sa1100_wdt.c 4.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192
  1. /*
  2. * Watchdog driver for the SA11x0/PXA2xx
  3. *
  4. * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
  5. * Based on SoftDog driver by Alan Cox <alan@redhat.com>
  6. *
  7. * This program is free software; you can redistribute it and/or
  8. * modify it under the terms of the GNU General Public License
  9. * as published by the Free Software Foundation; either version
  10. * 2 of the License, or (at your option) any later version.
  11. *
  12. * Neither Oleg Drokin nor iXcelerator.com admit liability nor provide
  13. * warranty for any of this software. This material is provided
  14. * "AS-IS" and at no charge.
  15. *
  16. * (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
  17. *
  18. * 27/11/2000 Initial release
  19. */
  20. #include <linux/config.h>
  21. #include <linux/module.h>
  22. #include <linux/moduleparam.h>
  23. #include <linux/types.h>
  24. #include <linux/kernel.h>
  25. #include <linux/fs.h>
  26. #include <linux/miscdevice.h>
  27. #include <linux/watchdog.h>
  28. #include <linux/init.h>
  29. #ifdef CONFIG_ARCH_PXA
  30. #include <asm/arch/pxa-regs.h>
  31. #endif
  32. #include <asm/hardware.h>
  33. #include <asm/bitops.h>
  34. #include <asm/uaccess.h>
  35. #define OSCR_FREQ CLOCK_TICK_RATE
  36. static unsigned long sa1100wdt_users;
  37. static int pre_margin;
  38. static int boot_status;
  39. /*
  40. * Allow only one person to hold it open
  41. */
  42. static int sa1100dog_open(struct inode *inode, struct file *file)
  43. {
  44. nonseekable_open(inode, file);
  45. if (test_and_set_bit(1,&sa1100wdt_users))
  46. return -EBUSY;
  47. /* Activate SA1100 Watchdog timer */
  48. OSMR3 = OSCR + pre_margin;
  49. OSSR = OSSR_M3;
  50. OWER = OWER_WME;
  51. OIER |= OIER_E3;
  52. return 0;
  53. }
  54. /*
  55. * The watchdog cannot be disabled.
  56. *
  57. * Previous comments suggested that turning off the interrupt by
  58. * clearing OIER[E3] would prevent the watchdog timing out but this
  59. * does not appear to be true (at least on the PXA255).
  60. */
  61. static int sa1100dog_release(struct inode *inode, struct file *file)
  62. {
  63. printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n");
  64. clear_bit(1, &sa1100wdt_users);
  65. return 0;
  66. }
  67. static ssize_t sa1100dog_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
  68. {
  69. if (len)
  70. /* Refresh OSMR3 timer. */
  71. OSMR3 = OSCR + pre_margin;
  72. return len;
  73. }
  74. static struct watchdog_info ident = {
  75. .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
  76. .identity = "SA1100/PXA255 Watchdog",
  77. };
  78. static int sa1100dog_ioctl(struct inode *inode, struct file *file,
  79. unsigned int cmd, unsigned long arg)
  80. {
  81. int ret = -ENOIOCTLCMD;
  82. int time;
  83. void __user *argp = (void __user *)arg;
  84. int __user *p = argp;
  85. switch (cmd) {
  86. case WDIOC_GETSUPPORT:
  87. ret = copy_to_user(argp, &ident,
  88. sizeof(ident)) ? -EFAULT : 0;
  89. break;
  90. case WDIOC_GETSTATUS:
  91. ret = put_user(0, p);
  92. break;
  93. case WDIOC_GETBOOTSTATUS:
  94. ret = put_user(boot_status, p);
  95. break;
  96. case WDIOC_SETTIMEOUT:
  97. ret = get_user(time, p);
  98. if (ret)
  99. break;
  100. if (time <= 0 || time > 255) {
  101. ret = -EINVAL;
  102. break;
  103. }
  104. pre_margin = OSCR_FREQ * time;
  105. OSMR3 = OSCR + pre_margin;
  106. /*fall through*/
  107. case WDIOC_GETTIMEOUT:
  108. ret = put_user(pre_margin / OSCR_FREQ, p);
  109. break;
  110. case WDIOC_KEEPALIVE:
  111. OSMR3 = OSCR + pre_margin;
  112. ret = 0;
  113. break;
  114. }
  115. return ret;
  116. }
  117. static struct file_operations sa1100dog_fops =
  118. {
  119. .owner = THIS_MODULE,
  120. .llseek = no_llseek,
  121. .write = sa1100dog_write,
  122. .ioctl = sa1100dog_ioctl,
  123. .open = sa1100dog_open,
  124. .release = sa1100dog_release,
  125. };
  126. static struct miscdevice sa1100dog_miscdev =
  127. {
  128. .minor = WATCHDOG_MINOR,
  129. .name = "watchdog",
  130. .fops = &sa1100dog_fops,
  131. };
  132. static int margin __initdata = 60; /* (secs) Default is 1 minute */
  133. static int __init sa1100dog_init(void)
  134. {
  135. int ret;
  136. /*
  137. * Read the reset status, and save it for later. If
  138. * we suspend, RCSR will be cleared, and the watchdog
  139. * reset reason will be lost.
  140. */
  141. boot_status = (RCSR & RCSR_WDR) ? WDIOF_CARDRESET : 0;
  142. pre_margin = OSCR_FREQ * margin;
  143. ret = misc_register(&sa1100dog_miscdev);
  144. if (ret == 0)
  145. printk("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
  146. margin);
  147. return ret;
  148. }
  149. static void __exit sa1100dog_exit(void)
  150. {
  151. misc_deregister(&sa1100dog_miscdev);
  152. }
  153. module_init(sa1100dog_init);
  154. module_exit(sa1100dog_exit);
  155. MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>");
  156. MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");
  157. module_param(margin, int, 0);
  158. MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
  159. MODULE_LICENSE("GPL");
  160. MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);