123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342 |
- /*
- * An I2C driver for the Philips PCF8563 RTC
- * Copyright 2005-06 Tower Technologies
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Maintainers: http://www.nslu2-linux.org/
- *
- * based on the other drivers in this same directory.
- *
- * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/i2c.h>
- #include <linux/bcd.h>
- #include <linux/rtc.h>
- #define DRV_VERSION "0.4.2"
- /* Addresses to scan: none
- * This chip cannot be reliably autodetected. An empty eeprom
- * located at 0x51 will pass the validation routine due to
- * the way the registers are implemented.
- */
- static unsigned short normal_i2c[] = { I2C_CLIENT_END };
- /* Module parameters */
- I2C_CLIENT_INSMOD;
- #define PCF8563_REG_ST1 0x00 /* status */
- #define PCF8563_REG_ST2 0x01
- #define PCF8563_REG_SC 0x02 /* datetime */
- #define PCF8563_REG_MN 0x03
- #define PCF8563_REG_HR 0x04
- #define PCF8563_REG_DM 0x05
- #define PCF8563_REG_DW 0x06
- #define PCF8563_REG_MO 0x07
- #define PCF8563_REG_YR 0x08
- #define PCF8563_REG_AMN 0x09 /* alarm */
- #define PCF8563_REG_AHR 0x0A
- #define PCF8563_REG_ADM 0x0B
- #define PCF8563_REG_ADW 0x0C
- #define PCF8563_REG_CLKO 0x0D /* clock out */
- #define PCF8563_REG_TMRC 0x0E /* timer control */
- #define PCF8563_REG_TMR 0x0F /* timer */
- #define PCF8563_SC_LV 0x80 /* low voltage */
- #define PCF8563_MO_C 0x80 /* century */
- static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind);
- static int pcf8563_detach(struct i2c_client *client);
- /*
- * In the routines that deal directly with the pcf8563 hardware, we use
- * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
- */
- static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm)
- {
- unsigned char buf[13] = { PCF8563_REG_ST1 };
- struct i2c_msg msgs[] = {
- { client->addr, 0, 1, buf }, /* setup read ptr */
- { client->addr, I2C_M_RD, 13, buf }, /* read status + date */
- };
- /* read registers */
- if ((i2c_transfer(client->adapter, msgs, 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
- return -EIO;
- }
- if (buf[PCF8563_REG_SC] & PCF8563_SC_LV)
- dev_info(&client->dev,
- "low voltage detected, date/time is not reliable.\n");
- dev_dbg(&client->dev,
- "%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, "
- "mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
- __FUNCTION__,
- buf[0], buf[1], buf[2], buf[3],
- buf[4], buf[5], buf[6], buf[7],
- buf[8]);
- tm->tm_sec = BCD2BIN(buf[PCF8563_REG_SC] & 0x7F);
- tm->tm_min = BCD2BIN(buf[PCF8563_REG_MN] & 0x7F);
- tm->tm_hour = BCD2BIN(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */
- tm->tm_mday = BCD2BIN(buf[PCF8563_REG_DM] & 0x3F);
- tm->tm_wday = buf[PCF8563_REG_DW] & 0x07;
- tm->tm_mon = BCD2BIN(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
- tm->tm_year = BCD2BIN(buf[PCF8563_REG_YR])
- + (buf[PCF8563_REG_MO] & PCF8563_MO_C ? 100 : 0);
- dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
- "mday=%d, mon=%d, year=%d, wday=%d\n",
- __FUNCTION__,
- tm->tm_sec, tm->tm_min, tm->tm_hour,
- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
- /* the clock can give out invalid datetime, but we cannot return
- * -EINVAL otherwise hwclock will refuse to set the time on bootup.
- */
- if (rtc_valid_tm(tm) < 0)
- dev_err(&client->dev, "retrieved date/time is not valid.\n");
- return 0;
- }
- static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm)
- {
- int i, err;
- unsigned char buf[9];
- dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
- "mday=%d, mon=%d, year=%d, wday=%d\n",
- __FUNCTION__,
- tm->tm_sec, tm->tm_min, tm->tm_hour,
- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
- /* hours, minutes and seconds */
- buf[PCF8563_REG_SC] = BIN2BCD(tm->tm_sec);
- buf[PCF8563_REG_MN] = BIN2BCD(tm->tm_min);
- buf[PCF8563_REG_HR] = BIN2BCD(tm->tm_hour);
- buf[PCF8563_REG_DM] = BIN2BCD(tm->tm_mday);
- /* month, 1 - 12 */
- buf[PCF8563_REG_MO] = BIN2BCD(tm->tm_mon + 1);
- /* year and century */
- buf[PCF8563_REG_YR] = BIN2BCD(tm->tm_year % 100);
- if (tm->tm_year / 100)
- buf[PCF8563_REG_MO] |= PCF8563_MO_C;
- buf[PCF8563_REG_DW] = tm->tm_wday & 0x07;
- /* write register's data */
- for (i = 0; i < 7; i++) {
- unsigned char data[2] = { PCF8563_REG_SC + i,
- buf[PCF8563_REG_SC + i] };
- err = i2c_master_send(client, data, sizeof(data));
- if (err != sizeof(data)) {
- dev_err(&client->dev,
- "%s: err=%d addr=%02x, data=%02x\n",
- __FUNCTION__, err, data[0], data[1]);
- return -EIO;
- }
- };
- return 0;
- }
- struct pcf8563_limit
- {
- unsigned char reg;
- unsigned char mask;
- unsigned char min;
- unsigned char max;
- };
- static int pcf8563_validate_client(struct i2c_client *client)
- {
- int i;
- static const struct pcf8563_limit pattern[] = {
- /* register, mask, min, max */
- { PCF8563_REG_SC, 0x7F, 0, 59 },
- { PCF8563_REG_MN, 0x7F, 0, 59 },
- { PCF8563_REG_HR, 0x3F, 0, 23 },
- { PCF8563_REG_DM, 0x3F, 0, 31 },
- { PCF8563_REG_MO, 0x1F, 0, 12 },
- };
- /* check limits (only registers with bcd values) */
- for (i = 0; i < ARRAY_SIZE(pattern); i++) {
- int xfer;
- unsigned char value;
- unsigned char buf = pattern[i].reg;
- struct i2c_msg msgs[] = {
- { client->addr, 0, 1, &buf },
- { client->addr, I2C_M_RD, 1, &buf },
- };
- xfer = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (xfer != ARRAY_SIZE(msgs)) {
- dev_err(&client->adapter->dev,
- "%s: could not read register 0x%02X\n",
- __FUNCTION__, pattern[i].reg);
- return -EIO;
- }
- value = BCD2BIN(buf & pattern[i].mask);
- if (value > pattern[i].max ||
- value < pattern[i].min) {
- dev_dbg(&client->adapter->dev,
- "%s: pattern=%d, reg=%x, mask=0x%02x, min=%d, "
- "max=%d, value=%d, raw=0x%02X\n",
- __FUNCTION__, i, pattern[i].reg, pattern[i].mask,
- pattern[i].min, pattern[i].max,
- value, buf);
- return -ENODEV;
- }
- }
- return 0;
- }
- static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
- {
- return pcf8563_get_datetime(to_i2c_client(dev), tm);
- }
- static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
- {
- return pcf8563_set_datetime(to_i2c_client(dev), tm);
- }
- static struct rtc_class_ops pcf8563_rtc_ops = {
- .read_time = pcf8563_rtc_read_time,
- .set_time = pcf8563_rtc_set_time,
- };
- static int pcf8563_attach(struct i2c_adapter *adapter)
- {
- return i2c_probe(adapter, &addr_data, pcf8563_probe);
- }
- static struct i2c_driver pcf8563_driver = {
- .driver = {
- .name = "pcf8563",
- },
- .id = I2C_DRIVERID_PCF8563,
- .attach_adapter = &pcf8563_attach,
- .detach_client = &pcf8563_detach,
- };
- static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind)
- {
- struct i2c_client *client;
- struct rtc_device *rtc;
- int err = 0;
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
- err = -ENODEV;
- goto exit;
- }
- if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
- client->addr = address;
- client->driver = &pcf8563_driver;
- client->adapter = adapter;
- strlcpy(client->name, pcf8563_driver.driver.name, I2C_NAME_SIZE);
- /* Verify the chip is really an PCF8563 */
- if (kind < 0) {
- if (pcf8563_validate_client(client) < 0) {
- err = -ENODEV;
- goto exit_kfree;
- }
- }
- /* Inform the i2c layer */
- if ((err = i2c_attach_client(client)))
- goto exit_kfree;
- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
- rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev,
- &pcf8563_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
- err = PTR_ERR(rtc);
- goto exit_detach;
- }
- i2c_set_clientdata(client, rtc);
- return 0;
- exit_detach:
- i2c_detach_client(client);
- exit_kfree:
- kfree(client);
- exit:
- return err;
- }
- static int pcf8563_detach(struct i2c_client *client)
- {
- int err;
- struct rtc_device *rtc = i2c_get_clientdata(client);
- if (rtc)
- rtc_device_unregister(rtc);
- if ((err = i2c_detach_client(client)))
- return err;
- kfree(client);
- return 0;
- }
- static int __init pcf8563_init(void)
- {
- return i2c_add_driver(&pcf8563_driver);
- }
- static void __exit pcf8563_exit(void)
- {
- i2c_del_driver(&pcf8563_driver);
- }
- MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
- MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver");
- MODULE_LICENSE("GPL");
- MODULE_VERSION(DRV_VERSION);
- module_init(pcf8563_init);
- module_exit(pcf8563_exit);
|