iwl-core.h 15 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396
  1. /******************************************************************************
  2. *
  3. * This file is provided under a dual BSD/GPLv2 license. When using or
  4. * redistributing this file, you may do so under either license.
  5. *
  6. * GPL LICENSE SUMMARY
  7. *
  8. * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
  9. *
  10. * This program is free software; you can redistribute it and/or modify
  11. * it under the terms of version 2 of the GNU General Public License as
  12. * published by the Free Software Foundation.
  13. *
  14. * This program is distributed in the hope that it will be useful, but
  15. * WITHOUT ANY WARRANTY; without even the implied warranty of
  16. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  17. * General Public License for more details.
  18. *
  19. * You should have received a copy of the GNU General Public License
  20. * along with this program; if not, write to the Free Software
  21. * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  22. * USA
  23. *
  24. * The full GNU General Public License is included in this distribution
  25. * in the file called LICENSE.GPL.
  26. *
  27. * Contact Information:
  28. * Intel Linux Wireless <ilw@linux.intel.com>
  29. * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  30. *
  31. * BSD LICENSE
  32. *
  33. * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
  34. * All rights reserved.
  35. *
  36. * Redistribution and use in source and binary forms, with or without
  37. * modification, are permitted provided that the following conditions
  38. * are met:
  39. *
  40. * * Redistributions of source code must retain the above copyright
  41. * notice, this list of conditions and the following disclaimer.
  42. * * Redistributions in binary form must reproduce the above copyright
  43. * notice, this list of conditions and the following disclaimer in
  44. * the documentation and/or other materials provided with the
  45. * distribution.
  46. * * Neither the name Intel Corporation nor the names of its
  47. * contributors may be used to endorse or promote products derived
  48. * from this software without specific prior written permission.
  49. *
  50. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  51. * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  52. * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  53. * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  54. * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  55. * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  56. * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  57. * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  58. * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  59. * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  60. * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  61. *****************************************************************************/
  62. #ifndef __iwl_core_h__
  63. #define __iwl_core_h__
  64. #include "iwl-dev.h"
  65. #include "iwl-io.h"
  66. /************************
  67. * forward declarations *
  68. ************************/
  69. struct iwl_host_cmd;
  70. struct iwl_cmd;
  71. #define TIME_UNIT 1024
  72. struct iwl_lib_ops {
  73. /* set hw dependent parameters */
  74. int (*set_hw_params)(struct iwl_priv *priv);
  75. /* setup BT Rx handler */
  76. void (*bt_rx_handler_setup)(struct iwl_priv *priv);
  77. /* setup BT related deferred work */
  78. void (*bt_setup_deferred_work)(struct iwl_priv *priv);
  79. /* cancel deferred work */
  80. void (*cancel_deferred_work)(struct iwl_priv *priv);
  81. int (*set_channel_switch)(struct iwl_priv *priv,
  82. struct ieee80211_channel_switch *ch_switch);
  83. /* device specific configuration */
  84. void (*nic_config)(struct iwl_priv *priv);
  85. /* eeprom operations (as defined in iwl-eeprom.h) */
  86. struct iwl_eeprom_ops eeprom_ops;
  87. /* temperature */
  88. void (*temperature)(struct iwl_priv *priv);
  89. };
  90. /*
  91. * @max_ll_items: max number of OTP blocks
  92. * @shadow_ram_support: shadow support for OTP memory
  93. * @led_compensation: compensate on the led on/off time per HW according
  94. * to the deviation to achieve the desired led frequency.
  95. * The detail algorithm is described in iwl-led.c
  96. * @chain_noise_num_beacons: number of beacons used to compute chain noise
  97. * @adv_thermal_throttle: support advance thermal throttle
  98. * @support_ct_kill_exit: support ct kill exit condition
  99. * @support_wimax_coexist: support wimax/wifi co-exist
  100. * @plcp_delta_threshold: plcp error rate threshold used to trigger
  101. * radio tuning when there is a high receiving plcp error rate
  102. * @chain_noise_scale: default chain noise scale used for gain computation
  103. * @wd_timeout: TX queues watchdog timeout
  104. * @max_event_log_size: size of event log buffer size for ucode event logging
  105. * @shadow_reg_enable: HW shadhow register bit
  106. * @no_idle_support: do not support idle mode
  107. * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
  108. * wd_disable: disable watchdog timer
  109. */
  110. struct iwl_base_params {
  111. int eeprom_size;
  112. int num_of_queues; /* def: HW dependent */
  113. int num_of_ampdu_queues;/* def: HW dependent */
  114. /* for iwl_apm_init() */
  115. u32 pll_cfg_val;
  116. const u16 max_ll_items;
  117. const bool shadow_ram_support;
  118. u16 led_compensation;
  119. bool adv_thermal_throttle;
  120. bool support_ct_kill_exit;
  121. const bool support_wimax_coexist;
  122. u8 plcp_delta_threshold;
  123. s32 chain_noise_scale;
  124. unsigned int wd_timeout;
  125. u32 max_event_log_size;
  126. const bool shadow_reg_enable;
  127. const bool no_idle_support;
  128. const bool hd_v2;
  129. const bool wd_disable;
  130. };
  131. /*
  132. * @advanced_bt_coexist: support advanced bt coexist
  133. * @bt_init_traffic_load: specify initial bt traffic load
  134. * @bt_prio_boost: default bt priority boost value
  135. * @agg_time_limit: maximum number of uSec in aggregation
  136. * @ampdu_factor: Maximum A-MPDU length factor
  137. * @ampdu_density: Minimum A-MPDU spacing
  138. * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
  139. */
  140. struct iwl_bt_params {
  141. bool advanced_bt_coexist;
  142. u8 bt_init_traffic_load;
  143. u8 bt_prio_boost;
  144. u16 agg_time_limit;
  145. u8 ampdu_factor;
  146. u8 ampdu_density;
  147. bool bt_sco_disable;
  148. bool bt_session_2;
  149. };
  150. /*
  151. * @use_rts_for_aggregation: use rts/cts protection for HT traffic
  152. */
  153. struct iwl_ht_params {
  154. const bool ht_greenfield_support; /* if used set to true */
  155. bool use_rts_for_aggregation;
  156. enum ieee80211_smps_mode smps_mode;
  157. };
  158. /**
  159. * struct iwl_cfg
  160. * @name: Offical name of the device
  161. * @fw_name_pre: Firmware filename prefix. The api version and extension
  162. * (.ucode) will be added to filename before loading from disk. The
  163. * filename is constructed as fw_name_pre<api>.ucode.
  164. * @ucode_api_max: Highest version of uCode API supported by driver.
  165. * @ucode_api_ok: oldest version of the uCode API that is OK to load
  166. * without a warning, for use in transitions
  167. * @ucode_api_min: Lowest version of uCode API supported by driver.
  168. * @valid_tx_ant: valid transmit antenna
  169. * @valid_rx_ant: valid receive antenna
  170. * @sku: sku information from EEPROM
  171. * @eeprom_ver: EEPROM version
  172. * @eeprom_calib_ver: EEPROM calibration version
  173. * @lib: pointer to the lib ops
  174. * @additional_nic_config: additional nic configuration
  175. * @base_params: pointer to basic parameters
  176. * @ht_params: point to ht patameters
  177. * @bt_params: pointer to bt parameters
  178. * @pa_type: used by 6000 series only to identify the type of Power Amplifier
  179. * @need_dc_calib: need to perform init dc calibration
  180. * @need_temp_offset_calib: need to perform temperature offset calibration
  181. * @scan_antennas: available antenna for scan operation
  182. * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
  183. * @adv_pm: advance power management
  184. * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
  185. * @internal_wimax_coex: internal wifi/wimax combo device
  186. * @iq_invert: I/Q inversion
  187. * @temp_offset_v2: support v2 of temperature offset calibration
  188. *
  189. * We enable the driver to be backward compatible wrt API version. The
  190. * driver specifies which APIs it supports (with @ucode_api_max being the
  191. * highest and @ucode_api_min the lowest). Firmware will only be loaded if
  192. * it has a supported API version.
  193. *
  194. * The ideal usage of this infrastructure is to treat a new ucode API
  195. * release as a new hardware revision.
  196. */
  197. struct iwl_cfg {
  198. /* params specific to an individual device within a device family */
  199. const char *name;
  200. const char *fw_name_pre;
  201. const unsigned int ucode_api_max;
  202. const unsigned int ucode_api_ok;
  203. const unsigned int ucode_api_min;
  204. u8 valid_tx_ant;
  205. u8 valid_rx_ant;
  206. u16 sku;
  207. u16 eeprom_ver;
  208. u16 eeprom_calib_ver;
  209. const struct iwl_lib_ops *lib;
  210. void (*additional_nic_config)(struct iwl_priv *priv);
  211. /* params not likely to change within a device family */
  212. struct iwl_base_params *base_params;
  213. /* params likely to change within a device family */
  214. struct iwl_ht_params *ht_params;
  215. struct iwl_bt_params *bt_params;
  216. enum iwl_pa_type pa_type; /* if used set to IWL_PA_SYSTEM */
  217. const bool need_dc_calib; /* if used set to true */
  218. const bool need_temp_offset_calib; /* if used set to true */
  219. u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
  220. enum iwl_led_mode led_mode;
  221. const bool adv_pm;
  222. const bool rx_with_siso_diversity;
  223. const bool internal_wimax_coex;
  224. const bool iq_invert;
  225. const bool temp_offset_v2;
  226. };
  227. /***************************
  228. * L i b *
  229. ***************************/
  230. int iwlagn_mac_conf_tx(struct ieee80211_hw *hw,
  231. struct ieee80211_vif *vif, u16 queue,
  232. const struct ieee80211_tx_queue_params *params);
  233. int iwlagn_mac_tx_last_beacon(struct ieee80211_hw *hw);
  234. void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
  235. int hw_decrypt);
  236. int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
  237. int iwl_full_rxon_required(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
  238. int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch,
  239. struct iwl_rxon_context *ctx);
  240. void iwl_set_flags_for_band(struct iwl_priv *priv,
  241. struct iwl_rxon_context *ctx,
  242. enum ieee80211_band band,
  243. struct ieee80211_vif *vif);
  244. u8 iwl_get_single_channel_number(struct iwl_priv *priv,
  245. enum ieee80211_band band);
  246. void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
  247. bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
  248. struct iwl_rxon_context *ctx,
  249. struct ieee80211_sta_ht_cap *ht_cap);
  250. void iwl_connection_init_rx_config(struct iwl_priv *priv,
  251. struct iwl_rxon_context *ctx);
  252. void iwl_set_rate(struct iwl_priv *priv);
  253. int iwlagn_mac_add_interface(struct ieee80211_hw *hw,
  254. struct ieee80211_vif *vif);
  255. void iwlagn_mac_remove_interface(struct ieee80211_hw *hw,
  256. struct ieee80211_vif *vif);
  257. int iwlagn_mac_change_interface(struct ieee80211_hw *hw,
  258. struct ieee80211_vif *vif,
  259. enum nl80211_iftype newtype, bool newp2p);
  260. int iwl_cmd_echo_test(struct iwl_priv *priv);
  261. #ifdef CONFIG_IWLWIFI_DEBUGFS
  262. int iwl_alloc_traffic_mem(struct iwl_priv *priv);
  263. void iwl_free_traffic_mem(struct iwl_priv *priv);
  264. void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
  265. u16 length, struct ieee80211_hdr *header);
  266. void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
  267. u16 length, struct ieee80211_hdr *header);
  268. const char *get_mgmt_string(int cmd);
  269. const char *get_ctrl_string(int cmd);
  270. void iwl_clear_traffic_stats(struct iwl_priv *priv);
  271. void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc,
  272. u16 len);
  273. #else
  274. static inline int iwl_alloc_traffic_mem(struct iwl_priv *priv)
  275. {
  276. return 0;
  277. }
  278. static inline void iwl_free_traffic_mem(struct iwl_priv *priv)
  279. {
  280. }
  281. static inline void iwl_reset_traffic_log(struct iwl_priv *priv)
  282. {
  283. }
  284. static inline void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
  285. u16 length, struct ieee80211_hdr *header)
  286. {
  287. }
  288. static inline void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
  289. u16 length, struct ieee80211_hdr *header)
  290. {
  291. }
  292. static inline void iwl_update_stats(struct iwl_priv *priv, bool is_tx,
  293. __le16 fc, u16 len)
  294. {
  295. }
  296. #endif
  297. /*****************************************************
  298. * RX
  299. ******************************************************/
  300. void iwl_chswitch_done(struct iwl_priv *priv, bool is_success);
  301. void iwl_setup_watchdog(struct iwl_priv *priv);
  302. /*****************************************************
  303. * TX power
  304. ****************************************************/
  305. int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force);
  306. /*******************************************************************************
  307. * Scanning
  308. ******************************************************************************/
  309. void iwl_init_scan_params(struct iwl_priv *priv);
  310. int iwl_scan_cancel(struct iwl_priv *priv);
  311. void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
  312. void iwl_force_scan_end(struct iwl_priv *priv);
  313. int iwlagn_mac_hw_scan(struct ieee80211_hw *hw,
  314. struct ieee80211_vif *vif,
  315. struct cfg80211_scan_request *req);
  316. void iwl_internal_short_hw_scan(struct iwl_priv *priv);
  317. int iwl_force_reset(struct iwl_priv *priv, int mode, bool external);
  318. u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
  319. const u8 *ta, const u8 *ie, int ie_len, int left);
  320. void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
  321. void iwl_setup_scan_deferred_work(struct iwl_priv *priv);
  322. void iwl_cancel_scan_deferred_work(struct iwl_priv *priv);
  323. int __must_check iwl_scan_initiate(struct iwl_priv *priv,
  324. struct ieee80211_vif *vif,
  325. enum iwl_scan_type scan_type,
  326. enum ieee80211_band band);
  327. /* For faster active scanning, scan will move to the next channel if fewer than
  328. * PLCP_QUIET_THRESH packets are heard on this channel within
  329. * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
  330. * time if it's a quiet channel (nothing responded to our probe, and there's
  331. * no other traffic).
  332. * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
  333. #define IWL_ACTIVE_QUIET_TIME cpu_to_le16(10) /* msec */
  334. #define IWL_PLCP_QUIET_THRESH cpu_to_le16(1) /* packets */
  335. #define IWL_SCAN_CHECK_WATCHDOG (HZ * 7)
  336. /*****************************************************
  337. * S e n d i n g H o s t C o m m a n d s *
  338. *****************************************************/
  339. void iwl_bg_watchdog(unsigned long data);
  340. u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval);
  341. __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
  342. u32 addon, u32 beacon_interval);
  343. /*****************************************************
  344. * GEOS
  345. ******************************************************/
  346. int iwl_init_geos(struct iwl_priv *priv);
  347. void iwl_free_geos(struct iwl_priv *priv);
  348. extern void iwl_send_bt_config(struct iwl_priv *priv);
  349. extern int iwl_send_statistics_request(struct iwl_priv *priv,
  350. u8 flags, bool clear);
  351. int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
  352. static inline const struct ieee80211_supported_band *iwl_get_hw_mode(
  353. struct iwl_priv *priv, enum ieee80211_band band)
  354. {
  355. return priv->hw->wiphy->bands[band];
  356. }
  357. static inline bool iwl_advanced_bt_coexist(struct iwl_priv *priv)
  358. {
  359. return priv->cfg->bt_params &&
  360. priv->cfg->bt_params->advanced_bt_coexist;
  361. }
  362. static inline void iwl_enable_rfkill_int(struct iwl_priv *priv)
  363. {
  364. IWL_DEBUG_ISR(priv, "Enabling rfkill interrupt\n");
  365. iwl_write32(bus(priv), CSR_INT_MASK, CSR_INT_BIT_RF_KILL);
  366. }
  367. extern bool bt_siso_mode;
  368. #endif /* __iwl_core_h__ */