linux-vybrid_public/drivers/media/dvb/frontends/s5h1432.c

/*
    Samsung s5h1432 DVB-T demodulator driver

    Copyright (C) 2009 Bill Liu <Bill.Liu@Conexant.com>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

*/

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include "dvb_frontend.h"
#include "s5h1432.h"

struct s5h1432_state {

	struct i2c_adapter *i2c;

	/* configuration settings */
	const struct s5h1432_config *config;

	struct dvb_frontend frontend;

	fe_modulation_t current_modulation;
	unsigned int first_tune:1;

	u32 current_frequency;
	int if_freq;

	u8 inversion;
};

static int debug;

#define dprintk(arg...) do {	\
	if (debug)		\
		printk(arg);	\
	} while (0)


static int s5h1432_writereg(struct s5h1432_state *state,
	u8 addr, u8 reg, u8 data)
{
	int ret;
	u8 buf[] = { reg, data };

	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 };

	ret = i2c_transfer(state->i2c, &msg, 1);

	if (ret != 1)
		printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, "
		       "ret == %i)\n", __func__, addr, reg, data, ret);

	return (ret != 1) ? -1 : 0;
}

static u8 s5h1432_readreg(struct s5h1432_state *state, u8 addr, u8 reg)
{
	int ret;
	u8 b0[] = { reg };
	u8 b1[] = { 0 };

	struct i2c_msg msg[] = {
		{ .addr = addr, .flags = 0, .buf = b0, .len = 1 },
		{ .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 1 } };

	ret = i2c_transfer(state->i2c, msg, 2);

	if (ret != 2)
		printk(KERN_ERR "%s: readreg error (ret == %i)\n",
			__func__, ret);
	return b1[0];
}

static int s5h1432_sleep(struct dvb_frontend *fe)
{
	return 0;
}

static int s5h1432_set_channel_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
{

	struct s5h1432_state *state = fe->demodulator_priv;

	u8 reg = 0;


    /* Register        [0x2E] bit 3:2 : 8MHz = 0; 7MHz = 1; 6MHz = 2*/
	reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x2E);
	reg &= ~(0x0C);
	switch (bandwidth) {
	case 6:
		reg |= 0x08;
		break;
	case 7:
		reg |= 0x04;
		break;
	case 8:
		reg |= 0x00;
		break;
	default:
	return 0;
	}
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2E, reg);
    return 1;
}

static int s5h1432_set_IF(struct dvb_frontend *fe, u32 ifFreqHz)
{

	struct s5h1432_state *state = fe->demodulator_priv;

	switch (ifFreqHz) {
	case TAIWAN_HI_IF_FREQ_44_MHZ:
		{
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4 , 0x55);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5 , 0x55);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7 , 0x15);
		    break;
		}
	case EUROPE_HI_IF_FREQ_36_MHZ:
		{
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4 , 0x00);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5 , 0x00);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7 , 0x40);
		    break;
		}
	case IF_FREQ_6_MHZ:
		{
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4 , 0x00);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5 , 0x00);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7 , 0xe0);
		    break;
		}
	case IF_FREQ_3point3_MHZ:
		{
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4 , 0x66);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5 , 0x66);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7 , 0xEE);
		    break;
		}
	case IF_FREQ_3point5_MHZ:
		{
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4 , 0x55);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5 , 0x55);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7 , 0xED);
		    break;
		}
	case IF_FREQ_4_MHZ:
		{
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4 , 0xAA);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5 , 0xAA);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7 , 0xEA);
		    break;
		}
	default:
		{
		u32 value = 0;
		value = (u32) (((48000 - (ifFreqHz / 1000)) * 512 *
				 (u32) 32768) / (48 * 1000));
		printk(KERN_INFO "Default IFFreq %d :reg value = 0x%x \n",
				 ifFreqHz, value);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4 ,
				 (u8) value & 0xFF);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5 ,
				 (u8)(value>>8) & 0xFF);
		    s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7 ,
				 (u8)(value>>16) & 0xFF);
		    break;
	}

	}

    return 1;
}

/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
static int s5h1432_set_frontend(struct dvb_frontend *fe,
	struct dvb_frontend_parameters *p)
{
	u32 dvb_bandwidth = 8;
	struct s5h1432_state *state = fe->demodulator_priv;

	if (p->frequency == state->current_frequency) {
		/*current_frequency = p->frequency;*/
		/*state->current_frequency = p->frequency;*/
	} else {
		fe->ops.tuner_ops.set_params(fe, p); msleep(300);
		s5h1432_set_channel_bandwidth(fe, dvb_bandwidth);
		switch (p->u.ofdm.bandwidth) {
		case BANDWIDTH_6_MHZ:
				dvb_bandwidth = 6;
				s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
				break;
		case BANDWIDTH_7_MHZ:
				dvb_bandwidth = 7;
				s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
				break;
		case BANDWIDTH_8_MHZ:
				dvb_bandwidth = 8;
				s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
				break;
		default:
				return 0;
			}
		/*fe->ops.tuner_ops.set_params(fe, p);*/
/*Soft Reset chip*/
	msleep(30);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09,	0x1a);
	msleep(30);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09,	0x1b);


		s5h1432_set_channel_bandwidth(fe, dvb_bandwidth);
		switch (p->u.ofdm.bandwidth) {
		case BANDWIDTH_6_MHZ:
				dvb_bandwidth = 6;
				s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
				break;
		case BANDWIDTH_7_MHZ:
				dvb_bandwidth = 7;
				s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
				break;
		case BANDWIDTH_8_MHZ:
				dvb_bandwidth = 8;
				s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
				break;
		default:
				return 0;
			}
		/*fe->ops.tuner_ops.set_params(fe,p);*/
/*Soft Reset chip*/
	msleep(30);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09,	0x1a);
	msleep(30);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09,	0x1b);

	}

	state->current_frequency = p->frequency;

	return 0;
}


static int s5h1432_init(struct dvb_frontend *fe)
{
	struct s5h1432_state *state = fe->demodulator_priv;

	u8 reg = 0;
	state->current_frequency = 0;
	printk(KERN_INFO " s5h1432_init().\n");


    /*Set VSB mode as default, this also does a soft reset*/
    /*Initialize registers*/

	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x04,	0xa8);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x05,	0x01);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x07,	0x70);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x19,	0x80);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1b,	0x9D);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1c,	0x30);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1d,	0x20);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e,	0x1B);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2e,	0x40);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42,	0x84);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x50,	0x5a);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x5a,	0xd3);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x68,	0x50);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xb8,	0x3c);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xc4,	0x10);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xcc,	0x9c);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xDA,	0x00);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe1,	0x94);
/*	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf4,	0xa1);*/
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf9,	0x00);

/*For NXP tuner*/

    /*Set 3.3MHz as default IF frequency*/
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4 , 0x66);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5 , 0x66);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7 , 0xEE);
    /* Set reg 0x1E to get the full dynamic range */
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e,	0x31);

/*Mode setting in demod*/
	reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x42);
	reg |= 0x80;
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, reg);
	/*Serial mode*/

/*Soft Reset chip*/

	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09,	0x1a);
	msleep(30);
	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09,	0x1b);


	return 0;
}


static int s5h1432_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
	return 0;
}



static int s5h1432_read_signal_strength(struct dvb_frontend *fe,
	u16 *signal_strength)
{
	return 0;
}

static int s5h1432_read_snr(struct dvb_frontend *fe, u16 *snr)
{
	return 0;
}

static int s5h1432_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
{

	return 0;
}

static int s5h1432_read_ber(struct dvb_frontend *fe, u32 *ber)
{
	return 0;
}

static int s5h1432_get_frontend(struct dvb_frontend *fe,
				struct dvb_frontend_parameters *p)
{
	return 0;
}

static int s5h1432_get_tune_settings(struct dvb_frontend *fe,
				     struct dvb_frontend_tune_settings *tune)
{
	return 0;
}

static void s5h1432_release(struct dvb_frontend *fe)
{
	struct s5h1432_state *state = fe->demodulator_priv;
	kfree(state);
}

static struct dvb_frontend_ops s5h1432_ops;

struct dvb_frontend *s5h1432_attach(const struct s5h1432_config *config,
				    struct i2c_adapter *i2c)
{
	struct s5h1432_state *state = NULL;

	printk(KERN_INFO " Enter s5h1432_attach(). attach success!\n");
	/* allocate memory for the internal state */
	state = kmalloc(sizeof(struct s5h1432_state), GFP_KERNEL);
	if (state == NULL)
		goto error;

	/* setup the state */
	state->config = config;
	state->i2c = i2c;
	state->current_modulation = QAM_16;
	state->inversion = state->config->inversion;

	/* create dvb_frontend */
	memcpy(&state->frontend.ops, &s5h1432_ops,
	       sizeof(struct dvb_frontend_ops));

	state->frontend.demodulator_priv = state;

	return &state->frontend;

error:
	kfree(state);
	return NULL;
}
EXPORT_SYMBOL(s5h1432_attach);

static struct dvb_frontend_ops s5h1432_ops = {

	.info = {
		.name			= "Samsung s5h1432 DVB-T Frontend",
		.type			= FE_OFDM,
		.frequency_min		= 177000000,
		.frequency_max		= 858000000,
		.frequency_stepsize	= 166666,
		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
		FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
		FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
		FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
		FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER
	},

	.init                 = s5h1432_init,
	.sleep                = s5h1432_sleep,
	.set_frontend         = s5h1432_set_frontend,
	.get_frontend         = s5h1432_get_frontend,
	.get_tune_settings    = s5h1432_get_tune_settings,
	.read_status          = s5h1432_read_status,
	.read_ber             = s5h1432_read_ber,
	.read_signal_strength = s5h1432_read_signal_strength,
	.read_snr             = s5h1432_read_snr,
	.read_ucblocks        = s5h1432_read_ucblocks,
	.release              = s5h1432_release,
};

module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Enable verbose debug messages");

MODULE_DESCRIPTION("Samsung s5h1432 DVB-T Demodulator driver");
MODULE_AUTHOR("Bill Liu");
MODULE_LICENSE("GPL");

/*
 * Local variables:
 * c-basic-offset: 8
 */