malta_setup.c 5.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187
  1. /*
  2. * Carsten Langgaard, carstenl@mips.com
  3. * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
  4. *
  5. * This program is free software; you can distribute it and/or modify it
  6. * under the terms of the GNU General Public License (Version 2) as
  7. * published by the Free Software Foundation.
  8. *
  9. * This program is distributed in the hope it will be useful, but WITHOUT
  10. * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11. * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
  12. * for more details.
  13. *
  14. * You should have received a copy of the GNU General Public License along
  15. * with this program; if not, write to the Free Software Foundation, Inc.,
  16. * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  17. */
  18. #include <linux/init.h>
  19. #include <linux/sched.h>
  20. #include <linux/ioport.h>
  21. #include <linux/pci.h>
  22. #include <linux/screen_info.h>
  23. #include <asm/cpu.h>
  24. #include <asm/bootinfo.h>
  25. #include <asm/irq.h>
  26. #include <asm/mips-boards/generic.h>
  27. #include <asm/mips-boards/prom.h>
  28. #include <asm/mips-boards/malta.h>
  29. #include <asm/mips-boards/maltaint.h>
  30. #include <asm/dma.h>
  31. #include <asm/time.h>
  32. #include <asm/traps.h>
  33. #ifdef CONFIG_VT
  34. #include <linux/console.h>
  35. #endif
  36. extern void mips_reboot_setup(void);
  37. extern unsigned long mips_rtc_get_time(void);
  38. #ifdef CONFIG_KGDB
  39. extern void kgdb_config(void);
  40. #endif
  41. struct resource standard_io_resources[] = {
  42. { .name = "dma1", .start = 0x00, .end = 0x1f, .flags = IORESOURCE_BUSY },
  43. { .name = "timer", .start = 0x40, .end = 0x5f, .flags = IORESOURCE_BUSY },
  44. { .name = "keyboard", .start = 0x60, .end = 0x6f, .flags = IORESOURCE_BUSY },
  45. { .name = "dma page reg", .start = 0x80, .end = 0x8f, .flags = IORESOURCE_BUSY },
  46. { .name = "dma2", .start = 0xc0, .end = 0xdf, .flags = IORESOURCE_BUSY },
  47. };
  48. const char *get_system_type(void)
  49. {
  50. return "MIPS Malta";
  51. }
  52. #if defined(CONFIG_MIPS_MT_SMTC)
  53. const char display_string[] = " SMTC LINUX ON MALTA ";
  54. #else
  55. const char display_string[] = " LINUX ON MALTA ";
  56. #endif /* CONFIG_MIPS_MT_SMTC */
  57. #ifdef CONFIG_BLK_DEV_FD
  58. void __init fd_activate(void)
  59. {
  60. /*
  61. * Activate Floppy Controller in the SMSC FDC37M817 Super I/O
  62. * Controller.
  63. * Done by YAMON 2.00 onwards
  64. */
  65. /* Entering config state. */
  66. SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG);
  67. /* Activate floppy controller. */
  68. SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG);
  69. SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG);
  70. SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG);
  71. SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG);
  72. /* Exit config state. */
  73. SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG);
  74. }
  75. #endif
  76. void __init plat_mem_setup(void)
  77. {
  78. unsigned int i;
  79. mips_pcibios_init();
  80. /* Request I/O space for devices used on the Malta board. */
  81. for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
  82. request_resource(&ioport_resource, standard_io_resources+i);
  83. /*
  84. * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge.
  85. */
  86. enable_dma(4);
  87. #ifdef CONFIG_KGDB
  88. kgdb_config();
  89. #endif
  90. if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO) {
  91. char *argptr;
  92. argptr = prom_getcmdline();
  93. if (strstr(argptr, "debug")) {
  94. BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE;
  95. printk("Enabled Bonito debug mode\n");
  96. }
  97. else
  98. BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE;
  99. #ifdef CONFIG_DMA_COHERENT
  100. if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) {
  101. BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN;
  102. printk("Enabled Bonito CPU coherency\n");
  103. argptr = prom_getcmdline();
  104. if (strstr(argptr, "iobcuncached")) {
  105. BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN;
  106. BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG &
  107. ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
  108. BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
  109. printk("Disabled Bonito IOBC coherency\n");
  110. }
  111. else {
  112. BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN;
  113. BONITO_PCIMEMBASECFG |=
  114. (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
  115. BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
  116. printk("Enabled Bonito IOBC coherency\n");
  117. }
  118. }
  119. else
  120. panic("Hardware DMA cache coherency not supported");
  121. #endif
  122. }
  123. #ifdef CONFIG_DMA_COHERENT
  124. else {
  125. panic("Hardware DMA cache coherency not supported");
  126. }
  127. #endif
  128. #ifdef CONFIG_BLK_DEV_IDE
  129. /* Check PCI clock */
  130. {
  131. unsigned int __iomem *jmpr_p = (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
  132. int jmpr = (readw(jmpr_p) >> 2) & 0x07;
  133. static const int pciclocks[] __initdata = {
  134. 33, 20, 25, 30, 12, 16, 37, 10
  135. };
  136. int pciclock = pciclocks[jmpr];
  137. char *argptr = prom_getcmdline();
  138. if (pciclock != 33 && !strstr (argptr, "idebus=")) {
  139. printk("WARNING: PCI clock is %dMHz, setting idebus\n", pciclock);
  140. argptr += strlen(argptr);
  141. sprintf(argptr, " idebus=%d", pciclock);
  142. if (pciclock < 20 || pciclock > 66)
  143. printk("WARNING: IDE timing calculations will be incorrect\n");
  144. }
  145. }
  146. #endif
  147. #ifdef CONFIG_BLK_DEV_FD
  148. fd_activate();
  149. #endif
  150. #ifdef CONFIG_VT
  151. #if defined(CONFIG_VGA_CONSOLE)
  152. screen_info = (struct screen_info) {
  153. 0, 25, /* orig-x, orig-y */
  154. 0, /* unused */
  155. 0, /* orig-video-page */
  156. 0, /* orig-video-mode */
  157. 80, /* orig-video-cols */
  158. 0, 0, 0, /* ega_ax, ega_bx, ega_cx */
  159. 25, /* orig-video-lines */
  160. VIDEO_TYPE_VGAC, /* orig-video-isVGA */
  161. 16 /* orig-video-points */
  162. };
  163. #endif
  164. #endif
  165. mips_reboot_setup();
  166. }