collie.c 5.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230
  1. /*
  2. * linux/arch/arm/mach-sa1100/collie.c
  3. *
  4. * May be copied or modified under the terms of the GNU General Public
  5. * License. See linux/COPYING for more information.
  6. *
  7. * This file contains all Collie-specific tweaks.
  8. *
  9. * This program is free software; you can redistribute it and/or modify
  10. * it under the terms of the GNU General Public License version 2 as
  11. * published by the Free Software Foundation.
  12. *
  13. * ChangeLog:
  14. * 03-06-2004 John Lenz <jelenz@wisc.edu>
  15. * 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
  16. * 04-16-2001 Lineo Japan,Inc. ...
  17. */
  18. #include <linux/config.h>
  19. #include <linux/init.h>
  20. #include <linux/kernel.h>
  21. #include <linux/tty.h>
  22. #include <linux/delay.h>
  23. #include <linux/platform_device.h>
  24. #include <linux/mtd/mtd.h>
  25. #include <linux/mtd/partitions.h>
  26. #include <linux/timer.h>
  27. #include <asm/hardware.h>
  28. #include <asm/mach-types.h>
  29. #include <asm/irq.h>
  30. #include <asm/setup.h>
  31. #include <asm/arch/collie.h>
  32. #include <asm/mach/arch.h>
  33. #include <asm/mach/flash.h>
  34. #include <asm/mach/map.h>
  35. #include <asm/mach/serial_sa1100.h>
  36. #include <asm/hardware/scoop.h>
  37. #include <asm/mach/sharpsl_param.h>
  38. #include <asm/hardware/locomo.h>
  39. #include <asm/arch/mcp.h>
  40. #include "generic.h"
  41. static struct resource collie_scoop_resources[] = {
  42. [0] = {
  43. .start = 0x40800000,
  44. .end = 0x40800fff,
  45. .flags = IORESOURCE_MEM,
  46. },
  47. };
  48. static struct scoop_config collie_scoop_setup = {
  49. .io_dir = COLLIE_SCOOP_IO_DIR,
  50. .io_out = COLLIE_SCOOP_IO_OUT,
  51. };
  52. struct platform_device colliescoop_device = {
  53. .name = "sharp-scoop",
  54. .id = -1,
  55. .dev = {
  56. .platform_data = &collie_scoop_setup,
  57. },
  58. .num_resources = ARRAY_SIZE(collie_scoop_resources),
  59. .resource = collie_scoop_resources,
  60. };
  61. static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
  62. {
  63. .dev = &colliescoop_device.dev,
  64. .irq = COLLIE_IRQ_GPIO_CF_IRQ,
  65. .cd_irq = COLLIE_IRQ_GPIO_CF_CD,
  66. .cd_irq_str = "PCMCIA0 CD",
  67. },
  68. };
  69. static struct scoop_pcmcia_config collie_pcmcia_config = {
  70. .devs = &collie_pcmcia_scoop[0],
  71. .num_devs = 1,
  72. };
  73. static struct mcp_plat_data collie_mcp_data = {
  74. .mccr0 = MCCR0_ADM,
  75. .sclk_rate = 11981000,
  76. };
  77. static struct sa1100_port_fns collie_port_fns __initdata = {
  78. .set_mctrl = collie_uart_set_mctrl,
  79. .get_mctrl = collie_uart_get_mctrl,
  80. };
  81. static struct resource locomo_resources[] = {
  82. [0] = {
  83. .start = 0x40000000,
  84. .end = 0x40001fff,
  85. .flags = IORESOURCE_MEM,
  86. },
  87. [1] = {
  88. .start = IRQ_GPIO25,
  89. .end = IRQ_GPIO25,
  90. .flags = IORESOURCE_IRQ,
  91. },
  92. };
  93. static struct platform_device locomo_device = {
  94. .name = "locomo",
  95. .id = 0,
  96. .num_resources = ARRAY_SIZE(locomo_resources),
  97. .resource = locomo_resources,
  98. };
  99. static struct platform_device *devices[] __initdata = {
  100. &locomo_device,
  101. &colliescoop_device,
  102. };
  103. static struct mtd_partition collie_partitions[] = {
  104. {
  105. .name = "bootloader",
  106. .offset = 0,
  107. .size = 0x000C0000,
  108. .mask_flags = MTD_WRITEABLE
  109. }, {
  110. .name = "kernel",
  111. .offset = MTDPART_OFS_APPEND,
  112. .size = 0x00100000,
  113. }, {
  114. .name = "rootfs",
  115. .offset = MTDPART_OFS_APPEND,
  116. .size = 0x00e20000,
  117. }
  118. };
  119. static void collie_set_vpp(int vpp)
  120. {
  121. write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
  122. if (vpp)
  123. write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
  124. else
  125. write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
  126. }
  127. static struct flash_platform_data collie_flash_data = {
  128. .map_name = "cfi_probe",
  129. .set_vpp = collie_set_vpp,
  130. .parts = collie_partitions,
  131. .nr_parts = ARRAY_SIZE(collie_partitions),
  132. };
  133. static struct resource collie_flash_resources[] = {
  134. {
  135. .start = SA1100_CS0_PHYS,
  136. .end = SA1100_CS0_PHYS + SZ_32M - 1,
  137. .flags = IORESOURCE_MEM,
  138. }
  139. };
  140. static void __init collie_init(void)
  141. {
  142. int ret = 0;
  143. /* cpu initialize */
  144. GAFR = ( GPIO_SSP_TXD | \
  145. GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
  146. GPIO_32_768kHz );
  147. GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
  148. GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
  149. GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
  150. GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
  151. GPLR = GPIO_GPIO18;
  152. // PPC pin setting
  153. PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
  154. PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
  155. PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
  156. PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
  157. GAFR |= GPIO_32_768kHz;
  158. GPDR |= GPIO_32_768kHz;
  159. TUCR = TUCR_32_768kHz;
  160. platform_scoop_config = &collie_pcmcia_config;
  161. ret = platform_add_devices(devices, ARRAY_SIZE(devices));
  162. if (ret) {
  163. printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
  164. }
  165. sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources,
  166. ARRAY_SIZE(collie_flash_resources));
  167. sa11x0_set_mcp_data(&collie_mcp_data);
  168. sharpsl_save_param();
  169. }
  170. static struct map_desc collie_io_desc[] __initdata = {
  171. { /* 32M main flash (cs0) */
  172. .virtual = 0xe8000000,
  173. .pfn = __phys_to_pfn(0x00000000),
  174. .length = 0x02000000,
  175. .type = MT_DEVICE
  176. }, { /* 32M boot flash (cs1) */
  177. .virtual = 0xea000000,
  178. .pfn = __phys_to_pfn(0x08000000),
  179. .length = 0x02000000,
  180. .type = MT_DEVICE
  181. }
  182. };
  183. static void __init collie_map_io(void)
  184. {
  185. sa1100_map_io();
  186. iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
  187. }
  188. MACHINE_START(COLLIE, "Sharp-Collie")
  189. .phys_io = 0x80000000,
  190. .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
  191. .map_io = collie_map_io,
  192. .init_irq = sa1100_init_irq,
  193. .timer = &sa1100_timer,
  194. .init_machine = collie_init,
  195. MACHINE_END