board.h 2.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138
  1. /*
  2. * arch/arm/plat-omap/include/mach/board.h
  3. *
  4. * Information structures for board-specific data
  5. *
  6. * Copyright (C) 2004 Nokia Corporation
  7. * Written by Juha Yrjölä <juha.yrjola@nokia.com>
  8. */
  9. #ifndef _OMAP_BOARD_H
  10. #define _OMAP_BOARD_H
  11. #include <linux/types.h>
  12. #include <plat/gpio-switch.h>
  13. /*
  14. * OMAP35x EVM revision
  15. * Run time detection of EVM revision is done by reading Ethernet
  16. * PHY ID -
  17. * GEN_1 = 0x01150000
  18. * GEN_2 = 0x92200000
  19. */
  20. enum {
  21. OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */
  22. OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */
  23. };
  24. /* Different peripheral ids */
  25. #define OMAP_TAG_CLOCK 0x4f01
  26. #define OMAP_TAG_GPIO_SWITCH 0x4f06
  27. #define OMAP_TAG_STI_CONSOLE 0x4f09
  28. #define OMAP_TAG_CAMERA_SENSOR 0x4f0a
  29. #define OMAP_TAG_BOOT_REASON 0x4f80
  30. #define OMAP_TAG_FLASH_PART 0x4f81
  31. #define OMAP_TAG_VERSION_STR 0x4f82
  32. struct omap_clock_config {
  33. /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
  34. u8 system_clock_type;
  35. };
  36. struct omap_serial_console_config {
  37. u8 console_uart;
  38. u32 console_speed;
  39. };
  40. struct omap_sti_console_config {
  41. unsigned enable:1;
  42. u8 channel;
  43. };
  44. struct omap_camera_sensor_config {
  45. u16 reset_gpio;
  46. int (*power_on)(void * data);
  47. int (*power_off)(void * data);
  48. };
  49. struct omap_lcd_config {
  50. char panel_name[16];
  51. char ctrl_name[16];
  52. s16 nreset_gpio;
  53. u8 data_lines;
  54. };
  55. struct device;
  56. struct fb_info;
  57. struct omap_backlight_config {
  58. int default_intensity;
  59. int (*set_power)(struct device *dev, int state);
  60. };
  61. struct omap_fbmem_config {
  62. u32 start;
  63. u32 size;
  64. };
  65. struct omap_pwm_led_platform_data {
  66. const char *name;
  67. int intensity_timer;
  68. int blink_timer;
  69. void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
  70. };
  71. struct omap_uart_config {
  72. /* Bit field of UARTs present; bit 0 --> UART1 */
  73. unsigned int enabled_uarts;
  74. };
  75. struct omap_flash_part_config {
  76. char part_table[0];
  77. };
  78. struct omap_boot_reason_config {
  79. char reason_str[12];
  80. };
  81. struct omap_version_config {
  82. char component[12];
  83. char version[12];
  84. };
  85. struct omap_board_config_entry {
  86. u16 tag;
  87. u16 len;
  88. u8 data[0];
  89. };
  90. struct omap_board_config_kernel {
  91. u16 tag;
  92. const void *data;
  93. };
  94. extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
  95. #define omap_get_config(tag, type) \
  96. ((const type *) __omap_get_config((tag), sizeof(type), 0))
  97. #define omap_get_nr_config(tag, type, nr) \
  98. ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
  99. extern const void *__init omap_get_var_config(u16 tag, size_t *len);
  100. extern struct omap_board_config_kernel *omap_board_config;
  101. extern int omap_board_config_size;
  102. /* for TI reference platforms sharing the same debug card */
  103. extern int debug_card_init(u32 addr, unsigned gpio);
  104. /* OMAP3EVM revision */
  105. #if defined(CONFIG_MACH_OMAP3EVM)
  106. u8 get_omap3_evm_rev(void);
  107. #else
  108. #define get_omap3_evm_rev() (-EINVAL)
  109. #endif
  110. #endif