pci.c 8.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339
  1. /*
  2. * Copyright (c) 2008-2009 Atheros Communications Inc.
  3. *
  4. * Permission to use, copy, modify, and/or distribute this software for any
  5. * purpose with or without fee is hereby granted, provided that the above
  6. * copyright notice and this permission notice appear in all copies.
  7. *
  8. * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  9. * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10. * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  11. * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12. * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  13. * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  14. * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15. */
  16. #include <linux/nl80211.h>
  17. #include <linux/pci.h>
  18. #include <linux/ath9k_platform.h>
  19. #include "ath9k.h"
  20. static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
  21. { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */
  22. { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
  23. { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
  24. { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
  25. { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
  26. { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
  27. { PCI_VDEVICE(ATHEROS, 0x002C) }, /* PCI-E 802.11n bonded out */
  28. { PCI_VDEVICE(ATHEROS, 0x002D) }, /* PCI */
  29. { PCI_VDEVICE(ATHEROS, 0x002E) }, /* PCI-E */
  30. { PCI_VDEVICE(ATHEROS, 0x0030) }, /* PCI-E AR9300 */
  31. { 0 }
  32. };
  33. /* return bus cachesize in 4B word units */
  34. static void ath_pci_read_cachesize(struct ath_common *common, int *csz)
  35. {
  36. struct ath_softc *sc = (struct ath_softc *) common->priv;
  37. u8 u8tmp;
  38. pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE, &u8tmp);
  39. *csz = (int)u8tmp;
  40. /*
  41. * This check was put in to avoid "unplesant" consequences if
  42. * the bootrom has not fully initialized all PCI devices.
  43. * Sometimes the cache line size register is not set
  44. */
  45. if (*csz == 0)
  46. *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */
  47. }
  48. static bool ath_pci_eeprom_read(struct ath_common *common, u32 off, u16 *data)
  49. {
  50. struct ath_softc *sc = (struct ath_softc *) common->priv;
  51. struct ath9k_platform_data *pdata = sc->dev->platform_data;
  52. if (pdata) {
  53. if (off >= (ARRAY_SIZE(pdata->eeprom_data))) {
  54. ath_print(common, ATH_DBG_FATAL,
  55. "%s: eeprom read failed, offset %08x "
  56. "is out of range\n",
  57. __func__, off);
  58. }
  59. *data = pdata->eeprom_data[off];
  60. } else {
  61. struct ath_hw *ah = (struct ath_hw *) common->ah;
  62. common->ops->read(ah, AR5416_EEPROM_OFFSET +
  63. (off << AR5416_EEPROM_S));
  64. if (!ath9k_hw_wait(ah,
  65. AR_EEPROM_STATUS_DATA,
  66. AR_EEPROM_STATUS_DATA_BUSY |
  67. AR_EEPROM_STATUS_DATA_PROT_ACCESS, 0,
  68. AH_WAIT_TIMEOUT)) {
  69. return false;
  70. }
  71. *data = MS(common->ops->read(ah, AR_EEPROM_STATUS_DATA),
  72. AR_EEPROM_STATUS_DATA_VAL);
  73. }
  74. return true;
  75. }
  76. /*
  77. * Bluetooth coexistance requires disabling ASPM.
  78. */
  79. static void ath_pci_bt_coex_prep(struct ath_common *common)
  80. {
  81. struct ath_softc *sc = (struct ath_softc *) common->priv;
  82. struct pci_dev *pdev = to_pci_dev(sc->dev);
  83. u8 aspm;
  84. if (!pdev->is_pcie)
  85. return;
  86. pci_read_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, &aspm);
  87. aspm &= ~(ATH_PCIE_CAP_LINK_L0S | ATH_PCIE_CAP_LINK_L1);
  88. pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
  89. }
  90. static const struct ath_bus_ops ath_pci_bus_ops = {
  91. .ath_bus_type = ATH_PCI,
  92. .read_cachesize = ath_pci_read_cachesize,
  93. .eeprom_read = ath_pci_eeprom_read,
  94. .bt_coex_prep = ath_pci_bt_coex_prep,
  95. };
  96. static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
  97. {
  98. void __iomem *mem;
  99. struct ath_wiphy *aphy;
  100. struct ath_softc *sc;
  101. struct ieee80211_hw *hw;
  102. u8 csz;
  103. u16 subsysid;
  104. u32 val;
  105. int ret = 0;
  106. char hw_name[64];
  107. if (pci_enable_device(pdev))
  108. return -EIO;
  109. ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
  110. if (ret) {
  111. printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
  112. goto err_dma;
  113. }
  114. ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
  115. if (ret) {
  116. printk(KERN_ERR "ath9k: 32-bit DMA consistent "
  117. "DMA enable failed\n");
  118. goto err_dma;
  119. }
  120. /*
  121. * Cache line size is used to size and align various
  122. * structures used to communicate with the hardware.
  123. */
  124. pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
  125. if (csz == 0) {
  126. /*
  127. * Linux 2.4.18 (at least) writes the cache line size
  128. * register as a 16-bit wide register which is wrong.
  129. * We must have this setup properly for rx buffer
  130. * DMA to work so force a reasonable value here if it
  131. * comes up zero.
  132. */
  133. csz = L1_CACHE_BYTES / sizeof(u32);
  134. pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
  135. }
  136. /*
  137. * The default setting of latency timer yields poor results,
  138. * set it to the value used by other systems. It may be worth
  139. * tweaking this setting more.
  140. */
  141. pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
  142. pci_set_master(pdev);
  143. /*
  144. * Disable the RETRY_TIMEOUT register (0x41) to keep
  145. * PCI Tx retries from interfering with C3 CPU state.
  146. */
  147. pci_read_config_dword(pdev, 0x40, &val);
  148. if ((val & 0x0000ff00) != 0)
  149. pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
  150. ret = pci_request_region(pdev, 0, "ath9k");
  151. if (ret) {
  152. dev_err(&pdev->dev, "PCI memory region reserve error\n");
  153. ret = -ENODEV;
  154. goto err_region;
  155. }
  156. mem = pci_iomap(pdev, 0, 0);
  157. if (!mem) {
  158. printk(KERN_ERR "PCI memory map error\n") ;
  159. ret = -EIO;
  160. goto err_iomap;
  161. }
  162. hw = ieee80211_alloc_hw(sizeof(struct ath_wiphy) +
  163. sizeof(struct ath_softc), &ath9k_ops);
  164. if (!hw) {
  165. dev_err(&pdev->dev, "No memory for ieee80211_hw\n");
  166. ret = -ENOMEM;
  167. goto err_alloc_hw;
  168. }
  169. SET_IEEE80211_DEV(hw, &pdev->dev);
  170. pci_set_drvdata(pdev, hw);
  171. aphy = hw->priv;
  172. sc = (struct ath_softc *) (aphy + 1);
  173. aphy->sc = sc;
  174. aphy->hw = hw;
  175. sc->pri_wiphy = aphy;
  176. sc->hw = hw;
  177. sc->dev = &pdev->dev;
  178. sc->mem = mem;
  179. /* Will be cleared in ath9k_start() */
  180. sc->sc_flags |= SC_OP_INVALID;
  181. ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc);
  182. if (ret) {
  183. dev_err(&pdev->dev, "request_irq failed\n");
  184. goto err_irq;
  185. }
  186. sc->irq = pdev->irq;
  187. pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid);
  188. ret = ath9k_init_device(id->device, sc, subsysid, &ath_pci_bus_ops);
  189. if (ret) {
  190. dev_err(&pdev->dev, "Failed to initialize device\n");
  191. goto err_init;
  192. }
  193. ath9k_hw_name(sc->sc_ah, hw_name, sizeof(hw_name));
  194. wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n",
  195. hw_name, (unsigned long)mem, pdev->irq);
  196. return 0;
  197. err_init:
  198. free_irq(sc->irq, sc);
  199. err_irq:
  200. ieee80211_free_hw(hw);
  201. err_alloc_hw:
  202. pci_iounmap(pdev, mem);
  203. err_iomap:
  204. pci_release_region(pdev, 0);
  205. err_region:
  206. /* Nothing */
  207. err_dma:
  208. pci_disable_device(pdev);
  209. return ret;
  210. }
  211. static void ath_pci_remove(struct pci_dev *pdev)
  212. {
  213. struct ieee80211_hw *hw = pci_get_drvdata(pdev);
  214. struct ath_wiphy *aphy = hw->priv;
  215. struct ath_softc *sc = aphy->sc;
  216. void __iomem *mem = sc->mem;
  217. ath9k_deinit_device(sc);
  218. free_irq(sc->irq, sc);
  219. ieee80211_free_hw(sc->hw);
  220. pci_iounmap(pdev, mem);
  221. pci_disable_device(pdev);
  222. pci_release_region(pdev, 0);
  223. }
  224. #ifdef CONFIG_PM
  225. static int ath_pci_suspend(struct device *device)
  226. {
  227. struct pci_dev *pdev = to_pci_dev(device);
  228. struct ieee80211_hw *hw = pci_get_drvdata(pdev);
  229. struct ath_wiphy *aphy = hw->priv;
  230. struct ath_softc *sc = aphy->sc;
  231. ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
  232. return 0;
  233. }
  234. static int ath_pci_resume(struct device *device)
  235. {
  236. struct pci_dev *pdev = to_pci_dev(device);
  237. struct ieee80211_hw *hw = pci_get_drvdata(pdev);
  238. struct ath_wiphy *aphy = hw->priv;
  239. struct ath_softc *sc = aphy->sc;
  240. u32 val;
  241. /*
  242. * Suspend/Resume resets the PCI configuration space, so we have to
  243. * re-disable the RETRY_TIMEOUT register (0x41) to keep
  244. * PCI Tx retries from interfering with C3 CPU state
  245. */
  246. pci_read_config_dword(pdev, 0x40, &val);
  247. if ((val & 0x0000ff00) != 0)
  248. pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
  249. /* Enable LED */
  250. ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
  251. AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
  252. ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
  253. return 0;
  254. }
  255. static const struct dev_pm_ops ath9k_pm_ops = {
  256. .suspend = ath_pci_suspend,
  257. .resume = ath_pci_resume,
  258. .freeze = ath_pci_suspend,
  259. .thaw = ath_pci_resume,
  260. .poweroff = ath_pci_suspend,
  261. .restore = ath_pci_resume,
  262. };
  263. #define ATH9K_PM_OPS (&ath9k_pm_ops)
  264. #else /* !CONFIG_PM */
  265. #define ATH9K_PM_OPS NULL
  266. #endif /* !CONFIG_PM */
  267. MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
  268. static struct pci_driver ath_pci_driver = {
  269. .name = "ath9k",
  270. .id_table = ath_pci_id_table,
  271. .probe = ath_pci_probe,
  272. .remove = ath_pci_remove,
  273. .driver.pm = ATH9K_PM_OPS,
  274. };
  275. int ath_pci_init(void)
  276. {
  277. return pci_register_driver(&ath_pci_driver);
  278. }
  279. void ath_pci_exit(void)
  280. {
  281. pci_unregister_driver(&ath_pci_driver);
  282. }