reg_8xx.h 1.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142
  1. /*
  2. * Contains register definitions common to PowerPC 8xx CPUs. Notice
  3. */
  4. #ifndef _ASM_POWERPC_REG_8xx_H
  5. #define _ASM_POWERPC_REG_8xx_H
  6. /* Cache control on the MPC8xx is provided through some additional
  7. * special purpose registers.
  8. */
  9. #define SPRN_IC_CST 560 /* Instruction cache control/status */
  10. #define SPRN_IC_ADR 561 /* Address needed for some commands */
  11. #define SPRN_IC_DAT 562 /* Read-only data register */
  12. #define SPRN_DC_CST 568 /* Data cache control/status */
  13. #define SPRN_DC_ADR 569 /* Address needed for some commands */
  14. #define SPRN_DC_DAT 570 /* Read-only data register */
  15. /* Commands. Only the first few are available to the instruction cache.
  16. */
  17. #define IDC_ENABLE 0x02000000 /* Cache enable */
  18. #define IDC_DISABLE 0x04000000 /* Cache disable */
  19. #define IDC_LDLCK 0x06000000 /* Load and lock */
  20. #define IDC_UNLINE 0x08000000 /* Unlock line */
  21. #define IDC_UNALL 0x0a000000 /* Unlock all */
  22. #define IDC_INVALL 0x0c000000 /* Invalidate all */
  23. #define DC_FLINE 0x0e000000 /* Flush data cache line */
  24. #define DC_SFWT 0x01000000 /* Set forced writethrough mode */
  25. #define DC_CFWT 0x03000000 /* Clear forced writethrough mode */
  26. #define DC_SLES 0x05000000 /* Set little endian swap mode */
  27. #define DC_CLES 0x07000000 /* Clear little endian swap mode */
  28. /* Status.
  29. */
  30. #define IDC_ENABLED 0x80000000 /* Cache is enabled */
  31. #define IDC_CERR1 0x00200000 /* Cache error 1 */
  32. #define IDC_CERR2 0x00100000 /* Cache error 2 */
  33. #define IDC_CERR3 0x00080000 /* Cache error 3 */
  34. #define DC_DFWT 0x40000000 /* Data cache is forced write through */
  35. #define DC_LES 0x20000000 /* Caches are little endian mode */
  36. #endif /* _ASM_POWERPC_REG_8xx_H */