip_select = 1,
  85. .mode = SPI_MODE_0,
  86. .platform_data = NULL,
  87. },
  88. };
  89. static int mx53_evk_spi_cs[] = {
  90. EVK_ECSPI1_CS0,
  91. EVK_ECSPI1_CS1,
  92. };
  93. static const struct spi_imx_master mx53_evk_spi_data __initconst = {
  94. .chipselect = mx53_evk_spi_cs,
  95. .num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
  96. };
  97. static void __init mx53_evk_board_init(void)
  98. {
  99. mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
  100. ARRAY_SIZE(mx53_evk_pads));
  101. mx53_evk_init_uart();
  102. mx53_evk_fec_reset();
  103. imx53_add_fec(&mx53_evk_fec_pdata);
  104. imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
  105. imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
  106. imx53_add_sdhci_esdhc_imx(0, NULL);
  107. imx53_add_sdhci_esdhc_imx(1, NULL);
  108. spi_register_board_info(mx53_evk_spi_board_info,
  109. ARRAY_SIZE(mx53_evk_spi_board_info));
  110. imx53_add_ecspi(0, &mx53_evk_spi_data);
  111. imx53_add_imx2_wdt(0, NULL);
  112. }
  113. static void __init mx53_evk_timer_init(void)
  114. {
  115. mx53_clocks_init(32768, 24000000, 22579200, 0);
  116. }
  117. static struct sys_timer mx53_evk_timer = {
  118. .init = mx53_evk_timer_init,
  119. };
  120. MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
  121. .map_io = mx53_map_io,
  122. .init_early = imx53_init_early,
  123. .init_irq = mx53_init_irq,
  124. .timer = &mx53_evk_timer,
  125. .init_machine = mx53_evk_board_init,
  126. MACHINE_END