Makefile 39 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263
  1. ifeq ("$(origin O)", "command line")
  2. OUTPUT := $(O)/
  3. endif
  4. # The default target of this Makefile is...
  5. all::
  6. # Define V=1 to have a more verbose compile.
  7. # Define V=2 to have an even more verbose compile.
  8. #
  9. # Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf()
  10. # or vsnprintf() return -1 instead of number of characters which would
  11. # have been written to the final string if enough space had been available.
  12. #
  13. # Define FREAD_READS_DIRECTORIES if your are on a system which succeeds
  14. # when attempting to read from an fopen'ed directory.
  15. #
  16. # Define NO_OPENSSL environment variable if you do not have OpenSSL.
  17. # This also implies MOZILLA_SHA1.
  18. #
  19. # Define CURLDIR=/foo/bar if your curl header and library files are in
  20. # /foo/bar/include and /foo/bar/lib directories.
  21. #
  22. # Define EXPATDIR=/foo/bar if your expat header and library files are in
  23. # /foo/bar/include and /foo/bar/lib directories.
  24. #
  25. # Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent.
  26. #
  27. # Define NO_D_TYPE_IN_DIRENT if your platform defines DT_UNKNOWN but lacks
  28. # d_type in struct dirent (latest Cygwin -- will be fixed soonish).
  29. #
  30. # Define NO_C99_FORMAT if your formatted IO functions (printf/scanf et.al.)
  31. # do not support the 'size specifiers' introduced by C99, namely ll, hh,
  32. # j, z, t. (representing long long int, char, intmax_t, size_t, ptrdiff_t).
  33. # some C compilers supported these specifiers prior to C99 as an extension.
  34. #
  35. # Define NO_STRCASESTR if you don't have strcasestr.
  36. #
  37. # Define NO_MEMMEM if you don't have memmem.
  38. #
  39. # Define NO_STRTOUMAX if you don't have strtoumax in the C library.
  40. # If your compiler also does not support long long or does not have
  41. # strtoull, define NO_STRTOULL.
  42. #
  43. # Define NO_SETENV if you don't have setenv in the C library.
  44. #
  45. # Define NO_UNSETENV if you don't have unsetenv in the C library.
  46. #
  47. # Define NO_MKDTEMP if you don't have mkdtemp in the C library.
  48. #
  49. # Define NO_SYS_SELECT_H if you don't have sys/select.h.
  50. #
  51. # Define NO_SYMLINK_HEAD if you never want .perf/HEAD to be a symbolic link.
  52. # Enable it on Windows. By default, symrefs are still used.
  53. #
  54. # Define NO_SVN_TESTS if you want to skip time-consuming SVN interoperability
  55. # tests. These tests take up a significant amount of the total test time
  56. # but are not needed unless you plan to talk to SVN repos.
  57. #
  58. # Define NO_FINK if you are building on Darwin/Mac OS X, have Fink
  59. # installed in /sw, but don't want PERF to link against any libraries
  60. # installed there. If defined you may specify your own (or Fink's)
  61. # include directories and library directories by defining CFLAGS
  62. # and LDFLAGS appropriately.
  63. #
  64. # Define NO_DARWIN_PORTS if you are building on Darwin/Mac OS X,
  65. # have DarwinPorts installed in /opt/local, but don't want PERF to
  66. # link against any libraries installed there. If defined you may
  67. # specify your own (or DarwinPort's) include directories and
  68. # library directories by defining CFLAGS and LDFLAGS appropriately.
  69. #
  70. # Define PPC_SHA1 environment variable when running make to make use of
  71. # a bundled SHA1 routine optimized for PowerPC.
  72. #
  73. # Define ARM_SHA1 environment variable when running make to make use of
  74. # a bundled SHA1 routine optimized for ARM.
  75. #
  76. # Define MOZILLA_SHA1 environment variable when running make to make use of
  77. # a bundled SHA1 routine coming from Mozilla. It is GPL'd and should be fast
  78. # on non-x86 architectures (e.g. PowerPC), while the OpenSSL version (default
  79. # choice) has very fast version optimized for i586.
  80. #
  81. # Define NEEDS_SSL_WITH_CRYPTO if you need -lcrypto with -lssl (Darwin).
  82. #
  83. # Define NEEDS_LIBICONV if linking with libc is not enough (Darwin).
  84. #
  85. # Define NEEDS_SOCKET if linking with libc is not enough (SunOS,
  86. # Patrick Mauritz).
  87. #
  88. # Define NO_MMAP if you want to avoid mmap.
  89. #
  90. # Define NO_PTHREADS if you do not have or do not want to use Pthreads.
  91. #
  92. # Define NO_PREAD if you have a problem with pread() system call (e.g.
  93. # cygwin.dll before v1.5.22).
  94. #
  95. # Define NO_FAST_WORKING_DIRECTORY if accessing objects in pack files is
  96. # generally faster on your platform than accessing the working directory.
  97. #
  98. # Define NO_TRUSTABLE_FILEMODE if your filesystem may claim to support
  99. # the executable mode bit, but doesn't really do so.
  100. #
  101. # Define NO_IPV6 if you lack IPv6 support and getaddrinfo().
  102. #
  103. # Define NO_SOCKADDR_STORAGE if your platform does not have struct
  104. # sockaddr_storage.
  105. #
  106. # Define NO_ICONV if your libc does not properly support iconv.
  107. #
  108. # Define OLD_ICONV if your library has an old iconv(), where the second
  109. # (input buffer pointer) parameter is declared with type (const char **).
  110. #
  111. # Define NO_DEFLATE_BOUND if your zlib does not have deflateBound.
  112. #
  113. # Define NO_R_TO_GCC_LINKER if your gcc does not like "-R/path/lib"
  114. # that tells runtime paths to dynamic libraries;
  115. # "-Wl,-rpath=/path/lib" is used instead.
  116. #
  117. # Define USE_NSEC below if you want perf to care about sub-second file mtimes
  118. # and ctimes. Note that you need recent glibc (at least 2.2.4) for this, and
  119. # it will BREAK YOUR LOCAL DIFFS! show-diff and anything using it will likely
  120. # randomly break unless your underlying filesystem supports those sub-second
  121. # times (my ext3 doesn't).
  122. #
  123. # Define USE_ST_TIMESPEC if your "struct stat" uses "st_ctimespec" instead of
  124. # "st_ctim"
  125. #
  126. # Define NO_NSEC if your "struct stat" does not have "st_ctim.tv_nsec"
  127. # available. This automatically turns USE_NSEC off.
  128. #
  129. # Define USE_STDEV below if you want perf to care about the underlying device
  130. # change being considered an inode change from the update-index perspective.
  131. #
  132. # Define NO_ST_BLOCKS_IN_STRUCT_STAT if your platform does not have st_blocks
  133. # field that counts the on-disk footprint in 512-byte blocks.
  134. #
  135. # Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8
  136. #
  137. # Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72.
  138. #
  139. # Define NO_PERL_MAKEMAKER if you cannot use Makefiles generated by perl's
  140. # MakeMaker (e.g. using ActiveState under Cygwin).
  141. #
  142. # Define NO_PERL if you do not want Perl scripts or libraries at all.
  143. #
  144. # Define INTERNAL_QSORT to use Git's implementation of qsort(), which
  145. # is a simplified version of the merge sort used in glibc. This is
  146. # recommended if Git triggers O(n^2) behavior in your platform's qsort().
  147. #
  148. # Define NO_EXTERNAL_GREP if you don't want "perf grep" to ever call
  149. # your external grep (e.g., if your system lacks grep, if its grep is
  150. # broken, or spawning external process is slower than built-in grep perf has).
  151. #
  152. # Define LDFLAGS=-static to build a static binary.
  153. #
  154. # Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds.
  155. #
  156. # Define NO_DWARF if you do not want debug-info analysis feature at all.
  157. $(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
  158. @$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
  159. -include $(OUTPUT)PERF-VERSION-FILE
  160. uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo not')
  161. uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo not')
  162. uname_O := $(shell sh -c 'uname -o 2>/dev/null || echo not')
  163. uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
  164. uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
  165. uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
  166. ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
  167. -e s/arm.*/arm/ -e s/sa110/arm/ \
  168. -e s/s390x/s390/ -e s/parisc64/parisc/ \
  169. -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
  170. -e s/sh[234].*/sh/ )
  171. # Additional ARCH settings for x86
  172. ifeq ($(ARCH),i386)
  173. ARCH := x86
  174. endif
  175. ifeq ($(ARCH),x86_64)
  176. ARCH := x86
  177. endif
  178. # CFLAGS and LDFLAGS are for the users to override from the command line.
  179. #
  180. # Include saner warnings here, which can catch bugs:
  181. #
  182. EXTRA_WARNINGS := -Wformat
  183. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-security
  184. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-y2k
  185. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wshadow
  186. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Winit-self
  187. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wpacked
  188. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wredundant-decls
  189. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstack-protector
  190. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-aliasing=3
  191. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wswitch-default
  192. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wswitch-enum
  193. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wno-system-headers
  194. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wundef
  195. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wvolatile-register-var
  196. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wwrite-strings
  197. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wbad-function-cast
  198. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wmissing-declarations
  199. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wmissing-prototypes
  200. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wnested-externs
  201. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wold-style-definition
  202. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-prototypes
  203. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wdeclaration-after-statement
  204. ifeq ("$(origin DEBUG)", "command line")
  205. PERF_DEBUG = $(DEBUG)
  206. endif
  207. ifndef PERF_DEBUG
  208. CFLAGS_OPTIMIZE = -O6
  209. endif
  210. CFLAGS = -ggdb3 -Wall -Wextra -std=gnu99 -Werror $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
  211. EXTLIBS = -lpthread -lrt -lelf -lm
  212. ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
  213. ALL_LDFLAGS = $(LDFLAGS)
  214. STRIP ?= strip
  215. # Among the variables below, these:
  216. # perfexecdir
  217. # template_dir
  218. # mandir
  219. # infodir
  220. # htmldir
  221. # ETC_PERFCONFIG (but not sysconfdir)
  222. # can be specified as a relative path some/where/else;
  223. # this is interpreted as relative to $(prefix) and "perf" at
  224. # runtime figures out where they are based on the path to the executable.
  225. # This can help installing the suite in a relocatable way.
  226. # Make the path relative to DESTDIR, not to prefix
  227. ifndef DESTDIR
  228. prefix = $(HOME)
  229. endif
  230. bindir_relative = bin
  231. bindir = $(prefix)/$(bindir_relative)
  232. mandir = share/man
  233. infodir = share/info
  234. perfexecdir = libexec/perf-core
  235. sharedir = $(prefix)/share
  236. template_dir = share/perf-core/templates
  237. htmldir = share/doc/perf-doc
  238. ifeq ($(prefix),/usr)
  239. sysconfdir = /etc
  240. ETC_PERFCONFIG = $(sysconfdir)/perfconfig
  241. else
  242. sysconfdir = $(prefix)/etc
  243. ETC_PERFCONFIG = etc/perfconfig
  244. endif
  245. lib = lib
  246. export prefix bindir sharedir sysconfdir
  247. CC = $(CROSS_COMPILE)gcc
  248. AR = $(CROSS_COMPILE)ar
  249. RM = rm -f
  250. MKDIR = mkdir
  251. TAR = tar
  252. FIND = find
  253. INSTALL = install
  254. RPMBUILD = rpmbuild
  255. PTHREAD_LIBS = -lpthread
  256. # sparse is architecture-neutral, which means that we need to tell it
  257. # explicitly what architecture to check for. Fix this up for yours..
  258. SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
  259. ifeq ($(V), 2)
  260. QUIET_STDERR = ">/dev/null"
  261. else
  262. QUIET_STDERR = ">/dev/null 2>&1"
  263. endif
  264. -include feature-tests.mak
  265. ifeq ($(call try-cc,$(SOURCE_HELLO),-Werror -fstack-protector-all),y)
  266. CFLAGS := $(CFLAGS) -fstack-protector-all
  267. endif
  268. ### --- END CONFIGURATION SECTION ---
  269. # Those must not be GNU-specific; they are shared with perl/ which may
  270. # be built by a different compiler. (Note that this is an artifact now
  271. # but it still might be nice to keep that distinction.)
  272. BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include
  273. BASIC_LDFLAGS =
  274. # Guard against environment variables
  275. BUILTIN_OBJS =
  276. BUILT_INS =
  277. COMPAT_CFLAGS =
  278. COMPAT_OBJS =
  279. LIB_H =
  280. LIB_OBJS =
  281. SCRIPT_PERL =
  282. SCRIPT_SH =
  283. TEST_PROGRAMS =
  284. SCRIPT_SH += perf-archive.sh
  285. #
  286. # No Perl scripts right now:
  287. #
  288. # SCRIPT_PERL += perf-add--interactive.perl
  289. SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) \
  290. $(patsubst %.perl,%,$(SCRIPT_PERL))
  291. # Empty...
  292. EXTRA_PROGRAMS =
  293. # ... and all the rest that could be moved out of bindir to perfexecdir
  294. PROGRAMS += $(EXTRA_PROGRAMS)
  295. #
  296. # Single 'perf' binary right now:
  297. #
  298. PROGRAMS += $(OUTPUT)perf
  299. # List built-in command $C whose implementation cmd_$C() is not in
  300. # builtin-$C.o but is linked in as part of some other command.
  301. #
  302. # what 'all' will build and 'install' will install, in perfexecdir
  303. ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
  304. # what 'all' will build but not install in perfexecdir
  305. OTHER_PROGRAMS = $(OUTPUT)perf$X
  306. # Set paths to tools early so that they can be used for version tests.
  307. ifndef SHELL_PATH
  308. SHELL_PATH = /bin/sh
  309. endif
  310. ifndef PERL_PATH
  311. PERL_PATH = /usr/bin/perl
  312. endif
  313. export PERL_PATH
  314. LIB_FILE=$(OUTPUT)libperf.a
  315. LIB_H += ../../include/linux/perf_event.h
  316. LIB_H += ../../include/linux/rbtree.h
  317. LIB_H += ../../include/linux/list.h
  318. LIB_H += ../../include/linux/hash.h
  319. LIB_H += ../../include/linux/stringify.h
  320. LIB_H += util/include/linux/bitmap.h
  321. LIB_H += util/include/linux/bitops.h
  322. LIB_H += util/include/linux/compiler.h
  323. LIB_H += util/include/linux/ctype.h
  324. LIB_H += util/include/linux/kernel.h
  325. LIB_H += util/include/linux/list.h
  326. LIB_H += util/include/linux/module.h
  327. LIB_H += util/include/linux/poison.h
  328. LIB_H += util/include/linux/prefetch.h
  329. LIB_H += util/include/linux/rbtree.h
  330. LIB_H += util/include/linux/string.h
  331. LIB_H += util/include/linux/types.h
  332. LIB_H += util/include/asm/asm-offsets.h
  333. LIB_H += util/include/asm/bug.h
  334. LIB_H += util/include/asm/byteorder.h
  335. LIB_H += util/include/asm/hweight.h
  336. LIB_H += util/include/asm/swab.h
  337. LIB_H += util/include/asm/system.h
  338. LIB_H += util/include/asm/uaccess.h
  339. LIB_H += util/include/dwarf-regs.h
  340. LIB_H += perf.h
  341. LIB_H += util/cache.h
  342. LIB_H += util/callchain.h
  343. LIB_H += util/build-id.h
  344. LIB_H += util/debug.h
  345. LIB_H += util/debugfs.h
  346. LIB_H += util/event.h
  347. LIB_H += util/exec_cmd.h
  348. LIB_H += util/types.h
  349. LIB_H += util/levenshtein.h
  350. LIB_H += util/map.h
  351. LIB_H += util/parse-options.h
  352. LIB_H += util/parse-events.h
  353. LIB_H += util/quote.h
  354. LIB_H += util/util.h
  355. LIB_H += util/header.h
  356. LIB_H += util/help.h
  357. LIB_H += util/session.h
  358. LIB_H += util/strbuf.h
  359. LIB_H += util/strlist.h
  360. LIB_H += util/svghelper.h
  361. LIB_H += util/run-command.h
  362. LIB_H += util/sigchain.h
  363. LIB_H += util/symbol.h
  364. LIB_H += util/color.h
  365. LIB_H += util/values.h
  366. LIB_H += util/sort.h
  367. LIB_H += util/hist.h
  368. LIB_H += util/thread.h
  369. LIB_H += util/trace-event.h
  370. LIB_H += util/probe-finder.h
  371. LIB_H += util/probe-event.h
  372. LIB_H += util/pstack.h
  373. LIB_H += util/cpumap.h
  374. LIB_OBJS += $(OUTPUT)util/abspath.o
  375. LIB_OBJS += $(OUTPUT)util/alias.o
  376. LIB_OBJS += $(OUTPUT)util/build-id.o
  377. LIB_OBJS += $(OUTPUT)util/config.o
  378. LIB_OBJS += $(OUTPUT)util/ctype.o
  379. LIB_OBJS += $(OUTPUT)util/debugfs.o
  380. LIB_OBJS += $(OUTPUT)util/environment.o
  381. LIB_OBJS += $(OUTPUT)util/event.o
  382. LIB_OBJS += $(OUTPUT)util/exec_cmd.o
  383. LIB_OBJS += $(OUTPUT)util/help.o
  384. LIB_OBJS += $(OUTPUT)util/levenshtein.o
  385. LIB_OBJS += $(OUTPUT)util/parse-options.o
  386. LIB_OBJS += $(OUTPUT)util/parse-events.o
  387. LIB_OBJS += $(OUTPUT)util/path.o
  388. LIB_OBJS += $(OUTPUT)util/rbtree.o
  389. LIB_OBJS += $(OUTPUT)util/bitmap.o
  390. LIB_OBJS += $(OUTPUT)util/hweight.o
  391. LIB_OBJS += $(OUTPUT)util/run-command.o
  392. LIB_OBJS += $(OUTPUT)util/quote.o
  393. LIB_OBJS += $(OUTPUT)util/strbuf.o
  394. LIB_OBJS += $(OUTPUT)util/string.o
  395. LIB_OBJS += $(OUTPUT)util/strlist.o
  396. LIB_OBJS += $(OUTPUT)util/usage.o
  397. LIB_OBJS += $(OUTPUT)util/wrapper.o
  398. LIB_OBJS += $(OUTPUT)util/sigchain.o
  399. LIB_OBJS += $(OUTPUT)util/symbol.o
  400. LIB_OBJS += $(OUTPUT)util/color.o
  401. LIB_OBJS += $(OUTPUT)util/pager.o
  402. LIB_OBJS += $(OUTPUT)util/header.o
  403. LIB_OBJS += $(OUTPUT)util/callchain.o
  404. LIB_OBJS += $(OUTPUT)util/values.o
  405. LIB_OBJS += $(OUTPUT)util/debug.o
  406. LIB_OBJS += $(OUTPUT)util/map.o
  407. LIB_OBJS += $(OUTPUT)util/pstack.o
  408. LIB_OBJS += $(OUTPUT)util/session.o
  409. LIB_OBJS += $(OUTPUT)util/thread.o
  410. LIB_OBJS += $(OUTPUT)util/trace-event-parse.o
  411. LIB_OBJS += $(OUTPUT)util/trace-event-read.o
  412. LIB_OBJS += $(OUTPUT)util/trace-event-info.o
  413. LIB_OBJS += $(OUTPUT)util/trace-event-scripting.o
  414. LIB_OBJS += $(OUTPUT)util/svghelper.o
  415. LIB_OBJS += $(OUTPUT)util/sort.o
  416. LIB_OBJS += $(OUTPUT)util/hist.o
  417. LIB_OBJS += $(OUTPUT)util/probe-event.o
  418. LIB_OBJS += $(OUTPUT)util/util.o
  419. LIB_OBJS += $(OUTPUT)util/cpumap.o
  420. BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o
  421. BUILTIN_OBJS += $(OUTPUT)builtin-bench.o
  422. # Benchmark modules
  423. BUILTIN_OBJS += $(OUTPUT)bench/sched-messaging.o
  424. BUILTIN_OBJS += $(OUTPUT)bench/sched-pipe.o
  425. BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy.o
  426. BUILTIN_OBJS += $(OUTPUT)builtin-diff.o
  427. BUILTIN_OBJS += $(OUTPUT)builtin-help.o
  428. BUILTIN_OBJS += $(OUTPUT)builtin-sched.o
  429. BUILTIN_OBJS += $(OUTPUT)builtin-buildid-list.o
  430. BUILTIN_OBJS += $(OUTPUT)builtin-buildid-cache.o
  431. BUILTIN_OBJS += $(OUTPUT)builtin-list.o
  432. BUILTIN_OBJS += $(OUTPUT)builtin-record.o
  433. BUILTIN_OBJS += $(OUTPUT)builtin-report.o
  434. BUILTIN_OBJS += $(OUTPUT)builtin-stat.o
  435. BUILTIN_OBJS += $(OUTPUT)builtin-timechart.o
  436. BUILTIN_OBJS += $(OUTPUT)builtin-top.o
  437. BUILTIN_OBJS += $(OUTPUT)builtin-trace.o
  438. BUILTIN_OBJS += $(OUTPUT)builtin-probe.o
  439. BUILTIN_OBJS += $(OUTPUT)builtin-kmem.o
  440. BUILTIN_OBJS += $(OUTPUT)builtin-lock.o
  441. BUILTIN_OBJS += $(OUTPUT)builtin-kvm.o
  442. BUILTIN_OBJS += $(OUTPUT)builtin-test.o
  443. BUILTIN_OBJS += $(OUTPUT)builtin-inject.o
  444. PERFLIBS = $(LIB_FILE)
  445. #
  446. # Platform specific tweaks
  447. #
  448. # We choose to avoid "if .. else if .. else .. endif endif"
  449. # because maintaining the nesting to match is a pain. If
  450. # we had "elif" things would have been much nicer...
  451. -include config.mak.autogen
  452. -include config.mak
  453. ifndef NO_DWARF
  454. FLAGS_DWARF=$(ALL_CFLAGS) -I/usr/include/elfutils -ldw -lelf $(ALL_LDFLAGS) $(EXTLIBS)
  455. ifneq ($(call try-cc,$(SOURCE_DWARF),$(FLAGS_DWARF)),y)
  456. msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
  457. NO_DWARF := 1
  458. endif # Dwarf support
  459. endif # NO_DWARF
  460. -include arch/$(ARCH)/Makefile
  461. ifeq ($(uname_S),Darwin)
  462. ifndef NO_FINK
  463. ifeq ($(shell test -d /sw/lib && echo y),y)
  464. BASIC_CFLAGS += -I/sw/include
  465. BASIC_LDFLAGS += -L/sw/lib
  466. endif
  467. endif
  468. ifndef NO_DARWIN_PORTS
  469. ifeq ($(shell test -d /opt/local/lib && echo y),y)
  470. BASIC_CFLAGS += -I/opt/local/include
  471. BASIC_LDFLAGS += -L/opt/local/lib
  472. endif
  473. endif
  474. PTHREAD_LIBS =
  475. endif
  476. ifneq ($(OUTPUT),)
  477. BASIC_CFLAGS += -I$(OUTPUT)
  478. endif
  479. FLAGS_LIBELF=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS)
  480. ifneq ($(call try-cc,$(SOURCE_LIBELF),$(FLAGS_LIBELF)),y)
  481. FLAGS_GLIBC=$(ALL_CFLAGS) $(ALL_LDFLAGS)
  482. ifneq ($(call try-cc,$(SOURCE_GLIBC),$(FLAGS_GLIBC)),y)
  483. msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
  484. else
  485. msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel);
  486. endif
  487. endif
  488. ifneq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_COMMON)),y)
  489. BASIC_CFLAGS += -DLIBELF_NO_MMAP
  490. endif
  491. ifndef NO_DWARF
  492. ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
  493. msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
  494. else
  495. BASIC_CFLAGS += -I/usr/include/elfutils -DDWARF_SUPPORT
  496. EXTLIBS += -lelf -ldw
  497. LIB_OBJS += $(OUTPUT)util/probe-finder.o
  498. endif # PERF_HAVE_DWARF_REGS
  499. endif # NO_DWARF
  500. ifdef NO_NEWT
  501. BASIC_CFLAGS += -DNO_NEWT_SUPPORT
  502. else
  503. FLAGS_NEWT=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -lnewt
  504. ifneq ($(call try-cc,$(SOURCE_NEWT),$(FLAGS_NEWT)),y)
  505. msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev);
  506. BASIC_CFLAGS += -DNO_NEWT_SUPPORT
  507. else
  508. # Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
  509. BASIC_CFLAGS += -I/usr/include/slang
  510. EXTLIBS += -lnewt -lslang
  511. LIB_OBJS += $(OUTPUT)util/ui/setup.o
  512. LIB_OBJS += $(OUTPUT)util/ui/browser.o
  513. LIB_OBJS += $(OUTPUT)util/ui/browsers/annotate.o
  514. LIB_OBJS += $(OUTPUT)util/ui/browsers/hists.o
  515. LIB_OBJS += $(OUTPUT)util/ui/browsers/map.o
  516. LIB_OBJS += $(OUTPUT)util/ui/helpline.o
  517. LIB_OBJS += $(OUTPUT)util/ui/progress.o
  518. LIB_OBJS += $(OUTPUT)util/ui/util.o
  519. LIB_H += util/ui/browser.h
  520. LIB_H += util/ui/browsers/map.h
  521. LIB_H += util/ui/helpline.h
  522. LIB_H += util/ui/libslang.h
  523. LIB_H += util/ui/progress.h
  524. LIB_H += util/ui/util.h
  525. endif
  526. endif
  527. ifdef NO_LIBPERL
  528. BASIC_CFLAGS += -DNO_LIBPERL
  529. else
  530. PERL_EMBED_LDOPTS = `perl -MExtUtils::Embed -e ldopts 2>/dev/null`
  531. PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
  532. FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
  533. ifneq ($(call try-cc,$(SOURCE_PERL_EMBED),$(FLAGS_PERL_EMBED)),y)
  534. BASIC_CFLAGS += -DNO_LIBPERL
  535. else
  536. ALL_LDFLAGS += $(PERL_EMBED_LDOPTS)
  537. LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-perl.o
  538. LIB_OBJS += $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o
  539. endif
  540. endif
  541. ifdef NO_LIBPYTHON
  542. BASIC_CFLAGS += -DNO_LIBPYTHON
  543. else
  544. PYTHON_EMBED_LDOPTS = `python-config --ldflags 2>/dev/null`
  545. PYTHON_EMBED_CCOPTS = `python-config --cflags 2>/dev/null`
  546. FLAGS_PYTHON_EMBED=$(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
  547. ifneq ($(call try-cc,$(SOURCE_PYTHON_EMBED),$(FLAGS_PYTHON_EMBED)),y)
  548. BASIC_CFLAGS += -DNO_LIBPYTHON
  549. else
  550. ALL_LDFLAGS += $(PYTHON_EMBED_LDOPTS)
  551. LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
  552. LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
  553. endif
  554. endif
  555. ifdef NO_DEMANGLE
  556. BASIC_CFLAGS += -DNO_DEMANGLE
  557. else
  558. ifdef HAVE_CPLUS_DEMANGLE
  559. EXTLIBS += -liberty
  560. BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
  561. else
  562. FLAGS_BFD=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd
  563. has_bfd := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD))
  564. ifeq ($(has_bfd),y)
  565. EXTLIBS += -lbfd
  566. else
  567. FLAGS_BFD_IBERTY=$(FLAGS_BFD) -liberty
  568. has_bfd_iberty := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY))
  569. ifeq ($(has_bfd_iberty),y)
  570. EXTLIBS += -lbfd -liberty
  571. else
  572. FLAGS_BFD_IBERTY_Z=$(FLAGS_BFD_IBERTY) -lz
  573. has_bfd_iberty_z := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY_Z))
  574. ifeq ($(has_bfd_iberty_z),y)
  575. EXTLIBS += -lbfd -liberty -lz
  576. else
  577. FLAGS_CPLUS_DEMANGLE=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -liberty
  578. has_cplus_demangle := $(call try-cc,$(SOURCE_CPLUS_DEMANGLE),$(FLAGS_CPLUS_DEMANGLE))
  579. ifeq ($(has_cplus_demangle),y)
  580. EXTLIBS += -liberty
  581. BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
  582. else
  583. msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
  584. BASIC_CFLAGS += -DNO_DEMANGLE
  585. endif
  586. endif
  587. endif
  588. endif
  589. endif
  590. endif
  591. ifndef CC_LD_DYNPATH
  592. ifdef NO_R_TO_GCC_LINKER
  593. # Some gcc does not accept and pass -R to the linker to specify
  594. # the runtime dynamic library path.
  595. CC_LD_DYNPATH = -Wl,-rpath,
  596. else
  597. CC_LD_DYNPATH = -R
  598. endif
  599. endif
  600. ifdef NEEDS_SOCKET
  601. EXTLIBS += -lsocket
  602. endif
  603. ifdef NEEDS_NSL
  604. EXTLIBS += -lnsl
  605. endif
  606. ifdef NO_D_TYPE_IN_DIRENT
  607. BASIC_CFLAGS += -DNO_D_TYPE_IN_DIRENT
  608. endif
  609. ifdef NO_D_INO_IN_DIRENT
  610. BASIC_CFLAGS += -DNO_D_INO_IN_DIRENT
  611. endif
  612. ifdef NO_ST_BLOCKS_IN_STRUCT_STAT
  613. BASIC_CFLAGS += -DNO_ST_BLOCKS_IN_STRUCT_STAT
  614. endif
  615. ifdef USE_NSEC
  616. BASIC_CFLAGS += -DUSE_NSEC
  617. endif
  618. ifdef USE_ST_TIMESPEC
  619. BASIC_CFLAGS += -DUSE_ST_TIMESPEC
  620. endif
  621. ifdef NO_NSEC
  622. BASIC_CFLAGS += -DNO_NSEC
  623. endif
  624. ifdef NO_C99_FORMAT
  625. BASIC_CFLAGS += -DNO_C99_FORMAT
  626. endif
  627. ifdef SNPRINTF_RETURNS_BOGUS
  628. COMPAT_CFLAGS += -DSNPRINTF_RETURNS_BOGUS
  629. COMPAT_OBJS += $(OUTPUT)compat/snprintf.o
  630. endif
  631. ifdef FREAD_READS_DIRECTORIES
  632. COMPAT_CFLAGS += -DFREAD_READS_DIRECTORIES
  633. COMPAT_OBJS += $(OUTPUT)compat/fopen.o
  634. endif
  635. ifdef NO_SYMLINK_HEAD
  636. BASIC_CFLAGS += -DNO_SYMLINK_HEAD
  637. endif
  638. ifdef NO_STRCASESTR
  639. COMPAT_CFLAGS += -DNO_STRCASESTR
  640. COMPAT_OBJS += $(OUTPUT)compat/strcasestr.o
  641. endif
  642. ifdef NO_STRTOUMAX
  643. COMPAT_CFLAGS += -DNO_STRTOUMAX
  644. COMPAT_OBJS += $(OUTPUT)compat/strtoumax.o
  645. endif
  646. ifdef NO_STRTOULL
  647. COMPAT_CFLAGS += -DNO_STRTOULL
  648. endif
  649. ifdef NO_SETENV
  650. COMPAT_CFLAGS += -DNO_SETENV
  651. COMPAT_OBJS += $(OUTPUT)compat/setenv.o
  652. endif
  653. ifdef NO_MKDTEMP
  654. COMPAT_CFLAGS += -DNO_MKDTEMP
  655. COMPAT_OBJS += $(OUTPUT)compat/mkdtemp.o
  656. endif
  657. ifdef NO_UNSETENV
  658. COMPAT_CFLAGS += -DNO_UNSETENV
  659. COMPAT_OBJS += $(OUTPUT)compat/unsetenv.o
  660. endif
  661. ifdef NO_SYS_SELECT_H
  662. BASIC_CFLAGS += -DNO_SYS_SELECT_H
  663. endif
  664. ifdef NO_MMAP
  665. COMPAT_CFLAGS += -DNO_MMAP
  666. COMPAT_OBJS += $(OUTPUT)compat/mmap.o
  667. else
  668. ifdef USE_WIN32_MMAP
  669. COMPAT_CFLAGS += -DUSE_WIN32_MMAP
  670. COMPAT_OBJS += $(OUTPUT)compat/win32mmap.o
  671. endif
  672. endif
  673. ifdef NO_PREAD
  674. COMPAT_CFLAGS += -DNO_PREAD
  675. COMPAT_OBJS += $(OUTPUT)compat/pread.o
  676. endif
  677. ifdef NO_FAST_WORKING_DIRECTORY
  678. BASIC_CFLAGS += -DNO_FAST_WORKING_DIRECTORY
  679. endif
  680. ifdef NO_TRUSTABLE_FILEMODE
  681. BASIC_CFLAGS += -DNO_TRUSTABLE_FILEMODE
  682. endif
  683. ifdef NO_IPV6
  684. BASIC_CFLAGS += -DNO_IPV6
  685. endif
  686. ifdef NO_UINTMAX_T
  687. BASIC_CFLAGS += -Duintmax_t=uint32_t
  688. endif
  689. ifdef NO_SOCKADDR_STORAGE
  690. ifdef NO_IPV6
  691. BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in
  692. else
  693. BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in6
  694. endif
  695. endif
  696. ifdef NO_INET_NTOP
  697. LIB_OBJS += $(OUTPUT)compat/inet_ntop.o
  698. endif
  699. ifdef NO_INET_PTON
  700. LIB_OBJS += $(OUTPUT)compat/inet_pton.o
  701. endif
  702. ifdef NO_ICONV
  703. BASIC_CFLAGS += -DNO_ICONV
  704. endif
  705. ifdef OLD_ICONV
  706. BASIC_CFLAGS += -DOLD_ICONV
  707. endif
  708. ifdef NO_DEFLATE_BOUND
  709. BASIC_CFLAGS += -DNO_DEFLATE_BOUND
  710. endif
  711. ifdef PPC_SHA1
  712. SHA1_HEADER = "ppc/sha1.h"
  713. LIB_OBJS += $(OUTPUT)ppc/sha1.o ppc/sha1ppc.o
  714. else
  715. ifdef ARM_SHA1
  716. SHA1_HEADER = "arm/sha1.h"
  717. LIB_OBJS += $(OUTPUT)arm/sha1.o $(OUTPUT)arm/sha1_arm.o
  718. else
  719. ifdef MOZILLA_SHA1
  720. SHA1_HEADER = "mozilla-sha1/sha1.h"
  721. LIB_OBJS += $(OUTPUT)mozilla-sha1/sha1.o
  722. else
  723. SHA1_HEADER = <openssl/sha.h>
  724. EXTLIBS += $(LIB_4_CRYPTO)
  725. endif
  726. endif
  727. endif
  728. ifdef NO_PERL_MAKEMAKER
  729. export NO_PERL_MAKEMAKER
  730. endif
  731. ifdef NO_HSTRERROR
  732. COMPAT_CFLAGS += -DNO_HSTRERROR
  733. COMPAT_OBJS += $(OUTPUT)compat/hstrerror.o
  734. endif
  735. ifdef NO_MEMMEM
  736. COMPAT_CFLAGS += -DNO_MEMMEM
  737. COMPAT_OBJS += $(OUTPUT)compat/memmem.o
  738. endif
  739. ifdef INTERNAL_QSORT
  740. COMPAT_CFLAGS += -DINTERNAL_QSORT
  741. COMPAT_OBJS += $(OUTPUT)compat/qsort.o
  742. endif
  743. ifdef RUNTIME_PREFIX
  744. COMPAT_CFLAGS += -DRUNTIME_PREFIX
  745. endif
  746. ifdef DIR_HAS_BSD_GROUP_SEMANTICS
  747. COMPAT_CFLAGS += -DDIR_HAS_BSD_GROUP_SEMANTICS
  748. endif
  749. ifdef NO_EXTERNAL_GREP
  750. BASIC_CFLAGS += -DNO_EXTERNAL_GREP
  751. endif
  752. ifeq ($(PERL_PATH),)
  753. NO_PERL=NoThanks
  754. endif
  755. QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir
  756. QUIET_SUBDIR1 =
  757. ifneq ($(findstring $(MAKEFLAGS),w),w)
  758. PRINT_DIR = --no-print-directory
  759. else # "make -w"
  760. NO_SUBDIR = :
  761. endif
  762. ifneq ($(findstring $(MAKEFLAGS),s),s)
  763. ifndef V
  764. QUIET_CC = @echo ' ' CC $@;
  765. QUIET_AR = @echo ' ' AR $@;
  766. QUIET_LINK = @echo ' ' LINK $@;
  767. QUIET_MKDIR = @echo ' ' MKDIR $@;
  768. QUIET_BUILT_IN = @echo ' ' BUILTIN $@;
  769. QUIET_GEN = @echo ' ' GEN $@;
  770. QUIET_SUBDIR0 = +@subdir=
  771. QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \
  772. $(MAKE) $(PRINT_DIR) -C $$subdir
  773. export V
  774. export QUIET_GEN
  775. export QUIET_BUILT_IN
  776. endif
  777. endif
  778. ifdef ASCIIDOC8
  779. export ASCIIDOC8
  780. endif
  781. # Shell quote (do not use $(call) to accommodate ancient setups);
  782. SHA1_HEADER_SQ = $(subst ','\'',$(SHA1_HEADER))
  783. ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
  784. DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
  785. bindir_SQ = $(subst ','\'',$(bindir))
  786. bindir_relative_SQ = $(subst ','\'',$(bindir_relative))
  787. mandir_SQ = $(subst ','\'',$(mandir))
  788. infodir_SQ = $(subst ','\'',$(infodir))
  789. perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
  790. template_dir_SQ = $(subst ','\'',$(template_dir))
  791. htmldir_SQ = $(subst ','\'',$(htmldir))
  792. prefix_SQ = $(subst ','\'',$(prefix))
  793. SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
  794. PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
  795. LIBS = $(PERFLIBS) $(EXTLIBS)
  796. BASIC_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' \
  797. $(COMPAT_CFLAGS)
  798. LIB_OBJS += $(COMPAT_OBJS)
  799. ALL_CFLAGS += $(BASIC_CFLAGS)
  800. ALL_LDFLAGS += $(BASIC_LDFLAGS)
  801. export TAR INSTALL DESTDIR SHELL_PATH
  802. ### Build rules
  803. SHELL = $(SHELL_PATH)
  804. all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) $(OUTPUT)PERF-BUILD-OPTIONS
  805. ifneq (,$X)
  806. $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';)
  807. endif
  808. all::
  809. please_set_SHELL_PATH_to_a_more_modern_shell:
  810. @$$(:)
  811. shell_compatibility_test: please_set_SHELL_PATH_to_a_more_modern_shell
  812. strip: $(PROGRAMS) $(OUTPUT)perf$X
  813. $(STRIP) $(STRIP_OPTS) $(PROGRAMS) $(OUTPUT)perf$X
  814. $(OUTPUT)perf.o: perf.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
  815. $(QUIET_CC)$(CC) -DPERF_VERSION='"$(PERF_VERSION)"' \
  816. '-DPERF_HTML_PATH="$(htmldir_SQ)"' \
  817. $(ALL_CFLAGS) -c $(filter %.c,$^) -o $@
  818. $(OUTPUT)perf$X: $(OUTPUT)perf.o $(BUILTIN_OBJS) $(PERFLIBS)
  819. $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(OUTPUT)perf.o \
  820. $(BUILTIN_OBJS) $(ALL_LDFLAGS) $(LIBS)
  821. $(OUTPUT)builtin-help.o: builtin-help.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
  822. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
  823. '-DPERF_HTML_PATH="$(htmldir_SQ)"' \
  824. '-DPERF_MAN_PATH="$(mandir_SQ)"' \
  825. '-DPERF_INFO_PATH="$(infodir_SQ)"' $<
  826. $(OUTPUT)builtin-timechart.o: builtin-timechart.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
  827. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
  828. '-DPERF_HTML_PATH="$(htmldir_SQ)"' \
  829. '-DPERF_MAN_PATH="$(mandir_SQ)"' \
  830. '-DPERF_INFO_PATH="$(infodir_SQ)"' $<
  831. $(BUILT_INS): $(OUTPUT)perf$X
  832. $(QUIET_BUILT_IN)$(RM) $@ && \
  833. ln perf$X $@ 2>/dev/null || \
  834. ln -s perf$X $@ 2>/dev/null || \
  835. cp perf$X $@
  836. $(OUTPUT)common-cmds.h: util/generate-cmdlist.sh command-list.txt
  837. $(OUTPUT)common-cmds.h: $(wildcard Documentation/perf-*.txt)
  838. $(QUIET_GEN). util/generate-cmdlist.sh > $@+ && mv $@+ $@
  839. $(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh
  840. $(QUIET_GEN)$(RM) $@ $@+ && \
  841. sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
  842. -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \
  843. -e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \
  844. -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \
  845. -e 's/@@NO_CURL@@/$(NO_CURL)/g' \
  846. $@.sh >$@+ && \
  847. chmod +x $@+ && \
  848. mv $@+ $(OUTPUT)$@
  849. configure: configure.ac
  850. $(QUIET_GEN)$(RM) $@ $<+ && \
  851. sed -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \
  852. $< > $<+ && \
  853. autoconf -o $@ $<+ && \
  854. $(RM) $<+
  855. # These can record PERF_VERSION
  856. $(OUTPUT)perf.o perf.spec \
  857. $(patsubst %.sh,%,$(SCRIPT_SH)) \
  858. $(patsubst %.perl,%,$(SCRIPT_PERL)) \
  859. : $(OUTPUT)PERF-VERSION-FILE
  860. $(OUTPUT)%.o: %.c $(OUTPUT)PERF-CFLAGS
  861. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $<
  862. $(OUTPUT)%.s: %.c $(OUTPUT)PERF-CFLAGS
  863. $(QUIET_CC)$(CC) -S $(ALL_CFLAGS) $<
  864. $(OUTPUT)%.o: %.S
  865. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $<
  866. $(OUTPUT)util/exec_cmd.o: util/exec_cmd.c $(OUTPUT)PERF-CFLAGS
  867. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
  868. '-DPERF_EXEC_PATH="$(perfexecdir_SQ)"' \
  869. '-DBINDIR="$(bindir_relative_SQ)"' \
  870. '-DPREFIX="$(prefix_SQ)"' \
  871. $<
  872. $(OUTPUT)builtin-init-db.o: builtin-init-db.c $(OUTPUT)PERF-CFLAGS
  873. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DDEFAULT_PERF_TEMPLATE_DIR='"$(template_dir_SQ)"' $<
  874. $(OUTPUT)util/config.o: util/config.c $(OUTPUT)PERF-CFLAGS
  875. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
  876. $(OUTPUT)util/ui/browser.o: util/ui/browser.c $(OUTPUT)PERF-CFLAGS
  877. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  878. $(OUTPUT)util/ui/browsers/annotate.o: util/ui/browsers/annotate.c $(OUTPUT)PERF-CFLAGS
  879. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  880. $(OUTPUT)util/ui/browsers/hists.o: util/ui/browsers/hists.c $(OUTPUT)PERF-CFLAGS
  881. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  882. $(OUTPUT)util/ui/browsers/map.o: util/ui/browsers/map.c $(OUTPUT)PERF-CFLAGS
  883. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  884. $(OUTPUT)util/rbtree.o: ../../lib/rbtree.c $(OUTPUT)PERF-CFLAGS
  885. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
  886. $(OUTPUT)util/scripting-engines/trace-event-perl.o: util/scripting-engines/trace-event-perl.c $(OUTPUT)PERF-CFLAGS
  887. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
  888. $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o: scripts/perl/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
  889. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
  890. $(OUTPUT)util/scripting-engines/trace-event-python.o: util/scripting-engines/trace-event-python.c $(OUTPUT)PERF-CFLAGS
  891. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
  892. $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o: scripts/python/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
  893. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
  894. $(OUTPUT)perf-%$X: %.o $(PERFLIBS)
  895. $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
  896. $(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H)
  897. $(patsubst perf-%$X,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h)
  898. builtin-revert.o wt-status.o: wt-status.h
  899. # we compile into subdirectories. if the target directory is not the source directory, they might not exists. So
  900. # we depend the various files onto their directories.
  901. DIRECTORY_DEPS = $(LIB_OBJS) $(BUILTIN_OBJS) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h
  902. $(DIRECTORY_DEPS): $(sort $(dir $(DIRECTORY_DEPS)))
  903. # In the second step, we make a rule to actually create these directories
  904. $(sort $(dir $(DIRECTORY_DEPS))):
  905. $(QUIET_MKDIR)$(MKDIR) -p $@ 2>/dev/null
  906. $(LIB_FILE): $(LIB_OBJS)
  907. $(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIB_OBJS)
  908. doc:
  909. $(MAKE) -C Documentation all
  910. man:
  911. $(MAKE) -C Documentation man
  912. html:
  913. $(MAKE) -C Documentation html
  914. info:
  915. $(MAKE) -C Documentation info
  916. pdf:
  917. $(MAKE) -C Documentation pdf
  918. TAGS:
  919. $(RM) TAGS
  920. $(FIND) . -name '*.[hcS]' -print | xargs etags -a
  921. tags:
  922. $(RM) tags
  923. $(FIND) . -name '*.[hcS]' -print | xargs ctags -a
  924. cscope:
  925. $(RM) cscope*
  926. $(FIND) . -name '*.[hcS]' -print | xargs cscope -b
  927. ### Detect prefix changes
  928. TRACK_CFLAGS = $(subst ','\'',$(ALL_CFLAGS)):\
  929. $(bindir_SQ):$(perfexecdir_SQ):$(template_dir_SQ):$(prefix_SQ)
  930. $(OUTPUT)PERF-CFLAGS: .FORCE-PERF-CFLAGS
  931. @FLAGS='$(TRACK_CFLAGS)'; \
  932. if test x"$$FLAGS" != x"`cat $(OUTPUT)PERF-CFLAGS 2>/dev/null`" ; then \
  933. echo 1>&2 " * new build flags or prefix"; \
  934. echo "$$FLAGS" >$(OUTPUT)PERF-CFLAGS; \
  935. fi
  936. # We need to apply sq twice, once to protect from the shell
  937. # that runs $(OUTPUT)PERF-BUILD-OPTIONS, and then again to protect it
  938. # and the first level quoting from the shell that runs "echo".
  939. $(OUTPUT)PERF-BUILD-OPTIONS: .FORCE-PERF-BUILD-OPTIONS
  940. @echo SHELL_PATH=\''$(subst ','\'',$(SHELL_PATH_SQ))'\' >$@
  941. @echo TAR=\''$(subst ','\'',$(subst ','\'',$(TAR)))'\' >>$@
  942. @echo NO_CURL=\''$(subst ','\'',$(subst ','\'',$(NO_CURL)))'\' >>$@
  943. @echo NO_PERL=\''$(subst ','\'',$(subst ','\'',$(NO_PERL)))'\' >>$@
  944. ### Testing rules
  945. #
  946. # None right now:
  947. #
  948. # TEST_PROGRAMS += test-something$X
  949. all:: $(TEST_PROGRAMS)
  950. # GNU make supports exporting all variables by "export" without parameters.
  951. # However, the environment gets quite big, and some programs have problems
  952. # with that.
  953. export NO_SVN_TESTS
  954. check: $(OUTPUT)common-cmds.h
  955. if sparse; \
  956. then \
  957. for i in *.c */*.c; \
  958. do \
  959. sparse $(ALL_CFLAGS) $(SPARSE_FLAGS) $$i || exit; \
  960. done; \
  961. else \
  962. echo 2>&1 "Did you mean 'make test'?"; \
  963. exit 1; \
  964. fi
  965. remove-dashes:
  966. ./fixup-builtins $(BUILT_INS) $(PROGRAMS) $(SCRIPTS)
  967. ### Installation rules
  968. ifneq ($(filter /%,$(firstword $(template_dir))),)
  969. template_instdir = $(template_dir)
  970. else
  971. template_instdir = $(prefix)/$(template_dir)
  972. endif
  973. export template_instdir
  974. ifneq ($(filter /%,$(firstword $(perfexecdir))),)
  975. perfexec_instdir = $(perfexecdir)
  976. else
  977. perfexec_instdir = $(prefix)/$(perfexecdir)
  978. endif
  979. perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
  980. export perfexec_instdir
  981. install: all
  982. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
  983. $(INSTALL) $(OUTPUT)perf$X '$(DESTDIR_SQ)$(bindir_SQ)'
  984. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
  985. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
  986. $(INSTALL) $(OUTPUT)perf-archive -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
  987. $(INSTALL) scripts/perl/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
  988. $(INSTALL) scripts/perl/*.pl -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl'
  989. $(INSTALL) scripts/perl/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
  990. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'
  991. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
  992. $(INSTALL) scripts/python/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'
  993. $(INSTALL) scripts/python/*.py -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python'
  994. $(INSTALL) scripts/python/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
  995. ifdef BUILT_INS
  996. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
  997. $(INSTALL) $(BUILT_INS) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
  998. ifneq (,$X)
  999. $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) $(OUTPUT)perf$X)), $(RM) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/$p';)
  1000. endif
  1001. endif
  1002. install-doc:
  1003. $(MAKE) -C Documentation install
  1004. install-man:
  1005. $(MAKE) -C Documentation install-man
  1006. install-html:
  1007. $(MAKE) -C Documentation install-html
  1008. install-info:
  1009. $(MAKE) -C Documentation install-info
  1010. install-pdf:
  1011. $(MAKE) -C Documentation install-pdf
  1012. quick-install-doc:
  1013. $(MAKE) -C Documentation quick-install
  1014. quick-install-man:
  1015. $(MAKE) -C Documentation quick-install-man
  1016. quick-install-html:
  1017. $(MAKE) -C Documentation quick-install-html
  1018. ### Maintainer's dist rules
  1019. #
  1020. # None right now
  1021. #
  1022. #
  1023. # perf.spec: perf.spec.in
  1024. # sed -e 's/@@VERSION@@/$(PERF_VERSION)/g' < $< > $@+
  1025. # mv $@+ $@
  1026. #
  1027. # PERF_TARNAME=perf-$(PERF_VERSION)
  1028. # dist: perf.spec perf-archive$(X) configure
  1029. # ./perf-archive --format=tar \
  1030. # --prefix=$(PERF_TARNAME)/ HEAD^{tree} > $(PERF_TARNAME).tar
  1031. # @mkdir -p $(PERF_TARNAME)
  1032. # @cp perf.spec configure $(PERF_TARNAME)
  1033. # @echo $(PERF_VERSION) > $(PERF_TARNAME)/version
  1034. # $(TAR) rf $(PERF_TARNAME).tar \
  1035. # $(PERF_TARNAME)/perf.spec \
  1036. # $(PERF_TARNAME)/configure \
  1037. # $(PERF_TARNAME)/version
  1038. # @$(RM) -r $(PERF_TARNAME)
  1039. # gzip -f -9 $(PERF_TARNAME).tar
  1040. #
  1041. # htmldocs = perf-htmldocs-$(PERF_VERSION)
  1042. # manpages = perf-manpages-$(PERF_VERSION)
  1043. # dist-doc:
  1044. # $(RM) -r .doc-tmp-dir
  1045. # mkdir .doc-tmp-dir
  1046. # $(MAKE) -C Documentation WEBDOC_DEST=../.doc-tmp-dir install-webdoc
  1047. # cd .doc-tmp-dir && $(TAR) cf ../$(htmldocs).tar .
  1048. # gzip -n -9 -f $(htmldocs).tar
  1049. # :
  1050. # $(RM) -r .doc-tmp-dir
  1051. # mkdir -p .doc-tmp-dir/man1 .doc-tmp-dir/man5 .doc-tmp-dir/man7
  1052. # $(MAKE) -C Documentation DESTDIR=./ \
  1053. # man1dir=../.doc-tmp-dir/man1 \
  1054. # man5dir=../.doc-tmp-dir/man5 \
  1055. # man7dir=../.doc-tmp-dir/man7 \
  1056. # install
  1057. # cd .doc-tmp-dir && $(TAR) cf ../$(manpages).tar .
  1058. # gzip -n -9 -f $(manpages).tar
  1059. # $(RM) -r .doc-tmp-dir
  1060. #
  1061. # rpm: dist
  1062. # $(RPMBUILD) -ta $(PERF_TARNAME).tar.gz
  1063. ### Cleaning rules
  1064. distclean: clean
  1065. # $(RM) configure
  1066. clean:
  1067. $(RM) *.o */*.o */*/*.o */*/*/*.o $(LIB_FILE)
  1068. $(RM) $(ALL_PROGRAMS) $(BUILT_INS) perf$X
  1069. $(RM) $(TEST_PROGRAMS)
  1070. $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope*
  1071. $(RM) -r autom4te.cache
  1072. $(RM) config.log config.mak.autogen config.mak.append config.status config.cache
  1073. $(RM) -r $(PERF_TARNAME) .doc-tmp-dir
  1074. $(RM) $(PERF_TARNAME).tar.gz perf-core_$(PERF_VERSION)-*.tar.gz
  1075. $(RM) $(htmldocs).tar.gz $(manpages).tar.gz
  1076. $(MAKE) -C Documentation/ clean
  1077. $(RM) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS $(OUTPUT)PERF-BUILD-OPTIONS
  1078. .PHONY: all install clean strip
  1079. .PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
  1080. .PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS
  1081. .PHONY: .FORCE-PERF-BUILD-OPTIONS
  1082. ### Make sure built-ins do not have dups and listed in perf.c
  1083. #
  1084. check-builtins::
  1085. ./check-builtins.sh
  1086. ### Test suite coverage testing
  1087. #
  1088. # None right now
  1089. #
  1090. # .PHONY: coverage coverage-clean coverage-build coverage-report
  1091. #
  1092. # coverage:
  1093. # $(MAKE) coverage-build
  1094. # $(MAKE) coverage-report
  1095. #
  1096. # coverage-clean:
  1097. # rm -f *.gcda *.gcno
  1098. #
  1099. # COVERAGE_CFLAGS = $(CFLAGS) -O0 -ftest-coverage -fprofile-arcs
  1100. # COVERAGE_LDFLAGS = $(CFLAGS) -O0 -lgcov
  1101. #
  1102. # coverage-build: coverage-clean
  1103. # $(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" all
  1104. # $(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" \
  1105. # -j1 test
  1106. #
  1107. # coverage-report:
  1108. # gcov -b *.c */*.c
  1109. # grep '^function.*called 0 ' *.c.gcov */*.c.gcov \
  1110. # | sed -e 's/\([^:]*\)\.gcov: *function \([^ ]*\) called.*/\1: \2/' \
  1111. # | tee coverage-untested-functions