anomaly.h 3.3 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485
  1. /*
  2. * File: include/asm-blackfin/mach-bf548/anomaly.h
  3. * Bugs: Enter bugs at http://blackfin.uclinux.org/
  4. *
  5. * Copyright (C) 2004-2007 Analog Devices Inc.
  6. * Licensed under the GPL-2 or later.
  7. */
  8. /* This file shoule be up to date with:
  9. * - Revision C, July 16, 2007; ADSP-BF549 Silicon Anomaly List
  10. */
  11. #ifndef _MACH_ANOMALY_H_
  12. #define _MACH_ANOMALY_H_
  13. /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
  14. #define ANOMALY_05000074 (1)
  15. /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
  16. #define ANOMALY_05000119 (1)
  17. /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
  18. #define ANOMALY_05000122 (1)
  19. /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
  20. #define ANOMALY_05000245 (1)
  21. /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
  22. #define ANOMALY_05000265 (1)
  23. /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
  24. #define ANOMALY_05000272 (1)
  25. /* False Hardware Error Exception when ISR context is not restored */
  26. #define ANOMALY_05000281 (1)
  27. /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
  28. #define ANOMALY_05000304 (1)
  29. /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
  30. #define ANOMALY_05000310 (1)
  31. /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
  32. #define ANOMALY_05000312 (1)
  33. /* TWI Slave Boot Mode Is Not Functional */
  34. #define ANOMALY_05000324 (1)
  35. /* External FIFO Boot Mode Is Not Functional */
  36. #define ANOMALY_05000325 (1)
  37. /* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
  38. #define ANOMALY_05000327 (1)
  39. /* Incorrect Access of OTP_STATUS During otp_write() Function */
  40. #define ANOMALY_05000328 (1)
  41. /* Synchronous Burst Flash Boot Mode Is Not Functional */
  42. #define ANOMALY_05000329 (1)
  43. /* Host DMA Boot Mode Is Not Functional */
  44. #define ANOMALY_05000330 (1)
  45. /* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
  46. #define ANOMALY_05000334 (1)
  47. /* Inadequate Rotary Debounce Logic Duration */
  48. #define ANOMALY_05000335 (1)
  49. /* Phantom Interrupt Occurs After First Configuration of Host DMA Port */
  50. #define ANOMALY_05000336 (1)
  51. /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
  52. #define ANOMALY_05000337 (1)
  53. /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
  54. #define ANOMALY_05000338 (1)
  55. /* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */
  56. #define ANOMALY_05000340 (1)
  57. /* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */
  58. #define ANOMALY_05000344 (1)
  59. /* USB Calibration Value Is Not Intialized */
  60. #define ANOMALY_05000346 (1)
  61. /* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
  62. #define ANOMALY_05000347 (1)
  63. /* Data Lost when Core Reads SDH Data FIFO */
  64. #define ANOMALY_05000349 (1)
  65. /* PLL Status Register Is Inaccurate */
  66. #define ANOMALY_05000351 (1)
  67. /* Anomalies that don't exist on this proc */
  68. #define ANOMALY_05000125 (0)
  69. #define ANOMALY_05000158 (0)
  70. #define ANOMALY_05000183 (0)
  71. #define ANOMALY_05000198 (0)
  72. #define ANOMALY_05000230 (0)
  73. #define ANOMALY_05000244 (0)
  74. #define ANOMALY_05000261 (0)
  75. #define ANOMALY_05000263 (0)
  76. #define ANOMALY_05000266 (0)
  77. #define ANOMALY_05000273 (0)
  78. #define ANOMALY_05000311 (0)
  79. #define ANOMALY_05000323 (0)
  80. #endif