pci.h 4.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162
  1. /*
  2. * This file is subject to the terms and conditions of the GNU General Public
  3. * License. See the file "COPYING" in the main directory of this archive
  4. * for more details.
  5. */
  6. #ifndef _ASM_PCI_H
  7. #define _ASM_PCI_H
  8. #include <linux/mm.h>
  9. #ifdef __KERNEL__
  10. /*
  11. * This file essentially defines the interface between board
  12. * specific PCI code and MIPS common PCI code. Should potentially put
  13. * into include/asm/pci.h file.
  14. */
  15. #include <linux/ioport.h>
  16. #include <linux/of.h>
  17. /*
  18. * Each pci channel is a top-level PCI bus seem by CPU. A machine with
  19. * multiple PCI channels may have multiple PCI host controllers or a
  20. * single controller supporting multiple channels.
  21. */
  22. struct pci_controller {
  23. struct pci_controller *next;
  24. struct pci_bus *bus;
  25. struct device_node *of_node;
  26. struct pci_ops *pci_ops;
  27. struct resource *mem_resource;
  28. unsigned long mem_offset;
  29. struct resource *io_resource;
  30. unsigned long io_offset;
  31. unsigned long io_map_base;
  32. unsigned int index;
  33. /* For compatibility with current (as of July 2003) pciutils
  34. and XFree86. Eventually will be removed. */
  35. unsigned int need_domain_info;
  36. int iommu;
  37. /* Optional access methods for reading/writing the bus number
  38. of the PCI controller */
  39. int (*get_busno)(void);
  40. void (*set_busno)(int busno);
  41. };
  42. /*
  43. * Used by boards to register their PCI busses before the actual scanning.
  44. */
  45. extern void register_pci_controller(struct pci_controller *hose);
  46. /*
  47. * board supplied pci irq fixup routine
  48. */
  49. extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
  50. /* Can be used to override the logic in pci_scan_bus for skipping
  51. already-configured bus numbers - to be used for buggy BIOSes
  52. or architectures with incomplete PCI setup by the loader */
  53. extern unsigned int pcibios_assign_all_busses(void);
  54. extern unsigned long PCIBIOS_MIN_IO;
  55. extern unsigned long PCIBIOS_MIN_MEM;
  56. #define PCIBIOS_MIN_CARDBUS_IO 0x4000
  57. extern void pcibios_set_master(struct pci_dev *dev);
  58. static inline void pcibios_penalize_isa_irq(int irq, int active)
  59. {
  60. /* We don't do dynamic PCI IRQ allocation */
  61. }
  62. #define HAVE_PCI_MMAP
  63. extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
  64. enum pci_mmap_state mmap_state, int write_combine);
  65. #define HAVE_ARCH_PCI_RESOURCE_TO_USER
  66. static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
  67. const struct resource *rsrc, resource_size_t *start,
  68. resource_size_t *end)
  69. {
  70. phys_t size = resource_size(rsrc);
  71. *start = fixup_bigphys_addr(rsrc->start, size);
  72. *end = rsrc->start + size;
  73. }
  74. /*
  75. * Dynamic DMA mapping stuff.
  76. * MIPS has everything mapped statically.
  77. */
  78. #include <linux/types.h>
  79. #include <linux/slab.h>
  80. #include <asm/scatterlist.h>
  81. #include <linux/string.h>
  82. #include <asm/io.h>
  83. #include <asm-generic/pci-bridge.h>
  84. struct pci_dev;
  85. /*
  86. * The PCI address space does equal the physical memory address space. The
  87. * networking and block device layers use this boolean for bounce buffer
  88. * decisions. This is set if any hose does not have an IOMMU.
  89. */
  90. extern unsigned int PCI_DMA_BUS_IS_PHYS;
  91. #ifdef CONFIG_PCI
  92. static inline void pci_dma_burst_advice(struct pci_dev *pdev,
  93. enum pci_dma_burst_strategy *strat,
  94. unsigned long *strategy_parameter)
  95. {
  96. *strat = PCI_DMA_BURST_INFINITY;
  97. *strategy_parameter = ~0UL;
  98. }
  99. #endif
  100. #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
  101. static inline int pci_proc_domain(struct pci_bus *bus)
  102. {
  103. struct pci_controller *hose = bus->sysdata;
  104. return hose->need_domain_info;
  105. }
  106. #endif /* __KERNEL__ */
  107. /* implement the pci_ DMA API in terms of the generic device dma_ one */
  108. #include <asm-generic/pci-dma-compat.h>
  109. /* Do platform specific device initialization at pci_enable_device() time */
  110. extern int pcibios_plat_dev_init(struct pci_dev *dev);
  111. /* Chances are this interrupt is wired PC-style ... */
  112. static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
  113. {
  114. return channel ? 15 : 14;
  115. }
  116. extern char * (*pcibios_plat_setup)(char *str);
  117. #ifdef CONFIG_OF
  118. /* this function parses memory ranges from a device node */
  119. extern void pci_load_of_ranges(struct pci_controller *hose,
  120. struct device_node *node);
  121. #else
  122. static inline void pci_load_of_ranges(struct pci_controller *hose,
  123. struct device_node *node) {}
  124. #endif
  125. #endif /* _ASM_PCI_H */