Kconfig 4.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218
  1. # Helper to resolve issues with configs that have SPI enabled but I2C
  2. # modular, meaning we can't build the codec driver in with I2C support.
  3. # We use an ordered list of conditional defaults to pick the appropriate
  4. # setting - SPI can't be modular so that case doesn't need to be covered.
  5. config SND_SOC_I2C_AND_SPI
  6. tristate
  7. default m if I2C=m
  8. default y if I2C=y
  9. default y if SPI_MASTER=y
  10. config SND_SOC_ALL_CODECS
  11. tristate "Build all ASoC CODEC drivers"
  12. select SND_SOC_L3
  13. select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
  14. select SND_SOC_AD1836 if SPI_MASTER
  15. select SND_SOC_AD1938 if SPI_MASTER
  16. select SND_SOC_AD1980 if SND_SOC_AC97_BUS
  17. select SND_SOC_AD73311 if I2C
  18. select SND_SOC_AK4104 if SPI_MASTER
  19. select SND_SOC_AK4535 if I2C
  20. select SND_SOC_CS4270 if I2C
  21. select SND_SOC_MAX9877 if I2C
  22. select SND_SOC_PCM3008
  23. select SND_SOC_SPDIF
  24. select SND_SOC_SSM2602 if I2C
  25. select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
  26. select SND_SOC_TLV320AIC23 if I2C
  27. select SND_SOC_TLV320AIC26 if SPI_MASTER
  28. select SND_SOC_TLV320AIC3X if I2C
  29. select SND_SOC_TWL4030 if TWL4030_CORE
  30. select SND_SOC_UDA134X
  31. select SND_SOC_UDA1380 if I2C
  32. select SND_SOC_WM8350 if MFD_WM8350
  33. select SND_SOC_WM8400 if MFD_WM8400
  34. select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
  35. select SND_SOC_WM8523 if I2C
  36. select SND_SOC_WM8580 if I2C
  37. select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
  38. select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
  39. select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
  40. select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
  41. select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
  42. select SND_SOC_WM8900 if I2C
  43. select SND_SOC_WM8903 if I2C
  44. select SND_SOC_WM8940 if I2C
  45. select SND_SOC_WM8960 if I2C
  46. select SND_SOC_WM8961 if I2C
  47. select SND_SOC_WM8971 if I2C
  48. select SND_SOC_WM8974 if I2C
  49. select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
  50. select SND_SOC_WM8990 if I2C
  51. select SND_SOC_WM8993 if I2C
  52. select SND_SOC_WM9081 if I2C
  53. select SND_SOC_WM9705 if SND_SOC_AC97_BUS
  54. select SND_SOC_WM9712 if SND_SOC_AC97_BUS
  55. select SND_SOC_WM9713 if SND_SOC_AC97_BUS
  56. help
  57. Normally ASoC codec drivers are only built if a machine driver which
  58. uses them is also built since they are only usable with a machine
  59. driver. Selecting this option will allow these drivers to be built
  60. without an explicit machine driver for test and development purposes.
  61. Support for the bus types used to access the codecs to be built must
  62. be selected separately.
  63. If unsure select "N".
  64. config SND_SOC_WM_HUBS
  65. tristate
  66. default y if SND_SOC_WM8993=y
  67. default m if SND_SOC_WM8993=m
  68. config SND_SOC_AC97_CODEC
  69. tristate
  70. select SND_AC97_CODEC
  71. config SND_SOC_AD1836
  72. tristate
  73. config SND_SOC_AD1938
  74. tristate
  75. config SND_SOC_AD1980
  76. tristate
  77. config SND_SOC_AD73311
  78. tristate
  79. config SND_SOC_AK4104
  80. tristate
  81. config SND_SOC_AK4535
  82. tristate
  83. # Cirrus Logic CS4270 Codec
  84. config SND_SOC_CS4270
  85. tristate
  86. # Cirrus Logic CS4270 Codec VD = 3.3V Errata
  87. # Select if you are affected by the errata where the part will not function
  88. # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
  89. # not select any sample rates that require MCLK to be divided by 1.5.
  90. config SND_SOC_CS4270_VD33_ERRATA
  91. bool
  92. depends on SND_SOC_CS4270
  93. config SND_SOC_CX20442
  94. tristate
  95. config SND_SOC_L3
  96. tristate
  97. config SND_SOC_PCM3008
  98. tristate
  99. config SND_SOC_SPDIF
  100. tristate
  101. config SND_SOC_SSM2602
  102. tristate
  103. config SND_SOC_STAC9766
  104. tristate
  105. config SND_SOC_TLV320AIC23
  106. tristate
  107. config SND_SOC_TLV320AIC26
  108. tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
  109. depends on SPI
  110. config SND_SOC_TLV320AIC3X
  111. tristate
  112. config SND_SOC_TWL4030
  113. tristate
  114. config SND_SOC_UDA134X
  115. tristate
  116. config SND_SOC_UDA1380
  117. tristate
  118. config SND_SOC_WM8350
  119. tristate
  120. config SND_SOC_WM8400
  121. tristate
  122. config SND_SOC_WM8510
  123. tristate
  124. config SND_SOC_WM8523
  125. tristate
  126. config SND_SOC_WM8580
  127. tristate
  128. config SND_SOC_WM8728
  129. tristate
  130. config SND_SOC_WM8731
  131. tristate
  132. config SND_SOC_WM8750
  133. tristate
  134. config SND_SOC_WM8753
  135. tristate
  136. config SND_SOC_WM8776
  137. tristate
  138. config SND_SOC_WM8900
  139. tristate
  140. config SND_SOC_WM8903
  141. tristate
  142. config SND_SOC_WM8940
  143. tristate
  144. config SND_SOC_WM8960
  145. tristate
  146. config SND_SOC_WM8961
  147. tristate
  148. config SND_SOC_WM8971
  149. tristate
  150. config SND_SOC_WM8974
  151. tristate
  152. config SND_SOC_WM8988
  153. tristate
  154. config SND_SOC_WM8990
  155. tristate
  156. config SND_SOC_WM8993
  157. tristate
  158. config SND_SOC_WM9081
  159. tristate
  160. config SND_SOC_WM9705
  161. tristate
  162. config SND_SOC_WM9712
  163. tristate
  164. config SND_SOC_WM9713
  165. tristate
  166. # Amp
  167. config SND_SOC_MAX9877
  168. tristate