time_32.c 4.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134
  1. /*
  2. * Copyright (C) 1991, 1992, 1995 Linus Torvalds
  3. *
  4. * This file contains the PC-specific time handling details:
  5. * reading the RTC at bootup, etc..
  6. * 1994-07-02 Alan Modra
  7. * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
  8. * 1995-03-26 Markus Kuhn
  9. * fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
  10. * precision CMOS clock update
  11. * 1996-05-03 Ingo Molnar
  12. * fixed time warps in do_[slow|fast]_gettimeoffset()
  13. * 1997-09-10 Updated NTP code according to technical memorandum Jan '96
  14. * "A Kernel Model for Precision Timekeeping" by Dave Mills
  15. * 1998-09-05 (Various)
  16. * More robust do_fast_gettimeoffset() algorithm implemented
  17. * (works with APM, Cyrix 6x86MX and Centaur C6),
  18. * monotonic gettimeofday() with fast_get_timeoffset(),
  19. * drift-proof precision TSC calibration on boot
  20. * (C. Scott Ananian <cananian@alumni.princeton.edu>, Andrew D.
  21. * Balsa <andrebalsa@altern.org>, Philip Gladstone <philip@raptor.com>;
  22. * ported from 2.0.35 Jumbo-9 by Michael Krause <m.krause@tu-harburg.de>).
  23. * 1998-12-16 Andrea Arcangeli
  24. * Fixed Jumbo-9 code in 2.1.131: do_gettimeofday was missing 1 jiffy
  25. * because was not accounting lost_ticks.
  26. * 1998-12-24 Copyright (C) 1998 Andrea Arcangeli
  27. * Fixed a xtime SMP race (we need the xtime_lock rw spinlock to
  28. * serialize accesses to xtime/lost_ticks).
  29. */
  30. #include <linux/init.h>
  31. #include <linux/interrupt.h>
  32. #include <linux/time.h>
  33. #include <linux/mca.h>
  34. #include <asm/arch_hooks.h>
  35. #include <asm/hpet.h>
  36. #include <asm/time.h>
  37. #include "do_timer.h"
  38. int timer_ack;
  39. unsigned long profile_pc(struct pt_regs *regs)
  40. {
  41. unsigned long pc = instruction_pointer(regs);
  42. #ifdef CONFIG_SMP
  43. if (!v8086_mode(regs) && SEGMENT_IS_KERNEL_CODE(regs->cs) &&
  44. in_lock_functions(pc)) {
  45. #ifdef CONFIG_FRAME_POINTER
  46. return *(unsigned long *)(regs->bp + 4);
  47. #else
  48. unsigned long *sp = (unsigned long *)&regs->sp;
  49. /* Return address is either directly at stack pointer
  50. or above a saved flags. Eflags has bits 22-31 zero,
  51. kernel addresses don't. */
  52. if (sp[0] >> 22)
  53. return sp[0];
  54. if (sp[1] >> 22)
  55. return sp[1];
  56. #endif
  57. }
  58. #endif
  59. return pc;
  60. }
  61. EXPORT_SYMBOL(profile_pc);
  62. /*
  63. * This is the same as the above, except we _also_ save the current
  64. * Time Stamp Counter value at the time of the timer interrupt, so that
  65. * we later on can estimate the time of day more exactly.
  66. */
  67. irqreturn_t timer_interrupt(int irq, void *dev_id)
  68. {
  69. /* Keep nmi watchdog up to date */
  70. per_cpu(irq_stat, smp_processor_id()).irq0_irqs++;
  71. #ifdef CONFIG_X86_IO_APIC
  72. if (timer_ack) {
  73. /*
  74. * Subtle, when I/O APICs are used we have to ack timer IRQ
  75. * manually to deassert NMI lines for the watchdog if run
  76. * on an 82489DX-based system.
  77. */
  78. spin_lock(&i8259A_lock);
  79. outb(0x0c, PIC_MASTER_OCW3);
  80. /* Ack the IRQ; AEOI will end it automatically. */
  81. inb(PIC_MASTER_POLL);
  82. spin_unlock(&i8259A_lock);
  83. }
  84. #endif
  85. do_timer_interrupt_hook();
  86. if (MCA_bus) {
  87. /* The PS/2 uses level-triggered interrupts. You can't
  88. turn them off, nor would you want to (any attempt to
  89. enable edge-triggered interrupts usually gets intercepted by a
  90. special hardware circuit). Hence we have to acknowledge
  91. the timer interrupt. Through some incredibly stupid
  92. design idea, the reset for IRQ 0 is done by setting the
  93. high bit of the PPI port B (0x61). Note that some PS/2s,
  94. notably the 55SX, work fine if this is removed. */
  95. u8 irq_v = inb_p( 0x61 ); /* read the current state */
  96. outb_p( irq_v|0x80, 0x61 ); /* reset the IRQ */
  97. }
  98. return IRQ_HANDLED;
  99. }
  100. /* Duplicate of time_init() below, with hpet_enable part added */
  101. void __init hpet_time_init(void)
  102. {
  103. if (!hpet_enable())
  104. setup_pit_timer();
  105. time_init_hook();
  106. }
  107. /*
  108. * This is called directly from init code; we must delay timer setup in the
  109. * HPET case as we can't make the decision to turn on HPET this early in the
  110. * boot process.
  111. *
  112. * The chosen time_init function will usually be hpet_time_init, above, but
  113. * in the case of virtual hardware, an alternative function may be substituted.
  114. */
  115. void __init time_init(void)
  116. {
  117. tsc_init();
  118. late_time_init = choose_time_init();
  119. }