e820.h 4.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157
  1. #ifndef _ASM_X86_E820_H
  2. #define _ASM_X86_E820_H
  3. #define E820MAP 0x2d0 /* our map */
  4. #define E820MAX 128 /* number of entries in E820MAP */
  5. /*
  6. * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the
  7. * constrained space in the zeropage. If we have more nodes than
  8. * that, and if we've booted off EFI firmware, then the EFI tables
  9. * passed us from the EFI firmware can list more nodes. Size our
  10. * internal memory map tables to have room for these additional
  11. * nodes, based on up to three entries per node for which the
  12. * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT),
  13. * plus E820MAX, allowing space for the possible duplicate E820
  14. * entries that might need room in the same arrays, prior to the
  15. * call to sanitize_e820_map() to remove duplicates. The allowance
  16. * of three memory map entries per node is "enough" entries for
  17. * the initial hardware platform motivating this mechanism to make
  18. * use of additional EFI map entries. Future platforms may want
  19. * to allow more than three entries per node or otherwise refine
  20. * this size.
  21. */
  22. /*
  23. * Odd: 'make headers_check' complains about numa.h if I try
  24. * to collapse the next two #ifdef lines to a single line:
  25. * #if defined(__KERNEL__) && defined(CONFIG_EFI)
  26. */
  27. #ifdef __KERNEL__
  28. #ifdef CONFIG_EFI
  29. #include <linux/numa.h>
  30. #define E820_X_MAX (E820MAX + 3 * MAX_NUMNODES)
  31. #else /* ! CONFIG_EFI */
  32. #define E820_X_MAX E820MAX
  33. #endif
  34. #else /* ! __KERNEL__ */
  35. #define E820_X_MAX E820MAX
  36. #endif
  37. #define E820NR 0x1e8 /* # entries in E820MAP */
  38. #define E820_RAM 1
  39. #define E820_RESERVED 2
  40. #define E820_ACPI 3
  41. #define E820_NVS 4
  42. #define E820_UNUSABLE 5
  43. /*
  44. * reserved RAM used by kernel itself
  45. * if CONFIG_INTEL_TXT is enabled, memory of this type will be
  46. * included in the S3 integrity calculation and so should not include
  47. * any memory that BIOS might alter over the S3 transition
  48. */
  49. #define E820_RESERVED_KERN 128
  50. /*
  51. * Address ranges that need to be mapped by the kernel direct
  52. * mapping. This is used to make sure regions such as
  53. * EFI_RUNTIME_SERVICES_DATA are directly mapped. See setup_arch().
  54. */
  55. #define E820_RESERVED_EFI 129
  56. #ifndef __ASSEMBLY__
  57. #include <linux/types.h>
  58. struct e820entry {
  59. __u64 addr; /* start of memory segment */
  60. __u64 size; /* size of memory segment */
  61. __u32 type; /* type of memory segment */
  62. } __attribute__((packed));
  63. struct e820map {
  64. __u32 nr_map;
  65. struct e820entry map[E820_X_MAX];
  66. };
  67. #define ISA_START_ADDRESS 0xa0000
  68. #define ISA_END_ADDRESS 0x100000
  69. #define BIOS_BEGIN 0x000a0000
  70. #define BIOS_END 0x00100000
  71. #define BIOS_ROM_BASE 0xffe00000
  72. #define BIOS_ROM_END 0xffffffff
  73. #ifdef __KERNEL__
  74. /* see comment in arch/x86/kernel/e820.c */
  75. extern struct e820map e820;
  76. extern struct e820map e820_saved;
  77. extern unsigned long pci_mem_start;
  78. extern int e820_any_mapped(u64 start, u64 end, unsigned type);
  79. extern int e820_all_mapped(u64 start, u64 end, unsigned type);
  80. extern void e820_add_region(u64 start, u64 size, int type);
  81. extern void e820_print_map(char *who);
  82. extern int
  83. sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, u32 *pnr_map);
  84. extern u64 e820_update_range(u64 start, u64 size, unsigned old_type,
  85. unsigned new_type);
  86. extern u64 e820_remove_range(u64 start, u64 size, unsigned old_type,
  87. int checktype);
  88. extern void update_e820(void);
  89. extern void e820_setup_gap(void);
  90. extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
  91. unsigned long start_addr, unsigned long long end_addr);
  92. struct setup_data;
  93. extern void parse_e820_ext(struct setup_data *data);
  94. #if defined(CONFIG_X86_64) || \
  95. (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
  96. extern void e820_mark_nosave_regions(unsigned long limit_pfn);
  97. #else
  98. static inline void e820_mark_nosave_regions(unsigned long limit_pfn)
  99. {
  100. }
  101. #endif
  102. #ifdef CONFIG_MEMTEST
  103. extern void early_memtest(unsigned long start, unsigned long end);
  104. #else
  105. static inline void early_memtest(unsigned long start, unsigned long end)
  106. {
  107. }
  108. #endif
  109. extern unsigned long e820_end_pfn(unsigned long limit_pfn, unsigned type);
  110. extern unsigned long e820_end_of_ram_pfn(void);
  111. extern unsigned long e820_end_of_low_ram_pfn(void);
  112. extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
  113. void memblock_x86_fill(void);
  114. void memblock_find_dma_reserve(void);
  115. extern void finish_e820_parsing(void);
  116. extern void e820_reserve_resources(void);
  117. extern void e820_reserve_resources_late(void);
  118. extern void setup_memory_map(void);
  119. extern char *default_machine_specific_memory_setup(void);
  120. /*
  121. * Returns true iff the specified range [s,e) is completely contained inside
  122. * the ISA region.
  123. */
  124. static inline bool is_ISA_range(u64 s, u64 e)
  125. {
  126. return s >= ISA_START_ADDRESS && e <= ISA_END_ADDRESS;
  127. }
  128. #endif /* __KERNEL__ */
  129. #endif /* __ASSEMBLY__ */
  130. #ifdef __KERNEL__
  131. #include <linux/ioport.h>
  132. #define HIGH_MEMORY (1024*1024)
  133. #endif /* __KERNEL__ */
  134. #endif /* _ASM_X86_E820_H */