tx.c 5.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204
  1. /*
  2. * This file contains the handling of TX in wlan driver.
  3. */
  4. #include <linux/netdevice.h>
  5. #include <linux/etherdevice.h>
  6. #include <linux/sched.h>
  7. #include <net/cfg80211.h>
  8. #include "host.h"
  9. #include "radiotap.h"
  10. #include "decl.h"
  11. #include "defs.h"
  12. #include "dev.h"
  13. /**
  14. * convert_radiotap_rate_to_mv - converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE
  15. * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1)
  16. *
  17. * @rate: Input rate
  18. * returns: Output Rate (0 if invalid)
  19. */
  20. static u32 convert_radiotap_rate_to_mv(u8 rate)
  21. {
  22. switch (rate) {
  23. case 2: /* 1 Mbps */
  24. return 0 | (1 << 4);
  25. case 4: /* 2 Mbps */
  26. return 1 | (1 << 4);
  27. case 11: /* 5.5 Mbps */
  28. return 2 | (1 << 4);
  29. case 22: /* 11 Mbps */
  30. return 3 | (1 << 4);
  31. case 12: /* 6 Mbps */
  32. return 4 | (1 << 4);
  33. case 18: /* 9 Mbps */
  34. return 5 | (1 << 4);
  35. case 24: /* 12 Mbps */
  36. return 6 | (1 << 4);
  37. case 36: /* 18 Mbps */
  38. return 7 | (1 << 4);
  39. case 48: /* 24 Mbps */
  40. return 8 | (1 << 4);
  41. case 72: /* 36 Mbps */
  42. return 9 | (1 << 4);
  43. case 96: /* 48 Mbps */
  44. return 10 | (1 << 4);
  45. case 108: /* 54 Mbps */
  46. return 11 | (1 << 4);
  47. }
  48. return 0;
  49. }
  50. /**
  51. * lbs_hard_start_xmit - checks the conditions and sends packet to IF
  52. * layer if everything is ok
  53. *
  54. * @skb: A pointer to skb which includes TX packet
  55. * @dev: A pointer to the &struct net_device
  56. * returns: 0 or -1
  57. */
  58. netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
  59. {
  60. unsigned long flags;
  61. struct lbs_private *priv = dev->ml_priv;
  62. struct txpd *txpd;
  63. char *p802x_hdr;
  64. uint16_t pkt_len;
  65. netdev_tx_t ret = NETDEV_TX_OK;
  66. lbs_deb_enter(LBS_DEB_TX);
  67. /* We need to protect against the queues being restarted before
  68. we get round to stopping them */
  69. spin_lock_irqsave(&priv->driver_lock, flags);
  70. if (priv->surpriseremoved)
  71. goto free;
  72. if (!skb->len || (skb->len > MRVDRV_ETH_TX_PACKET_BUFFER_SIZE)) {
  73. lbs_deb_tx("tx err: skb length %d 0 or > %zd\n",
  74. skb->len, MRVDRV_ETH_TX_PACKET_BUFFER_SIZE);
  75. /* We'll never manage to send this one; drop it and return 'OK' */
  76. dev->stats.tx_dropped++;
  77. dev->stats.tx_errors++;
  78. goto free;
  79. }
  80. netif_stop_queue(priv->dev);
  81. if (priv->mesh_dev)
  82. netif_stop_queue(priv->mesh_dev);
  83. if (priv->tx_pending_len) {
  84. /* This can happen if packets come in on the mesh and eth
  85. device simultaneously -- there's no mutual exclusion on
  86. hard_start_xmit() calls between devices. */
  87. lbs_deb_tx("Packet on %s while busy\n", dev->name);
  88. ret = NETDEV_TX_BUSY;
  89. goto unlock;
  90. }
  91. priv->tx_pending_len = -1;
  92. spin_unlock_irqrestore(&priv->driver_lock, flags);
  93. lbs_deb_hex(LBS_DEB_TX, "TX Data", skb->data, min_t(unsigned int, skb->len, 100));
  94. txpd = (void *)priv->tx_pending_buf;
  95. memset(txpd, 0, sizeof(struct txpd));
  96. p802x_hdr = skb->data;
  97. pkt_len = skb->len;
  98. if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) {
  99. struct tx_radiotap_hdr *rtap_hdr = (void *)skb->data;
  100. /* set txpd fields from the radiotap header */
  101. txpd->tx_control = cpu_to_le32(convert_radiotap_rate_to_mv(rtap_hdr->rate));
  102. /* skip the radiotap header */
  103. p802x_hdr += sizeof(*rtap_hdr);
  104. pkt_len -= sizeof(*rtap_hdr);
  105. /* copy destination address from 802.11 header */
  106. memcpy(txpd->tx_dest_addr_high, p802x_hdr + 4, ETH_ALEN);
  107. } else {
  108. /* copy destination address from 802.3 header */
  109. memcpy(txpd->tx_dest_addr_high, p802x_hdr, ETH_ALEN);
  110. }
  111. txpd->tx_packet_length = cpu_to_le16(pkt_len);
  112. txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd));
  113. lbs_mesh_set_txpd(priv, dev, txpd);
  114. lbs_deb_hex(LBS_DEB_TX, "txpd", (u8 *) &txpd, sizeof(struct txpd));
  115. lbs_deb_hex(LBS_DEB_TX, "Tx Data", (u8 *) p802x_hdr, le16_to_cpu(txpd->tx_packet_length));
  116. memcpy(&txpd[1], p802x_hdr, le16_to_cpu(txpd->tx_packet_length));
  117. spin_lock_irqsave(&priv->driver_lock, flags);
  118. priv->tx_pending_len = pkt_len + sizeof(struct txpd);
  119. lbs_deb_tx("%s lined up packet\n", __func__);
  120. dev->stats.tx_packets++;
  121. dev->stats.tx_bytes += skb->len;
  122. if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) {
  123. /* Keep the skb to echo it back once Tx feedback is
  124. received from FW */
  125. skb_orphan(skb);
  126. /* Keep the skb around for when we get feedback */
  127. priv->currenttxskb = skb;
  128. } else {
  129. free:
  130. dev_kfree_skb_any(skb);
  131. }
  132. unlock:
  133. spin_unlock_irqrestore(&priv->driver_lock, flags);
  134. wake_up(&priv->waitq);
  135. lbs_deb_leave_args(LBS_DEB_TX, "ret %d", ret);
  136. return ret;
  137. }
  138. /**
  139. * lbs_send_tx_feedback - sends to the host the last transmitted packet,
  140. * filling the radiotap headers with transmission information.
  141. *
  142. * @priv: A pointer to &struct lbs_private structure
  143. * @try_count: A 32-bit value containing transmission retry status.
  144. *
  145. * returns: void
  146. */
  147. void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count)
  148. {
  149. struct tx_radiotap_hdr *radiotap_hdr;
  150. if (priv->wdev->iftype != NL80211_IFTYPE_MONITOR ||
  151. priv->currenttxskb == NULL)
  152. return;
  153. radiotap_hdr = (struct tx_radiotap_hdr *)priv->currenttxskb->data;
  154. radiotap_hdr->data_retries = try_count ?
  155. (1 + priv->txretrycount - try_count) : 0;
  156. priv->currenttxskb->protocol = eth_type_trans(priv->currenttxskb,
  157. priv->dev);
  158. netif_rx(priv->currenttxskb);
  159. priv->currenttxskb = NULL;
  160. if (priv->connect_status == LBS_CONNECTED)
  161. netif_wake_queue(priv->dev);
  162. if (priv->mesh_dev && lbs_mesh_connected(priv))
  163. netif_wake_queue(priv->mesh_dev);
  164. }
  165. EXPORT_SYMBOL_GPL(lbs_send_tx_feedback);