board-csb637.c 3.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148
  1. /*
  2. * linux/arch/arm/mach-at91/board-csb637.c
  3. *
  4. * Copyright (C) 2005 SAN People
  5. *
  6. * This program is free software; you can redistribute it and/or modify
  7. * it under the terms of the GNU General Public License as published by
  8. * the Free Software Foundation; either version 2 of the License, or
  9. * (at your option) any later version.
  10. *
  11. * This program is distributed in the hope that it will be useful,
  12. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  14. * GNU General Public License for more details.
  15. *
  16. * You should have received a copy of the GNU General Public License
  17. * along with this program; if not, write to the Free Software
  18. * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  19. */
  20. #include <linux/types.h>
  21. #include <linux/init.h>
  22. #include <linux/mm.h>
  23. #include <linux/module.h>
  24. #include <linux/platform_device.h>
  25. #include <linux/mtd/physmap.h>
  26. #include <asm/setup.h>
  27. #include <asm/mach-types.h>
  28. #include <asm/irq.h>
  29. #include <asm/mach/arch.h>
  30. #include <asm/mach/map.h>
  31. #include <asm/mach/irq.h>
  32. #include <mach/hardware.h>
  33. #include <mach/board.h>
  34. #include <mach/gpio.h>
  35. #include "generic.h"
  36. static void __init csb637_map_io(void)
  37. {
  38. /* Initialize processor: 3.6864 MHz crystal */
  39. at91rm9200_initialize(3686400, AT91RM9200_BGA);
  40. /* DBGU on ttyS0. (Rx & Tx only) */
  41. at91_register_uart(0, 0, 0);
  42. /* make console=ttyS0 (ie, DBGU) the default */
  43. at91_set_serial_console(0);
  44. }
  45. static void __init csb637_init_irq(void)
  46. {
  47. at91rm9200_init_interrupts(NULL);
  48. }
  49. static struct at91_eth_data __initdata csb637_eth_data = {
  50. .phy_irq_pin = AT91_PIN_PC0,
  51. .is_rmii = 0,
  52. };
  53. static struct at91_usbh_data __initdata csb637_usbh_data = {
  54. .ports = 2,
  55. };
  56. static struct at91_udc_data __initdata csb637_udc_data = {
  57. .vbus_pin = AT91_PIN_PB28,
  58. .pullup_pin = AT91_PIN_PB1,
  59. };
  60. #define CSB_FLASH_BASE AT91_CHIPSELECT_0
  61. #define CSB_FLASH_SIZE SZ_16M
  62. static struct mtd_partition csb_flash_partitions[] = {
  63. {
  64. .name = "uMON flash",
  65. .offset = 0,
  66. .size = MTDPART_SIZ_FULL,
  67. .mask_flags = MTD_WRITEABLE, /* read only */
  68. }
  69. };
  70. static struct physmap_flash_data csb_flash_data = {
  71. .width = 2,
  72. .parts = csb_flash_partitions,
  73. .nr_parts = ARRAY_SIZE(csb_flash_partitions),
  74. };
  75. static struct resource csb_flash_resources[] = {
  76. {
  77. .start = CSB_FLASH_BASE,
  78. .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
  79. .flags = IORESOURCE_MEM,
  80. }
  81. };
  82. static struct platform_device csb_flash = {
  83. .name = "physmap-flash",
  84. .id = 0,
  85. .dev = {
  86. .platform_data = &csb_flash_data,
  87. },
  88. .resource = csb_flash_resources,
  89. .num_resources = ARRAY_SIZE(csb_flash_resources),
  90. };
  91. static struct gpio_led csb_leds[] = {
  92. { /* "d1", red */
  93. .name = "d1",
  94. .gpio = AT91_PIN_PB2,
  95. .active_low = 1,
  96. .default_trigger = "heartbeat",
  97. },
  98. };
  99. static void __init csb637_board_init(void)
  100. {
  101. /* LED(s) */
  102. at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
  103. /* Serial */
  104. at91_add_device_serial();
  105. /* Ethernet */
  106. at91_add_device_eth(&csb637_eth_data);
  107. /* USB Host */
  108. at91_add_device_usbh(&csb637_usbh_data);
  109. /* USB Device */
  110. at91_add_device_udc(&csb637_udc_data);
  111. /* I2C */
  112. at91_add_device_i2c(NULL, 0);
  113. /* SPI */
  114. at91_add_device_spi(NULL, 0);
  115. /* NOR flash */
  116. platform_device_register(&csb_flash);
  117. }
  118. MACHINE_START(CSB637, "Cogent CSB637")
  119. /* Maintainer: Bill Gatliff */
  120. .phys_io = AT91_BASE_SYS,
  121. .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
  122. .boot_params = AT91_SDRAM_BASE + 0x100,
  123. .timer = &at91rm9200_timer,
  124. .map_io = csb637_map_io,
  125. .init_irq = csb637_init_irq,
  126. .init_machine = csb637_board_init,
  127. MACHINE_END