sdhci-esdhc-imx.c 17 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613
  1. /*
  2. * Freescale eSDHC i.MX controller driver for the platform bus.
  3. *
  4. * derived from the OF-version.
  5. *
  6. * Copyright (c) 2010 Pengutronix e.K.
  7. * Author: Wolfram Sang <w.sang@pengutronix.de>
  8. *
  9. * This program is free software; you can redistribute it and/or modify
  10. * it under the terms of the GNU General Public License as published by
  11. * the Free Software Foundation; either version 2 of the License.
  12. */
  13. #include <linux/io.h>
  14. #include <linux/delay.h>
  15. #include <linux/err.h>
  16. #include <linux/clk.h>
  17. #include <linux/gpio.h>
  18. #include <linux/module.h>
  19. #include <linux/slab.h>
  20. #include <linux/mmc/host.h>
  21. #include <linux/mmc/mmc.h>
  22. #include <linux/mmc/sdio.h>
  23. #include <linux/of.h>
  24. #include <linux/of_device.h>
  25. #include <linux/of_gpio.h>
  26. #include <mach/esdhc.h>
  27. #include "sdhci-pltfm.h"
  28. #include "sdhci-esdhc.h"
  29. #define SDHCI_CTRL_D3CD 0x08
  30. /* VENDOR SPEC register */
  31. #define SDHCI_VENDOR_SPEC 0xC0
  32. #define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
  33. #define SDHCI_WTMK_LVL 0x44
  34. #define SDHCI_MIX_CTRL 0x48
  35. /*
  36. * There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC:
  37. * Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design,
  38. * but bit28 is used as the INT DMA ERR in fsl eSDHC design.
  39. * Define this macro DMA error INT for fsl eSDHC
  40. */
  41. #define SDHCI_INT_VENDOR_SPEC_DMA_ERR 0x10000000
  42. /*
  43. * The CMDTYPE of the CMD register (offset 0xE) should be set to
  44. * "11" when the STOP CMD12 is issued on imx53 to abort one
  45. * open ended multi-blk IO. Otherwise the TC INT wouldn't
  46. * be generated.
  47. * In exact block transfer, the controller doesn't complete the
  48. * operations automatically as required at the end of the
  49. * transfer and remains on hold if the abort command is not sent.
  50. * As a result, the TC flag is not asserted and SW received timeout
  51. * exeception. Bit1 of Vendor Spec registor is used to fix it.
  52. */
  53. #define ESDHC_FLAG_MULTIBLK_NO_INT (1 << 1)
  54. enum imx_esdhc_type {
  55. IMX25_ESDHC,
  56. IMX35_ESDHC,
  57. IMX51_ESDHC,
  58. IMX53_ESDHC,
  59. IMX6Q_USDHC,
  60. };
  61. struct pltfm_imx_data {
  62. int flags;
  63. u32 scratchpad;
  64. enum imx_esdhc_type devtype;
  65. struct esdhc_platform_data boarddata;
  66. };
  67. static struct platform_device_id imx_esdhc_devtype[] = {
  68. {
  69. .name = "sdhci-esdhc-imx25",
  70. .driver_data = IMX25_ESDHC,
  71. }, {
  72. .name = "sdhci-esdhc-imx35",
  73. .driver_data = IMX35_ESDHC,
  74. }, {
  75. .name = "sdhci-esdhc-imx51",
  76. .driver_data = IMX51_ESDHC,
  77. }, {
  78. .name = "sdhci-esdhc-imx53",
  79. .driver_data = IMX53_ESDHC,
  80. }, {
  81. .name = "sdhci-usdhc-imx6q",
  82. .driver_data = IMX6Q_USDHC,
  83. }, {
  84. /* sentinel */
  85. }
  86. };
  87. MODULE_DEVICE_TABLE(platform, imx_esdhc_devtype);
  88. static const struct of_device_id imx_esdhc_dt_ids[] = {
  89. { .compatible = "fsl,imx25-esdhc", .data = &imx_esdhc_devtype[IMX25_ESDHC], },
  90. { .compatible = "fsl,imx35-esdhc", .data = &imx_esdhc_devtype[IMX35_ESDHC], },
  91. { .compatible = "fsl,imx51-esdhc", .data = &imx_esdhc_devtype[IMX51_ESDHC], },
  92. { .compatible = "fsl,imx53-esdhc", .data = &imx_esdhc_devtype[IMX53_ESDHC], },
  93. { .compatible = "fsl,imx6q-usdhc", .data = &imx_esdhc_devtype[IMX6Q_USDHC], },
  94. { /* sentinel */ }
  95. };
  96. MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids);
  97. static inline int is_imx25_esdhc(struct pltfm_imx_data *data)
  98. {
  99. return data->devtype == IMX25_ESDHC;
  100. }
  101. static inline int is_imx35_esdhc(struct pltfm_imx_data *data)
  102. {
  103. return data->devtype == IMX35_ESDHC;
  104. }
  105. static inline int is_imx51_esdhc(struct pltfm_imx_data *data)
  106. {
  107. return data->devtype == IMX51_ESDHC;
  108. }
  109. static inline int is_imx53_esdhc(struct pltfm_imx_data *data)
  110. {
  111. return data->devtype == IMX53_ESDHC;
  112. }
  113. static inline int is_imx6q_usdhc(struct pltfm_imx_data *data)
  114. {
  115. return data->devtype == IMX6Q_USDHC;
  116. }
  117. static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
  118. {
  119. void __iomem *base = host->ioaddr + (reg & ~0x3);
  120. u32 shift = (reg & 0x3) * 8;
  121. writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
  122. }
  123. static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
  124. {
  125. struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
  126. struct pltfm_imx_data *imx_data = pltfm_host->priv;
  127. struct esdhc_platform_data *boarddata = &imx_data->boarddata;
  128. /* fake CARD_PRESENT flag */
  129. u32 val = readl(host->ioaddr + reg);
  130. if (unlikely((reg == SDHCI_PRESENT_STATE)
  131. && gpio_is_valid(boarddata->cd_gpio))) {
  132. if (gpio_get_value(boarddata->cd_gpio))
  133. /* no card, if a valid gpio says so... */
  134. val &= ~SDHCI_CARD_PRESENT;
  135. else
  136. /* ... in all other cases assume card is present */
  137. val |= SDHCI_CARD_PRESENT;
  138. }
  139. if (unlikely(reg == SDHCI_CAPABILITIES)) {
  140. /* In FSL esdhc IC module, only bit20 is used to indicate the
  141. * ADMA2 capability of esdhc, but this bit is messed up on
  142. * some SOCs (e.g. on MX25, MX35 this bit is set, but they
  143. * don't actually support ADMA2). So set the BROKEN_ADMA
  144. * uirk on MX25/35 platforms.
  145. */
  146. if (val & SDHCI_CAN_DO_ADMA1) {
  147. val &= ~SDHCI_CAN_DO_ADMA1;
  148. val |= SDHCI_CAN_DO_ADMA2;
  149. }
  150. }
  151. if (unlikely(reg == SDHCI_INT_STATUS)) {
  152. if (val & SDHCI_INT_VENDOR_SPEC_DMA_ERR) {
  153. val &= ~SDHCI_INT_VENDOR_SPEC_DMA_ERR;
  154. val |= SDHCI_INT_ADMA_ERROR;
  155. }
  156. }
  157. return val;
  158. }
  159. static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
  160. {
  161. struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
  162. struct pltfm_imx_data *imx_data = pltfm_host->priv;
  163. struct esdhc_platform_data *boarddata = &imx_data->boarddata;
  164. u32 data;
  165. if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
  166. if (boarddata->cd_type == ESDHC_CD_GPIO)
  167. /*
  168. * These interrupts won't work with a custom
  169. * card_detect gpio (only applied to mx25/35)
  170. */
  171. val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
  172. if (val & SDHCI_INT_CARD_INT) {
  173. /*
  174. * Clear and then set D3CD bit to avoid missing the
  175. * card interrupt. This is a eSDHC controller problem
  176. * so we need to apply the following workaround: clear
  177. * and set D3CD bit will make eSDHC re-sample the card
  178. * interrupt. In case a card interrupt was lost,
  179. * re-sample it by the following steps.
  180. */
  181. data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
  182. data &= ~SDHCI_CTRL_D3CD;
  183. writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
  184. data |= SDHCI_CTRL_D3CD;
  185. writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
  186. }
  187. }
  188. if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
  189. && (reg == SDHCI_INT_STATUS)
  190. && (val & SDHCI_INT_DATA_END))) {
  191. u32 v;
  192. v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
  193. v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
  194. writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
  195. }
  196. if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
  197. if (val & SDHCI_INT_ADMA_ERROR) {
  198. val &= ~SDHCI_INT_ADMA_ERROR;
  199. val |= SDHCI_INT_VENDOR_SPEC_DMA_ERR;
  200. }
  201. }
  202. writel(val, host->ioaddr + reg);
  203. }
  204. static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
  205. {
  206. if (unlikely(reg == SDHCI_HOST_VERSION)) {
  207. u16 val = readw(host->ioaddr + (reg ^ 2));
  208. /*
  209. * uSDHC supports SDHCI v3.0, but it's encoded as value
  210. * 0x3 in host controller version register, which violates
  211. * SDHCI_SPEC_300 definition. Work it around here.
  212. */
  213. if ((val & SDHCI_SPEC_VER_MASK) == 3)
  214. return --val;
  215. }
  216. return readw(host->ioaddr + reg);
  217. }
  218. static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
  219. {
  220. struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
  221. struct pltfm_imx_data *imx_data = pltfm_host->priv;
  222. switch (reg) {
  223. case SDHCI_TRANSFER_MODE:
  224. /*
  225. * Postpone this write, we must do it together with a
  226. * command write that is down below.
  227. */
  228. if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
  229. && (host->cmd->opcode == SD_IO_RW_EXTENDED)
  230. && (host->cmd->data->blocks > 1)
  231. && (host->cmd->data->flags & MMC_DATA_READ)) {
  232. u32 v;
  233. v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
  234. v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
  235. writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
  236. }
  237. imx_data->scratchpad = val;
  238. return;
  239. case SDHCI_COMMAND:
  240. if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
  241. && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
  242. val |= SDHCI_CMD_ABORTCMD;
  243. if (is_imx6q_usdhc(imx_data)) {
  244. u32 m = readl(host->ioaddr + SDHCI_MIX_CTRL);
  245. m = imx_data->scratchpad | (m & 0xffff0000);
  246. writel(m, host->ioaddr + SDHCI_MIX_CTRL);
  247. writel(val << 16,
  248. host->ioaddr + SDHCI_TRANSFER_MODE);
  249. } else {
  250. writel(val << 16 | imx_data->scratchpad,
  251. host->ioaddr + SDHCI_TRANSFER_MODE);
  252. }
  253. return;
  254. case SDHCI_BLOCK_SIZE:
  255. val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
  256. break;
  257. }
  258. esdhc_clrset_le(host, 0xffff, val, reg);
  259. }
  260. static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
  261. {
  262. u32 new_val;
  263. switch (reg) {
  264. case SDHCI_POWER_CONTROL:
  265. /*
  266. * FSL put some DMA bits here
  267. * If your board has a regulator, code should be here
  268. */
  269. return;
  270. case SDHCI_HOST_CONTROL:
  271. /* FSL messed up here, so we can just keep those three */
  272. new_val = val & (SDHCI_CTRL_LED | \
  273. SDHCI_CTRL_4BITBUS | \
  274. SDHCI_CTRL_D3CD);
  275. /* ensure the endianess */
  276. new_val |= ESDHC_HOST_CONTROL_LE;
  277. /* DMA mode bits are shifted */
  278. new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
  279. esdhc_clrset_le(host, 0xffff, new_val, reg);
  280. return;
  281. }
  282. esdhc_clrset_le(host, 0xff, val, reg);
  283. /*
  284. * The esdhc has a design violation to SDHC spec which tells
  285. * that software reset should not affect card detection circuit.
  286. * But esdhc clears its SYSCTL register bits [0..2] during the
  287. * software reset. This will stop those clocks that card detection
  288. * circuit relies on. To work around it, we turn the clocks on back
  289. * to keep card detection circuit functional.
  290. */
  291. if ((reg == SDHCI_SOFTWARE_RESET) && (val & 1))
  292. esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL);
  293. }
  294. static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
  295. {
  296. struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
  297. return clk_get_rate(pltfm_host->clk);
  298. }
  299. static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
  300. {
  301. struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
  302. return clk_get_rate(pltfm_host->clk) / 256 / 16;
  303. }
  304. static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
  305. {
  306. struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
  307. struct pltfm_imx_data *imx_data = pltfm_host->priv;
  308. struct esdhc_platform_data *boarddata = &imx_data->boarddata;
  309. switch (boarddata->wp_type) {
  310. case ESDHC_WP_GPIO:
  311. if (gpio_is_valid(boarddata->wp_gpio))
  312. return gpio_get_value(boarddata->wp_gpio);
  313. case ESDHC_WP_CONTROLLER:
  314. return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
  315. SDHCI_WRITE_PROTECT);
  316. case ESDHC_WP_NONE:
  317. break;
  318. }
  319. return -ENOSYS;
  320. }
  321. static struct sdhci_ops sdhci_esdhc_ops = {
  322. .read_l = esdhc_readl_le,
  323. .read_w = esdhc_readw_le,
  324. .write_l = esdhc_writel_le,
  325. .write_w = esdhc_writew_le,
  326. .write_b = esdhc_writeb_le,
  327. .set_clock = esdhc_set_clock,
  328. .get_max_clock = esdhc_pltfm_get_max_clock,
  329. .get_min_clock = esdhc_pltfm_get_min_clock,
  330. .get_ro = esdhc_pltfm_get_ro,
  331. };
  332. static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
  333. .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_HISPD_BIT
  334. | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
  335. | SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC
  336. | SDHCI_QUIRK_BROKEN_CARD_DETECTION,
  337. .ops = &sdhci_esdhc_ops,
  338. };
  339. static irqreturn_t cd_irq(int irq, void *data)
  340. {
  341. struct sdhci_host *sdhost = (struct sdhci_host *)data;
  342. tasklet_schedule(&sdhost->card_tasklet);
  343. return IRQ_HANDLED;
  344. };
  345. #ifdef CONFIG_OF
  346. static int __devinit
  347. sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
  348. struct esdhc_platform_data *boarddata)
  349. {
  350. struct device_node *np = pdev->dev.of_node;
  351. if (!np)
  352. return -ENODEV;
  353. if (of_get_property(np, "fsl,card-wired", NULL))
  354. boarddata->cd_type = ESDHC_CD_PERMANENT;
  355. if (of_get_property(np, "fsl,cd-controller", NULL))
  356. boarddata->cd_type = ESDHC_CD_CONTROLLER;
  357. if (of_get_property(np, "fsl,wp-controller", NULL))
  358. boarddata->wp_type = ESDHC_WP_CONTROLLER;
  359. boarddata->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
  360. if (gpio_is_valid(boarddata->cd_gpio))
  361. boarddata->cd_type = ESDHC_CD_GPIO;
  362. boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
  363. if (gpio_is_valid(boarddata->wp_gpio))
  364. boarddata->wp_type = ESDHC_WP_GPIO;
  365. return 0;
  366. }
  367. #else
  368. static inline int
  369. sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
  370. struct esdhc_platform_data *boarddata)
  371. {
  372. return -ENODEV;
  373. }
  374. #endif
  375. static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
  376. {
  377. const struct of_device_id *of_id =
  378. of_match_device(imx_esdhc_dt_ids, &pdev->dev);
  379. struct sdhci_pltfm_host *pltfm_host;
  380. struct sdhci_host *host;
  381. struct esdhc_platform_data *boarddata;
  382. struct clk *clk;
  383. int err;
  384. struct pltfm_imx_data *imx_data;
  385. host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata);
  386. if (IS_ERR(host))
  387. return PTR_ERR(host);
  388. pltfm_host = sdhci_priv(host);
  389. imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL);
  390. if (!imx_data) {
  391. err = -ENOMEM;
  392. goto err_imx_data;
  393. }
  394. if (of_id)
  395. pdev->id_entry = of_id->data;
  396. imx_data->devtype = pdev->id_entry->driver_data;
  397. pltfm_host->priv = imx_data;
  398. clk = clk_get(mmc_dev(host->mmc), NULL);
  399. if (IS_ERR(clk)) {
  400. dev_err(mmc_dev(host->mmc), "clk err\n");
  401. err = PTR_ERR(clk);
  402. goto err_clk_get;
  403. }
  404. clk_enable(clk);
  405. pltfm_host->clk = clk;
  406. if (!is_imx25_esdhc(imx_data))
  407. host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
  408. if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
  409. /* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
  410. host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK
  411. | SDHCI_QUIRK_BROKEN_ADMA;
  412. if (is_imx53_esdhc(imx_data))
  413. imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
  414. /*
  415. * The imx6q ROM code will change the default watermark level setting
  416. * to something insane. Change it back here.
  417. */
  418. if (is_imx6q_usdhc(imx_data))
  419. writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL);
  420. boarddata = &imx_data->boarddata;
  421. if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
  422. if (!host->mmc->parent->platform_data) {
  423. dev_err(mmc_dev(host->mmc), "no board data!\n");
  424. err = -EINVAL;
  425. goto no_board_data;
  426. }
  427. imx_data->boarddata = *((struct esdhc_platform_data *)
  428. host->mmc->parent->platform_data);
  429. }
  430. /* write_protect */
  431. if (boarddata->wp_type == ESDHC_WP_GPIO) {
  432. err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
  433. if (err) {
  434. dev_warn(mmc_dev(host->mmc),
  435. "no write-protect pin available!\n");
  436. boarddata->wp_gpio = -EINVAL;
  437. }
  438. } else {
  439. boarddata->wp_gpio = -EINVAL;
  440. }
  441. /* card_detect */
  442. if (boarddata->cd_type != ESDHC_CD_GPIO)
  443. boarddata->cd_gpio = -EINVAL;
  444. switch (boarddata->cd_type) {
  445. case ESDHC_CD_GPIO:
  446. err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD");
  447. if (err) {
  448. dev_err(mmc_dev(host->mmc),
  449. "no card-detect pin available!\n");
  450. goto no_card_detect_pin;
  451. }
  452. err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq,
  453. IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
  454. mmc_hostname(host->mmc), host);
  455. if (err) {
  456. dev_err(mmc_dev(host->mmc), "request irq error\n");
  457. goto no_card_detect_irq;
  458. }
  459. /* fall through */
  460. case ESDHC_CD_CONTROLLER:
  461. /* we have a working card_detect back */
  462. host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
  463. break;
  464. case ESDHC_CD_PERMANENT:
  465. host->mmc->caps = MMC_CAP_NONREMOVABLE;
  466. break;
  467. case ESDHC_CD_NONE:
  468. break;
  469. }
  470. err = sdhci_add_host(host);
  471. if (err)
  472. goto err_add_host;
  473. return 0;
  474. err_add_host:
  475. if (gpio_is_valid(boarddata->cd_gpio))
  476. free_irq(gpio_to_irq(boarddata->cd_gpio), host);
  477. no_card_detect_irq:
  478. if (gpio_is_valid(boarddata->cd_gpio))
  479. gpio_free(boarddata->cd_gpio);
  480. if (gpio_is_valid(boarddata->wp_gpio))
  481. gpio_free(boarddata->wp_gpio);
  482. no_card_detect_pin:
  483. no_board_data:
  484. clk_disable(pltfm_host->clk);
  485. clk_put(pltfm_host->clk);
  486. err_clk_get:
  487. kfree(imx_data);
  488. err_imx_data:
  489. sdhci_pltfm_free(pdev);
  490. return err;
  491. }
  492. static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
  493. {
  494. struct sdhci_host *host = platform_get_drvdata(pdev);
  495. struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
  496. struct pltfm_imx_data *imx_data = pltfm_host->priv;
  497. struct esdhc_platform_data *boarddata = &imx_data->boarddata;
  498. int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
  499. sdhci_remove_host(host, dead);
  500. if (gpio_is_valid(boarddata->wp_gpio))
  501. gpio_free(boarddata->wp_gpio);
  502. if (gpio_is_valid(boarddata->cd_gpio)) {
  503. free_irq(gpio_to_irq(boarddata->cd_gpio), host);
  504. gpio_free(boarddata->cd_gpio);
  505. }
  506. clk_disable(pltfm_host->clk);
  507. clk_put(pltfm_host->clk);
  508. kfree(imx_data);
  509. sdhci_pltfm_free(pdev);
  510. return 0;
  511. }
  512. static struct platform_driver sdhci_esdhc_imx_driver = {
  513. .driver = {
  514. .name = "sdhci-esdhc-imx",
  515. .owner = THIS_MODULE,
  516. .of_match_table = imx_esdhc_dt_ids,
  517. .pm = SDHCI_PLTFM_PMOPS,
  518. },
  519. .id_table = imx_esdhc_devtype,
  520. .probe = sdhci_esdhc_imx_probe,
  521. .remove = __devexit_p(sdhci_esdhc_imx_remove),
  522. };
  523. module_platform_driver(sdhci_esdhc_imx_driver);
  524. MODULE_DESCRIPTION("SDHCI driver for Freescale i.MX eSDHC");
  525. MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
  526. MODULE_LICENSE("GPL v2");