sta_info.h 11 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359
  1. /*
  2. * Copyright 2002-2005, Devicescape Software, Inc.
  3. *
  4. * This program is free software; you can redistribute it and/or modify
  5. * it under the terms of the GNU General Public License version 2 as
  6. * published by the Free Software Foundation.
  7. */
  8. #ifndef STA_INFO_H
  9. #define STA_INFO_H
  10. #include <linux/list.h>
  11. #include <linux/types.h>
  12. #include <linux/if_ether.h>
  13. #include "ieee80211_key.h"
  14. /**
  15. * enum ieee80211_sta_info_flags - Stations flags
  16. *
  17. * These flags are used with &struct sta_info's @flags member.
  18. *
  19. * @WLAN_STA_AUTH: Station is authenticated.
  20. * @WLAN_STA_ASSOC: Station is associated.
  21. * @WLAN_STA_PS: Station is in power-save mode
  22. * @WLAN_STA_AUTHORIZED: Station is authorized to send/receive traffic.
  23. * This bit is always checked so needs to be enabled for all stations
  24. * when virtual port control is not in use.
  25. * @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble
  26. * frames.
  27. * @WLAN_STA_ASSOC_AP: We're associated to that station, it is an AP.
  28. * @WLAN_STA_WME: Station is a QoS-STA.
  29. * @WLAN_STA_WDS: Station is one of our WDS peers.
  30. * @WLAN_STA_PSPOLL: Station has just PS-polled us.
  31. * @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
  32. * IEEE80211_TXCTL_CLEAR_PS_FILT control flag) when the next
  33. * frame to this station is transmitted.
  34. */
  35. enum ieee80211_sta_info_flags {
  36. WLAN_STA_AUTH = 1<<0,
  37. WLAN_STA_ASSOC = 1<<1,
  38. WLAN_STA_PS = 1<<2,
  39. WLAN_STA_AUTHORIZED = 1<<3,
  40. WLAN_STA_SHORT_PREAMBLE = 1<<4,
  41. WLAN_STA_ASSOC_AP = 1<<5,
  42. WLAN_STA_WME = 1<<6,
  43. WLAN_STA_WDS = 1<<7,
  44. WLAN_STA_PSPOLL = 1<<8,
  45. WLAN_STA_CLEAR_PS_FILT = 1<<9,
  46. };
  47. #define STA_TID_NUM 16
  48. #define ADDBA_RESP_INTERVAL HZ
  49. #define HT_AGG_MAX_RETRIES (0x3)
  50. #define HT_AGG_STATE_INITIATOR_SHIFT (4)
  51. #define HT_ADDBA_REQUESTED_MSK BIT(0)
  52. #define HT_ADDBA_DRV_READY_MSK BIT(1)
  53. #define HT_ADDBA_RECEIVED_MSK BIT(2)
  54. #define HT_AGG_STATE_REQ_STOP_BA_MSK BIT(3)
  55. #define HT_AGG_STATE_INITIATOR_MSK BIT(HT_AGG_STATE_INITIATOR_SHIFT)
  56. #define HT_AGG_STATE_IDLE (0x0)
  57. #define HT_AGG_STATE_OPERATIONAL (HT_ADDBA_REQUESTED_MSK | \
  58. HT_ADDBA_DRV_READY_MSK | \
  59. HT_ADDBA_RECEIVED_MSK)
  60. #define HT_AGG_STATE_DEBUGFS_CTL BIT(7)
  61. /**
  62. * struct tid_ampdu_tx - TID aggregation information (Tx).
  63. *
  64. * @state: TID's state in session state machine.
  65. * @dialog_token: dialog token for aggregation session
  66. * @ssn: Starting Sequence Number expected to be aggregated.
  67. * @addba_resp_timer: timer for peer's response to addba request
  68. * @addba_req_num: number of times addBA request has been sent.
  69. */
  70. struct tid_ampdu_tx {
  71. u8 state;
  72. u8 dialog_token;
  73. u16 ssn;
  74. struct timer_list addba_resp_timer;
  75. u8 addba_req_num;
  76. };
  77. /**
  78. * struct tid_ampdu_rx - TID aggregation information (Rx).
  79. *
  80. * @state: TID's state in session state machine.
  81. * @dialog_token: dialog token for aggregation session
  82. * @ssn: Starting Sequence Number expected to be aggregated.
  83. * @buf_size: buffer size for incoming A-MPDUs
  84. * @timeout: reset timer value.
  85. * @head_seq_num: head sequence number in reordering buffer.
  86. * @stored_mpdu_num: number of MPDUs in reordering buffer
  87. * @reorder_buf: buffer to reorder incoming aggregated MPDUs
  88. * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
  89. */
  90. struct tid_ampdu_rx {
  91. u8 state;
  92. u8 dialog_token;
  93. u16 ssn;
  94. u16 buf_size;
  95. u16 timeout;
  96. u16 head_seq_num;
  97. u16 stored_mpdu_num;
  98. struct sk_buff **reorder_buf;
  99. struct timer_list session_timer;
  100. };
  101. /**
  102. * enum plink_state - state of a mesh peer link finite state machine
  103. *
  104. * @PLINK_LISTEN: initial state, considered the implicit state of non existant
  105. * mesh peer links
  106. * @PLINK_OPN_SNT: mesh plink open frame has been sent to this mesh peer
  107. * @PLINK_OPN_RCVD: mesh plink open frame has been received from this mesh peer
  108. * @PLINK_CNF_RCVD: mesh plink confirm frame has been received from this mesh
  109. * peer
  110. * @PLINK_ESTAB: mesh peer link is established
  111. * @PLINK_HOLDING: mesh peer link is being closed or cancelled
  112. * @PLINK_BLOCKED: all frames transmitted from this mesh plink are discarded
  113. */
  114. enum plink_state {
  115. PLINK_LISTEN,
  116. PLINK_OPN_SNT,
  117. PLINK_OPN_RCVD,
  118. PLINK_CNF_RCVD,
  119. PLINK_ESTAB,
  120. PLINK_HOLDING,
  121. PLINK_BLOCKED
  122. };
  123. /**
  124. * struct sta_ampdu_mlme - STA aggregation information.
  125. *
  126. * @tid_rx: aggregation info for Rx per TID
  127. * @tid_tx: aggregation info for Tx per TID
  128. * @ampdu_rx: for locking sections in aggregation Rx flow
  129. * @ampdu_tx: for locking sectionsi in aggregation Tx flow
  130. * @dialog_token_allocator: dialog token enumerator for each new session;
  131. */
  132. struct sta_ampdu_mlme {
  133. struct tid_ampdu_rx tid_rx[STA_TID_NUM];
  134. struct tid_ampdu_tx tid_tx[STA_TID_NUM];
  135. spinlock_t ampdu_rx;
  136. spinlock_t ampdu_tx;
  137. u8 dialog_token_allocator;
  138. };
  139. /* see __sta_info_unlink */
  140. #define STA_INFO_PIN_STAT_NORMAL 0
  141. #define STA_INFO_PIN_STAT_PINNED 1
  142. #define STA_INFO_PIN_STAT_DESTROY 2
  143. /**
  144. * struct sta_info - STA information
  145. *
  146. * This structure collects information about a station that
  147. * mac80211 is communicating with.
  148. *
  149. * @list: global linked list entry
  150. * @hnext: hash table linked list pointer
  151. * @local: pointer to the global information
  152. * @addr: MAC address of this STA
  153. * @aid: STA's unique AID (1..2007, 0 = not assigned yet),
  154. * only used in AP (and IBSS?) mode
  155. * @flags: STA flags, see &enum ieee80211_sta_info_flags
  156. * @ps_tx_buf: buffer of frames to transmit to this station
  157. * when it leaves power saving state
  158. * @tx_filtered: buffer of frames we already tried to transmit
  159. * but were filtered by hardware due to STA having entered
  160. * power saving state
  161. * @rx_packets: Number of MSDUs received from this STA
  162. * @rx_bytes: Number of bytes received from this STA
  163. * @supp_rates: Bitmap of supported rates (per band)
  164. * @ht_info: HT capabilities of this STA
  165. */
  166. struct sta_info {
  167. /* General information, mostly static */
  168. struct list_head list;
  169. struct sta_info *hnext;
  170. struct ieee80211_local *local;
  171. struct ieee80211_sub_if_data *sdata;
  172. struct ieee80211_key *key;
  173. struct rate_control_ref *rate_ctrl;
  174. void *rate_ctrl_priv;
  175. struct ieee80211_ht_info ht_info;
  176. u64 supp_rates[IEEE80211_NUM_BANDS];
  177. u8 addr[ETH_ALEN];
  178. u16 aid;
  179. u16 listen_interval;
  180. /*
  181. * for use by the internal lifetime management,
  182. * see __sta_info_unlink
  183. */
  184. u8 pin_status;
  185. /* frequently updated information, needs locking? */
  186. u32 flags;
  187. /*
  188. * STA powersave frame queues, no more than the internal
  189. * locking required.
  190. */
  191. struct sk_buff_head ps_tx_buf;
  192. struct sk_buff_head tx_filtered;
  193. /* Updated from RX path only, no locking requirements */
  194. unsigned long rx_packets, rx_bytes;
  195. unsigned long wep_weak_iv_count;
  196. unsigned long last_rx;
  197. unsigned long num_duplicates; /* number of duplicate frames received
  198. * from this STA */
  199. unsigned long rx_fragments; /* number of received MPDUs */
  200. unsigned long rx_dropped; /* number of dropped MPDUs from this STA */
  201. int last_rssi; /* RSSI of last received frame from this STA */
  202. int last_signal; /* signal of last received frame from this STA */
  203. int last_noise; /* noise of last received frame from this STA */
  204. /* last received seq/frag number from this STA (per RX queue) */
  205. __le16 last_seq_ctrl[NUM_RX_DATA_QUEUES];
  206. #ifdef CONFIG_MAC80211_DEBUG_COUNTERS
  207. unsigned int wme_rx_queue[NUM_RX_DATA_QUEUES];
  208. #endif
  209. /* Updated from TX status path only, no locking requirements */
  210. unsigned long tx_filtered_count;
  211. unsigned long tx_retry_failed, tx_retry_count;
  212. /* TODO: update in generic code not rate control? */
  213. u32 tx_num_consecutive_failures;
  214. u32 tx_num_mpdu_ok;
  215. u32 tx_num_mpdu_fail;
  216. /* moving percentage of failed MSDUs */
  217. unsigned int fail_avg;
  218. /* Updated from TX path only, no locking requirements */
  219. unsigned long tx_packets; /* number of RX/TX MSDUs */
  220. unsigned long tx_bytes;
  221. unsigned long tx_fragments; /* number of transmitted MPDUs */
  222. int txrate_idx;
  223. int last_txrate_idx;
  224. #ifdef CONFIG_MAC80211_DEBUG_COUNTERS
  225. unsigned int wme_tx_queue[NUM_RX_DATA_QUEUES];
  226. #endif
  227. /* Debug counters, no locking doesn't matter */
  228. int channel_use;
  229. int channel_use_raw;
  230. /*
  231. * Aggregation information, comes with own locking.
  232. */
  233. struct sta_ampdu_mlme ampdu_mlme;
  234. u8 timer_to_tid[STA_TID_NUM]; /* identity mapping to ID timers */
  235. u8 tid_to_tx_q[STA_TID_NUM]; /* map tid to tx queue */
  236. #ifdef CONFIG_MAC80211_MESH
  237. /*
  238. * Mesh peer link attributes
  239. * TODO: move to a sub-structure that is referenced with pointer?
  240. */
  241. __le16 llid; /* Local link ID */
  242. __le16 plid; /* Peer link ID */
  243. __le16 reason; /* Cancel reason on PLINK_HOLDING state */
  244. u8 plink_retries; /* Retries in establishment */
  245. bool ignore_plink_timer;
  246. enum plink_state plink_state;
  247. u32 plink_timeout;
  248. struct timer_list plink_timer;
  249. spinlock_t plink_lock; /* For peer_state reads / updates and other
  250. updates in the structure. Ensures robust
  251. transitions for the peerlink FSM */
  252. #endif
  253. #ifdef CONFIG_MAC80211_DEBUGFS
  254. struct sta_info_debugfsdentries {
  255. struct dentry *dir;
  256. struct dentry *flags;
  257. struct dentry *num_ps_buf_frames;
  258. struct dentry *inactive_ms;
  259. struct dentry *last_seq_ctrl;
  260. #ifdef CONFIG_MAC80211_DEBUG_COUNTERS
  261. struct dentry *wme_rx_queue;
  262. struct dentry *wme_tx_queue;
  263. #endif
  264. struct dentry *agg_status;
  265. } debugfs;
  266. #endif
  267. };
  268. static inline enum plink_state sta_plink_state(struct sta_info *sta)
  269. {
  270. #ifdef CONFIG_MAC80211_MESH
  271. return sta->plink_state;
  272. #endif
  273. return PLINK_LISTEN;
  274. }
  275. /* Maximum number of concurrently registered stations */
  276. #define MAX_STA_COUNT 2007
  277. #define STA_HASH_SIZE 256
  278. #define STA_HASH(sta) (sta[5])
  279. /* Maximum number of frames to buffer per power saving station */
  280. #define STA_MAX_TX_BUFFER 128
  281. /* Minimum buffered frame expiry time. If STA uses listen interval that is
  282. * smaller than this value, the minimum value here is used instead. */
  283. #define STA_TX_BUFFER_EXPIRE (10 * HZ)
  284. /* How often station data is cleaned up (e.g., expiration of buffered frames)
  285. */
  286. #define STA_INFO_CLEANUP_INTERVAL (10 * HZ)
  287. /*
  288. * Get a STA info, must have be under RCU read lock.
  289. */
  290. struct sta_info *sta_info_get(struct ieee80211_local *local, u8 *addr);
  291. /*
  292. * Get STA info by index, BROKEN!
  293. */
  294. struct sta_info *sta_info_get_by_idx(struct ieee80211_local *local, int idx,
  295. struct net_device *dev);
  296. /*
  297. * Create a new STA info, caller owns returned structure
  298. * until sta_info_insert().
  299. */
  300. struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
  301. u8 *addr, gfp_t gfp);
  302. /*
  303. * Insert STA info into hash table/list, returns zero or a
  304. * -EEXIST if (if the same MAC address is already present).
  305. *
  306. * Calling this without RCU protection makes the caller
  307. * relinquish its reference to @sta.
  308. */
  309. int sta_info_insert(struct sta_info *sta);
  310. /*
  311. * Unlink a STA info from the hash table/list.
  312. * This can NULL the STA pointer if somebody else
  313. * has already unlinked it.
  314. */
  315. void sta_info_unlink(struct sta_info **sta);
  316. void sta_info_destroy(struct sta_info *sta);
  317. void sta_info_set_tim_bit(struct sta_info *sta);
  318. void sta_info_clear_tim_bit(struct sta_info *sta);
  319. void sta_info_init(struct ieee80211_local *local);
  320. int sta_info_start(struct ieee80211_local *local);
  321. void sta_info_stop(struct ieee80211_local *local);
  322. int sta_info_flush(struct ieee80211_local *local,
  323. struct ieee80211_sub_if_data *sdata);
  324. #endif /* STA_INFO_H */