setup.c 8.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345
  1. /*
  2. * Maple (970 eval board) setup code
  3. *
  4. * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
  5. * IBM Corp.
  6. *
  7. * This program is free software; you can redistribute it and/or
  8. * modify it under the terms of the GNU General Public License
  9. * as published by the Free Software Foundation; either version
  10. * 2 of the License, or (at your option) any later version.
  11. *
  12. */
  13. #undef DEBUG
  14. #include <linux/init.h>
  15. #include <linux/errno.h>
  16. #include <linux/sched.h>
  17. #include <linux/kernel.h>
  18. #include <linux/mm.h>
  19. #include <linux/stddef.h>
  20. #include <linux/unistd.h>
  21. #include <linux/ptrace.h>
  22. #include <linux/slab.h>
  23. #include <linux/user.h>
  24. #include <linux/a.out.h>
  25. #include <linux/tty.h>
  26. #include <linux/string.h>
  27. #include <linux/delay.h>
  28. #include <linux/ioport.h>
  29. #include <linux/major.h>
  30. #include <linux/initrd.h>
  31. #include <linux/vt_kern.h>
  32. #include <linux/console.h>
  33. #include <linux/ide.h>
  34. #include <linux/pci.h>
  35. #include <linux/adb.h>
  36. #include <linux/cuda.h>
  37. #include <linux/pmu.h>
  38. #include <linux/irq.h>
  39. #include <linux/seq_file.h>
  40. #include <linux/root_dev.h>
  41. #include <linux/serial.h>
  42. #include <linux/smp.h>
  43. #include <asm/processor.h>
  44. #include <asm/sections.h>
  45. #include <asm/prom.h>
  46. #include <asm/system.h>
  47. #include <asm/pgtable.h>
  48. #include <asm/bitops.h>
  49. #include <asm/io.h>
  50. #include <asm/kexec.h>
  51. #include <asm/pci-bridge.h>
  52. #include <asm/iommu.h>
  53. #include <asm/machdep.h>
  54. #include <asm/dma.h>
  55. #include <asm/cputable.h>
  56. #include <asm/time.h>
  57. #include <asm/of_device.h>
  58. #include <asm/lmb.h>
  59. #include <asm/mpic.h>
  60. #include <asm/rtas.h>
  61. #include <asm/udbg.h>
  62. #include <asm/nvram.h>
  63. #include "maple.h"
  64. #ifdef DEBUG
  65. #define DBG(fmt...) udbg_printf(fmt)
  66. #else
  67. #define DBG(fmt...)
  68. #endif
  69. static unsigned long maple_find_nvram_base(void)
  70. {
  71. struct device_node *rtcs;
  72. unsigned long result = 0;
  73. /* find NVRAM device */
  74. rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111");
  75. if (rtcs) {
  76. struct resource r;
  77. if (of_address_to_resource(rtcs, 0, &r)) {
  78. printk(KERN_EMERG "Maple: Unable to translate NVRAM"
  79. " address\n");
  80. goto bail;
  81. }
  82. if (!(r.flags & IORESOURCE_IO)) {
  83. printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n");
  84. goto bail;
  85. }
  86. result = r.start;
  87. } else
  88. printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
  89. bail:
  90. of_node_put(rtcs);
  91. return result;
  92. }
  93. static void maple_restart(char *cmd)
  94. {
  95. unsigned int maple_nvram_base;
  96. const unsigned int *maple_nvram_offset, *maple_nvram_command;
  97. struct device_node *sp;
  98. maple_nvram_base = maple_find_nvram_base();
  99. if (maple_nvram_base == 0)
  100. goto fail;
  101. /* find service processor device */
  102. sp = of_find_node_by_name(NULL, "service-processor");
  103. if (!sp) {
  104. printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
  105. goto fail;
  106. }
  107. maple_nvram_offset = get_property(sp, "restart-addr", NULL);
  108. maple_nvram_command = get_property(sp, "restart-value", NULL);
  109. of_node_put(sp);
  110. /* send command */
  111. outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);
  112. for (;;) ;
  113. fail:
  114. printk(KERN_EMERG "Maple: Manual Restart Required\n");
  115. }
  116. static void maple_power_off(void)
  117. {
  118. unsigned int maple_nvram_base;
  119. const unsigned int *maple_nvram_offset, *maple_nvram_command;
  120. struct device_node *sp;
  121. maple_nvram_base = maple_find_nvram_base();
  122. if (maple_nvram_base == 0)
  123. goto fail;
  124. /* find service processor device */
  125. sp = of_find_node_by_name(NULL, "service-processor");
  126. if (!sp) {
  127. printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
  128. goto fail;
  129. }
  130. maple_nvram_offset = get_property(sp, "power-off-addr", NULL);
  131. maple_nvram_command = get_property(sp, "power-off-value", NULL);
  132. of_node_put(sp);
  133. /* send command */
  134. outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);
  135. for (;;) ;
  136. fail:
  137. printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
  138. }
  139. static void maple_halt(void)
  140. {
  141. maple_power_off();
  142. }
  143. #ifdef CONFIG_SMP
  144. struct smp_ops_t maple_smp_ops = {
  145. .probe = smp_mpic_probe,
  146. .message_pass = smp_mpic_message_pass,
  147. .kick_cpu = smp_generic_kick_cpu,
  148. .setup_cpu = smp_mpic_setup_cpu,
  149. .give_timebase = smp_generic_give_timebase,
  150. .take_timebase = smp_generic_take_timebase,
  151. };
  152. #endif /* CONFIG_SMP */
  153. static void __init maple_use_rtas_reboot_and_halt_if_present(void)
  154. {
  155. if (rtas_service_present("system-reboot") &&
  156. rtas_service_present("power-off")) {
  157. ppc_md.restart = rtas_restart;
  158. ppc_md.power_off = rtas_power_off;
  159. ppc_md.halt = rtas_halt;
  160. }
  161. }
  162. void __init maple_setup_arch(void)
  163. {
  164. /* init to some ~sane value until calibrate_delay() runs */
  165. loops_per_jiffy = 50000000;
  166. /* Setup SMP callback */
  167. #ifdef CONFIG_SMP
  168. smp_ops = &maple_smp_ops;
  169. #endif
  170. /* Lookup PCI hosts */
  171. maple_pci_init();
  172. #ifdef CONFIG_DUMMY_CONSOLE
  173. conswitchp = &dummy_con;
  174. #endif
  175. maple_use_rtas_reboot_and_halt_if_present();
  176. printk(KERN_DEBUG "Using native/NAP idle loop\n");
  177. mmio_nvram_init();
  178. }
  179. /*
  180. * Early initialization.
  181. */
  182. static void __init maple_init_early(void)
  183. {
  184. DBG(" -> maple_init_early\n");
  185. iommu_init_early_dart();
  186. DBG(" <- maple_init_early\n");
  187. }
  188. /*
  189. * This is almost identical to pSeries and CHRP. We need to make that
  190. * code generic at one point, with appropriate bits in the device-tree to
  191. * identify the presence of an HT APIC
  192. */
  193. static void __init maple_init_IRQ(void)
  194. {
  195. struct device_node *root, *np, *mpic_node = NULL;
  196. const unsigned int *opprop;
  197. unsigned long openpic_addr = 0;
  198. int naddr, n, i, opplen, has_isus = 0;
  199. struct mpic *mpic;
  200. unsigned int flags = MPIC_PRIMARY;
  201. /* Locate MPIC in the device-tree. Note that there is a bug
  202. * in Maple device-tree where the type of the controller is
  203. * open-pic and not interrupt-controller
  204. */
  205. for_each_node_by_type(np, "interrupt-controller")
  206. if (device_is_compatible(np, "open-pic")) {
  207. mpic_node = np;
  208. break;
  209. }
  210. if (mpic_node == NULL)
  211. for_each_node_by_type(np, "open-pic") {
  212. mpic_node = np;
  213. break;
  214. }
  215. if (mpic_node == NULL) {
  216. printk(KERN_ERR
  217. "Failed to locate the MPIC interrupt controller\n");
  218. return;
  219. }
  220. /* Find address list in /platform-open-pic */
  221. root = of_find_node_by_path("/");
  222. naddr = prom_n_addr_cells(root);
  223. opprop = get_property(root, "platform-open-pic", &opplen);
  224. if (opprop != 0) {
  225. openpic_addr = of_read_number(opprop, naddr);
  226. has_isus = (opplen > naddr);
  227. printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
  228. openpic_addr, has_isus);
  229. }
  230. BUG_ON(openpic_addr == 0);
  231. /* Check for a big endian MPIC */
  232. if (get_property(np, "big-endian", NULL) != NULL)
  233. flags |= MPIC_BIG_ENDIAN;
  234. /* XXX Maple specific bits */
  235. flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET;
  236. /* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */
  237. flags |= MPIC_BIG_ENDIAN;
  238. /* Setup the openpic driver. More device-tree junks, we hard code no
  239. * ISUs for now. I'll have to revisit some stuffs with the folks doing
  240. * the firmware for those
  241. */
  242. mpic = mpic_alloc(mpic_node, openpic_addr, flags,
  243. /*has_isus ? 16 :*/ 0, 0, " MPIC ");
  244. BUG_ON(mpic == NULL);
  245. /* Add ISUs */
  246. opplen /= sizeof(u32);
  247. for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
  248. unsigned long isuaddr = of_read_number(opprop + i, naddr);
  249. mpic_assign_isu(mpic, n, isuaddr);
  250. }
  251. /* All ISUs are setup, complete initialization */
  252. mpic_init(mpic);
  253. ppc_md.get_irq = mpic_get_irq;
  254. of_node_put(mpic_node);
  255. of_node_put(root);
  256. }
  257. static void __init maple_progress(char *s, unsigned short hex)
  258. {
  259. printk("*** %04x : %s\n", hex, s ? s : "");
  260. }
  261. /*
  262. * Called very early, MMU is off, device-tree isn't unflattened
  263. */
  264. static int __init maple_probe(void)
  265. {
  266. unsigned long root = of_get_flat_dt_root();
  267. if (!of_flat_dt_is_compatible(root, "Momentum,Maple") &&
  268. !of_flat_dt_is_compatible(root, "Momentum,Apache"))
  269. return 0;
  270. /*
  271. * On U3, the DART (iommu) must be allocated now since it
  272. * has an impact on htab_initialize (due to the large page it
  273. * occupies having to be broken up so the DART itself is not
  274. * part of the cacheable linar mapping
  275. */
  276. alloc_dart_table();
  277. hpte_init_native();
  278. return 1;
  279. }
  280. define_machine(maple_md) {
  281. .name = "Maple",
  282. .probe = maple_probe,
  283. .setup_arch = maple_setup_arch,
  284. .init_early = maple_init_early,
  285. .init_IRQ = maple_init_IRQ,
  286. .pci_irq_fixup = maple_pci_irq_fixup,
  287. .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq,
  288. .restart = maple_restart,
  289. .power_off = maple_power_off,
  290. .halt = maple_halt,
  291. .get_boot_time = maple_get_boot_time,
  292. .set_rtc_time = maple_set_rtc_time,
  293. .get_rtc_time = maple_get_rtc_time,
  294. .calibrate_decr = generic_calibrate_decr,
  295. .progress = maple_progress,
  296. .power_save = power4_idle,
  297. #ifdef CONFIG_KEXEC
  298. .machine_kexec = default_machine_kexec,
  299. .machine_kexec_prepare = default_machine_kexec_prepare,
  300. .machine_crash_shutdown = default_machine_crash_shutdown,
  301. #endif
  302. };