setup.c 8.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337
  1. /*
  2. * Maple (970 eval board) setup code
  3. *
  4. * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
  5. * IBM Corp.
  6. *
  7. * This program is free software; you can redistribute it and/or
  8. * modify it under the terms of the GNU General Public License
  9. * as published by the Free Software Foundation; either version
  10. * 2 of the License, or (at your option) any later version.
  11. *
  12. */
  13. #undef DEBUG
  14. #include <linux/init.h>
  15. #include <linux/errno.h>
  16. #include <linux/sched.h>
  17. #include <linux/kernel.h>
  18. #include <linux/mm.h>
  19. #include <linux/stddef.h>
  20. #include <linux/unistd.h>
  21. #include <linux/ptrace.h>
  22. #include <linux/slab.h>
  23. #include <linux/user.h>
  24. #include <linux/tty.h>
  25. #include <linux/string.h>
  26. #include <linux/delay.h>
  27. #include <linux/ioport.h>
  28. #include <linux/major.h>
  29. #include <linux/initrd.h>
  30. #include <linux/vt_kern.h>
  31. #include <linux/console.h>
  32. #include <linux/pci.h>
  33. #include <linux/adb.h>
  34. #include <linux/cuda.h>
  35. #include <linux/pmu.h>
  36. #include <linux/irq.h>
  37. #include <linux/seq_file.h>
  38. #include <linux/root_dev.h>
  39. #include <linux/serial.h>
  40. #include <linux/smp.h>
  41. #include <linux/bitops.h>
  42. #include <linux/of_device.h>
  43. #include <linux/lmb.h>
  44. #include <asm/processor.h>
  45. #include <asm/sections.h>
  46. #include <asm/prom.h>
  47. #include <asm/system.h>
  48. #include <asm/pgtable.h>
  49. #include <asm/io.h>
  50. #include <asm/pci-bridge.h>
  51. #include <asm/iommu.h>
  52. #include <asm/machdep.h>
  53. #include <asm/dma.h>
  54. #include <asm/cputable.h>
  55. #include <asm/time.h>
  56. #include <asm/mpic.h>
  57. #include <asm/rtas.h>
  58. #include <asm/udbg.h>
  59. #include <asm/nvram.h>
  60. #include "maple.h"
  61. #ifdef DEBUG
  62. #define DBG(fmt...) udbg_printf(fmt)
  63. #else
  64. #define DBG(fmt...)
  65. #endif
  66. static unsigned long maple_find_nvram_base(void)
  67. {
  68. struct device_node *rtcs;
  69. unsigned long result = 0;
  70. /* find NVRAM device */
  71. rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111");
  72. if (rtcs) {
  73. struct resource r;
  74. if (of_address_to_resource(rtcs, 0, &r)) {
  75. printk(KERN_EMERG "Maple: Unable to translate NVRAM"
  76. " address\n");
  77. goto bail;
  78. }
  79. if (!(r.flags & IORESOURCE_IO)) {
  80. printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n");
  81. goto bail;
  82. }
  83. result = r.start;
  84. } else
  85. printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
  86. bail:
  87. of_node_put(rtcs);
  88. return result;
  89. }
  90. static void maple_restart(char *cmd)
  91. {
  92. unsigned int maple_nvram_base;
  93. const unsigned int *maple_nvram_offset, *maple_nvram_command;
  94. struct device_node *sp;
  95. maple_nvram_base = maple_find_nvram_base();
  96. if (maple_nvram_base == 0)
  97. goto fail;
  98. /* find service processor device */
  99. sp = of_find_node_by_name(NULL, "service-processor");
  100. if (!sp) {
  101. printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
  102. goto fail;
  103. }
  104. maple_nvram_offset = of_get_property(sp, "restart-addr", NULL);
  105. maple_nvram_command = of_get_property(sp, "restart-value", NULL);
  106. of_node_put(sp);
  107. /* send command */
  108. outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);
  109. for (;;) ;
  110. fail:
  111. printk(KERN_EMERG "Maple: Manual Restart Required\n");
  112. }
  113. static void maple_power_off(void)
  114. {
  115. unsigned int maple_nvram_base;
  116. const unsigned int *maple_nvram_offset, *maple_nvram_command;
  117. struct device_node *sp;
  118. maple_nvram_base = maple_find_nvram_base();
  119. if (maple_nvram_base == 0)
  120. goto fail;
  121. /* find service processor device */
  122. sp = of_find_node_by_name(NULL, "service-processor");
  123. if (!sp) {
  124. printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
  125. goto fail;
  126. }
  127. maple_nvram_offset = of_get_property(sp, "power-off-addr", NULL);
  128. maple_nvram_command = of_get_property(sp, "power-off-value", NULL);
  129. of_node_put(sp);
  130. /* send command */
  131. outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);
  132. for (;;) ;
  133. fail:
  134. printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
  135. }
  136. static void maple_halt(void)
  137. {
  138. maple_power_off();
  139. }
  140. #ifdef CONFIG_SMP
  141. struct smp_ops_t maple_smp_ops = {
  142. .probe = smp_mpic_probe,
  143. .message_pass = smp_mpic_message_pass,
  144. .kick_cpu = smp_generic_kick_cpu,
  145. .setup_cpu = smp_mpic_setup_cpu,
  146. .give_timebase = smp_generic_give_timebase,
  147. .take_timebase = smp_generic_take_timebase,
  148. };
  149. #endif /* CONFIG_SMP */
  150. static void __init maple_use_rtas_reboot_and_halt_if_present(void)
  151. {
  152. if (rtas_service_present("system-reboot") &&
  153. rtas_service_present("power-off")) {
  154. ppc_md.restart = rtas_restart;
  155. ppc_md.power_off = rtas_power_off;
  156. ppc_md.halt = rtas_halt;
  157. }
  158. }
  159. void __init maple_setup_arch(void)
  160. {
  161. /* init to some ~sane value until calibrate_delay() runs */
  162. loops_per_jiffy = 50000000;
  163. /* Setup SMP callback */
  164. #ifdef CONFIG_SMP
  165. smp_ops = &maple_smp_ops;
  166. #endif
  167. /* Lookup PCI hosts */
  168. maple_pci_init();
  169. #ifdef CONFIG_DUMMY_CONSOLE
  170. conswitchp = &dummy_con;
  171. #endif
  172. maple_use_rtas_reboot_and_halt_if_present();
  173. printk(KERN_DEBUG "Using native/NAP idle loop\n");
  174. mmio_nvram_init();
  175. }
  176. /*
  177. * Early initialization.
  178. */
  179. static void __init maple_init_early(void)
  180. {
  181. DBG(" -> maple_init_early\n");
  182. iommu_init_early_dart();
  183. DBG(" <- maple_init_early\n");
  184. }
  185. /*
  186. * This is almost identical to pSeries and CHRP. We need to make that
  187. * code generic at one point, with appropriate bits in the device-tree to
  188. * identify the presence of an HT APIC
  189. */
  190. static void __init maple_init_IRQ(void)
  191. {
  192. struct device_node *root, *np, *mpic_node = NULL;
  193. const unsigned int *opprop;
  194. unsigned long openpic_addr = 0;
  195. int naddr, n, i, opplen, has_isus = 0;
  196. struct mpic *mpic;
  197. unsigned int flags = MPIC_PRIMARY;
  198. /* Locate MPIC in the device-tree. Note that there is a bug
  199. * in Maple device-tree where the type of the controller is
  200. * open-pic and not interrupt-controller
  201. */
  202. for_each_node_by_type(np, "interrupt-controller")
  203. if (of_device_is_compatible(np, "open-pic")) {
  204. mpic_node = np;
  205. break;
  206. }
  207. if (mpic_node == NULL)
  208. for_each_node_by_type(np, "open-pic") {
  209. mpic_node = np;
  210. break;
  211. }
  212. if (mpic_node == NULL) {
  213. printk(KERN_ERR
  214. "Failed to locate the MPIC interrupt controller\n");
  215. return;
  216. }
  217. /* Find address list in /platform-open-pic */
  218. root = of_find_node_by_path("/");
  219. naddr = of_n_addr_cells(root);
  220. opprop = of_get_property(root, "platform-open-pic", &opplen);
  221. if (opprop != 0) {
  222. openpic_addr = of_read_number(opprop, naddr);
  223. has_isus = (opplen > naddr);
  224. printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
  225. openpic_addr, has_isus);
  226. }
  227. BUG_ON(openpic_addr == 0);
  228. /* Check for a big endian MPIC */
  229. if (of_get_property(np, "big-endian", NULL) != NULL)
  230. flags |= MPIC_BIG_ENDIAN;
  231. /* XXX Maple specific bits */
  232. flags |= MPIC_U3_HT_IRQS | MPIC_WANTS_RESET;
  233. /* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */
  234. flags |= MPIC_BIG_ENDIAN;
  235. /* Setup the openpic driver. More device-tree junks, we hard code no
  236. * ISUs for now. I'll have to revisit some stuffs with the folks doing
  237. * the firmware for those
  238. */
  239. mpic = mpic_alloc(mpic_node, openpic_addr, flags,
  240. /*has_isus ? 16 :*/ 0, 0, " MPIC ");
  241. BUG_ON(mpic == NULL);
  242. /* Add ISUs */
  243. opplen /= sizeof(u32);
  244. for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
  245. unsigned long isuaddr = of_read_number(opprop + i, naddr);
  246. mpic_assign_isu(mpic, n, isuaddr);
  247. }
  248. /* All ISUs are setup, complete initialization */
  249. mpic_init(mpic);
  250. ppc_md.get_irq = mpic_get_irq;
  251. of_node_put(mpic_node);
  252. of_node_put(root);
  253. }
  254. static void __init maple_progress(char *s, unsigned short hex)
  255. {
  256. printk("*** %04x : %s\n", hex, s ? s : "");
  257. }
  258. /*
  259. * Called very early, MMU is off, device-tree isn't unflattened
  260. */
  261. static int __init maple_probe(void)
  262. {
  263. unsigned long root = of_get_flat_dt_root();
  264. if (!of_flat_dt_is_compatible(root, "Momentum,Maple") &&
  265. !of_flat_dt_is_compatible(root, "Momentum,Apache"))
  266. return 0;
  267. /*
  268. * On U3, the DART (iommu) must be allocated now since it
  269. * has an impact on htab_initialize (due to the large page it
  270. * occupies having to be broken up so the DART itself is not
  271. * part of the cacheable linar mapping
  272. */
  273. alloc_dart_table();
  274. hpte_init_native();
  275. return 1;
  276. }
  277. define_machine(maple) {
  278. .name = "Maple",
  279. .probe = maple_probe,
  280. .setup_arch = maple_setup_arch,
  281. .init_early = maple_init_early,
  282. .init_IRQ = maple_init_IRQ,
  283. .pci_irq_fixup = maple_pci_irq_fixup,
  284. .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq,
  285. .restart = maple_restart,
  286. .power_off = maple_power_off,
  287. .halt = maple_halt,
  288. .get_boot_time = maple_get_boot_time,
  289. .set_rtc_time = maple_set_rtc_time,
  290. .get_rtc_time = maple_get_rtc_time,
  291. .calibrate_decr = generic_calibrate_decr,
  292. .progress = maple_progress,
  293. .power_save = power4_idle,
  294. };