123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439 |
- /*======================================================================
- A PCMCIA token-ring driver for IBM-based cards
- This driver supports the IBM PCMCIA Token-Ring Card.
- Written by Steve Kipisz, kipisz@vnet.ibm.com or
- bungy@ibm.net
- Written 1995,1996.
- This code is based on pcnet_cs.c from David Hinds.
-
- V2.2.0 February 1999 - Mike Phillips phillim@amtrak.com
- Linux V2.2.x presented significant changes to the underlying
- ibmtr.c code. Mainly the code became a lot more organized and
- modular.
- This caused the old PCMCIA Token Ring driver to give up and go
- home early. Instead of just patching the old code to make it
- work, the PCMCIA code has been streamlined, updated and possibly
- improved.
- This code now only contains code required for the Card Services.
- All we do here is set the card up enough so that the real ibmtr.c
- driver can find it and work with it properly.
- i.e. We set up the io port, irq, mmio memory and shared ram
- memory. This enables ibmtr_probe in ibmtr.c to find the card and
- configure it as though it was a normal ISA and/or PnP card.
- CHANGES
- v2.2.5 April 1999 Mike Phillips (phillim@amtrak.com)
- Obscure bug fix, required changed to ibmtr.c not ibmtr_cs.c
-
- v2.2.7 May 1999 Mike Phillips (phillim@amtrak.com)
- Updated to version 2.2.7 to match the first version of the kernel
- that the modification to ibmtr.c were incorporated into.
-
- v2.2.17 July 2000 Burt Silverman (burts@us.ibm.com)
- Address translation feature of PCMCIA controller is usable so
- memory windows can be placed in High memory (meaning above
- 0xFFFFF.)
- ======================================================================*/
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/ptrace.h>
- #include <linux/slab.h>
- #include <linux/string.h>
- #include <linux/timer.h>
- #include <linux/module.h>
- #include <linux/ethtool.h>
- #include <linux/netdevice.h>
- #include <linux/trdevice.h>
- #include <linux/ibmtr.h>
- #include <pcmcia/cs_types.h>
- #include <pcmcia/cs.h>
- #include <pcmcia/cistpl.h>
- #include <pcmcia/ds.h>
- #include <asm/uaccess.h>
- #include <asm/io.h>
- #include <asm/system.h>
- #define PCMCIA
- #include "../tokenring/ibmtr.c"
- #ifdef PCMCIA_DEBUG
- static int pc_debug = PCMCIA_DEBUG;
- module_param(pc_debug, int, 0);
- #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
- static char *version =
- "ibmtr_cs.c 1.10 1996/01/06 05:19:00 (Steve Kipisz)\n"
- " 2.2.7 1999/05/03 12:00:00 (Mike Phillips)\n"
- " 2.4.2 2001/30/28 Midnight (Burt Silverman)\n";
- #else
- #define DEBUG(n, args...)
- #endif
- /*====================================================================*/
- /* Parameters that can be set with 'insmod' */
- /* MMIO base address */
- static u_long mmiobase = 0xce000;
- /* SRAM base address */
- static u_long srambase = 0xd0000;
- /* SRAM size 8,16,32,64 */
- static u_long sramsize = 64;
- /* Ringspeed 4,16 */
- static int ringspeed = 16;
- module_param(mmiobase, ulong, 0);
- module_param(srambase, ulong, 0);
- module_param(sramsize, ulong, 0);
- module_param(ringspeed, int, 0);
- MODULE_LICENSE("GPL");
- /*====================================================================*/
- static int ibmtr_config(struct pcmcia_device *link);
- static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase);
- static void ibmtr_release(struct pcmcia_device *link);
- static void ibmtr_detach(struct pcmcia_device *p_dev);
- /*====================================================================*/
- typedef struct ibmtr_dev_t {
- struct pcmcia_device *p_dev;
- struct net_device *dev;
- dev_node_t node;
- window_handle_t sram_win_handle;
- struct tok_info *ti;
- } ibmtr_dev_t;
- static void netdev_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
- {
- strcpy(info->driver, "ibmtr_cs");
- }
- static const struct ethtool_ops netdev_ethtool_ops = {
- .get_drvinfo = netdev_get_drvinfo,
- };
- /*======================================================================
- ibmtr_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
- ======================================================================*/
- static int __devinit ibmtr_attach(struct pcmcia_device *link)
- {
- ibmtr_dev_t *info;
- struct net_device *dev;
- DEBUG(0, "ibmtr_attach()\n");
- /* Create new token-ring device */
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info) return -ENOMEM;
- dev = alloc_trdev(sizeof(struct tok_info));
- if (!dev) {
- kfree(info);
- return -ENOMEM;
- }
- info->p_dev = link;
- link->priv = info;
- info->ti = netdev_priv(dev);
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.NumPorts1 = 4;
- link->io.IOAddrLines = 16;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
- link->irq.Handler = &tok_interrupt;
- link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
- link->conf.Present = PRESENT_OPTION;
- link->irq.Instance = info->dev = dev;
- SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
- return ibmtr_config(link);
- } /* ibmtr_attach */
- /*======================================================================
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
- ======================================================================*/
- static void ibmtr_detach(struct pcmcia_device *link)
- {
- struct ibmtr_dev_t *info = link->priv;
- struct net_device *dev = info->dev;
- struct tok_info *ti = netdev_priv(dev);
- DEBUG(0, "ibmtr_detach(0x%p)\n", link);
-
- /*
- * When the card removal interrupt hits tok_interrupt(),
- * bail out early, so we don't crash the machine
- */
- ti->sram_phys |= 1;
- if (link->dev_node)
- unregister_netdev(dev);
-
- del_timer_sync(&(ti->tr_timer));
- ibmtr_release(link);
- free_netdev(dev);
- kfree(info);
- } /* ibmtr_detach */
- /*======================================================================
- ibmtr_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- token-ring device available to the system.
- ======================================================================*/
- #define CS_CHECK(fn, ret) \
- do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
- static int __devinit ibmtr_config(struct pcmcia_device *link)
- {
- ibmtr_dev_t *info = link->priv;
- struct net_device *dev = info->dev;
- struct tok_info *ti = netdev_priv(dev);
- win_req_t req;
- memreq_t mem;
- int i, last_ret, last_fn;
- DEBUG(0, "ibmtr_config(0x%p)\n", link);
- link->conf.ConfigIndex = 0x61;
- /* Determine if this is PRIMARY or ALTERNATE. */
- /* Try PRIMARY card at 0xA20-0xA23 */
- link->io.BasePort1 = 0xA20;
- i = pcmcia_request_io(link, &link->io);
- if (i != 0) {
- /* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */
- link->io.BasePort1 = 0xA24;
- CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
- }
- dev->base_addr = link->io.BasePort1;
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- dev->irq = link->irq.AssignedIRQ;
- ti->irq = link->irq.AssignedIRQ;
- ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq);
- /* Allocate the MMIO memory window */
- req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
- req.Attributes |= WIN_USE_WAIT;
- req.Base = 0;
- req.Size = 0x2000;
- req.AccessSpeed = 250;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
- mem.CardOffset = mmiobase;
- mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
- ti->mmio = ioremap(req.Base, req.Size);
- /* Allocate the SRAM memory window */
- req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
- req.Attributes |= WIN_USE_WAIT;
- req.Base = 0;
- req.Size = sramsize * 1024;
- req.AccessSpeed = 250;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &info->sram_win_handle));
- mem.CardOffset = srambase;
- mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(info->sram_win_handle, &mem));
- ti->sram_base = mem.CardOffset >> 12;
- ti->sram_virt = ioremap(req.Base, req.Size);
- ti->sram_phys = req.Base;
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
- /* Set up the Token-Ring Controller Configuration Register and
- turn on the card. Check the "Local Area Network Credit Card
- Adapters Technical Reference" SC30-3585 for this info. */
- ibmtr_hw_setup(dev, mmiobase);
- link->dev_node = &info->node;
- SET_NETDEV_DEV(dev, &handle_to_dev(link));
- i = ibmtr_probe_card(dev);
- if (i != 0) {
- printk(KERN_NOTICE "ibmtr_cs: register_netdev() failed\n");
- link->dev_node = NULL;
- goto failed;
- }
- strcpy(info->node.dev_name, dev->name);
- printk(KERN_INFO "%s: port %#3lx, irq %d,",
- dev->name, dev->base_addr, dev->irq);
- printk (" mmio %#5lx,", (u_long)ti->mmio);
- printk (" sram %#5lx,", (u_long)ti->sram_base << 12);
- printk ("\n" KERN_INFO " hwaddr=");
- for (i = 0; i < TR_ALEN; i++)
- printk("%02X", dev->dev_addr[i]);
- printk("\n");
- return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
- failed:
- ibmtr_release(link);
- return -ENODEV;
- } /* ibmtr_config */
- /*======================================================================
- After a card is removed, ibmtr_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
- ======================================================================*/
- static void ibmtr_release(struct pcmcia_device *link)
- {
- ibmtr_dev_t *info = link->priv;
- struct net_device *dev = info->dev;
- DEBUG(0, "ibmtr_release(0x%p)\n", link);
- if (link->win) {
- struct tok_info *ti = netdev_priv(dev);
- iounmap(ti->mmio);
- pcmcia_release_window(info->sram_win_handle);
- }
- pcmcia_disable_device(link);
- }
- static int ibmtr_suspend(struct pcmcia_device *link)
- {
- ibmtr_dev_t *info = link->priv;
- struct net_device *dev = info->dev;
- if (link->open)
- netif_device_detach(dev);
- return 0;
- }
- static int __devinit ibmtr_resume(struct pcmcia_device *link)
- {
- ibmtr_dev_t *info = link->priv;
- struct net_device *dev = info->dev;
- if (link->open) {
- ibmtr_probe(dev); /* really? */
- netif_device_attach(dev);
- }
- return 0;
- }
- /*====================================================================*/
- static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase)
- {
- int i;
- /* Bizarre IBM behavior, there are 16 bits of information we
- need to set, but the card only allows us to send 4 bits at a
- time. For each byte sent to base_addr, bits 7-4 tell the
- card which part of the 16 bits we are setting, bits 3-0 contain
- the actual information */
- /* First nibble provides 4 bits of mmio */
- i = (mmiobase >> 16) & 0x0F;
- outb(i, dev->base_addr);
- /* Second nibble provides 3 bits of mmio */
- i = 0x10 | ((mmiobase >> 12) & 0x0E);
- outb(i, dev->base_addr);
- /* Third nibble, hard-coded values */
- i = 0x26;
- outb(i, dev->base_addr);
- /* Fourth nibble sets shared ram page size */
- /* 8 = 00, 16 = 01, 32 = 10, 64 = 11 */
- i = (sramsize >> 4) & 0x07;
- i = ((i == 4) ? 3 : i) << 2;
- i |= 0x30;
- if (ringspeed == 16)
- i |= 2;
- if (dev->base_addr == 0xA24)
- i |= 1;
- outb(i, dev->base_addr);
- /* 0x40 will release the card for use */
- outb(0x40, dev->base_addr);
- return;
- }
- static struct pcmcia_device_id ibmtr_ids[] = {
- PCMCIA_DEVICE_PROD_ID12("3Com", "TokenLink Velocity PC Card", 0x41240e5b, 0x82c3734e),
- PCMCIA_DEVICE_PROD_ID12("IBM", "TOKEN RING", 0xb569a6e5, 0xbf8eed47),
- PCMCIA_DEVICE_NULL,
- };
- MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids);
- static struct pcmcia_driver ibmtr_cs_driver = {
- .owner = THIS_MODULE,
- .drv = {
- .name = "ibmtr_cs",
- },
- .probe = ibmtr_attach,
- .remove = ibmtr_detach,
- .id_table = ibmtr_ids,
- .suspend = ibmtr_suspend,
- .resume = ibmtr_resume,
- };
- static int __init init_ibmtr_cs(void)
- {
- return pcmcia_register_driver(&ibmtr_cs_driver);
- }
- static void __exit exit_ibmtr_cs(void)
- {
- pcmcia_unregister_driver(&ibmtr_cs_driver);
- }
- module_init(init_ibmtr_cs);
- module_exit(exit_ibmtr_cs);
|