setup.c 8.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338
  1. /*
  2. * Maple (970 eval board) setup code
  3. *
  4. * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
  5. * IBM Corp.
  6. *
  7. * This program is free software; you can redistribute it and/or
  8. * modify it under the terms of the GNU General Public License
  9. * as published by the Free Software Foundation; either version
  10. * 2 of the License, or (at your option) any later version.
  11. *
  12. */
  13. #undef DEBUG
  14. #include <linux/init.h>
  15. #include <linux/errno.h>
  16. #include <linux/sched.h>
  17. #include <linux/kernel.h>
  18. #include <linux/mm.h>
  19. #include <linux/stddef.h>
  20. #include <linux/unistd.h>
  21. #include <linux/ptrace.h>
  22. #include <linux/slab.h>
  23. #include <linux/user.h>
  24. #include <linux/a.out.h>
  25. #include <linux/tty.h>
  26. #include <linux/string.h>
  27. #include <linux/delay.h>
  28. #include <linux/ioport.h>
  29. #include <linux/major.h>
  30. #include <linux/initrd.h>
  31. #include <linux/vt_kern.h>
  32. #include <linux/console.h>
  33. #include <linux/ide.h>
  34. #include <linux/pci.h>
  35. #include <linux/adb.h>
  36. #include <linux/cuda.h>
  37. #include <linux/pmu.h>
  38. #include <linux/irq.h>
  39. #include <linux/seq_file.h>
  40. #include <linux/root_dev.h>
  41. #include <linux/serial.h>
  42. #include <linux/smp.h>
  43. #include <asm/processor.h>
  44. #include <asm/sections.h>
  45. #include <asm/prom.h>
  46. #include <asm/system.h>
  47. #include <asm/pgtable.h>
  48. #include <asm/bitops.h>
  49. #include <asm/io.h>
  50. #include <asm/kexec.h>
  51. #include <asm/pci-bridge.h>
  52. #include <asm/iommu.h>
  53. #include <asm/machdep.h>
  54. #include <asm/dma.h>
  55. #include <asm/cputable.h>
  56. #include <asm/time.h>
  57. #include <asm/of_device.h>
  58. #include <asm/lmb.h>
  59. #include <asm/mpic.h>
  60. #include <asm/udbg.h>
  61. #include "maple.h"
  62. #ifdef DEBUG
  63. #define DBG(fmt...) udbg_printf(fmt)
  64. #else
  65. #define DBG(fmt...)
  66. #endif
  67. static unsigned long maple_find_nvram_base(void)
  68. {
  69. struct device_node *rtcs;
  70. unsigned long result = 0;
  71. /* find NVRAM device */
  72. rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111");
  73. if (rtcs) {
  74. struct resource r;
  75. if (of_address_to_resource(rtcs, 0, &r)) {
  76. printk(KERN_EMERG "Maple: Unable to translate NVRAM"
  77. " address\n");
  78. goto bail;
  79. }
  80. if (!(r.flags & IORESOURCE_IO)) {
  81. printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n");
  82. goto bail;
  83. }
  84. result = r.start;
  85. } else
  86. printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
  87. bail:
  88. of_node_put(rtcs);
  89. return result;
  90. }
  91. static void maple_restart(char *cmd)
  92. {
  93. unsigned int maple_nvram_base;
  94. unsigned int maple_nvram_offset;
  95. unsigned int maple_nvram_command;
  96. struct device_node *sp;
  97. maple_nvram_base = maple_find_nvram_base();
  98. if (maple_nvram_base == 0)
  99. goto fail;
  100. /* find service processor device */
  101. sp = of_find_node_by_name(NULL, "service-processor");
  102. if (!sp) {
  103. printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
  104. goto fail;
  105. }
  106. maple_nvram_offset = *(unsigned int*) get_property(sp,
  107. "restart-addr", NULL);
  108. maple_nvram_command = *(unsigned int*) get_property(sp,
  109. "restart-value", NULL);
  110. of_node_put(sp);
  111. /* send command */
  112. outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
  113. for (;;) ;
  114. fail:
  115. printk(KERN_EMERG "Maple: Manual Restart Required\n");
  116. }
  117. static void maple_power_off(void)
  118. {
  119. unsigned int maple_nvram_base;
  120. unsigned int maple_nvram_offset;
  121. unsigned int maple_nvram_command;
  122. struct device_node *sp;
  123. maple_nvram_base = maple_find_nvram_base();
  124. if (maple_nvram_base == 0)
  125. goto fail;
  126. /* find service processor device */
  127. sp = of_find_node_by_name(NULL, "service-processor");
  128. if (!sp) {
  129. printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
  130. goto fail;
  131. }
  132. maple_nvram_offset = *(unsigned int*) get_property(sp,
  133. "power-off-addr", NULL);
  134. maple_nvram_command = *(unsigned int*) get_property(sp,
  135. "power-off-value", NULL);
  136. of_node_put(sp);
  137. /* send command */
  138. outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
  139. for (;;) ;
  140. fail:
  141. printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
  142. }
  143. static void maple_halt(void)
  144. {
  145. maple_power_off();
  146. }
  147. #ifdef CONFIG_SMP
  148. struct smp_ops_t maple_smp_ops = {
  149. .probe = smp_mpic_probe,
  150. .message_pass = smp_mpic_message_pass,
  151. .kick_cpu = smp_generic_kick_cpu,
  152. .setup_cpu = smp_mpic_setup_cpu,
  153. .give_timebase = smp_generic_give_timebase,
  154. .take_timebase = smp_generic_take_timebase,
  155. };
  156. #endif /* CONFIG_SMP */
  157. void __init maple_setup_arch(void)
  158. {
  159. /* init to some ~sane value until calibrate_delay() runs */
  160. loops_per_jiffy = 50000000;
  161. /* Setup SMP callback */
  162. #ifdef CONFIG_SMP
  163. smp_ops = &maple_smp_ops;
  164. #endif
  165. /* Lookup PCI hosts */
  166. maple_pci_init();
  167. #ifdef CONFIG_DUMMY_CONSOLE
  168. conswitchp = &dummy_con;
  169. #endif
  170. printk(KERN_DEBUG "Using native/NAP idle loop\n");
  171. }
  172. /*
  173. * Early initialization.
  174. */
  175. static void __init maple_init_early(void)
  176. {
  177. DBG(" -> maple_init_early\n");
  178. iommu_init_early_dart();
  179. DBG(" <- maple_init_early\n");
  180. }
  181. /*
  182. * This is almost identical to pSeries and CHRP. We need to make that
  183. * code generic at one point, with appropriate bits in the device-tree to
  184. * identify the presence of an HT APIC
  185. */
  186. static void __init maple_init_IRQ(void)
  187. {
  188. struct device_node *root, *np, *mpic_node = NULL;
  189. unsigned int *opprop;
  190. unsigned long openpic_addr = 0;
  191. int naddr, n, i, opplen, has_isus = 0;
  192. struct mpic *mpic;
  193. unsigned int flags = MPIC_PRIMARY;
  194. /* Locate MPIC in the device-tree. Note that there is a bug
  195. * in Maple device-tree where the type of the controller is
  196. * open-pic and not interrupt-controller
  197. */
  198. for_each_node_by_type(np, "interrupt-controller")
  199. if (device_is_compatible(np, "open-pic")) {
  200. mpic_node = np;
  201. break;
  202. }
  203. if (mpic_node == NULL)
  204. for_each_node_by_type(np, "open-pic") {
  205. mpic_node = np;
  206. break;
  207. }
  208. if (mpic_node == NULL) {
  209. printk(KERN_ERR
  210. "Failed to locate the MPIC interrupt controller\n");
  211. return;
  212. }
  213. /* Find address list in /platform-open-pic */
  214. root = of_find_node_by_path("/");
  215. naddr = prom_n_addr_cells(root);
  216. opprop = (unsigned int *) get_property(root, "platform-open-pic",
  217. &opplen);
  218. if (opprop != 0) {
  219. openpic_addr = of_read_number(opprop, naddr);
  220. has_isus = (opplen > naddr);
  221. printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
  222. openpic_addr, has_isus);
  223. }
  224. of_node_put(root);
  225. BUG_ON(openpic_addr == 0);
  226. /* Check for a big endian MPIC */
  227. if (get_property(np, "big-endian", NULL) != NULL)
  228. flags |= MPIC_BIG_ENDIAN;
  229. /* XXX Maple specific bits */
  230. flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET;
  231. /* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */
  232. flags |= MPIC_BIG_ENDIAN;
  233. /* Setup the openpic driver. More device-tree junks, we hard code no
  234. * ISUs for now. I'll have to revisit some stuffs with the folks doing
  235. * the firmware for those
  236. */
  237. mpic = mpic_alloc(mpic_node, openpic_addr, flags,
  238. /*has_isus ? 16 :*/ 0, 0, " MPIC ");
  239. BUG_ON(mpic == NULL);
  240. /* Add ISUs */
  241. opplen /= sizeof(u32);
  242. for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
  243. unsigned long isuaddr = of_read_number(opprop + i, naddr);
  244. mpic_assign_isu(mpic, n, isuaddr);
  245. }
  246. /* All ISUs are setup, complete initialization */
  247. mpic_init(mpic);
  248. ppc_md.get_irq = mpic_get_irq;
  249. of_node_put(mpic_node);
  250. of_node_put(root);
  251. }
  252. static void __init maple_progress(char *s, unsigned short hex)
  253. {
  254. printk("*** %04x : %s\n", hex, s ? s : "");
  255. }
  256. /*
  257. * Called very early, MMU is off, device-tree isn't unflattened
  258. */
  259. static int __init maple_probe(void)
  260. {
  261. unsigned long root = of_get_flat_dt_root();
  262. if (!of_flat_dt_is_compatible(root, "Momentum,Maple") &&
  263. !of_flat_dt_is_compatible(root, "Momentum,Apache"))
  264. return 0;
  265. /*
  266. * On U3, the DART (iommu) must be allocated now since it
  267. * has an impact on htab_initialize (due to the large page it
  268. * occupies having to be broken up so the DART itself is not
  269. * part of the cacheable linar mapping
  270. */
  271. alloc_dart_table();
  272. hpte_init_native();
  273. return 1;
  274. }
  275. define_machine(maple_md) {
  276. .name = "Maple",
  277. .probe = maple_probe,
  278. .setup_arch = maple_setup_arch,
  279. .init_early = maple_init_early,
  280. .init_IRQ = maple_init_IRQ,
  281. .pcibios_fixup = maple_pcibios_fixup,
  282. .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq,
  283. .restart = maple_restart,
  284. .power_off = maple_power_off,
  285. .halt = maple_halt,
  286. .get_boot_time = maple_get_boot_time,
  287. .set_rtc_time = maple_set_rtc_time,
  288. .get_rtc_time = maple_get_rtc_time,
  289. .calibrate_decr = generic_calibrate_decr,
  290. .progress = maple_progress,
  291. .power_save = power4_idle,
  292. #ifdef CONFIG_KEXEC
  293. .machine_kexec = default_machine_kexec,
  294. .machine_kexec_prepare = default_machine_kexec_prepare,
  295. .machine_crash_shutdown = default_machine_crash_shutdown,
  296. #endif
  297. };