| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165 |
- if ARCH_TEGRA
- comment "NVIDIA Tegra options"
- config ARCH_TEGRA_2x_SOC
- bool "Enable support for Tegra20 family"
- select CPU_V7
- select ARM_GIC
- select ARCH_REQUIRE_GPIOLIB
- select PINCTRL
- select PINCTRL_TEGRA20
- select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select USB_ULPI if USB
- select USB_ULPI_VIEWPORT if USB_SUPPORT
- select ARM_ERRATA_720789
- select ARM_ERRATA_742230
- select ARM_ERRATA_751472
- select ARM_ERRATA_754327
- select ARM_ERRATA_764369
- select PL310_ERRATA_727915 if CACHE_L2X0
- select PL310_ERRATA_769419 if CACHE_L2X0
- select CPU_FREQ_TABLE if CPU_FREQ
- help
- Support for NVIDIA Tegra AP20 and T20 processors, based on the
- ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
- config ARCH_TEGRA_3x_SOC
- bool "Enable support for Tegra30 family"
- select CPU_V7
- select ARM_GIC
- select ARCH_REQUIRE_GPIOLIB
- select PINCTRL
- select PINCTRL_TEGRA30
- select USB_ARCH_HAS_EHCI if USB_SUPPORT
- select USB_ULPI if USB
- select USB_ULPI_VIEWPORT if USB_SUPPORT
- select USE_OF
- select ARM_ERRATA_743622
- select ARM_ERRATA_751472
- select ARM_ERRATA_754322
- select ARM_ERRATA_764369
- select PL310_ERRATA_769419 if CACHE_L2X0
- select CPU_FREQ_TABLE if CPU_FREQ
- help
- Support for NVIDIA Tegra T30 processor family, based on the
- ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
- config TEGRA_PCI
- bool "PCI Express support"
- depends on ARCH_TEGRA_2x_SOC
- select PCI
- config TEGRA_AHB
- bool "Enable AHB driver for NVIDIA Tegra SoCs"
- default y
- help
- Adds AHB configuration functionality for NVIDIA Tegra SoCs,
- which controls AHB bus master arbitration and some
- perfomance parameters(priority, prefech size).
- comment "Tegra board type"
- config MACH_HARMONY
- bool "Harmony board"
- depends on ARCH_TEGRA_2x_SOC
- help
- Support for nVidia Harmony development platform
- config MACH_KAEN
- bool "Kaen board"
- depends on ARCH_TEGRA_2x_SOC
- select MACH_SEABOARD
- help
- Support for the Kaen version of Seaboard
- config MACH_PAZ00
- bool "Paz00 board"
- depends on ARCH_TEGRA_2x_SOC
- help
- Support for the Toshiba AC100/Dynabook AZ netbook
- config MACH_SEABOARD
- bool "Seaboard board"
- depends on ARCH_TEGRA_2x_SOC
- help
- Support for nVidia Seaboard development platform. It will
- also be included for some of the derivative boards that
- have large similarities with the seaboard design.
- config MACH_TRIMSLICE
- bool "TrimSlice board"
- depends on ARCH_TEGRA_2x_SOC
- select TEGRA_PCI
- help
- Support for CompuLab TrimSlice platform
- config MACH_WARIO
- bool "Wario board"
- depends on ARCH_TEGRA_2x_SOC
- select MACH_SEABOARD
- help
- Support for the Wario version of Seaboard
- choice
- prompt "Default low-level debug console UART"
- default TEGRA_DEBUG_UART_NONE
- config TEGRA_DEBUG_UART_NONE
- bool "None"
- config TEGRA_DEBUG_UARTA
- bool "UART-A"
- config TEGRA_DEBUG_UARTB
- bool "UART-B"
- config TEGRA_DEBUG_UARTC
- bool "UART-C"
- config TEGRA_DEBUG_UARTD
- bool "UART-D"
- config TEGRA_DEBUG_UARTE
- bool "UART-E"
- endchoice
- choice
- prompt "Automatic low-level debug console UART"
- default TEGRA_DEBUG_UART_AUTO_NONE
- config TEGRA_DEBUG_UART_AUTO_NONE
- bool "None"
- config TEGRA_DEBUG_UART_AUTO_ODMDATA
- bool "Via ODMDATA"
- help
- Automatically determines which UART to use for low-level debug based
- on the ODMDATA value. This value is part of the BCT, and is written
- to the boot memory device using nvflash, or other flashing tool.
- When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
- 0/1/2/3/4 are UART A/B/C/D/E.
- config TEGRA_DEBUG_UART_AUTO_SCRATCH
- bool "Via UART scratch register"
- help
- Automatically determines which UART to use for low-level debug based
- on the UART scratch register value. Some bootloaders put ASCII 'D'
- in this register when they initialize their own console UART output.
- Using this option allows the kernel to automatically pick the same
- UART.
- endchoice
- config TEGRA_SYSTEM_DMA
- bool "Enable system DMA driver for NVIDIA Tegra SoCs"
- default y
- help
- Adds system DMA functionality for NVIDIA Tegra SoCs, used by
- several Tegra device drivers
- config TEGRA_EMC_SCALING_ENABLE
- bool "Enable scaling the memory frequency"
- endif
|
