iwl-core.c 42 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515
  1. /******************************************************************************
  2. *
  3. * GPL LICENSE SUMMARY
  4. *
  5. * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
  6. *
  7. * This program is free software; you can redistribute it and/or modify
  8. * it under the terms of version 2 of the GNU General Public License as
  9. * published by the Free Software Foundation.
  10. *
  11. * This program is distributed in the hope that it will be useful, but
  12. * WITHOUT ANY WARRANTY; without even the implied warranty of
  13. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  14. * General Public License for more details.
  15. *
  16. * You should have received a copy of the GNU General Public License
  17. * along with this program; if not, write to the Free Software
  18. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  19. * USA
  20. *
  21. * The full GNU General Public License is included in this distribution
  22. * in the file called LICENSE.GPL.
  23. *
  24. * Contact Information:
  25. * Intel Linux Wireless <ilw@linux.intel.com>
  26. * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  27. *****************************************************************************/
  28. #include <linux/kernel.h>
  29. #include <linux/module.h>
  30. #include <net/mac80211.h>
  31. #include "iwl-eeprom.h"
  32. #include "iwl-dev.h" /* FIXME: remove */
  33. #include "iwl-debug.h"
  34. #include "iwl-core.h"
  35. #include "iwl-io.h"
  36. #include "iwl-rfkill.h"
  37. #include "iwl-power.h"
  38. #include "iwl-sta.h"
  39. MODULE_DESCRIPTION("iwl core");
  40. MODULE_VERSION(IWLWIFI_VERSION);
  41. MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
  42. MODULE_LICENSE("GPL");
  43. #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
  44. [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
  45. IWL_RATE_SISO_##s##M_PLCP, \
  46. IWL_RATE_MIMO2_##s##M_PLCP,\
  47. IWL_RATE_MIMO3_##s##M_PLCP,\
  48. IWL_RATE_##r##M_IEEE, \
  49. IWL_RATE_##ip##M_INDEX, \
  50. IWL_RATE_##in##M_INDEX, \
  51. IWL_RATE_##rp##M_INDEX, \
  52. IWL_RATE_##rn##M_INDEX, \
  53. IWL_RATE_##pp##M_INDEX, \
  54. IWL_RATE_##np##M_INDEX }
  55. /*
  56. * Parameter order:
  57. * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
  58. *
  59. * If there isn't a valid next or previous rate then INV is used which
  60. * maps to IWL_RATE_INVALID
  61. *
  62. */
  63. const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
  64. IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
  65. IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
  66. IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
  67. IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
  68. IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
  69. IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
  70. IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
  71. IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
  72. IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
  73. IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
  74. IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
  75. IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
  76. IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
  77. /* FIXME:RS: ^^ should be INV (legacy) */
  78. };
  79. EXPORT_SYMBOL(iwl_rates);
  80. /**
  81. * translate ucode response to mac80211 tx status control values
  82. */
  83. void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags,
  84. struct ieee80211_tx_info *info)
  85. {
  86. int rate_index;
  87. struct ieee80211_tx_rate *r = &info->control.rates[0];
  88. info->antenna_sel_tx =
  89. ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
  90. if (rate_n_flags & RATE_MCS_HT_MSK)
  91. r->flags |= IEEE80211_TX_RC_MCS;
  92. if (rate_n_flags & RATE_MCS_GF_MSK)
  93. r->flags |= IEEE80211_TX_RC_GREEN_FIELD;
  94. if (rate_n_flags & RATE_MCS_FAT_MSK)
  95. r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
  96. if (rate_n_flags & RATE_MCS_DUP_MSK)
  97. r->flags |= IEEE80211_TX_RC_DUP_DATA;
  98. if (rate_n_flags & RATE_MCS_SGI_MSK)
  99. r->flags |= IEEE80211_TX_RC_SHORT_GI;
  100. rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags);
  101. if (info->band == IEEE80211_BAND_5GHZ)
  102. rate_index -= IWL_FIRST_OFDM_RATE;
  103. r->idx = rate_index;
  104. }
  105. EXPORT_SYMBOL(iwl_hwrate_to_tx_control);
  106. int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
  107. {
  108. int idx = 0;
  109. /* HT rate format */
  110. if (rate_n_flags & RATE_MCS_HT_MSK) {
  111. idx = (rate_n_flags & 0xff);
  112. if (idx >= IWL_RATE_MIMO3_6M_PLCP)
  113. idx = idx - IWL_RATE_MIMO3_6M_PLCP;
  114. else if (idx >= IWL_RATE_MIMO2_6M_PLCP)
  115. idx = idx - IWL_RATE_MIMO2_6M_PLCP;
  116. idx += IWL_FIRST_OFDM_RATE;
  117. /* skip 9M not supported in ht*/
  118. if (idx >= IWL_RATE_9M_INDEX)
  119. idx += 1;
  120. if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE))
  121. return idx;
  122. /* legacy rate format, search for match in table */
  123. } else {
  124. for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
  125. if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
  126. return idx;
  127. }
  128. return -1;
  129. }
  130. EXPORT_SYMBOL(iwl_hwrate_to_plcp_idx);
  131. u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant)
  132. {
  133. int i;
  134. u8 ind = ant;
  135. for (i = 0; i < RATE_ANT_NUM - 1; i++) {
  136. ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0;
  137. if (priv->hw_params.valid_tx_ant & BIT(ind))
  138. return ind;
  139. }
  140. return ant;
  141. }
  142. const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
  143. EXPORT_SYMBOL(iwl_bcast_addr);
  144. /* This function both allocates and initializes hw and priv. */
  145. struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
  146. struct ieee80211_ops *hw_ops)
  147. {
  148. struct iwl_priv *priv;
  149. /* mac80211 allocates memory for this device instance, including
  150. * space for this driver's private structure */
  151. struct ieee80211_hw *hw =
  152. ieee80211_alloc_hw(sizeof(struct iwl_priv), hw_ops);
  153. if (hw == NULL) {
  154. printk(KERN_ERR "%s: Can not allocate network device\n",
  155. cfg->name);
  156. goto out;
  157. }
  158. priv = hw->priv;
  159. priv->hw = hw;
  160. out:
  161. return hw;
  162. }
  163. EXPORT_SYMBOL(iwl_alloc_all);
  164. void iwl_hw_detect(struct iwl_priv *priv)
  165. {
  166. priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
  167. priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
  168. pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
  169. }
  170. EXPORT_SYMBOL(iwl_hw_detect);
  171. int iwl_hw_nic_init(struct iwl_priv *priv)
  172. {
  173. unsigned long flags;
  174. struct iwl_rx_queue *rxq = &priv->rxq;
  175. int ret;
  176. /* nic_init */
  177. spin_lock_irqsave(&priv->lock, flags);
  178. priv->cfg->ops->lib->apm_ops.init(priv);
  179. iwl_write32(priv, CSR_INT_COALESCING, 512 / 32);
  180. spin_unlock_irqrestore(&priv->lock, flags);
  181. ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
  182. priv->cfg->ops->lib->apm_ops.config(priv);
  183. /* Allocate the RX queue, or reset if it is already allocated */
  184. if (!rxq->bd) {
  185. ret = iwl_rx_queue_alloc(priv);
  186. if (ret) {
  187. IWL_ERR(priv, "Unable to initialize Rx queue\n");
  188. return -ENOMEM;
  189. }
  190. } else
  191. iwl_rx_queue_reset(priv, rxq);
  192. iwl_rx_replenish(priv);
  193. iwl_rx_init(priv, rxq);
  194. spin_lock_irqsave(&priv->lock, flags);
  195. rxq->need_update = 1;
  196. iwl_rx_queue_update_write_ptr(priv, rxq);
  197. spin_unlock_irqrestore(&priv->lock, flags);
  198. /* Allocate and init all Tx and Command queues */
  199. ret = iwl_txq_ctx_reset(priv);
  200. if (ret)
  201. return ret;
  202. set_bit(STATUS_INIT, &priv->status);
  203. return 0;
  204. }
  205. EXPORT_SYMBOL(iwl_hw_nic_init);
  206. void iwl_reset_qos(struct iwl_priv *priv)
  207. {
  208. u16 cw_min = 15;
  209. u16 cw_max = 1023;
  210. u8 aifs = 2;
  211. bool is_legacy = false;
  212. unsigned long flags;
  213. int i;
  214. spin_lock_irqsave(&priv->lock, flags);
  215. /* QoS always active in AP and ADHOC mode
  216. * In STA mode wait for association
  217. */
  218. if (priv->iw_mode == NL80211_IFTYPE_ADHOC ||
  219. priv->iw_mode == NL80211_IFTYPE_AP)
  220. priv->qos_data.qos_active = 1;
  221. else
  222. priv->qos_data.qos_active = 0;
  223. /* check for legacy mode */
  224. if ((priv->iw_mode == NL80211_IFTYPE_ADHOC &&
  225. (priv->active_rate & IWL_OFDM_RATES_MASK) == 0) ||
  226. (priv->iw_mode == NL80211_IFTYPE_STATION &&
  227. (priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK) == 0)) {
  228. cw_min = 31;
  229. is_legacy = 1;
  230. }
  231. if (priv->qos_data.qos_active)
  232. aifs = 3;
  233. priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
  234. priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
  235. priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
  236. priv->qos_data.def_qos_parm.ac[0].edca_txop = 0;
  237. priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
  238. if (priv->qos_data.qos_active) {
  239. i = 1;
  240. priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
  241. priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
  242. priv->qos_data.def_qos_parm.ac[i].aifsn = 7;
  243. priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
  244. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  245. i = 2;
  246. priv->qos_data.def_qos_parm.ac[i].cw_min =
  247. cpu_to_le16((cw_min + 1) / 2 - 1);
  248. priv->qos_data.def_qos_parm.ac[i].cw_max =
  249. cpu_to_le16(cw_max);
  250. priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
  251. if (is_legacy)
  252. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  253. cpu_to_le16(6016);
  254. else
  255. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  256. cpu_to_le16(3008);
  257. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  258. i = 3;
  259. priv->qos_data.def_qos_parm.ac[i].cw_min =
  260. cpu_to_le16((cw_min + 1) / 4 - 1);
  261. priv->qos_data.def_qos_parm.ac[i].cw_max =
  262. cpu_to_le16((cw_max + 1) / 2 - 1);
  263. priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
  264. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  265. if (is_legacy)
  266. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  267. cpu_to_le16(3264);
  268. else
  269. priv->qos_data.def_qos_parm.ac[i].edca_txop =
  270. cpu_to_le16(1504);
  271. } else {
  272. for (i = 1; i < 4; i++) {
  273. priv->qos_data.def_qos_parm.ac[i].cw_min =
  274. cpu_to_le16(cw_min);
  275. priv->qos_data.def_qos_parm.ac[i].cw_max =
  276. cpu_to_le16(cw_max);
  277. priv->qos_data.def_qos_parm.ac[i].aifsn = aifs;
  278. priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
  279. priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
  280. }
  281. }
  282. IWL_DEBUG_QOS("set QoS to default \n");
  283. spin_unlock_irqrestore(&priv->lock, flags);
  284. }
  285. EXPORT_SYMBOL(iwl_reset_qos);
  286. #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
  287. #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
  288. static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
  289. struct ieee80211_sta_ht_cap *ht_info,
  290. enum ieee80211_band band)
  291. {
  292. u16 max_bit_rate = 0;
  293. u8 rx_chains_num = priv->hw_params.rx_chains_num;
  294. u8 tx_chains_num = priv->hw_params.tx_chains_num;
  295. ht_info->cap = 0;
  296. memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
  297. ht_info->ht_supported = true;
  298. ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
  299. ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
  300. ht_info->cap |= (IEEE80211_HT_CAP_SM_PS &
  301. (WLAN_HT_CAP_SM_PS_DISABLED << 2));
  302. max_bit_rate = MAX_BIT_RATE_20_MHZ;
  303. if (priv->hw_params.fat_channel & BIT(band)) {
  304. ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
  305. ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
  306. ht_info->mcs.rx_mask[4] = 0x01;
  307. max_bit_rate = MAX_BIT_RATE_40_MHZ;
  308. }
  309. if (priv->cfg->mod_params->amsdu_size_8K)
  310. ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
  311. ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
  312. ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
  313. ht_info->mcs.rx_mask[0] = 0xFF;
  314. if (rx_chains_num >= 2)
  315. ht_info->mcs.rx_mask[1] = 0xFF;
  316. if (rx_chains_num >= 3)
  317. ht_info->mcs.rx_mask[2] = 0xFF;
  318. /* Highest supported Rx data rate */
  319. max_bit_rate *= rx_chains_num;
  320. WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK);
  321. ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate);
  322. /* Tx MCS capabilities */
  323. ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
  324. if (tx_chains_num != rx_chains_num) {
  325. ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
  326. ht_info->mcs.tx_params |= ((tx_chains_num - 1) <<
  327. IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
  328. }
  329. }
  330. static void iwlcore_init_hw_rates(struct iwl_priv *priv,
  331. struct ieee80211_rate *rates)
  332. {
  333. int i;
  334. for (i = 0; i < IWL_RATE_COUNT; i++) {
  335. rates[i].bitrate = iwl_rates[i].ieee * 5;
  336. rates[i].hw_value = i; /* Rate scaling will work on indexes */
  337. rates[i].hw_value_short = i;
  338. rates[i].flags = 0;
  339. if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
  340. /*
  341. * If CCK != 1M then set short preamble rate flag.
  342. */
  343. rates[i].flags |=
  344. (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
  345. 0 : IEEE80211_RATE_SHORT_PREAMBLE;
  346. }
  347. }
  348. }
  349. /**
  350. * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
  351. */
  352. static int iwlcore_init_geos(struct iwl_priv *priv)
  353. {
  354. struct iwl_channel_info *ch;
  355. struct ieee80211_supported_band *sband;
  356. struct ieee80211_channel *channels;
  357. struct ieee80211_channel *geo_ch;
  358. struct ieee80211_rate *rates;
  359. int i = 0;
  360. if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
  361. priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
  362. IWL_DEBUG_INFO("Geography modes already initialized.\n");
  363. set_bit(STATUS_GEO_CONFIGURED, &priv->status);
  364. return 0;
  365. }
  366. channels = kzalloc(sizeof(struct ieee80211_channel) *
  367. priv->channel_count, GFP_KERNEL);
  368. if (!channels)
  369. return -ENOMEM;
  370. rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
  371. GFP_KERNEL);
  372. if (!rates) {
  373. kfree(channels);
  374. return -ENOMEM;
  375. }
  376. /* 5.2GHz channels start after the 2.4GHz channels */
  377. sband = &priv->bands[IEEE80211_BAND_5GHZ];
  378. sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
  379. /* just OFDM */
  380. sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
  381. sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
  382. if (priv->cfg->sku & IWL_SKU_N)
  383. iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
  384. IEEE80211_BAND_5GHZ);
  385. sband = &priv->bands[IEEE80211_BAND_2GHZ];
  386. sband->channels = channels;
  387. /* OFDM & CCK */
  388. sband->bitrates = rates;
  389. sband->n_bitrates = IWL_RATE_COUNT;
  390. if (priv->cfg->sku & IWL_SKU_N)
  391. iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
  392. IEEE80211_BAND_2GHZ);
  393. priv->ieee_channels = channels;
  394. priv->ieee_rates = rates;
  395. iwlcore_init_hw_rates(priv, rates);
  396. for (i = 0; i < priv->channel_count; i++) {
  397. ch = &priv->channel_info[i];
  398. /* FIXME: might be removed if scan is OK */
  399. if (!is_channel_valid(ch))
  400. continue;
  401. if (is_channel_a_band(ch))
  402. sband = &priv->bands[IEEE80211_BAND_5GHZ];
  403. else
  404. sband = &priv->bands[IEEE80211_BAND_2GHZ];
  405. geo_ch = &sband->channels[sband->n_channels++];
  406. geo_ch->center_freq =
  407. ieee80211_channel_to_frequency(ch->channel);
  408. geo_ch->max_power = ch->max_power_avg;
  409. geo_ch->max_antenna_gain = 0xff;
  410. geo_ch->hw_value = ch->channel;
  411. if (is_channel_valid(ch)) {
  412. if (!(ch->flags & EEPROM_CHANNEL_IBSS))
  413. geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
  414. if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
  415. geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
  416. if (ch->flags & EEPROM_CHANNEL_RADAR)
  417. geo_ch->flags |= IEEE80211_CHAN_RADAR;
  418. geo_ch->flags |= ch->fat_extension_channel;
  419. if (ch->max_power_avg > priv->tx_power_channel_lmt)
  420. priv->tx_power_channel_lmt = ch->max_power_avg;
  421. } else {
  422. geo_ch->flags |= IEEE80211_CHAN_DISABLED;
  423. }
  424. /* Save flags for reg domain usage */
  425. geo_ch->orig_flags = geo_ch->flags;
  426. IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
  427. ch->channel, geo_ch->center_freq,
  428. is_channel_a_band(ch) ? "5.2" : "2.4",
  429. geo_ch->flags & IEEE80211_CHAN_DISABLED ?
  430. "restricted" : "valid",
  431. geo_ch->flags);
  432. }
  433. if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
  434. priv->cfg->sku & IWL_SKU_A) {
  435. IWL_INFO(priv, "Incorrectly detected BG card as ABG. "
  436. "Please send your PCI ID 0x%04X:0x%04X to maintainer.\n",
  437. priv->pci_dev->device,
  438. priv->pci_dev->subsystem_device);
  439. priv->cfg->sku &= ~IWL_SKU_A;
  440. }
  441. IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n",
  442. priv->bands[IEEE80211_BAND_2GHZ].n_channels,
  443. priv->bands[IEEE80211_BAND_5GHZ].n_channels);
  444. set_bit(STATUS_GEO_CONFIGURED, &priv->status);
  445. return 0;
  446. }
  447. /*
  448. * iwlcore_free_geos - undo allocations in iwlcore_init_geos
  449. */
  450. static void iwlcore_free_geos(struct iwl_priv *priv)
  451. {
  452. kfree(priv->ieee_channels);
  453. kfree(priv->ieee_rates);
  454. clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
  455. }
  456. static bool is_single_rx_stream(struct iwl_priv *priv)
  457. {
  458. return !priv->current_ht_config.is_ht ||
  459. ((priv->current_ht_config.mcs.rx_mask[1] == 0) &&
  460. (priv->current_ht_config.mcs.rx_mask[2] == 0));
  461. }
  462. static u8 iwl_is_channel_extension(struct iwl_priv *priv,
  463. enum ieee80211_band band,
  464. u16 channel, u8 extension_chan_offset)
  465. {
  466. const struct iwl_channel_info *ch_info;
  467. ch_info = iwl_get_channel_info(priv, band, channel);
  468. if (!is_channel_valid(ch_info))
  469. return 0;
  470. if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
  471. return !(ch_info->fat_extension_channel &
  472. IEEE80211_CHAN_NO_FAT_ABOVE);
  473. else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
  474. return !(ch_info->fat_extension_channel &
  475. IEEE80211_CHAN_NO_FAT_BELOW);
  476. return 0;
  477. }
  478. u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
  479. struct ieee80211_sta_ht_cap *sta_ht_inf)
  480. {
  481. struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
  482. if ((!iwl_ht_conf->is_ht) ||
  483. (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
  484. (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE))
  485. return 0;
  486. if (sta_ht_inf) {
  487. if ((!sta_ht_inf->ht_supported) ||
  488. (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)))
  489. return 0;
  490. }
  491. return iwl_is_channel_extension(priv, priv->band,
  492. le16_to_cpu(priv->staging_rxon.channel),
  493. iwl_ht_conf->extension_chan_offset);
  494. }
  495. EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
  496. void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
  497. {
  498. struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
  499. u32 val;
  500. if (!ht_info->is_ht) {
  501. rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
  502. RXON_FLG_CHANNEL_MODE_PURE_40_MSK |
  503. RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
  504. RXON_FLG_FAT_PROT_MSK |
  505. RXON_FLG_HT_PROT_MSK);
  506. return;
  507. }
  508. /* Set up channel bandwidth: 20 MHz only, or 20/40 mixed if fat ok */
  509. if (iwl_is_fat_tx_allowed(priv, NULL))
  510. rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK;
  511. else
  512. rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
  513. RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
  514. /* Note: control channel is opposite of extension channel */
  515. switch (ht_info->extension_chan_offset) {
  516. case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
  517. rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
  518. break;
  519. case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
  520. rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
  521. break;
  522. case IEEE80211_HT_PARAM_CHA_SEC_NONE:
  523. default:
  524. rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
  525. break;
  526. }
  527. val = ht_info->ht_protection;
  528. rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
  529. iwl_set_rxon_chain(priv);
  530. IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X "
  531. "rxon flags 0x%X operation mode :0x%X "
  532. "extension channel offset 0x%x\n",
  533. ht_info->mcs.rx_mask[0],
  534. ht_info->mcs.rx_mask[1],
  535. ht_info->mcs.rx_mask[2],
  536. le32_to_cpu(rxon->flags), ht_info->ht_protection,
  537. ht_info->extension_chan_offset);
  538. return;
  539. }
  540. EXPORT_SYMBOL(iwl_set_rxon_ht);
  541. #define IWL_NUM_RX_CHAINS_MULTIPLE 3
  542. #define IWL_NUM_RX_CHAINS_SINGLE 2
  543. #define IWL_NUM_IDLE_CHAINS_DUAL 2
  544. #define IWL_NUM_IDLE_CHAINS_SINGLE 1
  545. /* Determine how many receiver/antenna chains to use.
  546. * More provides better reception via diversity. Fewer saves power.
  547. * MIMO (dual stream) requires at least 2, but works better with 3.
  548. * This does not determine *which* chains to use, just how many.
  549. */
  550. static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
  551. {
  552. bool is_single = is_single_rx_stream(priv);
  553. bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
  554. /* # of Rx chains to use when expecting MIMO. */
  555. if (is_single || (!is_cam && (priv->current_ht_config.sm_ps ==
  556. WLAN_HT_CAP_SM_PS_STATIC)))
  557. return IWL_NUM_RX_CHAINS_SINGLE;
  558. else
  559. return IWL_NUM_RX_CHAINS_MULTIPLE;
  560. }
  561. static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
  562. {
  563. int idle_cnt;
  564. bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
  565. /* # Rx chains when idling and maybe trying to save power */
  566. switch (priv->current_ht_config.sm_ps) {
  567. case WLAN_HT_CAP_SM_PS_STATIC:
  568. case WLAN_HT_CAP_SM_PS_DYNAMIC:
  569. idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL :
  570. IWL_NUM_IDLE_CHAINS_SINGLE;
  571. break;
  572. case WLAN_HT_CAP_SM_PS_DISABLED:
  573. idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE;
  574. break;
  575. case WLAN_HT_CAP_SM_PS_INVALID:
  576. default:
  577. IWL_ERR(priv, "invalid mimo ps mode %d\n",
  578. priv->current_ht_config.sm_ps);
  579. WARN_ON(1);
  580. idle_cnt = -1;
  581. break;
  582. }
  583. return idle_cnt;
  584. }
  585. /* up to 4 chains */
  586. static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
  587. {
  588. u8 res;
  589. res = (chain_bitmap & BIT(0)) >> 0;
  590. res += (chain_bitmap & BIT(1)) >> 1;
  591. res += (chain_bitmap & BIT(2)) >> 2;
  592. res += (chain_bitmap & BIT(4)) >> 4;
  593. return res;
  594. }
  595. /**
  596. * iwl_is_monitor_mode - Determine if interface in monitor mode
  597. *
  598. * priv->iw_mode is set in add_interface, but add_interface is
  599. * never called for monitor mode. The only way mac80211 informs us about
  600. * monitor mode is through configuring filters (call to configure_filter).
  601. */
  602. static bool iwl_is_monitor_mode(struct iwl_priv *priv)
  603. {
  604. return !!(priv->staging_rxon.filter_flags & RXON_FILTER_PROMISC_MSK);
  605. }
  606. /**
  607. * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
  608. *
  609. * Selects how many and which Rx receivers/antennas/chains to use.
  610. * This should not be used for scan command ... it puts data in wrong place.
  611. */
  612. void iwl_set_rxon_chain(struct iwl_priv *priv)
  613. {
  614. bool is_single = is_single_rx_stream(priv);
  615. bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
  616. u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
  617. u32 active_chains;
  618. u16 rx_chain;
  619. /* Tell uCode which antennas are actually connected.
  620. * Before first association, we assume all antennas are connected.
  621. * Just after first association, iwl_chain_noise_calibration()
  622. * checks which antennas actually *are* connected. */
  623. if (priv->chain_noise_data.active_chains)
  624. active_chains = priv->chain_noise_data.active_chains;
  625. else
  626. active_chains = priv->hw_params.valid_rx_ant;
  627. rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
  628. /* How many receivers should we use? */
  629. active_rx_cnt = iwl_get_active_rx_chain_count(priv);
  630. idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
  631. /* correct rx chain count according hw settings
  632. * and chain noise calibration
  633. */
  634. valid_rx_cnt = iwl_count_chain_bitmap(active_chains);
  635. if (valid_rx_cnt < active_rx_cnt)
  636. active_rx_cnt = valid_rx_cnt;
  637. if (valid_rx_cnt < idle_rx_cnt)
  638. idle_rx_cnt = valid_rx_cnt;
  639. rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
  640. rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
  641. priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
  642. if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
  643. priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
  644. else
  645. priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
  646. IWL_DEBUG_ASSOC("rx_chain=0x%X active=%d idle=%d\n",
  647. priv->staging_rxon.rx_chain,
  648. active_rx_cnt, idle_rx_cnt);
  649. WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
  650. active_rx_cnt < idle_rx_cnt);
  651. }
  652. EXPORT_SYMBOL(iwl_set_rxon_chain);
  653. /**
  654. * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
  655. * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
  656. * @channel: Any channel valid for the requested phymode
  657. * In addition to setting the staging RXON, priv->phymode is also set.
  658. *
  659. * NOTE: Does not commit to the hardware; it sets appropriate bit fields
  660. * in the staging RXON flag structure based on the phymode
  661. */
  662. int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch)
  663. {
  664. enum ieee80211_band band = ch->band;
  665. u16 channel = ieee80211_frequency_to_channel(ch->center_freq);
  666. if (!iwl_get_channel_info(priv, band, channel)) {
  667. IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
  668. channel, band);
  669. return -EINVAL;
  670. }
  671. if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
  672. (priv->band == band))
  673. return 0;
  674. priv->staging_rxon.channel = cpu_to_le16(channel);
  675. if (band == IEEE80211_BAND_5GHZ)
  676. priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
  677. else
  678. priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
  679. priv->band = band;
  680. IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
  681. return 0;
  682. }
  683. EXPORT_SYMBOL(iwl_set_rxon_channel);
  684. int iwl_setup_mac(struct iwl_priv *priv)
  685. {
  686. int ret;
  687. struct ieee80211_hw *hw = priv->hw;
  688. hw->rate_control_algorithm = "iwl-agn-rs";
  689. /* Tell mac80211 our characteristics */
  690. hw->flags = IEEE80211_HW_SIGNAL_DBM |
  691. IEEE80211_HW_NOISE_DBM |
  692. IEEE80211_HW_AMPDU_AGGREGATION |
  693. IEEE80211_HW_SUPPORTS_PS;
  694. hw->wiphy->interface_modes =
  695. BIT(NL80211_IFTYPE_STATION) |
  696. BIT(NL80211_IFTYPE_ADHOC);
  697. hw->wiphy->custom_regulatory = true;
  698. /* Default value; 4 EDCA QOS priorities */
  699. hw->queues = 4;
  700. /* queues to support 11n aggregation */
  701. if (priv->cfg->sku & IWL_SKU_N)
  702. hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues;
  703. hw->conf.beacon_int = 100;
  704. hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
  705. if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
  706. priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
  707. &priv->bands[IEEE80211_BAND_2GHZ];
  708. if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
  709. priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
  710. &priv->bands[IEEE80211_BAND_5GHZ];
  711. ret = ieee80211_register_hw(priv->hw);
  712. if (ret) {
  713. IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
  714. return ret;
  715. }
  716. priv->mac80211_registered = 1;
  717. return 0;
  718. }
  719. EXPORT_SYMBOL(iwl_setup_mac);
  720. int iwl_set_hw_params(struct iwl_priv *priv)
  721. {
  722. priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto;
  723. priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
  724. priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
  725. if (priv->cfg->mod_params->amsdu_size_8K)
  726. priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K;
  727. else
  728. priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K;
  729. priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256;
  730. if (priv->cfg->mod_params->disable_11n)
  731. priv->cfg->sku &= ~IWL_SKU_N;
  732. /* Device-specific setup */
  733. return priv->cfg->ops->lib->set_hw_params(priv);
  734. }
  735. EXPORT_SYMBOL(iwl_set_hw_params);
  736. int iwl_init_drv(struct iwl_priv *priv)
  737. {
  738. int ret;
  739. priv->ibss_beacon = NULL;
  740. spin_lock_init(&priv->lock);
  741. spin_lock_init(&priv->power_data.lock);
  742. spin_lock_init(&priv->sta_lock);
  743. spin_lock_init(&priv->hcmd_lock);
  744. INIT_LIST_HEAD(&priv->free_frames);
  745. mutex_init(&priv->mutex);
  746. /* Clear the driver's (not device's) station table */
  747. iwl_clear_stations_table(priv);
  748. priv->data_retry_limit = -1;
  749. priv->ieee_channels = NULL;
  750. priv->ieee_rates = NULL;
  751. priv->band = IEEE80211_BAND_2GHZ;
  752. priv->iw_mode = NL80211_IFTYPE_STATION;
  753. priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED;
  754. /* Choose which receivers/antennas to use */
  755. iwl_set_rxon_chain(priv);
  756. iwl_init_scan_params(priv);
  757. iwl_reset_qos(priv);
  758. priv->qos_data.qos_active = 0;
  759. priv->qos_data.qos_cap.val = 0;
  760. priv->rates_mask = IWL_RATES_MASK;
  761. /* If power management is turned on, default to AC mode */
  762. priv->power_mode = IWL_POWER_AC;
  763. priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MAX;
  764. ret = iwl_init_channel_map(priv);
  765. if (ret) {
  766. IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
  767. goto err;
  768. }
  769. ret = iwlcore_init_geos(priv);
  770. if (ret) {
  771. IWL_ERR(priv, "initializing geos failed: %d\n", ret);
  772. goto err_free_channel_map;
  773. }
  774. return 0;
  775. err_free_channel_map:
  776. iwl_free_channel_map(priv);
  777. err:
  778. return ret;
  779. }
  780. EXPORT_SYMBOL(iwl_init_drv);
  781. int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
  782. {
  783. int ret = 0;
  784. if (tx_power < IWL_TX_POWER_TARGET_POWER_MIN) {
  785. IWL_WARN(priv, "Requested user TXPOWER %d below limit.\n",
  786. priv->tx_power_user_lmt);
  787. return -EINVAL;
  788. }
  789. if (tx_power > IWL_TX_POWER_TARGET_POWER_MAX) {
  790. IWL_WARN(priv, "Requested user TXPOWER %d above limit.\n",
  791. priv->tx_power_user_lmt);
  792. return -EINVAL;
  793. }
  794. if (priv->tx_power_user_lmt != tx_power)
  795. force = true;
  796. priv->tx_power_user_lmt = tx_power;
  797. if (force && priv->cfg->ops->lib->send_tx_power)
  798. ret = priv->cfg->ops->lib->send_tx_power(priv);
  799. return ret;
  800. }
  801. EXPORT_SYMBOL(iwl_set_tx_power);
  802. void iwl_uninit_drv(struct iwl_priv *priv)
  803. {
  804. iwl_calib_free_results(priv);
  805. iwlcore_free_geos(priv);
  806. iwl_free_channel_map(priv);
  807. kfree(priv->scan);
  808. }
  809. EXPORT_SYMBOL(iwl_uninit_drv);
  810. void iwl_disable_interrupts(struct iwl_priv *priv)
  811. {
  812. clear_bit(STATUS_INT_ENABLED, &priv->status);
  813. /* disable interrupts from uCode/NIC to host */
  814. iwl_write32(priv, CSR_INT_MASK, 0x00000000);
  815. /* acknowledge/clear/reset any interrupts still pending
  816. * from uCode or flow handler (Rx/Tx DMA) */
  817. iwl_write32(priv, CSR_INT, 0xffffffff);
  818. iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
  819. IWL_DEBUG_ISR("Disabled interrupts\n");
  820. }
  821. EXPORT_SYMBOL(iwl_disable_interrupts);
  822. void iwl_enable_interrupts(struct iwl_priv *priv)
  823. {
  824. IWL_DEBUG_ISR("Enabling interrupts\n");
  825. set_bit(STATUS_INT_ENABLED, &priv->status);
  826. iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
  827. }
  828. EXPORT_SYMBOL(iwl_enable_interrupts);
  829. int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags)
  830. {
  831. u32 stat_flags = 0;
  832. struct iwl_host_cmd cmd = {
  833. .id = REPLY_STATISTICS_CMD,
  834. .meta.flags = flags,
  835. .len = sizeof(stat_flags),
  836. .data = (u8 *) &stat_flags,
  837. };
  838. return iwl_send_cmd(priv, &cmd);
  839. }
  840. EXPORT_SYMBOL(iwl_send_statistics_request);
  841. /**
  842. * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
  843. * using sample data 100 bytes apart. If these sample points are good,
  844. * it's a pretty good bet that everything between them is good, too.
  845. */
  846. static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
  847. {
  848. u32 val;
  849. int ret = 0;
  850. u32 errcnt = 0;
  851. u32 i;
  852. IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
  853. ret = iwl_grab_nic_access(priv);
  854. if (ret)
  855. return ret;
  856. for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
  857. /* read data comes through single port, auto-incr addr */
  858. /* NOTE: Use the debugless read so we don't flood kernel log
  859. * if IWL_DL_IO is set */
  860. iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
  861. i + IWL49_RTC_INST_LOWER_BOUND);
  862. val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
  863. if (val != le32_to_cpu(*image)) {
  864. ret = -EIO;
  865. errcnt++;
  866. if (errcnt >= 3)
  867. break;
  868. }
  869. }
  870. iwl_release_nic_access(priv);
  871. return ret;
  872. }
  873. /**
  874. * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host,
  875. * looking at all data.
  876. */
  877. static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
  878. u32 len)
  879. {
  880. u32 val;
  881. u32 save_len = len;
  882. int ret = 0;
  883. u32 errcnt;
  884. IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
  885. ret = iwl_grab_nic_access(priv);
  886. if (ret)
  887. return ret;
  888. iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
  889. IWL49_RTC_INST_LOWER_BOUND);
  890. errcnt = 0;
  891. for (; len > 0; len -= sizeof(u32), image++) {
  892. /* read data comes through single port, auto-incr addr */
  893. /* NOTE: Use the debugless read so we don't flood kernel log
  894. * if IWL_DL_IO is set */
  895. val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
  896. if (val != le32_to_cpu(*image)) {
  897. IWL_ERR(priv, "uCode INST section is invalid at "
  898. "offset 0x%x, is 0x%x, s/b 0x%x\n",
  899. save_len - len, val, le32_to_cpu(*image));
  900. ret = -EIO;
  901. errcnt++;
  902. if (errcnt >= 20)
  903. break;
  904. }
  905. }
  906. iwl_release_nic_access(priv);
  907. if (!errcnt)
  908. IWL_DEBUG_INFO
  909. ("ucode image in INSTRUCTION memory is good\n");
  910. return ret;
  911. }
  912. /**
  913. * iwl_verify_ucode - determine which instruction image is in SRAM,
  914. * and verify its contents
  915. */
  916. int iwl_verify_ucode(struct iwl_priv *priv)
  917. {
  918. __le32 *image;
  919. u32 len;
  920. int ret;
  921. /* Try bootstrap */
  922. image = (__le32 *)priv->ucode_boot.v_addr;
  923. len = priv->ucode_boot.len;
  924. ret = iwlcore_verify_inst_sparse(priv, image, len);
  925. if (!ret) {
  926. IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
  927. return 0;
  928. }
  929. /* Try initialize */
  930. image = (__le32 *)priv->ucode_init.v_addr;
  931. len = priv->ucode_init.len;
  932. ret = iwlcore_verify_inst_sparse(priv, image, len);
  933. if (!ret) {
  934. IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
  935. return 0;
  936. }
  937. /* Try runtime/protocol */
  938. image = (__le32 *)priv->ucode_code.v_addr;
  939. len = priv->ucode_code.len;
  940. ret = iwlcore_verify_inst_sparse(priv, image, len);
  941. if (!ret) {
  942. IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
  943. return 0;
  944. }
  945. IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
  946. /* Since nothing seems to match, show first several data entries in
  947. * instruction SRAM, so maybe visual inspection will give a clue.
  948. * Selection of bootstrap image (vs. other images) is arbitrary. */
  949. image = (__le32 *)priv->ucode_boot.v_addr;
  950. len = priv->ucode_boot.len;
  951. ret = iwl_verify_inst_full(priv, image, len);
  952. return ret;
  953. }
  954. EXPORT_SYMBOL(iwl_verify_ucode);
  955. static const char *desc_lookup_text[] = {
  956. "OK",
  957. "FAIL",
  958. "BAD_PARAM",
  959. "BAD_CHECKSUM",
  960. "NMI_INTERRUPT_WDG",
  961. "SYSASSERT",
  962. "FATAL_ERROR",
  963. "BAD_COMMAND",
  964. "HW_ERROR_TUNE_LOCK",
  965. "HW_ERROR_TEMPERATURE",
  966. "ILLEGAL_CHAN_FREQ",
  967. "VCC_NOT_STABLE",
  968. "FH_ERROR",
  969. "NMI_INTERRUPT_HOST",
  970. "NMI_INTERRUPT_ACTION_PT",
  971. "NMI_INTERRUPT_UNKNOWN",
  972. "UCODE_VERSION_MISMATCH",
  973. "HW_ERROR_ABS_LOCK",
  974. "HW_ERROR_CAL_LOCK_FAIL",
  975. "NMI_INTERRUPT_INST_ACTION_PT",
  976. "NMI_INTERRUPT_DATA_ACTION_PT",
  977. "NMI_TRM_HW_ER",
  978. "NMI_INTERRUPT_TRM",
  979. "NMI_INTERRUPT_BREAK_POINT"
  980. "DEBUG_0",
  981. "DEBUG_1",
  982. "DEBUG_2",
  983. "DEBUG_3",
  984. "UNKNOWN"
  985. };
  986. static const char *desc_lookup(int i)
  987. {
  988. int max = ARRAY_SIZE(desc_lookup_text) - 1;
  989. if (i < 0 || i > max)
  990. i = max;
  991. return desc_lookup_text[i];
  992. }
  993. #define ERROR_START_OFFSET (1 * sizeof(u32))
  994. #define ERROR_ELEM_SIZE (7 * sizeof(u32))
  995. void iwl_dump_nic_error_log(struct iwl_priv *priv)
  996. {
  997. u32 data2, line;
  998. u32 desc, time, count, base, data1;
  999. u32 blink1, blink2, ilink1, ilink2;
  1000. int ret;
  1001. if (priv->ucode_type == UCODE_INIT)
  1002. base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
  1003. else
  1004. base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
  1005. if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
  1006. IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
  1007. return;
  1008. }
  1009. ret = iwl_grab_nic_access(priv);
  1010. if (ret) {
  1011. IWL_WARN(priv, "Can not read from adapter at this time.\n");
  1012. return;
  1013. }
  1014. count = iwl_read_targ_mem(priv, base);
  1015. if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
  1016. IWL_ERR(priv, "Start IWL Error Log Dump:\n");
  1017. IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
  1018. priv->status, count);
  1019. }
  1020. desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
  1021. blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
  1022. blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
  1023. ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
  1024. ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
  1025. data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
  1026. data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
  1027. line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
  1028. time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
  1029. IWL_ERR(priv, "Desc Time "
  1030. "data1 data2 line\n");
  1031. IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
  1032. desc_lookup(desc), desc, time, data1, data2, line);
  1033. IWL_ERR(priv, "blink1 blink2 ilink1 ilink2\n");
  1034. IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
  1035. ilink1, ilink2);
  1036. iwl_release_nic_access(priv);
  1037. }
  1038. EXPORT_SYMBOL(iwl_dump_nic_error_log);
  1039. #define EVENT_START_OFFSET (4 * sizeof(u32))
  1040. /**
  1041. * iwl_print_event_log - Dump error event log to syslog
  1042. *
  1043. * NOTE: Must be called with iwl_grab_nic_access() already obtained!
  1044. */
  1045. static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
  1046. u32 num_events, u32 mode)
  1047. {
  1048. u32 i;
  1049. u32 base; /* SRAM byte address of event log header */
  1050. u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
  1051. u32 ptr; /* SRAM byte address of log data */
  1052. u32 ev, time, data; /* event log data */
  1053. if (num_events == 0)
  1054. return;
  1055. if (priv->ucode_type == UCODE_INIT)
  1056. base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
  1057. else
  1058. base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
  1059. if (mode == 0)
  1060. event_size = 2 * sizeof(u32);
  1061. else
  1062. event_size = 3 * sizeof(u32);
  1063. ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
  1064. /* "time" is actually "data" for mode 0 (no timestamp).
  1065. * place event id # at far right for easier visual parsing. */
  1066. for (i = 0; i < num_events; i++) {
  1067. ev = iwl_read_targ_mem(priv, ptr);
  1068. ptr += sizeof(u32);
  1069. time = iwl_read_targ_mem(priv, ptr);
  1070. ptr += sizeof(u32);
  1071. if (mode == 0) {
  1072. /* data, ev */
  1073. IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
  1074. } else {
  1075. data = iwl_read_targ_mem(priv, ptr);
  1076. ptr += sizeof(u32);
  1077. IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
  1078. time, data, ev);
  1079. }
  1080. }
  1081. }
  1082. void iwl_dump_nic_event_log(struct iwl_priv *priv)
  1083. {
  1084. int ret;
  1085. u32 base; /* SRAM byte address of event log header */
  1086. u32 capacity; /* event log capacity in # entries */
  1087. u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
  1088. u32 num_wraps; /* # times uCode wrapped to top of log */
  1089. u32 next_entry; /* index of next entry to be written by uCode */
  1090. u32 size; /* # entries that we'll print */
  1091. if (priv->ucode_type == UCODE_INIT)
  1092. base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
  1093. else
  1094. base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
  1095. if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
  1096. IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
  1097. return;
  1098. }
  1099. ret = iwl_grab_nic_access(priv);
  1100. if (ret) {
  1101. IWL_WARN(priv, "Can not read from adapter at this time.\n");
  1102. return;
  1103. }
  1104. /* event log header */
  1105. capacity = iwl_read_targ_mem(priv, base);
  1106. mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
  1107. num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
  1108. next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
  1109. size = num_wraps ? capacity : next_entry;
  1110. /* bail out if nothing in log */
  1111. if (size == 0) {
  1112. IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
  1113. iwl_release_nic_access(priv);
  1114. return;
  1115. }
  1116. IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
  1117. size, num_wraps);
  1118. /* if uCode has wrapped back to top of log, start at the oldest entry,
  1119. * i.e the next one that uCode would fill. */
  1120. if (num_wraps)
  1121. iwl_print_event_log(priv, next_entry,
  1122. capacity - next_entry, mode);
  1123. /* (then/else) start at top of log */
  1124. iwl_print_event_log(priv, 0, next_entry, mode);
  1125. iwl_release_nic_access(priv);
  1126. }
  1127. EXPORT_SYMBOL(iwl_dump_nic_event_log);
  1128. void iwl_rf_kill_ct_config(struct iwl_priv *priv)
  1129. {
  1130. struct iwl_ct_kill_config cmd;
  1131. unsigned long flags;
  1132. int ret = 0;
  1133. spin_lock_irqsave(&priv->lock, flags);
  1134. iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
  1135. CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
  1136. spin_unlock_irqrestore(&priv->lock, flags);
  1137. cmd.critical_temperature_R =
  1138. cpu_to_le32(priv->hw_params.ct_kill_threshold);
  1139. ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
  1140. sizeof(cmd), &cmd);
  1141. if (ret)
  1142. IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
  1143. else
  1144. IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded, "
  1145. "critical temperature is %d\n",
  1146. cmd.critical_temperature_R);
  1147. }
  1148. EXPORT_SYMBOL(iwl_rf_kill_ct_config);
  1149. /*
  1150. * CARD_STATE_CMD
  1151. *
  1152. * Use: Sets the device's internal card state to enable, disable, or halt
  1153. *
  1154. * When in the 'enable' state the card operates as normal.
  1155. * When in the 'disable' state, the card enters into a low power mode.
  1156. * When in the 'halt' state, the card is shut down and must be fully
  1157. * restarted to come back on.
  1158. */
  1159. int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag)
  1160. {
  1161. struct iwl_host_cmd cmd = {
  1162. .id = REPLY_CARD_STATE_CMD,
  1163. .len = sizeof(u32),
  1164. .data = &flags,
  1165. .meta.flags = meta_flag,
  1166. };
  1167. return iwl_send_cmd(priv, &cmd);
  1168. }
  1169. EXPORT_SYMBOL(iwl_send_card_state);
  1170. void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv)
  1171. {
  1172. unsigned long flags;
  1173. if (test_bit(STATUS_RF_KILL_SW, &priv->status))
  1174. return;
  1175. IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO OFF\n");
  1176. iwl_scan_cancel(priv);
  1177. /* FIXME: This is a workaround for AP */
  1178. if (priv->iw_mode != NL80211_IFTYPE_AP) {
  1179. spin_lock_irqsave(&priv->lock, flags);
  1180. iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
  1181. CSR_UCODE_SW_BIT_RFKILL);
  1182. spin_unlock_irqrestore(&priv->lock, flags);
  1183. /* call the host command only if no hw rf-kill set */
  1184. if (!test_bit(STATUS_RF_KILL_HW, &priv->status) &&
  1185. iwl_is_ready(priv))
  1186. iwl_send_card_state(priv,
  1187. CARD_STATE_CMD_DISABLE, 0);
  1188. set_bit(STATUS_RF_KILL_SW, &priv->status);
  1189. /* make sure mac80211 stop sending Tx frame */
  1190. if (priv->mac80211_registered)
  1191. ieee80211_stop_queues(priv->hw);
  1192. }
  1193. }
  1194. EXPORT_SYMBOL(iwl_radio_kill_sw_disable_radio);
  1195. int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv)
  1196. {
  1197. unsigned long flags;
  1198. if (!test_bit(STATUS_RF_KILL_SW, &priv->status))
  1199. return 0;
  1200. IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO ON\n");
  1201. spin_lock_irqsave(&priv->lock, flags);
  1202. iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
  1203. /* If the driver is up it will receive CARD_STATE_NOTIFICATION
  1204. * notification where it will clear SW rfkill status.
  1205. * Setting it here would break the handler. Only if the
  1206. * interface is down we can set here since we don't
  1207. * receive any further notification.
  1208. */
  1209. if (!priv->is_open)
  1210. clear_bit(STATUS_RF_KILL_SW, &priv->status);
  1211. spin_unlock_irqrestore(&priv->lock, flags);
  1212. /* wake up ucode */
  1213. msleep(10);
  1214. spin_lock_irqsave(&priv->lock, flags);
  1215. iwl_read32(priv, CSR_UCODE_DRV_GP1);
  1216. if (!iwl_grab_nic_access(priv))
  1217. iwl_release_nic_access(priv);
  1218. spin_unlock_irqrestore(&priv->lock, flags);
  1219. if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
  1220. IWL_DEBUG_RF_KILL("Can not turn radio back on - "
  1221. "disabled by HW switch\n");
  1222. return 0;
  1223. }
  1224. /* when driver is up while rfkill is on, it wont receive
  1225. * any CARD_STATE_NOTIFICATION notifications so we have to
  1226. * restart it in here
  1227. */
  1228. if (priv->is_open && !test_bit(STATUS_ALIVE, &priv->status)) {
  1229. clear_bit(STATUS_RF_KILL_SW, &priv->status);
  1230. if (!iwl_is_rfkill(priv))
  1231. queue_work(priv->workqueue, &priv->up);
  1232. }
  1233. /* If the driver is already loaded, it will receive
  1234. * CARD_STATE_NOTIFICATION notifications and the handler will
  1235. * call restart to reload the driver.
  1236. */
  1237. return 1;
  1238. }
  1239. EXPORT_SYMBOL(iwl_radio_kill_sw_enable_radio);
  1240. void iwl_bg_rf_kill(struct work_struct *work)
  1241. {
  1242. struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill);
  1243. wake_up_interruptible(&priv->wait_command_queue);
  1244. if (test_bit(STATUS_EXIT_PENDING, &priv->status))
  1245. return;
  1246. mutex_lock(&priv->mutex);
  1247. if (!iwl_is_rfkill(priv)) {
  1248. IWL_DEBUG(IWL_DL_RF_KILL,
  1249. "HW and/or SW RF Kill no longer active, restarting "
  1250. "device\n");
  1251. if (!test_bit(STATUS_EXIT_PENDING, &priv->status) &&
  1252. test_bit(STATUS_ALIVE, &priv->status))
  1253. queue_work(priv->workqueue, &priv->restart);
  1254. } else {
  1255. /* make sure mac80211 stop sending Tx frame */
  1256. if (priv->mac80211_registered)
  1257. ieee80211_stop_queues(priv->hw);
  1258. if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
  1259. IWL_DEBUG_RF_KILL("Can not turn radio back on - "
  1260. "disabled by SW switch\n");
  1261. else
  1262. IWL_WARN(priv, "Radio Frequency Kill Switch is On:\n"
  1263. "Kill switch must be turned off for "
  1264. "wireless networking to work.\n");
  1265. }
  1266. mutex_unlock(&priv->mutex);
  1267. iwl_rfkill_set_hw_state(priv);
  1268. }
  1269. EXPORT_SYMBOL(iwl_bg_rf_kill);