mpc85xx_mds.c 4.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211
  1. /*
  2. * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved.
  3. *
  4. * Author: Andy Fleming <afleming@freescale.com>
  5. *
  6. * Based on 83xx/mpc8360e_pb.c by:
  7. * Li Yang <LeoLi@freescale.com>
  8. * Yin Olivia <Hong-hua.Yin@freescale.com>
  9. *
  10. * Description:
  11. * MPC85xx MDS board specific routines.
  12. *
  13. * This program is free software; you can redistribute it and/or modify it
  14. * under the terms of the GNU General Public License as published by the
  15. * Free Software Foundation; either version 2 of the License, or (at your
  16. * option) any later version.
  17. */
  18. #include <linux/stddef.h>
  19. #include <linux/kernel.h>
  20. #include <linux/init.h>
  21. #include <linux/errno.h>
  22. #include <linux/reboot.h>
  23. #include <linux/pci.h>
  24. #include <linux/kdev_t.h>
  25. #include <linux/major.h>
  26. #include <linux/console.h>
  27. #include <linux/delay.h>
  28. #include <linux/seq_file.h>
  29. #include <linux/initrd.h>
  30. #include <linux/module.h>
  31. #include <linux/fsl_devices.h>
  32. #include <asm/of_device.h>
  33. #include <asm/of_platform.h>
  34. #include <asm/system.h>
  35. #include <asm/atomic.h>
  36. #include <asm/time.h>
  37. #include <asm/io.h>
  38. #include <asm/machdep.h>
  39. #include <asm/bootinfo.h>
  40. #include <asm/pci-bridge.h>
  41. #include <asm/mpc85xx.h>
  42. #include <asm/irq.h>
  43. #include <mm/mmu_decl.h>
  44. #include <asm/prom.h>
  45. #include <asm/udbg.h>
  46. #include <sysdev/fsl_soc.h>
  47. #include <asm/qe.h>
  48. #include <asm/qe_ic.h>
  49. #include <asm/mpic.h>
  50. #include "mpc85xx.h"
  51. #undef DEBUG
  52. #ifdef DEBUG
  53. #define DBG(fmt...) udbg_printf(fmt)
  54. #else
  55. #define DBG(fmt...)
  56. #endif
  57. /* ************************************************************************
  58. *
  59. * Setup the architecture
  60. *
  61. */
  62. static void __init mpc85xx_mds_setup_arch(void)
  63. {
  64. struct device_node *np;
  65. static u8 *bcsr_regs = NULL;
  66. if (ppc_md.progress)
  67. ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
  68. np = of_find_node_by_type(NULL, "cpu");
  69. if (np != NULL) {
  70. const unsigned int *fp =
  71. of_get_property(np, "clock-frequency", NULL);
  72. if (fp != NULL)
  73. loops_per_jiffy = *fp / HZ;
  74. else
  75. loops_per_jiffy = 50000000 / HZ;
  76. of_node_put(np);
  77. }
  78. /* Map BCSR area */
  79. np = of_find_node_by_name(NULL, "bcsr");
  80. if (np != NULL) {
  81. struct resource res;
  82. of_address_to_resource(np, 0, &res);
  83. bcsr_regs = ioremap(res.start, res.end - res.start +1);
  84. of_node_put(np);
  85. }
  86. #ifdef CONFIG_PCI
  87. for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
  88. mpc85xx_add_bridge(np);
  89. }
  90. of_node_put(np);
  91. #endif
  92. #ifdef CONFIG_QUICC_ENGINE
  93. if ((np = of_find_node_by_name(NULL, "qe")) != NULL) {
  94. qe_reset();
  95. of_node_put(np);
  96. }
  97. if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
  98. struct device_node *ucc = NULL;
  99. par_io_init(np);
  100. of_node_put(np);
  101. for ( ;(ucc = of_find_node_by_name(ucc, "ucc")) != NULL;)
  102. par_io_of_config(ucc);
  103. of_node_put(ucc);
  104. }
  105. if (bcsr_regs) {
  106. u8 bcsr_phy;
  107. /* Reset the Ethernet PHY */
  108. bcsr_phy = in_be8(&bcsr_regs[9]);
  109. bcsr_phy &= ~0x20;
  110. out_be8(&bcsr_regs[9], bcsr_phy);
  111. udelay(1000);
  112. bcsr_phy = in_be8(&bcsr_regs[9]);
  113. bcsr_phy |= 0x20;
  114. out_be8(&bcsr_regs[9], bcsr_phy);
  115. iounmap(bcsr_regs);
  116. }
  117. #endif /* CONFIG_QUICC_ENGINE */
  118. }
  119. static struct of_device_id mpc85xx_ids[] = {
  120. { .type = "soc", },
  121. { .compatible = "soc", },
  122. { .type = "qe", },
  123. { .type = "mdio", },
  124. {},
  125. };
  126. static int __init mpc85xx_publish_devices(void)
  127. {
  128. if (!machine_is(mpc85xx_mds))
  129. return 0;
  130. /* Publish the QE devices */
  131. of_platform_bus_probe(NULL,mpc85xx_ids,NULL);
  132. return 0;
  133. }
  134. device_initcall(mpc85xx_publish_devices);
  135. static void __init mpc85xx_mds_pic_init(void)
  136. {
  137. struct mpic *mpic;
  138. struct resource r;
  139. struct device_node *np = NULL;
  140. np = of_find_node_by_type(NULL, "open-pic");
  141. if (!np)
  142. return;
  143. if (of_address_to_resource(np, 0, &r)) {
  144. printk(KERN_ERR "Failed to map mpic register space\n");
  145. of_node_put(np);
  146. return;
  147. }
  148. mpic = mpic_alloc(np, r.start,
  149. MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
  150. 0, 256, " OpenPIC ");
  151. BUG_ON(mpic == NULL);
  152. of_node_put(np);
  153. mpic_init(mpic);
  154. #ifdef CONFIG_QUICC_ENGINE
  155. np = of_find_node_by_type(NULL, "qeic");
  156. if (!np)
  157. return;
  158. qe_ic_init(np, 0);
  159. of_node_put(np);
  160. #endif /* CONFIG_QUICC_ENGINE */
  161. }
  162. static int __init mpc85xx_mds_probe(void)
  163. {
  164. unsigned long root = of_get_flat_dt_root();
  165. return of_flat_dt_is_compatible(root, "MPC85xxMDS");
  166. }
  167. define_machine(mpc85xx_mds) {
  168. .name = "MPC85xx MDS",
  169. .probe = mpc85xx_mds_probe,
  170. .setup_arch = mpc85xx_mds_setup_arch,
  171. .init_IRQ = mpc85xx_mds_pic_init,
  172. .get_irq = mpic_get_irq,
  173. .restart = mpc85xx_restart,
  174. .calibrate_decr = generic_calibrate_decr,
  175. .progress = udbg_progress,
  176. };