sleep.c 4.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169
  1. /*
  2. * sleep.c - x86-specific ACPI sleep support.
  3. *
  4. * Copyright (C) 2001-2003 Patrick Mochel
  5. * Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz>
  6. */
  7. #include <linux/acpi.h>
  8. #include <linux/bootmem.h>
  9. #include <linux/dmi.h>
  10. #include <linux/cpumask.h>
  11. #include <asm/segment.h>
  12. #include <asm/desc.h>
  13. #include "realmode/wakeup.h"
  14. #include "sleep.h"
  15. unsigned long acpi_wakeup_address;
  16. unsigned long acpi_realmode_flags;
  17. /* address in low memory of the wakeup routine. */
  18. static unsigned long acpi_realmode;
  19. #if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
  20. static char temp_stack[4096];
  21. #endif
  22. /**
  23. * acpi_save_state_mem - save kernel state
  24. *
  25. * Create an identity mapped page table and copy the wakeup routine to
  26. * low memory.
  27. *
  28. * Note that this is too late to change acpi_wakeup_address.
  29. */
  30. int acpi_save_state_mem(void)
  31. {
  32. struct wakeup_header *header;
  33. if (!acpi_realmode) {
  34. printk(KERN_ERR "Could not allocate memory during boot, "
  35. "S3 disabled\n");
  36. return -ENOMEM;
  37. }
  38. memcpy((void *)acpi_realmode, &wakeup_code_start, WAKEUP_SIZE);
  39. header = (struct wakeup_header *)(acpi_realmode + HEADER_OFFSET);
  40. if (header->signature != 0x51ee1111) {
  41. printk(KERN_ERR "wakeup header does not match\n");
  42. return -EINVAL;
  43. }
  44. header->video_mode = saved_video_mode;
  45. header->wakeup_jmp_seg = acpi_wakeup_address >> 4;
  46. /*
  47. * Set up the wakeup GDT. We set these up as Big Real Mode,
  48. * that is, with limits set to 4 GB. At least the Lenovo
  49. * Thinkpad X61 is known to need this for the video BIOS
  50. * initialization quirk to work; this is likely to also
  51. * be the case for other laptops or integrated video devices.
  52. */
  53. /* GDT[0]: GDT self-pointer */
  54. header->wakeup_gdt[0] =
  55. (u64)(sizeof(header->wakeup_gdt) - 1) +
  56. ((u64)(acpi_wakeup_address +
  57. ((char *)&header->wakeup_gdt - (char *)acpi_realmode))
  58. << 16);
  59. /* GDT[1]: big real mode-like code segment */
  60. header->wakeup_gdt[1] =
  61. GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff);
  62. /* GDT[2]: big real mode-like data segment */
  63. header->wakeup_gdt[2] =
  64. GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff);
  65. #ifndef CONFIG_64BIT
  66. store_gdt((struct desc_ptr *)&header->pmode_gdt);
  67. header->pmode_efer_low = nx_enabled;
  68. if (header->pmode_efer_low & 1) {
  69. /* This is strange, why not save efer, always? */
  70. rdmsr(MSR_EFER, header->pmode_efer_low,
  71. header->pmode_efer_high);
  72. }
  73. #endif /* !CONFIG_64BIT */
  74. header->pmode_cr0 = read_cr0();
  75. header->pmode_cr4 = read_cr4_safe();
  76. header->realmode_flags = acpi_realmode_flags;
  77. header->real_magic = 0x12345678;
  78. #ifndef CONFIG_64BIT
  79. header->pmode_entry = (u32)&wakeup_pmode_return;
  80. header->pmode_cr3 = (u32)(swsusp_pg_dir - __PAGE_OFFSET);
  81. saved_magic = 0x12345678;
  82. #else /* CONFIG_64BIT */
  83. header->trampoline_segment = setup_trampoline() >> 4;
  84. #ifdef CONFIG_SMP
  85. stack_start.sp = temp_stack + sizeof(temp_stack);
  86. early_gdt_descr.address =
  87. (unsigned long)get_cpu_gdt_table(smp_processor_id());
  88. #endif
  89. initial_code = (unsigned long)wakeup_long64;
  90. saved_magic = 0x123456789abcdef0;
  91. #endif /* CONFIG_64BIT */
  92. return 0;
  93. }
  94. /*
  95. * acpi_restore_state - undo effects of acpi_save_state_mem
  96. */
  97. void acpi_restore_state_mem(void)
  98. {
  99. }
  100. /**
  101. * acpi_reserve_bootmem - do _very_ early ACPI initialisation
  102. *
  103. * We allocate a page from the first 1MB of memory for the wakeup
  104. * routine for when we come back from a sleep state. The
  105. * runtime allocator allows specification of <16MB pages, but not
  106. * <1MB pages.
  107. */
  108. void __init acpi_reserve_bootmem(void)
  109. {
  110. if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) {
  111. printk(KERN_ERR
  112. "ACPI: Wakeup code way too big, S3 disabled.\n");
  113. return;
  114. }
  115. acpi_realmode = (unsigned long)alloc_bootmem_low(WAKEUP_SIZE);
  116. if (!acpi_realmode) {
  117. printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
  118. return;
  119. }
  120. acpi_wakeup_address = virt_to_phys((void *)acpi_realmode);
  121. }
  122. static int __init acpi_sleep_setup(char *str)
  123. {
  124. while ((str != NULL) && (*str != '\0')) {
  125. if (strncmp(str, "s3_bios", 7) == 0)
  126. acpi_realmode_flags |= 1;
  127. if (strncmp(str, "s3_mode", 7) == 0)
  128. acpi_realmode_flags |= 2;
  129. if (strncmp(str, "s3_beep", 7) == 0)
  130. acpi_realmode_flags |= 4;
  131. #ifdef CONFIG_HIBERNATION
  132. if (strncmp(str, "s4_nohwsig", 10) == 0)
  133. acpi_no_s4_hw_signature();
  134. #endif
  135. if (strncmp(str, "old_ordering", 12) == 0)
  136. acpi_old_suspend_ordering();
  137. str = strchr(str, ',');
  138. if (str != NULL)
  139. str += strspn(str, ", \t");
  140. }
  141. return 1;
  142. }
  143. __setup("acpi_sleep=", acpi_sleep_setup);