w1-gpio.c 4.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218
  1. /*
  2. * w1-gpio - GPIO w1 bus master driver
  3. *
  4. * Copyright (C) 2007 Ville Syrjala <syrjala@sci.fi>
  5. *
  6. * This program is free software; you can redistribute it and/or modify
  7. * it under the terms of the GNU General Public License version 2
  8. * as published by the Free Software Foundation.
  9. */
  10. #include <linux/init.h>
  11. #include <linux/module.h>
  12. #include <linux/platform_device.h>
  13. #include <linux/slab.h>
  14. #include <linux/w1-gpio.h>
  15. #include <linux/gpio.h>
  16. #include <linux/of_platform.h>
  17. #include <linux/of_gpio.h>
  18. #include <linux/err.h>
  19. #include <linux/of.h>
  20. #include "../w1.h"
  21. #include "../w1_int.h"
  22. static void w1_gpio_write_bit_dir(void *data, u8 bit)
  23. {
  24. struct w1_gpio_platform_data *pdata = data;
  25. if (bit)
  26. gpio_direction_input(pdata->pin);
  27. else
  28. gpio_direction_output(pdata->pin, 0);
  29. }
  30. static void w1_gpio_write_bit_val(void *data, u8 bit)
  31. {
  32. struct w1_gpio_platform_data *pdata = data;
  33. gpio_set_value(pdata->pin, bit);
  34. }
  35. static u8 w1_gpio_read_bit(void *data)
  36. {
  37. struct w1_gpio_platform_data *pdata = data;
  38. return gpio_get_value(pdata->pin) ? 1 : 0;
  39. }
  40. #if defined(CONFIG_OF)
  41. static struct of_device_id w1_gpio_dt_ids[] = {
  42. { .compatible = "w1-gpio" },
  43. {}
  44. };
  45. MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids);
  46. #endif
  47. static int w1_gpio_probe_dt(struct platform_device *pdev)
  48. {
  49. struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
  50. struct device_node *np = pdev->dev.of_node;
  51. pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
  52. if (!pdata)
  53. return -ENOMEM;
  54. if (of_get_property(np, "linux,open-drain", NULL))
  55. pdata->is_open_drain = 1;
  56. pdata->pin = of_get_gpio(np, 0);
  57. pdata->ext_pullup_enable_pin = of_get_gpio(np, 1);
  58. pdev->dev.platform_data = pdata;
  59. return 0;
  60. }
  61. static int w1_gpio_probe(struct platform_device *pdev)
  62. {
  63. struct w1_bus_master *master;
  64. struct w1_gpio_platform_data *pdata;
  65. int err;
  66. if (of_have_populated_dt()) {
  67. err = w1_gpio_probe_dt(pdev);
  68. if (err < 0) {
  69. dev_err(&pdev->dev, "Failed to parse DT\n");
  70. return err;
  71. }
  72. }
  73. pdata = pdev->dev.platform_data;
  74. if (!pdata) {
  75. dev_err(&pdev->dev, "No configuration data\n");
  76. return -ENXIO;
  77. }
  78. master = kzalloc(sizeof(struct w1_bus_master), GFP_KERNEL);
  79. if (!master) {
  80. dev_err(&pdev->dev, "Out of memory\n");
  81. return -ENOMEM;
  82. }
  83. err = gpio_request(pdata->pin, "w1");
  84. if (err) {
  85. dev_err(&pdev->dev, "gpio_request (pin) failed\n");
  86. goto free_master;
  87. }
  88. if (gpio_is_valid(pdata->ext_pullup_enable_pin)) {
  89. err = gpio_request_one(pdata->ext_pullup_enable_pin,
  90. GPIOF_INIT_LOW, "w1 pullup");
  91. if (err < 0) {
  92. dev_err(&pdev->dev, "gpio_request_one "
  93. "(ext_pullup_enable_pin) failed\n");
  94. goto free_gpio;
  95. }
  96. }
  97. master->data = pdata;
  98. master->read_bit = w1_gpio_read_bit;
  99. if (pdata->is_open_drain) {
  100. gpio_direction_output(pdata->pin, 1);
  101. master->write_bit = w1_gpio_write_bit_val;
  102. } else {
  103. gpio_direction_input(pdata->pin);
  104. master->write_bit = w1_gpio_write_bit_dir;
  105. }
  106. err = w1_add_master_device(master);
  107. if (err) {
  108. dev_err(&pdev->dev, "w1_add_master device failed\n");
  109. goto free_gpio_ext_pu;
  110. }
  111. if (pdata->enable_external_pullup)
  112. pdata->enable_external_pullup(1);
  113. if (gpio_is_valid(pdata->ext_pullup_enable_pin))
  114. gpio_set_value(pdata->ext_pullup_enable_pin, 1);
  115. platform_set_drvdata(pdev, master);
  116. return 0;
  117. free_gpio_ext_pu:
  118. if (gpio_is_valid(pdata->ext_pullup_enable_pin))
  119. gpio_free(pdata->ext_pullup_enable_pin);
  120. free_gpio:
  121. gpio_free(pdata->pin);
  122. free_master:
  123. kfree(master);
  124. return err;
  125. }
  126. static int w1_gpio_remove(struct platform_device *pdev)
  127. {
  128. struct w1_bus_master *master = platform_get_drvdata(pdev);
  129. struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
  130. if (pdata->enable_external_pullup)
  131. pdata->enable_external_pullup(0);
  132. if (gpio_is_valid(pdata->ext_pullup_enable_pin))
  133. gpio_set_value(pdata->ext_pullup_enable_pin, 0);
  134. w1_remove_master_device(master);
  135. gpio_free(pdata->pin);
  136. kfree(master);
  137. return 0;
  138. }
  139. #ifdef CONFIG_PM
  140. static int w1_gpio_suspend(struct platform_device *pdev, pm_message_t state)
  141. {
  142. struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
  143. if (pdata->enable_external_pullup)
  144. pdata->enable_external_pullup(0);
  145. return 0;
  146. }
  147. static int w1_gpio_resume(struct platform_device *pdev)
  148. {
  149. struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
  150. if (pdata->enable_external_pullup)
  151. pdata->enable_external_pullup(1);
  152. return 0;
  153. }
  154. #else
  155. #define w1_gpio_suspend NULL
  156. #define w1_gpio_resume NULL
  157. #endif
  158. static struct platform_driver w1_gpio_driver = {
  159. .driver = {
  160. .name = "w1-gpio",
  161. .owner = THIS_MODULE,
  162. .of_match_table = of_match_ptr(w1_gpio_dt_ids),
  163. },
  164. .probe = w1_gpio_probe,
  165. .remove = w1_gpio_remove,
  166. .suspend = w1_gpio_suspend,
  167. .resume = w1_gpio_resume,
  168. };
  169. module_platform_driver(w1_gpio_driver);
  170. MODULE_DESCRIPTION("GPIO w1 bus master driver");
  171. MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
  172. MODULE_LICENSE("GPL");