generic.c 10.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456
  1. /*
  2. * linux/arch/arm/mach-sa1100/generic.c
  3. *
  4. * Author: Nicolas Pitre
  5. *
  6. * Code common to all SA11x0 machines.
  7. *
  8. * This program is free software; you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License version 2 as
  10. * published by the Free Software Foundation.
  11. */
  12. #include <linux/module.h>
  13. #include <linux/kernel.h>
  14. #include <linux/init.h>
  15. #include <linux/delay.h>
  16. #include <linux/pm.h>
  17. #include <linux/cpufreq.h>
  18. #include <linux/ioport.h>
  19. #include <linux/sched.h> /* just for sched_clock() - funny that */
  20. #include <linux/platform_device.h>
  21. #include <asm/div64.h>
  22. #include <asm/cnt32_to_63.h>
  23. #include <asm/hardware.h>
  24. #include <asm/system.h>
  25. #include <asm/pgtable.h>
  26. #include <asm/mach/map.h>
  27. #include <asm/mach/flash.h>
  28. #include <asm/irq.h>
  29. #include "generic.h"
  30. #define NR_FREQS 16
  31. /*
  32. * This table is setup for a 3.6864MHz Crystal.
  33. */
  34. static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
  35. 590, /* 59.0 MHz */
  36. 737, /* 73.7 MHz */
  37. 885, /* 88.5 MHz */
  38. 1032, /* 103.2 MHz */
  39. 1180, /* 118.0 MHz */
  40. 1327, /* 132.7 MHz */
  41. 1475, /* 147.5 MHz */
  42. 1622, /* 162.2 MHz */
  43. 1769, /* 176.9 MHz */
  44. 1917, /* 191.7 MHz */
  45. 2064, /* 206.4 MHz */
  46. 2212, /* 221.2 MHz */
  47. 2359, /* 235.9 MHz */
  48. 2507, /* 250.7 MHz */
  49. 2654, /* 265.4 MHz */
  50. 2802 /* 280.2 MHz */
  51. };
  52. #if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
  53. /* rounds up(!) */
  54. unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
  55. {
  56. int i;
  57. khz /= 100;
  58. for (i = 0; i < NR_FREQS; i++)
  59. if (cclk_frequency_100khz[i] >= khz)
  60. break;
  61. return i;
  62. }
  63. unsigned int sa11x0_ppcr_to_freq(unsigned int idx)
  64. {
  65. unsigned int freq = 0;
  66. if (idx < NR_FREQS)
  67. freq = cclk_frequency_100khz[idx] * 100;
  68. return freq;
  69. }
  70. /* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
  71. * this platform, anyway.
  72. */
  73. int sa11x0_verify_speed(struct cpufreq_policy *policy)
  74. {
  75. unsigned int tmp;
  76. if (policy->cpu)
  77. return -EINVAL;
  78. cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
  79. /* make sure that at least one frequency is within the policy */
  80. tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100;
  81. if (tmp > policy->max)
  82. policy->max = tmp;
  83. cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
  84. return 0;
  85. }
  86. unsigned int sa11x0_getspeed(unsigned int cpu)
  87. {
  88. if (cpu)
  89. return 0;
  90. return cclk_frequency_100khz[PPCR & 0xf] * 100;
  91. }
  92. #else
  93. /*
  94. * We still need to provide this so building without cpufreq works.
  95. */
  96. unsigned int cpufreq_get(unsigned int cpu)
  97. {
  98. return cclk_frequency_100khz[PPCR & 0xf] * 100;
  99. }
  100. EXPORT_SYMBOL(cpufreq_get);
  101. #endif
  102. /*
  103. * This is the SA11x0 sched_clock implementation. This has
  104. * a resolution of 271ns, and a maximum value of 32025597s (370 days).
  105. *
  106. * The return value is guaranteed to be monotonic in that range as
  107. * long as there is always less than 582 seconds between successive
  108. * calls to this function.
  109. *
  110. * ( * 1E9 / 3686400 => * 78125 / 288)
  111. */
  112. unsigned long long sched_clock(void)
  113. {
  114. unsigned long long v = cnt32_to_63(OSCR);
  115. /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
  116. v *= 78125<<1;
  117. do_div(v, 288<<1);
  118. return v;
  119. }
  120. /*
  121. * Default power-off for SA1100
  122. */
  123. static void sa1100_power_off(void)
  124. {
  125. mdelay(100);
  126. local_irq_disable();
  127. /* disable internal oscillator, float CS lines */
  128. PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
  129. /* enable wake-up on GPIO0 (Assabet...) */
  130. PWER = GFER = GRER = 1;
  131. /*
  132. * set scratchpad to zero, just in case it is used as a
  133. * restart address by the bootloader.
  134. */
  135. PSPR = 0;
  136. /* enter sleep mode */
  137. PMCR = PMCR_SF;
  138. }
  139. static struct resource sa11x0udc_resources[] = {
  140. [0] = {
  141. .start = 0x80000000,
  142. .end = 0x8000ffff,
  143. .flags = IORESOURCE_MEM,
  144. },
  145. };
  146. static u64 sa11x0udc_dma_mask = 0xffffffffUL;
  147. static struct platform_device sa11x0udc_device = {
  148. .name = "sa11x0-udc",
  149. .id = -1,
  150. .dev = {
  151. .dma_mask = &sa11x0udc_dma_mask,
  152. .coherent_dma_mask = 0xffffffff,
  153. },
  154. .num_resources = ARRAY_SIZE(sa11x0udc_resources),
  155. .resource = sa11x0udc_resources,
  156. };
  157. static struct resource sa11x0uart1_resources[] = {
  158. [0] = {
  159. .start = 0x80010000,
  160. .end = 0x8001ffff,
  161. .flags = IORESOURCE_MEM,
  162. },
  163. };
  164. static struct platform_device sa11x0uart1_device = {
  165. .name = "sa11x0-uart",
  166. .id = 1,
  167. .num_resources = ARRAY_SIZE(sa11x0uart1_resources),
  168. .resource = sa11x0uart1_resources,
  169. };
  170. static struct resource sa11x0uart3_resources[] = {
  171. [0] = {
  172. .start = 0x80050000,
  173. .end = 0x8005ffff,
  174. .flags = IORESOURCE_MEM,
  175. },
  176. };
  177. static struct platform_device sa11x0uart3_device = {
  178. .name = "sa11x0-uart",
  179. .id = 3,
  180. .num_resources = ARRAY_SIZE(sa11x0uart3_resources),
  181. .resource = sa11x0uart3_resources,
  182. };
  183. static struct resource sa11x0mcp_resources[] = {
  184. [0] = {
  185. .start = 0x80060000,
  186. .end = 0x8006ffff,
  187. .flags = IORESOURCE_MEM,
  188. },
  189. };
  190. static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
  191. static struct platform_device sa11x0mcp_device = {
  192. .name = "sa11x0-mcp",
  193. .id = -1,
  194. .dev = {
  195. .dma_mask = &sa11x0mcp_dma_mask,
  196. .coherent_dma_mask = 0xffffffff,
  197. },
  198. .num_resources = ARRAY_SIZE(sa11x0mcp_resources),
  199. .resource = sa11x0mcp_resources,
  200. };
  201. void sa11x0_set_mcp_data(struct mcp_plat_data *data)
  202. {
  203. sa11x0mcp_device.dev.platform_data = data;
  204. }
  205. static struct resource sa11x0ssp_resources[] = {
  206. [0] = {
  207. .start = 0x80070000,
  208. .end = 0x8007ffff,
  209. .flags = IORESOURCE_MEM,
  210. },
  211. };
  212. static u64 sa11x0ssp_dma_mask = 0xffffffffUL;
  213. static struct platform_device sa11x0ssp_device = {
  214. .name = "sa11x0-ssp",
  215. .id = -1,
  216. .dev = {
  217. .dma_mask = &sa11x0ssp_dma_mask,
  218. .coherent_dma_mask = 0xffffffff,
  219. },
  220. .num_resources = ARRAY_SIZE(sa11x0ssp_resources),
  221. .resource = sa11x0ssp_resources,
  222. };
  223. static struct resource sa11x0fb_resources[] = {
  224. [0] = {
  225. .start = 0xb0100000,
  226. .end = 0xb010ffff,
  227. .flags = IORESOURCE_MEM,
  228. },
  229. [1] = {
  230. .start = IRQ_LCD,
  231. .end = IRQ_LCD,
  232. .flags = IORESOURCE_IRQ,
  233. },
  234. };
  235. static struct platform_device sa11x0fb_device = {
  236. .name = "sa11x0-fb",
  237. .id = -1,
  238. .dev = {
  239. .coherent_dma_mask = 0xffffffff,
  240. },
  241. .num_resources = ARRAY_SIZE(sa11x0fb_resources),
  242. .resource = sa11x0fb_resources,
  243. };
  244. static struct platform_device sa11x0pcmcia_device = {
  245. .name = "sa11x0-pcmcia",
  246. .id = -1,
  247. };
  248. static struct platform_device sa11x0mtd_device = {
  249. .name = "flash",
  250. .id = -1,
  251. };
  252. void sa11x0_set_flash_data(struct flash_platform_data *flash,
  253. struct resource *res, int nr)
  254. {
  255. flash->name = "sa1100";
  256. sa11x0mtd_device.dev.platform_data = flash;
  257. sa11x0mtd_device.resource = res;
  258. sa11x0mtd_device.num_resources = nr;
  259. }
  260. static struct resource sa11x0ir_resources[] = {
  261. {
  262. .start = __PREG(Ser2UTCR0),
  263. .end = __PREG(Ser2UTCR0) + 0x24 - 1,
  264. .flags = IORESOURCE_MEM,
  265. }, {
  266. .start = __PREG(Ser2HSCR0),
  267. .end = __PREG(Ser2HSCR0) + 0x1c - 1,
  268. .flags = IORESOURCE_MEM,
  269. }, {
  270. .start = __PREG(Ser2HSCR2),
  271. .end = __PREG(Ser2HSCR2) + 0x04 - 1,
  272. .flags = IORESOURCE_MEM,
  273. }, {
  274. .start = IRQ_Ser2ICP,
  275. .end = IRQ_Ser2ICP,
  276. .flags = IORESOURCE_IRQ,
  277. }
  278. };
  279. static struct platform_device sa11x0ir_device = {
  280. .name = "sa11x0-ir",
  281. .id = -1,
  282. .num_resources = ARRAY_SIZE(sa11x0ir_resources),
  283. .resource = sa11x0ir_resources,
  284. };
  285. void sa11x0_set_irda_data(struct irda_platform_data *irda)
  286. {
  287. sa11x0ir_device.dev.platform_data = irda;
  288. }
  289. static struct platform_device sa11x0rtc_device = {
  290. .name = "sa1100-rtc",
  291. .id = -1,
  292. };
  293. static struct platform_device *sa11x0_devices[] __initdata = {
  294. &sa11x0udc_device,
  295. &sa11x0uart1_device,
  296. &sa11x0uart3_device,
  297. &sa11x0mcp_device,
  298. &sa11x0ssp_device,
  299. &sa11x0pcmcia_device,
  300. &sa11x0fb_device,
  301. &sa11x0mtd_device,
  302. &sa11x0rtc_device,
  303. };
  304. static int __init sa1100_init(void)
  305. {
  306. pm_power_off = sa1100_power_off;
  307. if (sa11x0ir_device.dev.platform_data)
  308. platform_device_register(&sa11x0ir_device);
  309. return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
  310. }
  311. arch_initcall(sa1100_init);
  312. void (*sa1100fb_backlight_power)(int on);
  313. void (*sa1100fb_lcd_power)(int on);
  314. EXPORT_SYMBOL(sa1100fb_backlight_power);
  315. EXPORT_SYMBOL(sa1100fb_lcd_power);
  316. /*
  317. * Common I/O mapping:
  318. *
  319. * Typically, static virtual address mappings are as follow:
  320. *
  321. * 0xf0000000-0xf3ffffff: miscellaneous stuff (CPLDs, etc.)
  322. * 0xf4000000-0xf4ffffff: SA-1111
  323. * 0xf5000000-0xf5ffffff: reserved (used by cache flushing area)
  324. * 0xf6000000-0xfffeffff: reserved (internal SA1100 IO defined above)
  325. * 0xffff0000-0xffff0fff: SA1100 exception vectors
  326. * 0xffff2000-0xffff2fff: Minicache copy_user_page area
  327. *
  328. * Below 0xe8000000 is reserved for vm allocation.
  329. *
  330. * The machine specific code must provide the extra mapping beside the
  331. * default mapping provided here.
  332. */
  333. static struct map_desc standard_io_desc[] __initdata = {
  334. { /* PCM */
  335. .virtual = 0xf8000000,
  336. .pfn = __phys_to_pfn(0x80000000),
  337. .length = 0x00100000,
  338. .type = MT_DEVICE
  339. }, { /* SCM */
  340. .virtual = 0xfa000000,
  341. .pfn = __phys_to_pfn(0x90000000),
  342. .length = 0x00100000,
  343. .type = MT_DEVICE
  344. }, { /* MER */
  345. .virtual = 0xfc000000,
  346. .pfn = __phys_to_pfn(0xa0000000),
  347. .length = 0x00100000,
  348. .type = MT_DEVICE
  349. }, { /* LCD + DMA */
  350. .virtual = 0xfe000000,
  351. .pfn = __phys_to_pfn(0xb0000000),
  352. .length = 0x00200000,
  353. .type = MT_DEVICE
  354. },
  355. };
  356. void __init sa1100_map_io(void)
  357. {
  358. iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
  359. }
  360. /*
  361. * Disable the memory bus request/grant signals on the SA1110 to
  362. * ensure that we don't receive spurious memory requests. We set
  363. * the MBGNT signal false to ensure the SA1111 doesn't own the
  364. * SDRAM bus.
  365. */
  366. void __init sa1110_mb_disable(void)
  367. {
  368. unsigned long flags;
  369. local_irq_save(flags);
  370. PGSR &= ~GPIO_MBGNT;
  371. GPCR = GPIO_MBGNT;
  372. GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
  373. GAFR &= ~(GPIO_MBGNT | GPIO_MBREQ);
  374. local_irq_restore(flags);
  375. }
  376. /*
  377. * If the system is going to use the SA-1111 DMA engines, set up
  378. * the memory bus request/grant pins.
  379. */
  380. void __init sa1110_mb_enable(void)
  381. {
  382. unsigned long flags;
  383. local_irq_save(flags);
  384. PGSR &= ~GPIO_MBGNT;
  385. GPCR = GPIO_MBGNT;
  386. GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
  387. GAFR |= (GPIO_MBGNT | GPIO_MBREQ);
  388. TUCR |= TUCR_MR;
  389. local_irq_restore(flags);
  390. }