agg-rx.c 10 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326
  1. /*
  2. * HT handling
  3. *
  4. * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
  5. * Copyright 2002-2005, Instant802 Networks, Inc.
  6. * Copyright 2005-2006, Devicescape Software, Inc.
  7. * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
  8. * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
  9. * Copyright 2007-2010, Intel Corporation
  10. *
  11. * This program is free software; you can redistribute it and/or modify
  12. * it under the terms of the GNU General Public License version 2 as
  13. * published by the Free Software Foundation.
  14. */
  15. /**
  16. * DOC: RX A-MPDU aggregation
  17. *
  18. * Aggregation on the RX side requires only implementing the
  19. * @ampdu_action callback that is invoked to start/stop any
  20. * block-ack sessions for RX aggregation.
  21. *
  22. * When RX aggregation is started by the peer, the driver is
  23. * notified via @ampdu_action function, with the
  24. * %IEEE80211_AMPDU_RX_START action, and may reject the request
  25. * in which case a negative response is sent to the peer, if it
  26. * accepts it a positive response is sent.
  27. *
  28. * While the session is active, the device/driver are required
  29. * to de-aggregate frames and pass them up one by one to mac80211,
  30. * which will handle the reorder buffer.
  31. *
  32. * When the aggregation session is stopped again by the peer or
  33. * ourselves, the driver's @ampdu_action function will be called
  34. * with the action %IEEE80211_AMPDU_RX_STOP. In this case, the
  35. * call must not fail.
  36. */
  37. #include <linux/ieee80211.h>
  38. #include <linux/slab.h>
  39. #include <net/mac80211.h>
  40. #include "ieee80211_i.h"
  41. #include "driver-ops.h"
  42. static void ieee80211_free_tid_rx(struct rcu_head *h)
  43. {
  44. struct tid_ampdu_rx *tid_rx =
  45. container_of(h, struct tid_ampdu_rx, rcu_head);
  46. int i;
  47. for (i = 0; i < tid_rx->buf_size; i++)
  48. dev_kfree_skb(tid_rx->reorder_buf[i]);
  49. kfree(tid_rx->reorder_buf);
  50. kfree(tid_rx->reorder_time);
  51. kfree(tid_rx);
  52. }
  53. void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
  54. u16 initiator, u16 reason, bool tx)
  55. {
  56. struct ieee80211_local *local = sta->local;
  57. struct tid_ampdu_rx *tid_rx;
  58. lockdep_assert_held(&sta->ampdu_mlme.mtx);
  59. tid_rx = sta->ampdu_mlme.tid_rx[tid];
  60. if (!tid_rx)
  61. return;
  62. rcu_assign_pointer(sta->ampdu_mlme.tid_rx[tid], NULL);
  63. #ifdef CONFIG_MAC80211_HT_DEBUG
  64. printk(KERN_DEBUG "Rx BA session stop requested for %pM tid %u\n",
  65. sta->sta.addr, tid);
  66. #endif /* CONFIG_MAC80211_HT_DEBUG */
  67. if (drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_STOP,
  68. &sta->sta, tid, NULL, 0))
  69. printk(KERN_DEBUG "HW problem - can not stop rx "
  70. "aggregation for tid %d\n", tid);
  71. /* check if this is a self generated aggregation halt */
  72. if (initiator == WLAN_BACK_RECIPIENT && tx)
  73. ieee80211_send_delba(sta->sdata, sta->sta.addr,
  74. tid, 0, reason);
  75. del_timer_sync(&tid_rx->session_timer);
  76. del_timer_sync(&tid_rx->reorder_timer);
  77. call_rcu(&tid_rx->rcu_head, ieee80211_free_tid_rx);
  78. }
  79. void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
  80. u16 initiator, u16 reason, bool tx)
  81. {
  82. mutex_lock(&sta->ampdu_mlme.mtx);
  83. ___ieee80211_stop_rx_ba_session(sta, tid, initiator, reason, tx);
  84. mutex_unlock(&sta->ampdu_mlme.mtx);
  85. }
  86. /*
  87. * After accepting the AddBA Request we activated a timer,
  88. * resetting it after each frame that arrives from the originator.
  89. */
  90. static void sta_rx_agg_session_timer_expired(unsigned long data)
  91. {
  92. /* not an elegant detour, but there is no choice as the timer passes
  93. * only one argument, and various sta_info are needed here, so init
  94. * flow in sta_info_create gives the TID as data, while the timer_to_id
  95. * array gives the sta through container_of */
  96. u8 *ptid = (u8 *)data;
  97. u8 *timer_to_id = ptid - *ptid;
  98. struct sta_info *sta = container_of(timer_to_id, struct sta_info,
  99. timer_to_tid[0]);
  100. #ifdef CONFIG_MAC80211_HT_DEBUG
  101. printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid);
  102. #endif
  103. set_bit(*ptid, sta->ampdu_mlme.tid_rx_timer_expired);
  104. ieee80211_queue_work(&sta->local->hw, &sta->ampdu_mlme.work);
  105. }
  106. static void sta_rx_agg_reorder_timer_expired(unsigned long data)
  107. {
  108. u8 *ptid = (u8 *)data;
  109. u8 *timer_to_id = ptid - *ptid;
  110. struct sta_info *sta = container_of(timer_to_id, struct sta_info,
  111. timer_to_tid[0]);
  112. rcu_read_lock();
  113. ieee80211_release_reorder_timeout(sta, *ptid);
  114. rcu_read_unlock();
  115. }
  116. static void ieee80211_send_addba_resp(struct ieee80211_sub_if_data *sdata, u8 *da, u16 tid,
  117. u8 dialog_token, u16 status, u16 policy,
  118. u16 buf_size, u16 timeout)
  119. {
  120. struct ieee80211_local *local = sdata->local;
  121. struct sk_buff *skb;
  122. struct ieee80211_mgmt *mgmt;
  123. u16 capab;
  124. skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
  125. if (!skb) {
  126. printk(KERN_DEBUG "%s: failed to allocate buffer "
  127. "for addba resp frame\n", sdata->name);
  128. return;
  129. }
  130. skb_reserve(skb, local->hw.extra_tx_headroom);
  131. mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
  132. memset(mgmt, 0, 24);
  133. memcpy(mgmt->da, da, ETH_ALEN);
  134. memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
  135. if (sdata->vif.type == NL80211_IFTYPE_AP ||
  136. sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
  137. memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
  138. else if (sdata->vif.type == NL80211_IFTYPE_STATION)
  139. memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
  140. mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
  141. IEEE80211_STYPE_ACTION);
  142. skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_resp));
  143. mgmt->u.action.category = WLAN_CATEGORY_BACK;
  144. mgmt->u.action.u.addba_resp.action_code = WLAN_ACTION_ADDBA_RESP;
  145. mgmt->u.action.u.addba_resp.dialog_token = dialog_token;
  146. capab = (u16)(policy << 1); /* bit 1 aggregation policy */
  147. capab |= (u16)(tid << 2); /* bit 5:2 TID number */
  148. capab |= (u16)(buf_size << 6); /* bit 15:6 max size of aggregation */
  149. mgmt->u.action.u.addba_resp.capab = cpu_to_le16(capab);
  150. mgmt->u.action.u.addba_resp.timeout = cpu_to_le16(timeout);
  151. mgmt->u.action.u.addba_resp.status = cpu_to_le16(status);
  152. ieee80211_tx_skb(sdata, skb);
  153. }
  154. void ieee80211_process_addba_request(struct ieee80211_local *local,
  155. struct sta_info *sta,
  156. struct ieee80211_mgmt *mgmt,
  157. size_t len)
  158. {
  159. struct tid_ampdu_rx *tid_agg_rx;
  160. u16 capab, tid, timeout, ba_policy, buf_size, start_seq_num, status;
  161. u8 dialog_token;
  162. int ret = -EOPNOTSUPP;
  163. /* extract session parameters from addba request frame */
  164. dialog_token = mgmt->u.action.u.addba_req.dialog_token;
  165. timeout = le16_to_cpu(mgmt->u.action.u.addba_req.timeout);
  166. start_seq_num =
  167. le16_to_cpu(mgmt->u.action.u.addba_req.start_seq_num) >> 4;
  168. capab = le16_to_cpu(mgmt->u.action.u.addba_req.capab);
  169. ba_policy = (capab & IEEE80211_ADDBA_PARAM_POLICY_MASK) >> 1;
  170. tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
  171. buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
  172. status = WLAN_STATUS_REQUEST_DECLINED;
  173. if (test_sta_flags(sta, WLAN_STA_BLOCK_BA)) {
  174. #ifdef CONFIG_MAC80211_HT_DEBUG
  175. printk(KERN_DEBUG "Suspend in progress. "
  176. "Denying ADDBA request\n");
  177. #endif
  178. goto end_no_lock;
  179. }
  180. /* sanity check for incoming parameters:
  181. * check if configuration can support the BA policy
  182. * and if buffer size does not exceeds max value */
  183. /* XXX: check own ht delayed BA capability?? */
  184. if (((ba_policy != 1) &&
  185. (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA))) ||
  186. (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
  187. status = WLAN_STATUS_INVALID_QOS_PARAM;
  188. #ifdef CONFIG_MAC80211_HT_DEBUG
  189. if (net_ratelimit())
  190. printk(KERN_DEBUG "AddBA Req with bad params from "
  191. "%pM on tid %u. policy %d, buffer size %d\n",
  192. mgmt->sa, tid, ba_policy,
  193. buf_size);
  194. #endif /* CONFIG_MAC80211_HT_DEBUG */
  195. goto end_no_lock;
  196. }
  197. /* determine default buffer size */
  198. if (buf_size == 0)
  199. buf_size = IEEE80211_MAX_AMPDU_BUF;
  200. /* make sure the size doesn't exceed the maximum supported by the hw */
  201. if (buf_size > local->hw.max_rx_aggregation_subframes)
  202. buf_size = local->hw.max_rx_aggregation_subframes;
  203. /* examine state machine */
  204. mutex_lock(&sta->ampdu_mlme.mtx);
  205. if (sta->ampdu_mlme.tid_rx[tid]) {
  206. #ifdef CONFIG_MAC80211_HT_DEBUG
  207. if (net_ratelimit())
  208. printk(KERN_DEBUG "unexpected AddBA Req from "
  209. "%pM on tid %u\n",
  210. mgmt->sa, tid);
  211. #endif /* CONFIG_MAC80211_HT_DEBUG */
  212. goto end;
  213. }
  214. /* prepare A-MPDU MLME for Rx aggregation */
  215. tid_agg_rx = kmalloc(sizeof(struct tid_ampdu_rx), GFP_KERNEL);
  216. if (!tid_agg_rx) {
  217. #ifdef CONFIG_MAC80211_HT_DEBUG
  218. if (net_ratelimit())
  219. printk(KERN_ERR "allocate rx mlme to tid %d failed\n",
  220. tid);
  221. #endif
  222. goto end;
  223. }
  224. spin_lock_init(&tid_agg_rx->reorder_lock);
  225. /* rx timer */
  226. tid_agg_rx->session_timer.function = sta_rx_agg_session_timer_expired;
  227. tid_agg_rx->session_timer.data = (unsigned long)&sta->timer_to_tid[tid];
  228. init_timer(&tid_agg_rx->session_timer);
  229. /* rx reorder timer */
  230. tid_agg_rx->reorder_timer.function = sta_rx_agg_reorder_timer_expired;
  231. tid_agg_rx->reorder_timer.data = (unsigned long)&sta->timer_to_tid[tid];
  232. init_timer(&tid_agg_rx->reorder_timer);
  233. /* prepare reordering buffer */
  234. tid_agg_rx->reorder_buf =
  235. kcalloc(buf_size, sizeof(struct sk_buff *), GFP_KERNEL);
  236. tid_agg_rx->reorder_time =
  237. kcalloc(buf_size, sizeof(unsigned long), GFP_KERNEL);
  238. if (!tid_agg_rx->reorder_buf || !tid_agg_rx->reorder_time) {
  239. #ifdef CONFIG_MAC80211_HT_DEBUG
  240. if (net_ratelimit())
  241. printk(KERN_ERR "can not allocate reordering buffer "
  242. "to tid %d\n", tid);
  243. #endif
  244. kfree(tid_agg_rx->reorder_buf);
  245. kfree(tid_agg_rx->reorder_time);
  246. kfree(tid_agg_rx);
  247. goto end;
  248. }
  249. ret = drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_RX_START,
  250. &sta->sta, tid, &start_seq_num, 0);
  251. #ifdef CONFIG_MAC80211_HT_DEBUG
  252. printk(KERN_DEBUG "Rx A-MPDU request on tid %d result %d\n", tid, ret);
  253. #endif /* CONFIG_MAC80211_HT_DEBUG */
  254. if (ret) {
  255. kfree(tid_agg_rx->reorder_buf);
  256. kfree(tid_agg_rx->reorder_time);
  257. kfree(tid_agg_rx);
  258. goto end;
  259. }
  260. /* update data */
  261. tid_agg_rx->dialog_token = dialog_token;
  262. tid_agg_rx->ssn = start_seq_num;
  263. tid_agg_rx->head_seq_num = start_seq_num;
  264. tid_agg_rx->buf_size = buf_size;
  265. tid_agg_rx->timeout = timeout;
  266. tid_agg_rx->stored_mpdu_num = 0;
  267. status = WLAN_STATUS_SUCCESS;
  268. /* activate it for RX */
  269. rcu_assign_pointer(sta->ampdu_mlme.tid_rx[tid], tid_agg_rx);
  270. if (timeout)
  271. mod_timer(&tid_agg_rx->session_timer, TU_TO_EXP_TIME(timeout));
  272. end:
  273. mutex_unlock(&sta->ampdu_mlme.mtx);
  274. end_no_lock:
  275. ieee80211_send_addba_resp(sta->sdata, sta->sta.addr, tid,
  276. dialog_token, status, 1, buf_size, timeout);
  277. }