smpboot.c 33 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336
  1. /*
  2. * x86 SMP booting functions
  3. *
  4. * (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
  5. * (c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
  6. * Copyright 2001 Andi Kleen, SuSE Labs.
  7. *
  8. * Much of the core SMP work is based on previous work by Thomas Radke, to
  9. * whom a great many thanks are extended.
  10. *
  11. * Thanks to Intel for making available several different Pentium,
  12. * Pentium Pro and Pentium-II/Xeon MP machines.
  13. * Original development of Linux SMP code supported by Caldera.
  14. *
  15. * This code is released under the GNU General Public License version 2 or
  16. * later.
  17. *
  18. * Fixes
  19. * Felix Koop : NR_CPUS used properly
  20. * Jose Renau : Handle single CPU case.
  21. * Alan Cox : By repeated request 8) - Total BogoMIPS report.
  22. * Greg Wright : Fix for kernel stacks panic.
  23. * Erich Boleyn : MP v1.4 and additional changes.
  24. * Matthias Sattler : Changes for 2.1 kernel map.
  25. * Michel Lespinasse : Changes for 2.1 kernel map.
  26. * Michael Chastain : Change trampoline.S to gnu as.
  27. * Alan Cox : Dumb bug: 'B' step PPro's are fine
  28. * Ingo Molnar : Added APIC timers, based on code
  29. * from Jose Renau
  30. * Ingo Molnar : various cleanups and rewrites
  31. * Tigran Aivazian : fixed "0.00 in /proc/uptime on SMP" bug.
  32. * Maciej W. Rozycki : Bits for genuine 82489DX APICs
  33. * Andi Kleen : Changed for SMP boot into long mode.
  34. * Martin J. Bligh : Added support for multi-quad systems
  35. * Dave Jones : Report invalid combinations of Athlon CPUs.
  36. * Rusty Russell : Hacked into shape for new "hotplug" boot process.
  37. * Andi Kleen : Converted to new state machine.
  38. * Ashok Raj : CPU hotplug support
  39. * Glauber Costa : i386 and x86_64 integration
  40. */
  41. #include <linux/init.h>
  42. #include <linux/smp.h>
  43. #include <linux/module.h>
  44. #include <linux/sched.h>
  45. #include <linux/percpu.h>
  46. #include <linux/bootmem.h>
  47. #include <linux/err.h>
  48. #include <linux/nmi.h>
  49. #include <asm/acpi.h>
  50. #include <asm/desc.h>
  51. #include <asm/nmi.h>
  52. #include <asm/irq.h>
  53. #include <asm/idle.h>
  54. #include <asm/trampoline.h>
  55. #include <asm/cpu.h>
  56. #include <asm/numa.h>
  57. #include <asm/pgtable.h>
  58. #include <asm/tlbflush.h>
  59. #include <asm/mtrr.h>
  60. #include <asm/vmi.h>
  61. #include <asm/apic.h>
  62. #include <asm/setup.h>
  63. #include <asm/uv/uv.h>
  64. #include <linux/mc146818rtc.h>
  65. #include <asm/smpboot_hooks.h>
  66. #ifdef CONFIG_X86_32
  67. u8 apicid_2_node[MAX_APICID];
  68. static int low_mappings;
  69. #endif
  70. /* State of each CPU */
  71. DEFINE_PER_CPU(int, cpu_state) = { 0 };
  72. /* Store all idle threads, this can be reused instead of creating
  73. * a new thread. Also avoids complicated thread destroy functionality
  74. * for idle threads.
  75. */
  76. #ifdef CONFIG_HOTPLUG_CPU
  77. /*
  78. * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is
  79. * removed after init for !CONFIG_HOTPLUG_CPU.
  80. */
  81. static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
  82. #define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x))
  83. #define set_idle_for_cpu(x, p) (per_cpu(idle_thread_array, x) = (p))
  84. #else
  85. static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
  86. #define get_idle_for_cpu(x) (idle_thread_array[(x)])
  87. #define set_idle_for_cpu(x, p) (idle_thread_array[(x)] = (p))
  88. #endif
  89. /* Number of siblings per CPU package */
  90. int smp_num_siblings = 1;
  91. EXPORT_SYMBOL(smp_num_siblings);
  92. /* Last level cache ID of each logical CPU */
  93. DEFINE_PER_CPU(u16, cpu_llc_id) = BAD_APICID;
  94. /* representing HT siblings of each logical CPU */
  95. DEFINE_PER_CPU(cpumask_var_t, cpu_sibling_map);
  96. EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
  97. /* representing HT and core siblings of each logical CPU */
  98. DEFINE_PER_CPU(cpumask_var_t, cpu_core_map);
  99. EXPORT_PER_CPU_SYMBOL(cpu_core_map);
  100. /* Per CPU bogomips and other parameters */
  101. DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
  102. EXPORT_PER_CPU_SYMBOL(cpu_info);
  103. atomic_t init_deasserted;
  104. #if defined(CONFIG_NUMA) && defined(CONFIG_X86_32)
  105. /* which node each logical CPU is on */
  106. int cpu_to_node_map[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 };
  107. EXPORT_SYMBOL(cpu_to_node_map);
  108. /* set up a mapping between cpu and node. */
  109. static void map_cpu_to_node(int cpu, int node)
  110. {
  111. printk(KERN_INFO "Mapping cpu %d to node %d\n", cpu, node);
  112. cpumask_set_cpu(cpu, node_to_cpumask_map[node]);
  113. cpu_to_node_map[cpu] = node;
  114. }
  115. /* undo a mapping between cpu and node. */
  116. static void unmap_cpu_to_node(int cpu)
  117. {
  118. int node;
  119. printk(KERN_INFO "Unmapping cpu %d from all nodes\n", cpu);
  120. for (node = 0; node < MAX_NUMNODES; node++)
  121. cpumask_clear_cpu(cpu, node_to_cpumask_map[node]);
  122. cpu_to_node_map[cpu] = 0;
  123. }
  124. #else /* !(CONFIG_NUMA && CONFIG_X86_32) */
  125. #define map_cpu_to_node(cpu, node) ({})
  126. #define unmap_cpu_to_node(cpu) ({})
  127. #endif
  128. #ifdef CONFIG_X86_32
  129. static int boot_cpu_logical_apicid;
  130. u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly =
  131. { [0 ... NR_CPUS-1] = BAD_APICID };
  132. static void map_cpu_to_logical_apicid(void)
  133. {
  134. int cpu = smp_processor_id();
  135. int apicid = logical_smp_processor_id();
  136. int node = apic->apicid_to_node(apicid);
  137. if (!node_online(node))
  138. node = first_online_node;
  139. cpu_2_logical_apicid[cpu] = apicid;
  140. map_cpu_to_node(cpu, node);
  141. }
  142. void numa_remove_cpu(int cpu)
  143. {
  144. cpu_2_logical_apicid[cpu] = BAD_APICID;
  145. unmap_cpu_to_node(cpu);
  146. }
  147. #else
  148. #define map_cpu_to_logical_apicid() do {} while (0)
  149. #endif
  150. /*
  151. * Report back to the Boot Processor.
  152. * Running on AP.
  153. */
  154. static void __cpuinit smp_callin(void)
  155. {
  156. int cpuid, phys_id;
  157. unsigned long timeout;
  158. /*
  159. * If waken up by an INIT in an 82489DX configuration
  160. * we may get here before an INIT-deassert IPI reaches
  161. * our local APIC. We have to wait for the IPI or we'll
  162. * lock up on an APIC access.
  163. */
  164. if (apic->wait_for_init_deassert)
  165. apic->wait_for_init_deassert(&init_deasserted);
  166. /*
  167. * (This works even if the APIC is not enabled.)
  168. */
  169. phys_id = read_apic_id();
  170. cpuid = smp_processor_id();
  171. if (cpumask_test_cpu(cpuid, cpu_callin_mask)) {
  172. panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
  173. phys_id, cpuid);
  174. }
  175. pr_debug("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
  176. /*
  177. * STARTUP IPIs are fragile beasts as they might sometimes
  178. * trigger some glue motherboard logic. Complete APIC bus
  179. * silence for 1 second, this overestimates the time the
  180. * boot CPU is spending to send the up to 2 STARTUP IPIs
  181. * by a factor of two. This should be enough.
  182. */
  183. /*
  184. * Waiting 2s total for startup (udelay is not yet working)
  185. */
  186. timeout = jiffies + 2*HZ;
  187. while (time_before(jiffies, timeout)) {
  188. /*
  189. * Has the boot CPU finished it's STARTUP sequence?
  190. */
  191. if (cpumask_test_cpu(cpuid, cpu_callout_mask))
  192. break;
  193. cpu_relax();
  194. }
  195. if (!time_before(jiffies, timeout)) {
  196. panic("%s: CPU%d started up but did not get a callout!\n",
  197. __func__, cpuid);
  198. }
  199. /*
  200. * the boot CPU has finished the init stage and is spinning
  201. * on callin_map until we finish. We are free to set up this
  202. * CPU, first the APIC. (this is probably redundant on most
  203. * boards)
  204. */
  205. pr_debug("CALLIN, before setup_local_APIC().\n");
  206. if (apic->smp_callin_clear_local_apic)
  207. apic->smp_callin_clear_local_apic();
  208. setup_local_APIC();
  209. end_local_APIC_setup();
  210. map_cpu_to_logical_apicid();
  211. notify_cpu_starting(cpuid);
  212. /*
  213. * Get our bogomips.
  214. *
  215. * Need to enable IRQs because it can take longer and then
  216. * the NMI watchdog might kill us.
  217. */
  218. local_irq_enable();
  219. calibrate_delay();
  220. local_irq_disable();
  221. pr_debug("Stack at about %p\n", &cpuid);
  222. /*
  223. * Save our processor parameters
  224. */
  225. smp_store_cpu_info(cpuid);
  226. /*
  227. * Allow the master to continue.
  228. */
  229. cpumask_set_cpu(cpuid, cpu_callin_mask);
  230. }
  231. /*
  232. * Activate a secondary processor.
  233. */
  234. notrace static void __cpuinit start_secondary(void *unused)
  235. {
  236. /*
  237. * Don't put *anything* before cpu_init(), SMP booting is too
  238. * fragile that we want to limit the things done here to the
  239. * most necessary things.
  240. */
  241. vmi_bringup();
  242. cpu_init();
  243. preempt_disable();
  244. smp_callin();
  245. /* otherwise gcc will move up smp_processor_id before the cpu_init */
  246. barrier();
  247. /*
  248. * Check TSC synchronization with the BP:
  249. */
  250. check_tsc_sync_target();
  251. if (nmi_watchdog == NMI_IO_APIC) {
  252. disable_8259A_irq(0);
  253. enable_NMI_through_LVT0();
  254. enable_8259A_irq(0);
  255. }
  256. #ifdef CONFIG_X86_32
  257. while (low_mappings)
  258. cpu_relax();
  259. __flush_tlb_all();
  260. #endif
  261. /* This must be done before setting cpu_online_mask */
  262. set_cpu_sibling_map(raw_smp_processor_id());
  263. wmb();
  264. /*
  265. * We need to hold call_lock, so there is no inconsistency
  266. * between the time smp_call_function() determines number of
  267. * IPI recipients, and the time when the determination is made
  268. * for which cpus receive the IPI. Holding this
  269. * lock helps us to not include this cpu in a currently in progress
  270. * smp_call_function().
  271. *
  272. * We need to hold vector_lock so there the set of online cpus
  273. * does not change while we are assigning vectors to cpus. Holding
  274. * this lock ensures we don't half assign or remove an irq from a cpu.
  275. */
  276. ipi_call_lock();
  277. lock_vector_lock();
  278. __setup_vector_irq(smp_processor_id());
  279. set_cpu_online(smp_processor_id(), true);
  280. unlock_vector_lock();
  281. ipi_call_unlock();
  282. per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
  283. /* enable local interrupts */
  284. local_irq_enable();
  285. setup_secondary_clock();
  286. wmb();
  287. cpu_idle();
  288. }
  289. #ifdef CONFIG_CPUMASK_OFFSTACK
  290. /* In this case, llc_shared_map is a pointer to a cpumask. */
  291. static inline void copy_cpuinfo_x86(struct cpuinfo_x86 *dst,
  292. const struct cpuinfo_x86 *src)
  293. {
  294. struct cpumask *llc = dst->llc_shared_map;
  295. *dst = *src;
  296. dst->llc_shared_map = llc;
  297. }
  298. #else
  299. static inline void copy_cpuinfo_x86(struct cpuinfo_x86 *dst,
  300. const struct cpuinfo_x86 *src)
  301. {
  302. *dst = *src;
  303. }
  304. #endif /* CONFIG_CPUMASK_OFFSTACK */
  305. /*
  306. * The bootstrap kernel entry code has set these up. Save them for
  307. * a given CPU
  308. */
  309. void __cpuinit smp_store_cpu_info(int id)
  310. {
  311. struct cpuinfo_x86 *c = &cpu_data(id);
  312. copy_cpuinfo_x86(c, &boot_cpu_data);
  313. c->cpu_index = id;
  314. if (id != 0)
  315. identify_secondary_cpu(c);
  316. }
  317. void __cpuinit set_cpu_sibling_map(int cpu)
  318. {
  319. int i;
  320. struct cpuinfo_x86 *c = &cpu_data(cpu);
  321. cpumask_set_cpu(cpu, cpu_sibling_setup_mask);
  322. if (smp_num_siblings > 1) {
  323. for_each_cpu(i, cpu_sibling_setup_mask) {
  324. struct cpuinfo_x86 *o = &cpu_data(i);
  325. if (c->phys_proc_id == o->phys_proc_id &&
  326. c->cpu_core_id == o->cpu_core_id) {
  327. cpumask_set_cpu(i, cpu_sibling_mask(cpu));
  328. cpumask_set_cpu(cpu, cpu_sibling_mask(i));
  329. cpumask_set_cpu(i, cpu_core_mask(cpu));
  330. cpumask_set_cpu(cpu, cpu_core_mask(i));
  331. cpumask_set_cpu(i, c->llc_shared_map);
  332. cpumask_set_cpu(cpu, o->llc_shared_map);
  333. }
  334. }
  335. } else {
  336. cpumask_set_cpu(cpu, cpu_sibling_mask(cpu));
  337. }
  338. cpumask_set_cpu(cpu, c->llc_shared_map);
  339. if (current_cpu_data.x86_max_cores == 1) {
  340. cpumask_copy(cpu_core_mask(cpu), cpu_sibling_mask(cpu));
  341. c->booted_cores = 1;
  342. return;
  343. }
  344. for_each_cpu(i, cpu_sibling_setup_mask) {
  345. if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
  346. per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
  347. cpumask_set_cpu(i, c->llc_shared_map);
  348. cpumask_set_cpu(cpu, cpu_data(i).llc_shared_map);
  349. }
  350. if (c->phys_proc_id == cpu_data(i).phys_proc_id) {
  351. cpumask_set_cpu(i, cpu_core_mask(cpu));
  352. cpumask_set_cpu(cpu, cpu_core_mask(i));
  353. /*
  354. * Does this new cpu bringup a new core?
  355. */
  356. if (cpumask_weight(cpu_sibling_mask(cpu)) == 1) {
  357. /*
  358. * for each core in package, increment
  359. * the booted_cores for this new cpu
  360. */
  361. if (cpumask_first(cpu_sibling_mask(i)) == i)
  362. c->booted_cores++;
  363. /*
  364. * increment the core count for all
  365. * the other cpus in this package
  366. */
  367. if (i != cpu)
  368. cpu_data(i).booted_cores++;
  369. } else if (i != cpu && !c->booted_cores)
  370. c->booted_cores = cpu_data(i).booted_cores;
  371. }
  372. }
  373. }
  374. /* maps the cpu to the sched domain representing multi-core */
  375. const struct cpumask *cpu_coregroup_mask(int cpu)
  376. {
  377. struct cpuinfo_x86 *c = &cpu_data(cpu);
  378. /*
  379. * For perf, we return last level cache shared map.
  380. * And for power savings, we return cpu_core_map
  381. */
  382. if (sched_mc_power_savings || sched_smt_power_savings)
  383. return cpu_core_mask(cpu);
  384. else
  385. return c->llc_shared_map;
  386. }
  387. static void impress_friends(void)
  388. {
  389. int cpu;
  390. unsigned long bogosum = 0;
  391. /*
  392. * Allow the user to impress friends.
  393. */
  394. pr_debug("Before bogomips.\n");
  395. for_each_possible_cpu(cpu)
  396. if (cpumask_test_cpu(cpu, cpu_callout_mask))
  397. bogosum += cpu_data(cpu).loops_per_jiffy;
  398. printk(KERN_INFO
  399. "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
  400. num_online_cpus(),
  401. bogosum/(500000/HZ),
  402. (bogosum/(5000/HZ))%100);
  403. pr_debug("Before bogocount - setting activated=1.\n");
  404. }
  405. void __inquire_remote_apic(int apicid)
  406. {
  407. unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
  408. char *names[] = { "ID", "VERSION", "SPIV" };
  409. int timeout;
  410. u32 status;
  411. printk(KERN_INFO "Inquiring remote APIC 0x%x...\n", apicid);
  412. for (i = 0; i < ARRAY_SIZE(regs); i++) {
  413. printk(KERN_INFO "... APIC 0x%x %s: ", apicid, names[i]);
  414. /*
  415. * Wait for idle.
  416. */
  417. status = safe_apic_wait_icr_idle();
  418. if (status)
  419. printk(KERN_CONT
  420. "a previous APIC delivery may have failed\n");
  421. apic_icr_write(APIC_DM_REMRD | regs[i], apicid);
  422. timeout = 0;
  423. do {
  424. udelay(100);
  425. status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK;
  426. } while (status == APIC_ICR_RR_INPROG && timeout++ < 1000);
  427. switch (status) {
  428. case APIC_ICR_RR_VALID:
  429. status = apic_read(APIC_RRR);
  430. printk(KERN_CONT "%08x\n", status);
  431. break;
  432. default:
  433. printk(KERN_CONT "failed\n");
  434. }
  435. }
  436. }
  437. /*
  438. * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
  439. * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
  440. * won't ... remember to clear down the APIC, etc later.
  441. */
  442. int __devinit
  443. wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip)
  444. {
  445. unsigned long send_status, accept_status = 0;
  446. int maxlvt;
  447. /* Target chip */
  448. /* Boot on the stack */
  449. /* Kick the second */
  450. apic_icr_write(APIC_DM_NMI | apic->dest_logical, logical_apicid);
  451. pr_debug("Waiting for send to finish...\n");
  452. send_status = safe_apic_wait_icr_idle();
  453. /*
  454. * Give the other CPU some time to accept the IPI.
  455. */
  456. udelay(200);
  457. if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
  458. maxlvt = lapic_get_maxlvt();
  459. if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
  460. apic_write(APIC_ESR, 0);
  461. accept_status = (apic_read(APIC_ESR) & 0xEF);
  462. }
  463. pr_debug("NMI sent.\n");
  464. if (send_status)
  465. printk(KERN_ERR "APIC never delivered???\n");
  466. if (accept_status)
  467. printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
  468. return (send_status | accept_status);
  469. }
  470. int __devinit
  471. wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
  472. {
  473. unsigned long send_status, accept_status = 0;
  474. int maxlvt, num_starts, j;
  475. maxlvt = lapic_get_maxlvt();
  476. /*
  477. * Be paranoid about clearing APIC errors.
  478. */
  479. if (APIC_INTEGRATED(apic_version[phys_apicid])) {
  480. if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
  481. apic_write(APIC_ESR, 0);
  482. apic_read(APIC_ESR);
  483. }
  484. pr_debug("Asserting INIT.\n");
  485. /*
  486. * Turn INIT on target chip
  487. */
  488. /*
  489. * Send IPI
  490. */
  491. apic_icr_write(APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT,
  492. phys_apicid);
  493. pr_debug("Waiting for send to finish...\n");
  494. send_status = safe_apic_wait_icr_idle();
  495. mdelay(10);
  496. pr_debug("Deasserting INIT.\n");
  497. /* Target chip */
  498. /* Send IPI */
  499. apic_icr_write(APIC_INT_LEVELTRIG | APIC_DM_INIT, phys_apicid);
  500. pr_debug("Waiting for send to finish...\n");
  501. send_status = safe_apic_wait_icr_idle();
  502. mb();
  503. atomic_set(&init_deasserted, 1);
  504. /*
  505. * Should we send STARTUP IPIs ?
  506. *
  507. * Determine this based on the APIC version.
  508. * If we don't have an integrated APIC, don't send the STARTUP IPIs.
  509. */
  510. if (APIC_INTEGRATED(apic_version[phys_apicid]))
  511. num_starts = 2;
  512. else
  513. num_starts = 0;
  514. /*
  515. * Paravirt / VMI wants a startup IPI hook here to set up the
  516. * target processor state.
  517. */
  518. startup_ipi_hook(phys_apicid, (unsigned long) start_secondary,
  519. (unsigned long)stack_start.sp);
  520. /*
  521. * Run STARTUP IPI loop.
  522. */
  523. pr_debug("#startup loops: %d.\n", num_starts);
  524. for (j = 1; j <= num_starts; j++) {
  525. pr_debug("Sending STARTUP #%d.\n", j);
  526. if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
  527. apic_write(APIC_ESR, 0);
  528. apic_read(APIC_ESR);
  529. pr_debug("After apic_write.\n");
  530. /*
  531. * STARTUP IPI
  532. */
  533. /* Target chip */
  534. /* Boot on the stack */
  535. /* Kick the second */
  536. apic_icr_write(APIC_DM_STARTUP | (start_eip >> 12),
  537. phys_apicid);
  538. /*
  539. * Give the other CPU some time to accept the IPI.
  540. */
  541. udelay(300);
  542. pr_debug("Startup point 1.\n");
  543. pr_debug("Waiting for send to finish...\n");
  544. send_status = safe_apic_wait_icr_idle();
  545. /*
  546. * Give the other CPU some time to accept the IPI.
  547. */
  548. udelay(200);
  549. if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
  550. apic_write(APIC_ESR, 0);
  551. accept_status = (apic_read(APIC_ESR) & 0xEF);
  552. if (send_status || accept_status)
  553. break;
  554. }
  555. pr_debug("After Startup.\n");
  556. if (send_status)
  557. printk(KERN_ERR "APIC never delivered???\n");
  558. if (accept_status)
  559. printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
  560. return (send_status | accept_status);
  561. }
  562. struct create_idle {
  563. struct work_struct work;
  564. struct task_struct *idle;
  565. struct completion done;
  566. int cpu;
  567. };
  568. static void __cpuinit do_fork_idle(struct work_struct *work)
  569. {
  570. struct create_idle *c_idle =
  571. container_of(work, struct create_idle, work);
  572. c_idle->idle = fork_idle(c_idle->cpu);
  573. complete(&c_idle->done);
  574. }
  575. /*
  576. * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
  577. * (ie clustered apic addressing mode), this is a LOGICAL apic ID.
  578. * Returns zero if CPU booted OK, else error code from
  579. * ->wakeup_secondary_cpu.
  580. */
  581. static int __cpuinit do_boot_cpu(int apicid, int cpu)
  582. {
  583. unsigned long boot_error = 0;
  584. unsigned long start_ip;
  585. int timeout;
  586. struct create_idle c_idle = {
  587. .cpu = cpu,
  588. .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
  589. };
  590. INIT_WORK(&c_idle.work, do_fork_idle);
  591. alternatives_smp_switch(1);
  592. c_idle.idle = get_idle_for_cpu(cpu);
  593. /*
  594. * We can't use kernel_thread since we must avoid to
  595. * reschedule the child.
  596. */
  597. if (c_idle.idle) {
  598. c_idle.idle->thread.sp = (unsigned long) (((struct pt_regs *)
  599. (THREAD_SIZE + task_stack_page(c_idle.idle))) - 1);
  600. init_idle(c_idle.idle, cpu);
  601. goto do_rest;
  602. }
  603. if (!keventd_up() || current_is_keventd())
  604. c_idle.work.func(&c_idle.work);
  605. else {
  606. schedule_work(&c_idle.work);
  607. wait_for_completion(&c_idle.done);
  608. }
  609. if (IS_ERR(c_idle.idle)) {
  610. printk("failed fork for CPU %d\n", cpu);
  611. return PTR_ERR(c_idle.idle);
  612. }
  613. set_idle_for_cpu(cpu, c_idle.idle);
  614. do_rest:
  615. per_cpu(current_task, cpu) = c_idle.idle;
  616. #ifdef CONFIG_X86_32
  617. /* Stack for startup_32 can be just as for start_secondary onwards */
  618. irq_ctx_init(cpu);
  619. #else
  620. clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
  621. initial_gs = per_cpu_offset(cpu);
  622. per_cpu(kernel_stack, cpu) =
  623. (unsigned long)task_stack_page(c_idle.idle) -
  624. KERNEL_STACK_OFFSET + THREAD_SIZE;
  625. #endif
  626. early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
  627. initial_code = (unsigned long)start_secondary;
  628. stack_start.sp = (void *) c_idle.idle->thread.sp;
  629. /* start_ip had better be page-aligned! */
  630. start_ip = setup_trampoline();
  631. /* So we see what's up */
  632. printk(KERN_INFO "Booting processor %d APIC 0x%x ip 0x%lx\n",
  633. cpu, apicid, start_ip);
  634. /*
  635. * This grunge runs the startup process for
  636. * the targeted processor.
  637. */
  638. atomic_set(&init_deasserted, 0);
  639. if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
  640. pr_debug("Setting warm reset code and vector.\n");
  641. smpboot_setup_warm_reset_vector(start_ip);
  642. /*
  643. * Be paranoid about clearing APIC errors.
  644. */
  645. if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
  646. apic_write(APIC_ESR, 0);
  647. apic_read(APIC_ESR);
  648. }
  649. }
  650. /*
  651. * Kick the secondary CPU. Use the method in the APIC driver
  652. * if it's defined - or use an INIT boot APIC message otherwise:
  653. */
  654. if (apic->wakeup_secondary_cpu)
  655. boot_error = apic->wakeup_secondary_cpu(apicid, start_ip);
  656. else
  657. boot_error = wakeup_secondary_cpu_via_init(apicid, start_ip);
  658. if (!boot_error) {
  659. /*
  660. * allow APs to start initializing.
  661. */
  662. pr_debug("Before Callout %d.\n", cpu);
  663. cpumask_set_cpu(cpu, cpu_callout_mask);
  664. pr_debug("After Callout %d.\n", cpu);
  665. /*
  666. * Wait 5s total for a response
  667. */
  668. for (timeout = 0; timeout < 50000; timeout++) {
  669. if (cpumask_test_cpu(cpu, cpu_callin_mask))
  670. break; /* It has booted */
  671. udelay(100);
  672. }
  673. if (cpumask_test_cpu(cpu, cpu_callin_mask)) {
  674. /* number CPUs logically, starting from 1 (BSP is 0) */
  675. pr_debug("OK.\n");
  676. printk(KERN_INFO "CPU%d: ", cpu);
  677. print_cpu_info(&cpu_data(cpu));
  678. pr_debug("CPU has booted.\n");
  679. } else {
  680. boot_error = 1;
  681. if (*((volatile unsigned char *)trampoline_base)
  682. == 0xA5)
  683. /* trampoline started but...? */
  684. printk(KERN_ERR "Stuck ??\n");
  685. else
  686. /* trampoline code not run */
  687. printk(KERN_ERR "Not responding.\n");
  688. if (apic->inquire_remote_apic)
  689. apic->inquire_remote_apic(apicid);
  690. }
  691. }
  692. if (boot_error) {
  693. /* Try to put things back the way they were before ... */
  694. numa_remove_cpu(cpu); /* was set by numa_add_cpu */
  695. /* was set by do_boot_cpu() */
  696. cpumask_clear_cpu(cpu, cpu_callout_mask);
  697. /* was set by cpu_init() */
  698. cpumask_clear_cpu(cpu, cpu_initialized_mask);
  699. set_cpu_present(cpu, false);
  700. per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID;
  701. }
  702. /* mark "stuck" area as not stuck */
  703. *((volatile unsigned long *)trampoline_base) = 0;
  704. /*
  705. * Cleanup possible dangling ends...
  706. */
  707. smpboot_restore_warm_reset_vector();
  708. return boot_error;
  709. }
  710. int __cpuinit native_cpu_up(unsigned int cpu)
  711. {
  712. int apicid = apic->cpu_present_to_apicid(cpu);
  713. unsigned long flags;
  714. int err;
  715. WARN_ON(irqs_disabled());
  716. pr_debug("++++++++++++++++++++=_---CPU UP %u\n", cpu);
  717. if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
  718. !physid_isset(apicid, phys_cpu_present_map)) {
  719. printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu);
  720. return -EINVAL;
  721. }
  722. /*
  723. * Already booted CPU?
  724. */
  725. if (cpumask_test_cpu(cpu, cpu_callin_mask)) {
  726. pr_debug("do_boot_cpu %d Already started\n", cpu);
  727. return -ENOSYS;
  728. }
  729. /*
  730. * Save current MTRR state in case it was changed since early boot
  731. * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync:
  732. */
  733. mtrr_save_state();
  734. per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
  735. #ifdef CONFIG_X86_32
  736. /* init low mem mapping */
  737. clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY,
  738. min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
  739. flush_tlb_all();
  740. low_mappings = 1;
  741. err = do_boot_cpu(apicid, cpu);
  742. zap_low_mappings();
  743. low_mappings = 0;
  744. #else
  745. err = do_boot_cpu(apicid, cpu);
  746. #endif
  747. if (err) {
  748. pr_debug("do_boot_cpu failed %d\n", err);
  749. return -EIO;
  750. }
  751. /*
  752. * Check TSC synchronization with the AP (keep irqs disabled
  753. * while doing so):
  754. */
  755. local_irq_save(flags);
  756. check_tsc_sync_source(cpu);
  757. local_irq_restore(flags);
  758. while (!cpu_online(cpu)) {
  759. cpu_relax();
  760. touch_nmi_watchdog();
  761. }
  762. return 0;
  763. }
  764. /*
  765. * Fall back to non SMP mode after errors.
  766. *
  767. * RED-PEN audit/test this more. I bet there is more state messed up here.
  768. */
  769. static __init void disable_smp(void)
  770. {
  771. init_cpu_present(cpumask_of(0));
  772. init_cpu_possible(cpumask_of(0));
  773. smpboot_clear_io_apic_irqs();
  774. if (smp_found_config)
  775. physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
  776. else
  777. physid_set_mask_of_physid(0, &phys_cpu_present_map);
  778. map_cpu_to_logical_apicid();
  779. cpumask_set_cpu(0, cpu_sibling_mask(0));
  780. cpumask_set_cpu(0, cpu_core_mask(0));
  781. }
  782. /*
  783. * Various sanity checks.
  784. */
  785. static int __init smp_sanity_check(unsigned max_cpus)
  786. {
  787. preempt_disable();
  788. #if !defined(CONFIG_X86_BIGSMP) && defined(CONFIG_X86_32)
  789. if (def_to_bigsmp && nr_cpu_ids > 8) {
  790. unsigned int cpu;
  791. unsigned nr;
  792. printk(KERN_WARNING
  793. "More than 8 CPUs detected - skipping them.\n"
  794. "Use CONFIG_X86_BIGSMP.\n");
  795. nr = 0;
  796. for_each_present_cpu(cpu) {
  797. if (nr >= 8)
  798. set_cpu_present(cpu, false);
  799. nr++;
  800. }
  801. nr = 0;
  802. for_each_possible_cpu(cpu) {
  803. if (nr >= 8)
  804. set_cpu_possible(cpu, false);
  805. nr++;
  806. }
  807. nr_cpu_ids = 8;
  808. }
  809. #endif
  810. if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
  811. printk(KERN_WARNING
  812. "weird, boot CPU (#%d) not listed by the BIOS.\n",
  813. hard_smp_processor_id());
  814. physid_set(hard_smp_processor_id(), phys_cpu_present_map);
  815. }
  816. /*
  817. * If we couldn't find an SMP configuration at boot time,
  818. * get out of here now!
  819. */
  820. if (!smp_found_config && !acpi_lapic) {
  821. preempt_enable();
  822. printk(KERN_NOTICE "SMP motherboard not detected.\n");
  823. disable_smp();
  824. if (APIC_init_uniprocessor())
  825. printk(KERN_NOTICE "Local APIC not detected."
  826. " Using dummy APIC emulation.\n");
  827. return -1;
  828. }
  829. /*
  830. * Should not be necessary because the MP table should list the boot
  831. * CPU too, but we do it for the sake of robustness anyway.
  832. */
  833. if (!apic->check_phys_apicid_present(boot_cpu_physical_apicid)) {
  834. printk(KERN_NOTICE
  835. "weird, boot CPU (#%d) not listed by the BIOS.\n",
  836. boot_cpu_physical_apicid);
  837. physid_set(hard_smp_processor_id(), phys_cpu_present_map);
  838. }
  839. preempt_enable();
  840. /*
  841. * If we couldn't find a local APIC, then get out of here now!
  842. */
  843. if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
  844. !cpu_has_apic) {
  845. printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
  846. boot_cpu_physical_apicid);
  847. printk(KERN_ERR "... forcing use of dummy APIC emulation."
  848. "(tell your hw vendor)\n");
  849. smpboot_clear_io_apic();
  850. arch_disable_smp_support();
  851. return -1;
  852. }
  853. verify_local_APIC();
  854. /*
  855. * If SMP should be disabled, then really disable it!
  856. */
  857. if (!max_cpus) {
  858. printk(KERN_INFO "SMP mode deactivated.\n");
  859. smpboot_clear_io_apic();
  860. localise_nmi_watchdog();
  861. connect_bsp_APIC();
  862. setup_local_APIC();
  863. end_local_APIC_setup();
  864. return -1;
  865. }
  866. return 0;
  867. }
  868. static void __init smp_cpu_index_default(void)
  869. {
  870. int i;
  871. struct cpuinfo_x86 *c;
  872. for_each_possible_cpu(i) {
  873. c = &cpu_data(i);
  874. /* mark all to hotplug */
  875. c->cpu_index = nr_cpu_ids;
  876. }
  877. }
  878. /*
  879. * Prepare for SMP bootup. The MP table or ACPI has been read
  880. * earlier. Just do some sanity checking here and enable APIC mode.
  881. */
  882. void __init native_smp_prepare_cpus(unsigned int max_cpus)
  883. {
  884. unsigned int i;
  885. preempt_disable();
  886. smp_cpu_index_default();
  887. current_cpu_data = boot_cpu_data;
  888. cpumask_copy(cpu_callin_mask, cpumask_of(0));
  889. mb();
  890. /*
  891. * Setup boot CPU information
  892. */
  893. smp_store_cpu_info(0); /* Final full version of the data */
  894. #ifdef CONFIG_X86_32
  895. boot_cpu_logical_apicid = logical_smp_processor_id();
  896. #endif
  897. current_thread_info()->cpu = 0; /* needed? */
  898. for_each_possible_cpu(i) {
  899. alloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL);
  900. alloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL);
  901. alloc_cpumask_var(&cpu_data(i).llc_shared_map, GFP_KERNEL);
  902. cpumask_clear(per_cpu(cpu_core_map, i));
  903. cpumask_clear(per_cpu(cpu_sibling_map, i));
  904. cpumask_clear(cpu_data(i).llc_shared_map);
  905. }
  906. set_cpu_sibling_map(0);
  907. enable_IR_x2apic();
  908. #ifdef CONFIG_X86_64
  909. default_setup_apic_routing();
  910. #endif
  911. if (smp_sanity_check(max_cpus) < 0) {
  912. printk(KERN_INFO "SMP disabled\n");
  913. disable_smp();
  914. goto out;
  915. }
  916. preempt_disable();
  917. if (read_apic_id() != boot_cpu_physical_apicid) {
  918. panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
  919. read_apic_id(), boot_cpu_physical_apicid);
  920. /* Or can we switch back to PIC here? */
  921. }
  922. preempt_enable();
  923. connect_bsp_APIC();
  924. /*
  925. * Switch from PIC to APIC mode.
  926. */
  927. setup_local_APIC();
  928. /*
  929. * Enable IO APIC before setting up error vector
  930. */
  931. if (!skip_ioapic_setup && nr_ioapics)
  932. enable_IO_APIC();
  933. end_local_APIC_setup();
  934. map_cpu_to_logical_apicid();
  935. if (apic->setup_portio_remap)
  936. apic->setup_portio_remap();
  937. smpboot_setup_io_apic();
  938. /*
  939. * Set up local APIC timer on boot CPU.
  940. */
  941. printk(KERN_INFO "CPU%d: ", 0);
  942. print_cpu_info(&cpu_data(0));
  943. setup_boot_clock();
  944. if (is_uv_system())
  945. uv_system_init();
  946. out:
  947. preempt_enable();
  948. }
  949. /*
  950. * Early setup to make printk work.
  951. */
  952. void __init native_smp_prepare_boot_cpu(void)
  953. {
  954. int me = smp_processor_id();
  955. switch_to_new_gdt(me);
  956. /* already set me in cpu_online_mask in boot_cpu_init() */
  957. cpumask_set_cpu(me, cpu_callout_mask);
  958. per_cpu(cpu_state, me) = CPU_ONLINE;
  959. }
  960. void __init native_smp_cpus_done(unsigned int max_cpus)
  961. {
  962. pr_debug("Boot done.\n");
  963. impress_friends();
  964. #ifdef CONFIG_X86_IO_APIC
  965. setup_ioapic_dest();
  966. #endif
  967. check_nmi_watchdog();
  968. }
  969. static int __initdata setup_possible_cpus = -1;
  970. static int __init _setup_possible_cpus(char *str)
  971. {
  972. get_option(&str, &setup_possible_cpus);
  973. return 0;
  974. }
  975. early_param("possible_cpus", _setup_possible_cpus);
  976. /*
  977. * cpu_possible_mask should be static, it cannot change as cpu's
  978. * are onlined, or offlined. The reason is per-cpu data-structures
  979. * are allocated by some modules at init time, and dont expect to
  980. * do this dynamically on cpu arrival/departure.
  981. * cpu_present_mask on the other hand can change dynamically.
  982. * In case when cpu_hotplug is not compiled, then we resort to current
  983. * behaviour, which is cpu_possible == cpu_present.
  984. * - Ashok Raj
  985. *
  986. * Three ways to find out the number of additional hotplug CPUs:
  987. * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
  988. * - The user can overwrite it with possible_cpus=NUM
  989. * - Otherwise don't reserve additional CPUs.
  990. * We do this because additional CPUs waste a lot of memory.
  991. * -AK
  992. */
  993. __init void prefill_possible_map(void)
  994. {
  995. int i, possible;
  996. /* no processor from mptable or madt */
  997. if (!num_processors)
  998. num_processors = 1;
  999. if (setup_possible_cpus == -1)
  1000. possible = num_processors + disabled_cpus;
  1001. else
  1002. possible = setup_possible_cpus;
  1003. total_cpus = max_t(int, possible, num_processors + disabled_cpus);
  1004. if (possible > CONFIG_NR_CPUS) {
  1005. printk(KERN_WARNING
  1006. "%d Processors exceeds NR_CPUS limit of %d\n",
  1007. possible, CONFIG_NR_CPUS);
  1008. possible = CONFIG_NR_CPUS;
  1009. }
  1010. printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
  1011. possible, max_t(int, possible - num_processors, 0));
  1012. for (i = 0; i < possible; i++)
  1013. set_cpu_possible(i, true);
  1014. nr_cpu_ids = possible;
  1015. }
  1016. #ifdef CONFIG_HOTPLUG_CPU
  1017. static void remove_siblinginfo(int cpu)
  1018. {
  1019. int sibling;
  1020. struct cpuinfo_x86 *c = &cpu_data(cpu);
  1021. for_each_cpu(sibling, cpu_core_mask(cpu)) {
  1022. cpumask_clear_cpu(cpu, cpu_core_mask(sibling));
  1023. /*/
  1024. * last thread sibling in this cpu core going down
  1025. */
  1026. if (cpumask_weight(cpu_sibling_mask(cpu)) == 1)
  1027. cpu_data(sibling).booted_cores--;
  1028. }
  1029. for_each_cpu(sibling, cpu_sibling_mask(cpu))
  1030. cpumask_clear_cpu(cpu, cpu_sibling_mask(sibling));
  1031. cpumask_clear(cpu_sibling_mask(cpu));
  1032. cpumask_clear(cpu_core_mask(cpu));
  1033. c->phys_proc_id = 0;
  1034. c->cpu_core_id = 0;
  1035. cpumask_clear_cpu(cpu, cpu_sibling_setup_mask);
  1036. }
  1037. static void __ref remove_cpu_from_maps(int cpu)
  1038. {
  1039. set_cpu_online(cpu, false);
  1040. cpumask_clear_cpu(cpu, cpu_callout_mask);
  1041. cpumask_clear_cpu(cpu, cpu_callin_mask);
  1042. /* was set by cpu_init() */
  1043. cpumask_clear_cpu(cpu, cpu_initialized_mask);
  1044. numa_remove_cpu(cpu);
  1045. }
  1046. void cpu_disable_common(void)
  1047. {
  1048. int cpu = smp_processor_id();
  1049. /*
  1050. * HACK:
  1051. * Allow any queued timer interrupts to get serviced
  1052. * This is only a temporary solution until we cleanup
  1053. * fixup_irqs as we do for IA64.
  1054. */
  1055. local_irq_enable();
  1056. mdelay(1);
  1057. local_irq_disable();
  1058. remove_siblinginfo(cpu);
  1059. /* It's now safe to remove this processor from the online map */
  1060. lock_vector_lock();
  1061. remove_cpu_from_maps(cpu);
  1062. unlock_vector_lock();
  1063. fixup_irqs();
  1064. }
  1065. int native_cpu_disable(void)
  1066. {
  1067. int cpu = smp_processor_id();
  1068. /*
  1069. * Perhaps use cpufreq to drop frequency, but that could go
  1070. * into generic code.
  1071. *
  1072. * We won't take down the boot processor on i386 due to some
  1073. * interrupts only being able to be serviced by the BSP.
  1074. * Especially so if we're not using an IOAPIC -zwane
  1075. */
  1076. if (cpu == 0)
  1077. return -EBUSY;
  1078. if (nmi_watchdog == NMI_LOCAL_APIC)
  1079. stop_apic_nmi_watchdog(NULL);
  1080. clear_local_APIC();
  1081. cpu_disable_common();
  1082. return 0;
  1083. }
  1084. void native_cpu_die(unsigned int cpu)
  1085. {
  1086. /* We don't do anything here: idle task is faking death itself. */
  1087. unsigned int i;
  1088. for (i = 0; i < 10; i++) {
  1089. /* They ack this in play_dead by setting CPU_DEAD */
  1090. if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
  1091. printk(KERN_INFO "CPU %d is now offline\n", cpu);
  1092. if (1 == num_online_cpus())
  1093. alternatives_smp_switch(0);
  1094. return;
  1095. }
  1096. msleep(100);
  1097. }
  1098. printk(KERN_ERR "CPU %u didn't die...\n", cpu);
  1099. }
  1100. void play_dead_common(void)
  1101. {
  1102. idle_task_exit();
  1103. reset_lazy_tlbstate();
  1104. irq_ctx_exit(raw_smp_processor_id());
  1105. c1e_remove_cpu(raw_smp_processor_id());
  1106. mb();
  1107. /* Ack it */
  1108. __get_cpu_var(cpu_state) = CPU_DEAD;
  1109. /*
  1110. * With physical CPU hotplug, we should halt the cpu
  1111. */
  1112. local_irq_disable();
  1113. }
  1114. void native_play_dead(void)
  1115. {
  1116. play_dead_common();
  1117. wbinvd_halt();
  1118. }
  1119. #else /* ... !CONFIG_HOTPLUG_CPU */
  1120. int native_cpu_disable(void)
  1121. {
  1122. return -ENOSYS;
  1123. }
  1124. void native_cpu_die(unsigned int cpu)
  1125. {
  1126. /* We said "no" in __cpu_disable */
  1127. BUG();
  1128. }
  1129. void native_play_dead(void)
  1130. {
  1131. BUG();
  1132. }
  1133. #endif