Kconfig 2.1 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182
  1. config ATH9K_HW
  2. tristate
  3. config ATH9K_COMMON
  4. tristate
  5. config ATH9K
  6. tristate "Atheros 802.11n wireless cards support"
  7. depends on MAC80211
  8. select ATH9K_HW
  9. select MAC80211_LEDS
  10. select LEDS_CLASS
  11. select NEW_LEDS
  12. select ATH9K_COMMON
  13. ---help---
  14. This module adds support for wireless adapters based on
  15. Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
  16. of chipsets. For a specific list of supported external
  17. cards, laptops that already ship with these cards and
  18. APs that come with these cards refer to to ath9k wiki
  19. products page:
  20. http://wireless.kernel.org/en/users/Drivers/ath9k/products
  21. If you choose to build a module, it'll be called ath9k.
  22. config ATH9K_PCI
  23. bool "Atheros ath9k PCI/PCIe bus support"
  24. depends on ATH9K && PCI
  25. default PCI
  26. ---help---
  27. This option enables the PCI bus support in ath9k.
  28. Say Y, if you have a compatible PCI/PCIe wireless card.
  29. config ATH9K_AHB
  30. bool "Atheros ath9k AHB bus support"
  31. depends on ATH9K
  32. default n
  33. ---help---
  34. This option enables the AHB bus support in ath9k.
  35. Say Y, if you have a SoC with a compatible built-in
  36. wireless MAC. Say N if unsure.
  37. config ATH9K_DEBUGFS
  38. bool "Atheros ath9k debugging"
  39. depends on ATH9K && DEBUG_FS
  40. ---help---
  41. Say Y, if you need access to ath9k's statistics for
  42. interrupts, rate control, etc.
  43. Also required for changing debug message flags at run time.
  44. config ATH9K_RATE_CONTROL
  45. bool "Atheros ath9k rate control"
  46. depends on ATH9K
  47. default y
  48. ---help---
  49. Say Y, if you want to use the ath9k specific rate control
  50. module instead of minstrel_ht.
  51. config ATH9K_HTC
  52. tristate "Atheros HTC based wireless cards support"
  53. depends on USB && MAC80211
  54. select ATH9K_HW
  55. select MAC80211_LEDS
  56. select LEDS_CLASS
  57. select NEW_LEDS
  58. select ATH9K_COMMON
  59. ---help---
  60. Support for Atheros HTC based cards.
  61. Chipsets supported: AR9271
  62. For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
  63. The built module will be ath9k_htc.
  64. config ATH9K_HTC_DEBUGFS
  65. bool "Atheros ath9k_htc debugging"
  66. depends on ATH9K_HTC && DEBUG_FS
  67. ---help---
  68. Say Y, if you need access to ath9k_htc's statistics.