ste-snowball.dts 5.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270
  1. /*
  2. * Copyright 2011 ST-Ericsson AB
  3. *
  4. * The code contained herein is licensed under the GNU General Public
  5. * License. You may obtain a copy of the GNU General Public License
  6. * Version 2 or later at the following locations:
  7. *
  8. * http://www.opensource.org/licenses/gpl-license.html
  9. * http://www.gnu.org/copyleft/gpl.html
  10. */
  11. /dts-v1/;
  12. #include "ste-dbx5x0.dtsi"
  13. / {
  14. model = "Calao Systems Snowball platform with device tree";
  15. compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
  16. memory {
  17. reg = <0x00000000 0x20000000>;
  18. };
  19. en_3v3_reg: en_3v3 {
  20. compatible = "regulator-fixed";
  21. regulator-name = "en-3v3-fixed-supply";
  22. regulator-min-microvolt = <3300000>;
  23. regulator-max-microvolt = <3300000>;
  24. /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
  25. gpio = <&ab8500_gpio 25 0x4>;
  26. startup-delay-us = <5000>;
  27. enable-active-high;
  28. };
  29. gpio_keys {
  30. compatible = "gpio-keys";
  31. #address-cells = <1>;
  32. #size-cells = <0>;
  33. button@1 {
  34. debounce_interval = <50>;
  35. wakeup = <1>;
  36. linux,code = <2>;
  37. label = "userpb";
  38. gpios = <&gpio1 0 0x4>;
  39. };
  40. button@2 {
  41. debounce_interval = <50>;
  42. wakeup = <1>;
  43. linux,code = <3>;
  44. label = "extkb1";
  45. gpios = <&gpio4 23 0x4>;
  46. };
  47. button@3 {
  48. debounce_interval = <50>;
  49. wakeup = <1>;
  50. linux,code = <4>;
  51. label = "extkb2";
  52. gpios = <&gpio4 24 0x4>;
  53. };
  54. button@4 {
  55. debounce_interval = <50>;
  56. wakeup = <1>;
  57. linux,code = <5>;
  58. label = "extkb3";
  59. gpios = <&gpio5 1 0x4>;
  60. };
  61. button@5 {
  62. debounce_interval = <50>;
  63. wakeup = <1>;
  64. linux,code = <6>;
  65. label = "extkb4";
  66. gpios = <&gpio5 2 0x4>;
  67. };
  68. };
  69. leds {
  70. compatible = "gpio-leds";
  71. used-led {
  72. label = "user_led";
  73. gpios = <&gpio4 14 0x4>;
  74. default-state = "on";
  75. linux,default-trigger = "heartbeat";
  76. };
  77. };
  78. soc {
  79. sound {
  80. compatible = "stericsson,snd-soc-mop500";
  81. stericsson,cpu-dai = <&msp1 &msp3>;
  82. stericsson,audio-codec = <&codec>;
  83. };
  84. msp1: msp@80124000 {
  85. status = "okay";
  86. };
  87. msp3: msp@80125000 {
  88. status = "okay";
  89. };
  90. external-bus@50000000 {
  91. status = "okay";
  92. ethernet@0 {
  93. compatible = "smsc,lan9115";
  94. reg = <0 0x10000>;
  95. interrupts = <12 IRQ_TYPE_EDGE_RISING>;
  96. interrupt-parent = <&gpio4>;
  97. vdd33a-supply = <&en_3v3_reg>;
  98. vddvario-supply = <&db8500_vape_reg>;
  99. reg-shift = <1>;
  100. reg-io-width = <2>;
  101. smsc,force-internal-phy;
  102. smsc,irq-active-high;
  103. smsc,irq-push-pull;
  104. clocks = <&prcc_pclk 3 0>;
  105. };
  106. };
  107. vmmci: regulator-gpio {
  108. gpios = <&gpio6 25 0x4>;
  109. enable-gpio = <&gpio7 4 0x4>;
  110. status = "okay";
  111. };
  112. // External Micro SD slot
  113. sdi0_per1@80126000 {
  114. arm,primecell-periphid = <0x10480180>;
  115. max-frequency = <100000000>;
  116. bus-width = <4>;
  117. mmc-cap-mmc-highspeed;
  118. vmmc-supply = <&ab8500_ldo_aux3_reg>;
  119. vqmmc-supply = <&vmmci>;
  120. cd-gpios = <&gpio6 26 0x4>; // 218
  121. cd-inverted;
  122. status = "okay";
  123. };
  124. // On-board eMMC
  125. sdi4_per2@80114000 {
  126. arm,primecell-periphid = <0x10480180>;
  127. max-frequency = <100000000>;
  128. bus-width = <8>;
  129. mmc-cap-mmc-highspeed;
  130. vmmc-supply = <&ab8500_ldo_aux2_reg>;
  131. status = "okay";
  132. };
  133. uart@80120000 {
  134. status = "okay";
  135. };
  136. uart@80121000 {
  137. status = "okay";
  138. };
  139. uart@80007000 {
  140. status = "okay";
  141. };
  142. cpufreq-cooling {
  143. status = "okay";
  144. };
  145. prcmu@80157000 {
  146. cpufreq {
  147. status = "okay";
  148. };
  149. thermal@801573c0 {
  150. num-trips = <4>;
  151. trip0-temp = <70000>;
  152. trip0-type = "active";
  153. trip0-cdev-num = <1>;
  154. trip0-cdev-name0 = "thermal-cpufreq-0";
  155. trip1-temp = <75000>;
  156. trip1-type = "active";
  157. trip1-cdev-num = <1>;
  158. trip1-cdev-name0 = "thermal-cpufreq-0";
  159. trip2-temp = <80000>;
  160. trip2-type = "active";
  161. trip2-cdev-num = <1>;
  162. trip2-cdev-name0 = "thermal-cpufreq-0";
  163. trip3-temp = <85000>;
  164. trip3-type = "critical";
  165. trip3-cdev-num = <0>;
  166. status = "okay";
  167. };
  168. ab8500 {
  169. ab8500-gpio {
  170. compatible = "stericsson,ab8500-gpio";
  171. };
  172. ext_regulators: ab8500-ext-regulators {
  173. ab8500_ext1_reg: ab8500_ext1 {
  174. regulator-name = "ab8500-ext-supply1";
  175. };
  176. ab8500_ext2_reg_reg: ab8500_ext2 {
  177. regulator-name = "ab8500-ext-supply2";
  178. };
  179. ab8500_ext3_reg_reg: ab8500_ext3 {
  180. regulator-name = "ab8500-ext-supply3";
  181. };
  182. };
  183. ab8500-regulators {
  184. ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
  185. regulator-name = "V-DISPLAY";
  186. };
  187. ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
  188. regulator-name = "V-eMMC1";
  189. };
  190. ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
  191. regulator-name = "V-MMC-SD";
  192. };
  193. ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
  194. regulator-name = "V-INTCORE";
  195. };
  196. ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
  197. regulator-name = "V-TVOUT";
  198. };
  199. ab8500_ldo_usb_reg: ab8500_ldo_usb {
  200. regulator-name = "dummy";
  201. };
  202. ab8500_ldo_audio_reg: ab8500_ldo_audio {
  203. regulator-name = "V-AUD";
  204. };
  205. ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
  206. regulator-name = "V-AMIC1";
  207. };
  208. ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
  209. regulator-name = "V-AMIC2";
  210. };
  211. ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
  212. regulator-name = "V-DMIC";
  213. };
  214. ab8500_ldo_ana_reg: ab8500_ldo_ana {
  215. regulator-name = "V-CSI/DSI";
  216. };
  217. };
  218. };
  219. };
  220. };
  221. };