actbl2.h 13 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277
  1. /******************************************************************************
  2. *
  3. * Name: actbl2.h - ACPI Specification Revision 2.0 Tables
  4. *
  5. *****************************************************************************/
  6. /*
  7. * Copyright (C) 2000 - 2006, R. Byron Moore
  8. * All rights reserved.
  9. *
  10. * Redistribution and use in source and binary forms, with or without
  11. * modification, are permitted provided that the following conditions
  12. * are met:
  13. * 1. Redistributions of source code must retain the above copyright
  14. * notice, this list of conditions, and the following disclaimer,
  15. * without modification.
  16. * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  17. * substantially similar to the "NO WARRANTY" disclaimer below
  18. * ("Disclaimer") and any redistribution must be conditioned upon
  19. * including a substantially similar Disclaimer requirement for further
  20. * binary redistribution.
  21. * 3. Neither the names of the above-listed copyright holders nor the names
  22. * of any contributors may be used to endorse or promote products derived
  23. * from this software without specific prior written permission.
  24. *
  25. * Alternatively, this software may be distributed under the terms of the
  26. * GNU General Public License ("GPL") version 2 as published by the Free
  27. * Software Foundation.
  28. *
  29. * NO WARRANTY
  30. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  31. * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  32. * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  33. * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  34. * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  35. * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  36. * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  37. * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  38. * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  39. * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  40. * POSSIBILITY OF SUCH DAMAGES.
  41. */
  42. #ifndef __ACTBL2_H__
  43. #define __ACTBL2_H__
  44. /*
  45. * Prefered Power Management Profiles
  46. */
  47. #define PM_UNSPECIFIED 0
  48. #define PM_DESKTOP 1
  49. #define PM_MOBILE 2
  50. #define PM_WORKSTATION 3
  51. #define PM_ENTERPRISE_SERVER 4
  52. #define PM_SOHO_SERVER 5
  53. #define PM_APPLIANCE_PC 6
  54. /*
  55. * ACPI Boot Arch Flags
  56. */
  57. #define BAF_LEGACY_DEVICES 0x0001
  58. #define BAF_8042_KEYBOARD_CONTROLLER 0x0002
  59. #define FADT2_REVISION_ID 3
  60. #define FADT2_MINUS_REVISION_ID 2
  61. #pragma pack(1)
  62. /*
  63. * ACPI 2.0 Root System Description Table (RSDT)
  64. */
  65. struct rsdt_descriptor_rev2 {
  66. ACPI_TABLE_HEADER_DEF /* ACPI common table header */
  67. u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */
  68. };
  69. /*
  70. * ACPI 2.0 Extended System Description Table (XSDT)
  71. */
  72. struct xsdt_descriptor_rev2 {
  73. ACPI_TABLE_HEADER_DEF /* ACPI common table header */
  74. u64 table_offset_entry[1]; /* Array of pointers to ACPI tables */
  75. };
  76. /*
  77. * ACPI 2.0 Firmware ACPI Control Structure (FACS)
  78. */
  79. struct facs_descriptor_rev2 {
  80. char signature[4]; /* ASCII table signature */
  81. u32 length; /* Length of structure, in bytes */
  82. u32 hardware_signature; /* Hardware configuration signature */
  83. u32 firmware_waking_vector; /* 32-bit physical address of the Firmware Waking Vector. */
  84. u32 global_lock; /* Global Lock used to synchronize access to shared hardware resources */
  85. /* Flags (32 bits) */
  86. u8 S4bios_f:1; /* 00: S4BIOS support is present */
  87. u8:7; /* 01-07: Reserved, must be zero */
  88. u8 reserved1[3]; /* 08-31: Reserved, must be zero */
  89. u64 xfirmware_waking_vector; /* 64-bit physical address of the Firmware Waking Vector. */
  90. u8 version; /* Version of this table */
  91. u8 reserved3[31]; /* Reserved, must be zero */
  92. };
  93. /*
  94. * ACPI 2.0+ Generic Address Structure (GAS)
  95. */
  96. struct acpi_generic_address {
  97. u8 address_space_id; /* Address space where struct or register exists. */
  98. u8 register_bit_width; /* Size in bits of given register */
  99. u8 register_bit_offset; /* Bit offset within the register */
  100. u8 access_width; /* Minimum Access size (ACPI 3.0) */
  101. u64 address; /* 64-bit address of struct or register */
  102. };
  103. #define FADT_REV2_COMMON \
  104. u32 V1_firmware_ctrl; /* 32-bit physical address of FACS */ \
  105. u32 V1_dsdt; /* 32-bit physical address of DSDT */ \
  106. u8 reserved1; /* System Interrupt Model isn't used in ACPI 2.0*/ \
  107. u8 prefer_PM_profile; /* Conveys preferred power management profile to OSPM. */ \
  108. u16 sci_int; /* System vector of SCI interrupt */ \
  109. u32 smi_cmd; /* Port address of SMI command port */ \
  110. u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */ \
  111. u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */ \
  112. u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */ \
  113. u8 pstate_cnt; /* Processor performance state control*/ \
  114. u32 V1_pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */ \
  115. u32 V1_pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */ \
  116. u32 V1_pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */ \
  117. u32 V1_pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */ \
  118. u32 V1_pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */ \
  119. u32 V1_pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */ \
  120. u32 V1_gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */ \
  121. u32 V1_gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */ \
  122. u8 pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */ \
  123. u8 pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */ \
  124. u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */ \
  125. u8 pm_tm_len; /* Byte Length of ports at pm_tm_blk */ \
  126. u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */ \
  127. u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */ \
  128. u8 gpe1_base; /* Offset in gpe model where gpe1 events start */ \
  129. u8 cst_cnt; /* Support for the _CST object and C States change notification.*/ \
  130. u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */ \
  131. u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */ \
  132. u16 flush_size; /* Number of flush strides that need to be read */ \
  133. u16 flush_stride; /* Processor's memory cache line width, in bytes */ \
  134. u8 duty_offset; /* Processor's duty cycle index in processor's P_CNT reg*/ \
  135. u8 duty_width; /* Processor's duty cycle value bit width in P_CNT register.*/ \
  136. u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */ \
  137. u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */ \
  138. u8 century; /* Index to century in RTC CMOS RAM */ \
  139. u16 iapc_boot_arch; /* IA-PC Boot Architecture Flags. See Table 5-10 for description*/
  140. /*
  141. * ACPI 2.0+ Fixed ACPI Description Table (FADT)
  142. */
  143. struct fadt_descriptor_rev2 {
  144. ACPI_TABLE_HEADER_DEF /* ACPI common table header */
  145. FADT_REV2_COMMON u8 reserved2; /* Reserved, must be zero */
  146. /* Flags (32 bits) */
  147. u8 wb_invd:1; /* 00: The wbinvd instruction works properly */
  148. u8 wb_invd_flush:1; /* 01: The wbinvd flushes but does not invalidate */
  149. u8 proc_c1:1; /* 02: All processors support C1 state */
  150. u8 plvl2_up:1; /* 03: C2 state works on MP system */
  151. u8 pwr_button:1; /* 04: Power button is handled as a generic feature */
  152. u8 sleep_button:1; /* 05: Sleep button is handled as a generic feature, or not present */
  153. u8 fixed_rTC:1; /* 06: RTC wakeup stat not in fixed register space */
  154. u8 rtcs4:1; /* 07: RTC wakeup stat not possible from S4 */
  155. u8 tmr_val_ext:1; /* 08: tmr_val is 32 bits 0=24-bits */
  156. u8 dock_cap:1; /* 09: Docking supported */
  157. u8 reset_reg_sup:1; /* 10: System reset via the FADT RESET_REG supported */
  158. u8 sealed_case:1; /* 11: No internal expansion capabilities and case is sealed */
  159. u8 headless:1; /* 12: No local video capabilities or local input devices */
  160. u8 cpu_sw_sleep:1; /* 13: Must execute native instruction after writing SLP_TYPx register */
  161. u8 pci_exp_wak:1; /* 14: System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
  162. u8 use_platform_clock:1; /* 15: OSPM should use platform-provided timer (ACPI 3.0) */
  163. u8 S4rtc_sts_valid:1; /* 16: Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
  164. u8 remote_power_on_capable:1; /* 17: System is compatible with remote power on (ACPI 3.0) */
  165. u8 force_apic_cluster_model:1; /* 18: All local APICs must use cluster model (ACPI 3.0) */
  166. u8 force_apic_physical_destination_mode:1; /* 19: all local x_aPICs must use physical dest mode (ACPI 3.0) */
  167. u8:4; /* 20-23: Reserved, must be zero */
  168. u8 reserved3; /* 24-31: Reserved, must be zero */
  169. struct acpi_generic_address reset_register; /* Reset register address in GAS format */
  170. u8 reset_value; /* Value to write to the reset_register port to reset the system */
  171. u8 reserved4[3]; /* These three bytes must be zero */
  172. u64 xfirmware_ctrl; /* 64-bit physical address of FACS */
  173. u64 Xdsdt; /* 64-bit physical address of DSDT */
  174. struct acpi_generic_address xpm1a_evt_blk; /* Extended Power Mgt 1a acpi_event Reg Blk address */
  175. struct acpi_generic_address xpm1b_evt_blk; /* Extended Power Mgt 1b acpi_event Reg Blk address */
  176. struct acpi_generic_address xpm1a_cnt_blk; /* Extended Power Mgt 1a Control Reg Blk address */
  177. struct acpi_generic_address xpm1b_cnt_blk; /* Extended Power Mgt 1b Control Reg Blk address */
  178. struct acpi_generic_address xpm2_cnt_blk; /* Extended Power Mgt 2 Control Reg Blk address */
  179. struct acpi_generic_address xpm_tmr_blk; /* Extended Power Mgt Timer Ctrl Reg Blk address */
  180. struct acpi_generic_address xgpe0_blk; /* Extended General Purpose acpi_event 0 Reg Blk address */
  181. struct acpi_generic_address xgpe1_blk; /* Extended General Purpose acpi_event 1 Reg Blk address */
  182. };
  183. /* "Down-revved" ACPI 2.0 FADT descriptor */
  184. struct fadt_descriptor_rev2_minus {
  185. ACPI_TABLE_HEADER_DEF /* ACPI common table header */
  186. FADT_REV2_COMMON u8 reserved2; /* Reserved, must be zero */
  187. u32 flags;
  188. struct acpi_generic_address reset_register; /* Reset register address in GAS format */
  189. u8 reset_value; /* Value to write to the reset_register port to reset the system. */
  190. u8 reserved7[3]; /* Reserved, must be zero */
  191. };
  192. /* ECDT - Embedded Controller Boot Resources Table */
  193. struct ec_boot_resources {
  194. ACPI_TABLE_HEADER_DEF struct acpi_generic_address ec_control; /* Address of EC command/status register */
  195. struct acpi_generic_address ec_data; /* Address of EC data register */
  196. u32 uid; /* Unique ID - must be same as the EC _UID method */
  197. u8 gpe_bit; /* The GPE for the EC */
  198. u8 ec_id[1]; /* Full namepath of the EC in the ACPI namespace */
  199. };
  200. /* SRAT - System Resource Affinity Table */
  201. struct static_resource_alloc {
  202. u8 type;
  203. u8 length;
  204. u8 proximity_domain_lo;
  205. u8 apic_id;
  206. /* Flags (32 bits) */
  207. u8 enabled:1; /* 00: Use affinity structure */
  208. u8:7; /* 01-07: Reserved, must be zero */
  209. u8 reserved3[3]; /* 08-31: Reserved, must be zero */
  210. u8 local_sapic_eid;
  211. u8 proximity_domain_hi[3];
  212. u32 reserved4; /* Reserved, must be zero */
  213. };
  214. struct memory_affinity {
  215. u8 type;
  216. u8 length;
  217. u32 proximity_domain;
  218. u16 reserved3;
  219. u64 base_address;
  220. u64 address_length;
  221. u32 reserved4;
  222. /* Flags (32 bits) */
  223. u8 enabled:1; /* 00: Use affinity structure */
  224. u8 hot_pluggable:1; /* 01: Memory region is hot pluggable */
  225. u8 non_volatile:1; /* 02: Memory is non-volatile */
  226. u8:5; /* 03-07: Reserved, must be zero */
  227. u8 reserved5[3]; /* 08-31: Reserved, must be zero */
  228. u64 reserved6; /* Reserved, must be zero */
  229. };
  230. struct system_resource_affinity {
  231. ACPI_TABLE_HEADER_DEF u32 reserved1; /* Must be value '1' */
  232. u64 reserved2; /* Reserved, must be zero */
  233. };
  234. /* SLIT - System Locality Distance Information Table */
  235. struct system_locality_info {
  236. ACPI_TABLE_HEADER_DEF u64 locality_count;
  237. u8 entry[1][1];
  238. };
  239. #pragma pack()
  240. #endif /* __ACTBL2_H__ */