pluto2.c 20 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822
  1. /*
  2. * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T]
  3. *
  4. * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org>
  5. *
  6. * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/
  7. * by Dany Salman <salmandany@yahoo.fr>
  8. * Copyright (c) 2004 TDF
  9. *
  10. * This program is free software; you can redistribute it and/or modify
  11. * it under the terms of the GNU General Public License as published by
  12. * the Free Software Foundation; either version 2 of the License, or
  13. * (at your option) any later version.
  14. *
  15. * This program is distributed in the hope that it will be useful,
  16. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  18. * GNU General Public License for more details.
  19. *
  20. * You should have received a copy of the GNU General Public License
  21. * along with this program; if not, write to the Free Software
  22. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23. *
  24. */
  25. #include <linux/i2c.h>
  26. #include <linux/i2c-algo-bit.h>
  27. #include <linux/init.h>
  28. #include <linux/kernel.h>
  29. #include <linux/module.h>
  30. #include <linux/pci.h>
  31. #include <linux/dma-mapping.h>
  32. #include <linux/slab.h>
  33. #include "demux.h"
  34. #include "dmxdev.h"
  35. #include "dvb_demux.h"
  36. #include "dvb_frontend.h"
  37. #include "dvb_net.h"
  38. #include "dvbdev.h"
  39. #include "tda1004x.h"
  40. DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
  41. #define DRIVER_NAME "pluto2"
  42. #define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */
  43. #define REG_PCAR 0x0020 /* PC address register */
  44. #define REG_TSCR 0x0024 /* TS ctrl & status */
  45. #define REG_MISC 0x0028 /* miscellaneous */
  46. #define REG_MMAC 0x002c /* MSB MAC address */
  47. #define REG_IMAC 0x0030 /* ISB MAC address */
  48. #define REG_LMAC 0x0034 /* LSB MAC address */
  49. #define REG_SPID 0x0038 /* SPI data */
  50. #define REG_SLCS 0x003c /* serial links ctrl/status */
  51. #define PID0_NOFIL (0x0001 << 16)
  52. #define PIDn_ENP (0x0001 << 15)
  53. #define PID0_END (0x0001 << 14)
  54. #define PID0_AFIL (0x0001 << 13)
  55. #define PIDn_PID (0x1fff << 0)
  56. #define TSCR_NBPACKETS (0x00ff << 24)
  57. #define TSCR_DEM (0x0001 << 17)
  58. #define TSCR_DE (0x0001 << 16)
  59. #define TSCR_RSTN (0x0001 << 15)
  60. #define TSCR_MSKO (0x0001 << 14)
  61. #define TSCR_MSKA (0x0001 << 13)
  62. #define TSCR_MSKL (0x0001 << 12)
  63. #define TSCR_OVR (0x0001 << 11)
  64. #define TSCR_AFUL (0x0001 << 10)
  65. #define TSCR_LOCK (0x0001 << 9)
  66. #define TSCR_IACK (0x0001 << 8)
  67. #define TSCR_ADEF (0x007f << 0)
  68. #define MISC_DVR (0x0fff << 4)
  69. #define MISC_ALED (0x0001 << 3)
  70. #define MISC_FRST (0x0001 << 2)
  71. #define MISC_LED1 (0x0001 << 1)
  72. #define MISC_LED0 (0x0001 << 0)
  73. #define SPID_SPIDR (0x00ff << 0)
  74. #define SLCS_SCL (0x0001 << 7)
  75. #define SLCS_SDA (0x0001 << 6)
  76. #define SLCS_CSN (0x0001 << 2)
  77. #define SLCS_OVR (0x0001 << 1)
  78. #define SLCS_SWC (0x0001 << 0)
  79. #define TS_DMA_PACKETS (8)
  80. #define TS_DMA_BYTES (188 * TS_DMA_PACKETS)
  81. #define I2C_ADDR_TDA10046 0x10
  82. #define I2C_ADDR_TUA6034 0xc2
  83. #define NHWFILTERS 8
  84. struct pluto {
  85. /* pci */
  86. struct pci_dev *pdev;
  87. u8 __iomem *io_mem;
  88. /* dvb */
  89. struct dmx_frontend hw_frontend;
  90. struct dmx_frontend mem_frontend;
  91. struct dmxdev dmxdev;
  92. struct dvb_adapter dvb_adapter;
  93. struct dvb_demux demux;
  94. struct dvb_frontend *fe;
  95. struct dvb_net dvbnet;
  96. unsigned int full_ts_users;
  97. unsigned int users;
  98. /* i2c */
  99. struct i2c_algo_bit_data i2c_bit;
  100. struct i2c_adapter i2c_adap;
  101. unsigned int i2cbug;
  102. /* irq */
  103. unsigned int overflow;
  104. unsigned int dead;
  105. /* dma */
  106. dma_addr_t dma_addr;
  107. u8 dma_buf[TS_DMA_BYTES];
  108. u8 dummy[4096];
  109. };
  110. static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed)
  111. {
  112. return container_of(feed->demux, struct pluto, demux);
  113. }
  114. static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe)
  115. {
  116. return container_of(fe->dvb, struct pluto, dvb_adapter);
  117. }
  118. static inline u32 pluto_readreg(struct pluto *pluto, u32 reg)
  119. {
  120. return readl(&pluto->io_mem[reg]);
  121. }
  122. static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val)
  123. {
  124. writel(val, &pluto->io_mem[reg]);
  125. }
  126. static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits)
  127. {
  128. u32 val = readl(&pluto->io_mem[reg]);
  129. val &= ~mask;
  130. val |= bits;
  131. writel(val, &pluto->io_mem[reg]);
  132. }
  133. static void pluto_write_tscr(struct pluto *pluto, u32 val)
  134. {
  135. /* set the number of packets */
  136. val &= ~TSCR_ADEF;
  137. val |= TS_DMA_PACKETS / 2;
  138. pluto_writereg(pluto, REG_TSCR, val);
  139. }
  140. static void pluto_setsda(void *data, int state)
  141. {
  142. struct pluto *pluto = data;
  143. if (state)
  144. pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA);
  145. else
  146. pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0);
  147. }
  148. static void pluto_setscl(void *data, int state)
  149. {
  150. struct pluto *pluto = data;
  151. if (state)
  152. pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL);
  153. else
  154. pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0);
  155. /* try to detect i2c_inb() to workaround hardware bug:
  156. * reset SDA to high after SCL has been set to low */
  157. if ((state) && (pluto->i2cbug == 0)) {
  158. pluto->i2cbug = 1;
  159. } else {
  160. if ((!state) && (pluto->i2cbug == 1))
  161. pluto_setsda(pluto, 1);
  162. pluto->i2cbug = 0;
  163. }
  164. }
  165. static int pluto_getsda(void *data)
  166. {
  167. struct pluto *pluto = data;
  168. return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA;
  169. }
  170. static int pluto_getscl(void *data)
  171. {
  172. struct pluto *pluto = data;
  173. return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL;
  174. }
  175. static void pluto_reset_frontend(struct pluto *pluto, int reenable)
  176. {
  177. u32 val = pluto_readreg(pluto, REG_MISC);
  178. if (val & MISC_FRST) {
  179. val &= ~MISC_FRST;
  180. pluto_writereg(pluto, REG_MISC, val);
  181. }
  182. if (reenable) {
  183. val |= MISC_FRST;
  184. pluto_writereg(pluto, REG_MISC, val);
  185. }
  186. }
  187. static void pluto_reset_ts(struct pluto *pluto, int reenable)
  188. {
  189. u32 val = pluto_readreg(pluto, REG_TSCR);
  190. if (val & TSCR_RSTN) {
  191. val &= ~TSCR_RSTN;
  192. pluto_write_tscr(pluto, val);
  193. }
  194. if (reenable) {
  195. val |= TSCR_RSTN;
  196. pluto_write_tscr(pluto, val);
  197. }
  198. }
  199. static void pluto_set_dma_addr(struct pluto *pluto)
  200. {
  201. pluto_writereg(pluto, REG_PCAR, pluto->dma_addr);
  202. }
  203. static int __devinit pluto_dma_map(struct pluto *pluto)
  204. {
  205. pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
  206. TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
  207. return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr);
  208. }
  209. static void pluto_dma_unmap(struct pluto *pluto)
  210. {
  211. pci_unmap_single(pluto->pdev, pluto->dma_addr,
  212. TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
  213. }
  214. static int pluto_start_feed(struct dvb_demux_feed *f)
  215. {
  216. struct pluto *pluto = feed_to_pluto(f);
  217. /* enable PID filtering */
  218. if (pluto->users++ == 0)
  219. pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0);
  220. if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
  221. pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid);
  222. else if (pluto->full_ts_users++ == 0)
  223. pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL);
  224. return 0;
  225. }
  226. static int pluto_stop_feed(struct dvb_demux_feed *f)
  227. {
  228. struct pluto *pluto = feed_to_pluto(f);
  229. /* disable PID filtering */
  230. if (--pluto->users == 0)
  231. pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL);
  232. if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
  233. pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff);
  234. else if (--pluto->full_ts_users == 0)
  235. pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0);
  236. return 0;
  237. }
  238. static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
  239. {
  240. /* synchronize the DMA transfer with the CPU
  241. * first so that we see updated contents. */
  242. pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr,
  243. TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
  244. /* Workaround for broken hardware:
  245. * [1] On startup NBPACKETS seems to contain an uninitialized value,
  246. * but no packets have been transfered.
  247. * [2] Sometimes (actually very often) NBPACKETS stays at zero
  248. * although one packet has been transfered.
  249. * [3] Sometimes (actually rarely), the card gets into an erroneous
  250. * mode where it continuously generates interrupts, claiming it
  251. * has recieved nbpackets>TS_DMA_PACKETS packets, but no packet
  252. * has been transfered. Only a reset seems to solve this
  253. */
  254. if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
  255. unsigned int i = 0;
  256. while (pluto->dma_buf[i] == 0x47)
  257. i += 188;
  258. nbpackets = i / 188;
  259. if (i == 0) {
  260. pluto_reset_ts(pluto, 1);
  261. dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n");
  262. }
  263. }
  264. dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets);
  265. /* clear the dma buffer. this is needed to be able to identify
  266. * new valid ts packets above */
  267. memset(pluto->dma_buf, 0, nbpackets * 188);
  268. /* reset the dma address */
  269. pluto_set_dma_addr(pluto);
  270. /* sync the buffer and give it back to the card */
  271. pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr,
  272. TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
  273. }
  274. static irqreturn_t pluto_irq(int irq, void *dev_id)
  275. {
  276. struct pluto *pluto = dev_id;
  277. u32 tscr;
  278. /* check whether an interrupt occured on this device */
  279. tscr = pluto_readreg(pluto, REG_TSCR);
  280. if (!(tscr & (TSCR_DE | TSCR_OVR)))
  281. return IRQ_NONE;
  282. if (tscr == 0xffffffff) {
  283. if (pluto->dead == 0)
  284. dev_err(&pluto->pdev->dev, "card has hung or been ejected.\n");
  285. /* It's dead Jim */
  286. pluto->dead = 1;
  287. return IRQ_HANDLED;
  288. }
  289. /* dma end interrupt */
  290. if (tscr & TSCR_DE) {
  291. pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24);
  292. /* overflow interrupt */
  293. if (tscr & TSCR_OVR)
  294. pluto->overflow++;
  295. if (pluto->overflow) {
  296. dev_err(&pluto->pdev->dev, "overflow irq (%d)\n",
  297. pluto->overflow);
  298. pluto_reset_ts(pluto, 1);
  299. pluto->overflow = 0;
  300. }
  301. } else if (tscr & TSCR_OVR) {
  302. pluto->overflow++;
  303. }
  304. /* ACK the interrupt */
  305. pluto_write_tscr(pluto, tscr | TSCR_IACK);
  306. return IRQ_HANDLED;
  307. }
  308. static void __devinit pluto_enable_irqs(struct pluto *pluto)
  309. {
  310. u32 val = pluto_readreg(pluto, REG_TSCR);
  311. /* disable AFUL and LOCK interrupts */
  312. val |= (TSCR_MSKA | TSCR_MSKL);
  313. /* enable DMA and OVERFLOW interrupts */
  314. val &= ~(TSCR_DEM | TSCR_MSKO);
  315. /* clear pending interrupts */
  316. val |= TSCR_IACK;
  317. pluto_write_tscr(pluto, val);
  318. }
  319. static void pluto_disable_irqs(struct pluto *pluto)
  320. {
  321. u32 val = pluto_readreg(pluto, REG_TSCR);
  322. /* disable all interrupts */
  323. val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL);
  324. /* clear pending interrupts */
  325. val |= TSCR_IACK;
  326. pluto_write_tscr(pluto, val);
  327. }
  328. static int __devinit pluto_hw_init(struct pluto *pluto)
  329. {
  330. pluto_reset_frontend(pluto, 1);
  331. /* set automatic LED control by FPGA */
  332. pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED);
  333. /* set data endianess */
  334. #ifdef __LITTLE_ENDIAN
  335. pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END);
  336. #else
  337. pluto_rw(pluto, REG_PIDn(0), PID0_END, 0);
  338. #endif
  339. /* map DMA and set address */
  340. pluto_dma_map(pluto);
  341. pluto_set_dma_addr(pluto);
  342. /* enable interrupts */
  343. pluto_enable_irqs(pluto);
  344. /* reset TS logic */
  345. pluto_reset_ts(pluto, 1);
  346. return 0;
  347. }
  348. static void pluto_hw_exit(struct pluto *pluto)
  349. {
  350. /* disable interrupts */
  351. pluto_disable_irqs(pluto);
  352. pluto_reset_ts(pluto, 0);
  353. /* LED: disable automatic control, enable yellow, disable green */
  354. pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1);
  355. /* unmap DMA */
  356. pluto_dma_unmap(pluto);
  357. pluto_reset_frontend(pluto, 0);
  358. }
  359. static inline u32 divide(u32 numerator, u32 denominator)
  360. {
  361. if (denominator == 0)
  362. return ~0;
  363. return DIV_ROUND_CLOSEST(numerator, denominator);
  364. }
  365. /* LG Innotek TDTE-E001P (Infineon TUA6034) */
  366. static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe,
  367. struct dvb_frontend_parameters *p)
  368. {
  369. struct pluto *pluto = frontend_to_pluto(fe);
  370. struct i2c_msg msg;
  371. int ret;
  372. u8 buf[4];
  373. u32 div;
  374. // Fref = 166.667 Hz
  375. // Fref * 3 = 500.000 Hz
  376. // IF = 36166667
  377. // IF / Fref = 217
  378. //div = divide(p->frequency + 36166667, 166667);
  379. div = divide(p->frequency * 3, 500000) + 217;
  380. buf[0] = (div >> 8) & 0x7f;
  381. buf[1] = (div >> 0) & 0xff;
  382. if (p->frequency < 611000000)
  383. buf[2] = 0xb4;
  384. else if (p->frequency < 811000000)
  385. buf[2] = 0xbc;
  386. else
  387. buf[2] = 0xf4;
  388. // VHF: 174-230 MHz
  389. // center: 350 MHz
  390. // UHF: 470-862 MHz
  391. if (p->frequency < 350000000)
  392. buf[3] = 0x02;
  393. else
  394. buf[3] = 0x04;
  395. if (p->u.ofdm.bandwidth == BANDWIDTH_8_MHZ)
  396. buf[3] |= 0x08;
  397. if (sizeof(buf) == 6) {
  398. buf[4] = buf[2];
  399. buf[4] &= ~0x1c;
  400. buf[4] |= 0x18;
  401. buf[5] = (0 << 7) | (2 << 4);
  402. }
  403. msg.addr = I2C_ADDR_TUA6034 >> 1;
  404. msg.flags = 0;
  405. msg.buf = buf;
  406. msg.len = sizeof(buf);
  407. if (fe->ops.i2c_gate_ctrl)
  408. fe->ops.i2c_gate_ctrl(fe, 1);
  409. ret = i2c_transfer(&pluto->i2c_adap, &msg, 1);
  410. if (ret < 0)
  411. return ret;
  412. else if (ret == 0)
  413. return -EREMOTEIO;
  414. return 0;
  415. }
  416. static int pluto2_request_firmware(struct dvb_frontend *fe,
  417. const struct firmware **fw, char *name)
  418. {
  419. struct pluto *pluto = frontend_to_pluto(fe);
  420. return request_firmware(fw, name, &pluto->pdev->dev);
  421. }
  422. static struct tda1004x_config pluto2_fe_config __devinitdata = {
  423. .demod_address = I2C_ADDR_TDA10046 >> 1,
  424. .invert = 1,
  425. .invert_oclk = 0,
  426. .xtal_freq = TDA10046_XTAL_16M,
  427. .agc_config = TDA10046_AGC_DEFAULT,
  428. .if_freq = TDA10046_FREQ_3617,
  429. .request_firmware = pluto2_request_firmware,
  430. };
  431. static int __devinit frontend_init(struct pluto *pluto)
  432. {
  433. int ret;
  434. pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap);
  435. if (!pluto->fe) {
  436. dev_err(&pluto->pdev->dev, "could not attach frontend\n");
  437. return -ENODEV;
  438. }
  439. pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params;
  440. ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe);
  441. if (ret < 0) {
  442. if (pluto->fe->ops.release)
  443. pluto->fe->ops.release(pluto->fe);
  444. return ret;
  445. }
  446. return 0;
  447. }
  448. static void __devinit pluto_read_rev(struct pluto *pluto)
  449. {
  450. u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR;
  451. dev_info(&pluto->pdev->dev, "board revision %d.%d\n",
  452. (val >> 12) & 0x0f, (val >> 4) & 0xff);
  453. }
  454. static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac)
  455. {
  456. u32 val = pluto_readreg(pluto, REG_MMAC);
  457. mac[0] = (val >> 8) & 0xff;
  458. mac[1] = (val >> 0) & 0xff;
  459. val = pluto_readreg(pluto, REG_IMAC);
  460. mac[2] = (val >> 8) & 0xff;
  461. mac[3] = (val >> 0) & 0xff;
  462. val = pluto_readreg(pluto, REG_LMAC);
  463. mac[4] = (val >> 8) & 0xff;
  464. mac[5] = (val >> 0) & 0xff;
  465. dev_info(&pluto->pdev->dev, "MAC %pM\n", mac);
  466. }
  467. static int __devinit pluto_read_serial(struct pluto *pluto)
  468. {
  469. struct pci_dev *pdev = pluto->pdev;
  470. unsigned int i, j;
  471. u8 __iomem *cis;
  472. cis = pci_iomap(pdev, 1, 0);
  473. if (!cis)
  474. return -EIO;
  475. dev_info(&pdev->dev, "S/N ");
  476. for (i = 0xe0; i < 0x100; i += 4) {
  477. u32 val = readl(&cis[i]);
  478. for (j = 0; j < 32; j += 8) {
  479. if ((val & 0xff) == 0xff)
  480. goto out;
  481. printk("%c", val & 0xff);
  482. val >>= 8;
  483. }
  484. }
  485. out:
  486. printk("\n");
  487. pci_iounmap(pdev, cis);
  488. return 0;
  489. }
  490. static int __devinit pluto2_probe(struct pci_dev *pdev,
  491. const struct pci_device_id *ent)
  492. {
  493. struct pluto *pluto;
  494. struct dvb_adapter *dvb_adapter;
  495. struct dvb_demux *dvbdemux;
  496. struct dmx_demux *dmx;
  497. int ret = -ENOMEM;
  498. pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL);
  499. if (!pluto)
  500. goto out;
  501. pluto->pdev = pdev;
  502. ret = pci_enable_device(pdev);
  503. if (ret < 0)
  504. goto err_kfree;
  505. /* enable interrupts */
  506. pci_write_config_dword(pdev, 0x6c, 0x8000);
  507. ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
  508. if (ret < 0)
  509. goto err_pci_disable_device;
  510. pci_set_master(pdev);
  511. ret = pci_request_regions(pdev, DRIVER_NAME);
  512. if (ret < 0)
  513. goto err_pci_disable_device;
  514. pluto->io_mem = pci_iomap(pdev, 0, 0x40);
  515. if (!pluto->io_mem) {
  516. ret = -EIO;
  517. goto err_pci_release_regions;
  518. }
  519. pci_set_drvdata(pdev, pluto);
  520. ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto);
  521. if (ret < 0)
  522. goto err_pci_iounmap;
  523. ret = pluto_hw_init(pluto);
  524. if (ret < 0)
  525. goto err_free_irq;
  526. /* i2c */
  527. i2c_set_adapdata(&pluto->i2c_adap, pluto);
  528. strcpy(pluto->i2c_adap.name, DRIVER_NAME);
  529. pluto->i2c_adap.owner = THIS_MODULE;
  530. pluto->i2c_adap.dev.parent = &pdev->dev;
  531. pluto->i2c_adap.algo_data = &pluto->i2c_bit;
  532. pluto->i2c_bit.data = pluto;
  533. pluto->i2c_bit.setsda = pluto_setsda;
  534. pluto->i2c_bit.setscl = pluto_setscl;
  535. pluto->i2c_bit.getsda = pluto_getsda;
  536. pluto->i2c_bit.getscl = pluto_getscl;
  537. pluto->i2c_bit.udelay = 10;
  538. pluto->i2c_bit.timeout = 10;
  539. /* Raise SCL and SDA */
  540. pluto_setsda(pluto, 1);
  541. pluto_setscl(pluto, 1);
  542. ret = i2c_bit_add_bus(&pluto->i2c_adap);
  543. if (ret < 0)
  544. goto err_pluto_hw_exit;
  545. /* dvb */
  546. ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME,
  547. THIS_MODULE, &pdev->dev, adapter_nr);
  548. if (ret < 0)
  549. goto err_i2c_del_adapter;
  550. dvb_adapter = &pluto->dvb_adapter;
  551. pluto_read_rev(pluto);
  552. pluto_read_serial(pluto);
  553. pluto_read_mac(pluto, dvb_adapter->proposed_mac);
  554. dvbdemux = &pluto->demux;
  555. dvbdemux->filternum = 256;
  556. dvbdemux->feednum = 256;
  557. dvbdemux->start_feed = pluto_start_feed;
  558. dvbdemux->stop_feed = pluto_stop_feed;
  559. dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
  560. DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
  561. ret = dvb_dmx_init(dvbdemux);
  562. if (ret < 0)
  563. goto err_dvb_unregister_adapter;
  564. dmx = &dvbdemux->dmx;
  565. pluto->hw_frontend.source = DMX_FRONTEND_0;
  566. pluto->mem_frontend.source = DMX_MEMORY_FE;
  567. pluto->dmxdev.filternum = NHWFILTERS;
  568. pluto->dmxdev.demux = dmx;
  569. ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter);
  570. if (ret < 0)
  571. goto err_dvb_dmx_release;
  572. ret = dmx->add_frontend(dmx, &pluto->hw_frontend);
  573. if (ret < 0)
  574. goto err_dvb_dmxdev_release;
  575. ret = dmx->add_frontend(dmx, &pluto->mem_frontend);
  576. if (ret < 0)
  577. goto err_remove_hw_frontend;
  578. ret = dmx->connect_frontend(dmx, &pluto->hw_frontend);
  579. if (ret < 0)
  580. goto err_remove_mem_frontend;
  581. ret = frontend_init(pluto);
  582. if (ret < 0)
  583. goto err_disconnect_frontend;
  584. dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx);
  585. out:
  586. return ret;
  587. err_disconnect_frontend:
  588. dmx->disconnect_frontend(dmx);
  589. err_remove_mem_frontend:
  590. dmx->remove_frontend(dmx, &pluto->mem_frontend);
  591. err_remove_hw_frontend:
  592. dmx->remove_frontend(dmx, &pluto->hw_frontend);
  593. err_dvb_dmxdev_release:
  594. dvb_dmxdev_release(&pluto->dmxdev);
  595. err_dvb_dmx_release:
  596. dvb_dmx_release(dvbdemux);
  597. err_dvb_unregister_adapter:
  598. dvb_unregister_adapter(dvb_adapter);
  599. err_i2c_del_adapter:
  600. i2c_del_adapter(&pluto->i2c_adap);
  601. err_pluto_hw_exit:
  602. pluto_hw_exit(pluto);
  603. err_free_irq:
  604. free_irq(pdev->irq, pluto);
  605. err_pci_iounmap:
  606. pci_iounmap(pdev, pluto->io_mem);
  607. err_pci_release_regions:
  608. pci_release_regions(pdev);
  609. err_pci_disable_device:
  610. pci_disable_device(pdev);
  611. err_kfree:
  612. pci_set_drvdata(pdev, NULL);
  613. kfree(pluto);
  614. goto out;
  615. }
  616. static void __devexit pluto2_remove(struct pci_dev *pdev)
  617. {
  618. struct pluto *pluto = pci_get_drvdata(pdev);
  619. struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter;
  620. struct dvb_demux *dvbdemux = &pluto->demux;
  621. struct dmx_demux *dmx = &dvbdemux->dmx;
  622. dmx->close(dmx);
  623. dvb_net_release(&pluto->dvbnet);
  624. if (pluto->fe)
  625. dvb_unregister_frontend(pluto->fe);
  626. dmx->disconnect_frontend(dmx);
  627. dmx->remove_frontend(dmx, &pluto->mem_frontend);
  628. dmx->remove_frontend(dmx, &pluto->hw_frontend);
  629. dvb_dmxdev_release(&pluto->dmxdev);
  630. dvb_dmx_release(dvbdemux);
  631. dvb_unregister_adapter(dvb_adapter);
  632. i2c_del_adapter(&pluto->i2c_adap);
  633. pluto_hw_exit(pluto);
  634. free_irq(pdev->irq, pluto);
  635. pci_iounmap(pdev, pluto->io_mem);
  636. pci_release_regions(pdev);
  637. pci_disable_device(pdev);
  638. pci_set_drvdata(pdev, NULL);
  639. kfree(pluto);
  640. }
  641. #ifndef PCI_VENDOR_ID_SCM
  642. #define PCI_VENDOR_ID_SCM 0x0432
  643. #endif
  644. #ifndef PCI_DEVICE_ID_PLUTO2
  645. #define PCI_DEVICE_ID_PLUTO2 0x0001
  646. #endif
  647. static struct pci_device_id pluto2_id_table[] __devinitdata = {
  648. {
  649. .vendor = PCI_VENDOR_ID_SCM,
  650. .device = PCI_DEVICE_ID_PLUTO2,
  651. .subvendor = PCI_ANY_ID,
  652. .subdevice = PCI_ANY_ID,
  653. }, {
  654. /* empty */
  655. },
  656. };
  657. MODULE_DEVICE_TABLE(pci, pluto2_id_table);
  658. static struct pci_driver pluto2_driver = {
  659. .name = DRIVER_NAME,
  660. .id_table = pluto2_id_table,
  661. .probe = pluto2_probe,
  662. .remove = __devexit_p(pluto2_remove),
  663. };
  664. static int __init pluto2_init(void)
  665. {
  666. return pci_register_driver(&pluto2_driver);
  667. }
  668. static void __exit pluto2_exit(void)
  669. {
  670. pci_unregister_driver(&pluto2_driver);
  671. }
  672. module_init(pluto2_init);
  673. module_exit(pluto2_exit);
  674. MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
  675. MODULE_DESCRIPTION("Pluto2 driver");
  676. MODULE_LICENSE("GPL");