| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291 |
- if ARCH_PXA
- menu "Intel PXA2xx/PXA3xx Implementations"
- if PXA3xx
- menu "Supported PXA3xx Processor Variants"
- config CPU_PXA300
- bool "PXA300 (codename Monahans-L)"
- config CPU_PXA310
- bool "PXA310 (codename Monahans-LV)"
- select CPU_PXA300
- config CPU_PXA320
- bool "PXA320 (codename Monahans-P)"
- endmenu
- endif
- menu "Select target boards"
- config ARCH_GUMSTIX
- bool "Gumstix XScale boards"
- help
- Say Y here if you intend to run this kernel on a
- Gumstix Full Function Minature Computer.
- config ARCH_LUBBOCK
- bool "Intel DBPXA250 Development Platform"
- select PXA25x
- select SA1111
- config MACH_LOGICPD_PXA270
- bool "LogicPD PXA270 Card Engine Development Platform"
- select PXA27x
- select HAVE_PWM
- config MACH_MAINSTONE
- bool "Intel HCDDBBVA0 Development Platform"
- select PXA27x
- select HAVE_PWM
- config ARCH_PXA_IDP
- bool "Accelent Xscale IDP"
- select PXA25x
- config PXA_SHARPSL
- bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
- select SHARP_SCOOP
- select SHARP_PARAM
- help
- Say Y here if you intend to run this kernel on a
- Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
- SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
- SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
- handheld computer.
- config ARCH_PXA_ESERIES
- bool "PXA based Toshiba e-series PDAs"
- select PXA25x
- config MACH_E330
- bool "Toshiba e330"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e330 family PDA.
- config MACH_E740
- bool "Toshiba e740"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e740 family PDA.
- config MACH_E750
- bool "Toshiba e750"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e750 family PDA.
- config MACH_E400
- bool "Toshiba e400"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e400 family PDA.
- config MACH_E800
- bool "Toshiba e800"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e800 family PDA.
- config MACH_TRIZEPS4
- bool "Keith und Koep Trizeps4 DIMM-Module"
- select PXA27x
- config MACH_EM_X270
- bool "CompuLab EM-x270 platform"
- select PXA27x
- config MACH_COLIBRI
- bool "Toradex Colibri PX27x"
- select PXA27x
- config MACH_ZYLONITE
- bool "PXA3xx Development Platform"
- select PXA3xx
- select HAVE_PWM
- config MACH_LITTLETON
- bool "PXA3xx Form Factor Platform (aka Littleton)"
- select PXA3xx
- select PXA_SSP
- config MACH_ARMCORE
- bool "CompuLab CM-X270 modules"
- select PXA27x
- select IWMMXT
- config MACH_MAGICIAN
- bool "Enable HTC Magician Support"
- depends on ARCH_PXA
- select PXA27x
- select IWMMXT
- config MACH_PCM027
- bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
- select PXA27x
- select IWMMXT
- endmenu
- choice
- prompt "Used baseboard"
- depends on MACH_PCM027
- config MACH_PCM990_BASEBOARD
- bool "PHYTEC PCM-990 development board"
- select HAVE_PWM
- endchoice
- choice
- prompt "display on pcm990"
- depends on MACH_PCM990_BASEBOARD
- config PCM990_DISPLAY_SHARP
- bool "sharp lq084v1dg21 stn display"
- config PCM990_DISPLAY_NEC
- bool "nec nl6448bc20_18d tft display"
- config PCM990_DISPLAY_NONE
- bool "no display"
- endchoice
- if ARCH_GUMSTIX
- choice
- prompt "Select target Gumstix board"
- config MACH_GUMSTIX_F
- bool "Basix, Connex, ws-200ax, ws-400ax systems"
- select PXA25x
- endchoice
- endif
- if MACH_TRIZEPS4
- choice
- prompt "Select base board for Trizeps 4 module"
- config MACH_TRIZEPS4_CONXS
- bool "ConXS Eval Board"
- config MACH_TRIZEPS4_ANY
- bool "another Board"
- endchoice
- endif
- endmenu
- config MACH_POODLE
- bool "Enable Sharp SL-5600 (Poodle) Support"
- depends on PXA_SHARPSL
- select PXA25x
- select SHARP_LOCOMO
- select PXA_SSP
- config MACH_CORGI
- bool "Enable Sharp SL-C700 (Corgi) Support"
- depends on PXA_SHARPSL
- select PXA25x
- select PXA_SHARP_C7xx
- config MACH_SHEPHERD
- bool "Enable Sharp SL-C750 (Shepherd) Support"
- depends on PXA_SHARPSL
- select PXA25x
- select PXA_SHARP_C7xx
- config MACH_HUSKY
- bool "Enable Sharp SL-C760 (Husky) Support"
- depends on PXA_SHARPSL
- select PXA25x
- select PXA_SHARP_C7xx
- config MACH_AKITA
- bool "Enable Sharp SL-1000 (Akita) Support"
- depends on PXA_SHARPSL
- select PXA27x
- select PXA_SHARP_Cxx00
- select MACH_SPITZ
- select I2C
- select I2C_PXA
- config MACH_SPITZ
- bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
- depends on PXA_SHARPSL
- select PXA27x
- select PXA_SHARP_Cxx00
- config MACH_BORZOI
- bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
- depends on PXA_SHARPSL
- select PXA27x
- select PXA_SHARP_Cxx00
- config MACH_TOSA
- bool "Enable Sharp SL-6000x (Tosa) Support"
- depends on PXA_SHARPSL
- select PXA25x
- config PXA25x
- bool
- help
- Select code specific to PXA21x/25x/26x variants
- config PXA27x
- bool
- help
- Select code specific to PXA27x variants
- config PXA3xx
- bool
- help
- Select code specific to PXA3xx variants
- config PXA_SHARP_C7xx
- bool
- select PXA_SSP
- select SHARPSL_PM
- help
- Enable support for all Sharp C7xx models
- config PXA_SHARP_Cxx00
- bool
- select PXA_SSP
- select SHARPSL_PM
- help
- Enable common support for Sharp Cxx00 models
- config PXA_SSP
- tristate
- help
- Enable support for PXA2xx SSP ports
- config PXA_PWM
- tristate
- default BACKLIGHT_PWM
- help
- Enable support for PXA2xx/PXA3xx PWM controllers
- endif
|
