123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295 |
- /*
- * PCI Express Hot Plug Controller Driver
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
- *
- */
- #ifndef _PCIEHP_H
- #define _PCIEHP_H
- #include <linux/types.h>
- #include <linux/pci.h>
- #include <linux/delay.h>
- #include <linux/sched.h> /* signal_pending() */
- #include <linux/pcieport_if.h>
- #include <linux/mutex.h>
- #include "pci_hotplug.h"
- #define MY_NAME "pciehp"
- extern int pciehp_poll_mode;
- extern int pciehp_poll_time;
- extern int pciehp_debug;
- extern int pciehp_force;
- /*#define dbg(format, arg...) do { if (pciehp_debug) printk(KERN_DEBUG "%s: " format, MY_NAME , ## arg); } while (0)*/
- #define dbg(format, arg...) do { if (pciehp_debug) printk("%s: " format, MY_NAME , ## arg); } while (0)
- #define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
- #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
- #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
- struct slot {
- struct slot *next;
- u8 bus;
- u8 device;
- u32 number;
- u8 state;
- struct timer_list task_event;
- u8 hp_slot;
- struct controller *ctrl;
- struct hpc_ops *hpc_ops;
- struct hotplug_slot *hotplug_slot;
- struct list_head slot_list;
- };
- struct event_info {
- u32 event_type;
- u8 hp_slot;
- };
- typedef u8(*php_intr_callback_t) (u8 hp_slot, void *instance_id);
- struct php_ctlr_state_s {
- struct php_ctlr_state_s *pnext;
- struct pci_dev *pci_dev;
- unsigned int irq;
- unsigned long flags; /* spinlock's */
- u32 slot_device_offset;
- u32 num_slots;
- struct timer_list int_poll_timer; /* Added for poll event */
- php_intr_callback_t attention_button_callback;
- php_intr_callback_t switch_change_callback;
- php_intr_callback_t presence_change_callback;
- php_intr_callback_t power_fault_callback;
- void *callback_instance_id;
- struct ctrl_reg *creg; /* Ptr to controller register space */
- };
- #define MAX_EVENTS 10
- struct controller {
- struct controller *next;
- struct mutex crit_sect; /* critical section mutex */
- struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */
- int num_slots; /* Number of slots on ctlr */
- int slot_num_inc; /* 1 or -1 */
- struct pci_dev *pci_dev;
- struct pci_bus *pci_bus;
- struct event_info event_queue[MAX_EVENTS];
- struct slot *slot;
- struct hpc_ops *hpc_ops;
- wait_queue_head_t queue; /* sleep & wake process */
- u8 next_event;
- u8 bus;
- u8 device;
- u8 function;
- u8 slot_device_offset;
- u32 first_slot; /* First physical slot number */ /* PCIE only has 1 slot */
- u8 slot_bus; /* Bus where the slots handled by this controller sit */
- u8 ctrlcap;
- u16 vendor_id;
- u8 cap_base;
- };
- #define INT_BUTTON_IGNORE 0
- #define INT_PRESENCE_ON 1
- #define INT_PRESENCE_OFF 2
- #define INT_SWITCH_CLOSE 3
- #define INT_SWITCH_OPEN 4
- #define INT_POWER_FAULT 5
- #define INT_POWER_FAULT_CLEAR 6
- #define INT_BUTTON_PRESS 7
- #define INT_BUTTON_RELEASE 8
- #define INT_BUTTON_CANCEL 9
- #define STATIC_STATE 0
- #define BLINKINGON_STATE 1
- #define BLINKINGOFF_STATE 2
- #define POWERON_STATE 3
- #define POWEROFF_STATE 4
- #define PCI_TO_PCI_BRIDGE_CLASS 0x00060400
- /* Error messages */
- #define INTERLOCK_OPEN 0x00000002
- #define ADD_NOT_SUPPORTED 0x00000003
- #define CARD_FUNCTIONING 0x00000005
- #define ADAPTER_NOT_SAME 0x00000006
- #define NO_ADAPTER_PRESENT 0x00000009
- #define NOT_ENOUGH_RESOURCES 0x0000000B
- #define DEVICE_TYPE_NOT_SUPPORTED 0x0000000C
- #define WRONG_BUS_FREQUENCY 0x0000000D
- #define POWER_FAILURE 0x0000000E
- #define REMOVE_NOT_SUPPORTED 0x00000003
- #define DISABLE_CARD 1
- /* Field definitions in Slot Capabilities Register */
- #define ATTN_BUTTN_PRSN 0x00000001
- #define PWR_CTRL_PRSN 0x00000002
- #define MRL_SENS_PRSN 0x00000004
- #define ATTN_LED_PRSN 0x00000008
- #define PWR_LED_PRSN 0x00000010
- #define HP_SUPR_RM_SUP 0x00000020
- #define ATTN_BUTTN(cap) (cap & ATTN_BUTTN_PRSN)
- #define POWER_CTRL(cap) (cap & PWR_CTRL_PRSN)
- #define MRL_SENS(cap) (cap & MRL_SENS_PRSN)
- #define ATTN_LED(cap) (cap & ATTN_LED_PRSN)
- #define PWR_LED(cap) (cap & PWR_LED_PRSN)
- #define HP_SUPR_RM(cap) (cap & HP_SUPR_RM_SUP)
- /*
- * error Messages
- */
- #define msg_initialization_err "Initialization failure, error=%d\n"
- #define msg_button_on "PCI slot #%d - powering on due to button press.\n"
- #define msg_button_off "PCI slot #%d - powering off due to button press.\n"
- #define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n"
- #define msg_button_ignore "PCI slot #%d - button press ignored. (action in progress...)\n"
- /* controller functions */
- extern int pciehp_event_start_thread (void);
- extern void pciehp_event_stop_thread (void);
- extern int pciehp_enable_slot (struct slot *slot);
- extern int pciehp_disable_slot (struct slot *slot);
- extern u8 pciehp_handle_attention_button (u8 hp_slot, void *inst_id);
- extern u8 pciehp_handle_switch_change (u8 hp_slot, void *inst_id);
- extern u8 pciehp_handle_presence_change (u8 hp_slot, void *inst_id);
- extern u8 pciehp_handle_power_fault (u8 hp_slot, void *inst_id);
- /* extern void long_delay (int delay); */
- /* pci functions */
- extern int pciehp_configure_device (struct slot *p_slot);
- extern int pciehp_unconfigure_device (struct slot *p_slot);
- /* Global variables */
- extern struct controller *pciehp_ctrl_list;
- /* Inline functions */
- static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device)
- {
- struct slot *p_slot, *tmp_slot = NULL;
- p_slot = ctrl->slot;
- while (p_slot && (p_slot->device != device)) {
- tmp_slot = p_slot;
- p_slot = p_slot->next;
- }
- if (p_slot == NULL) {
- err("ERROR: pciehp_find_slot device=0x%x\n", device);
- p_slot = tmp_slot;
- }
- return p_slot;
- }
- static inline int wait_for_ctrl_irq(struct controller *ctrl)
- {
- int retval = 0;
- DECLARE_WAITQUEUE(wait, current);
- add_wait_queue(&ctrl->queue, &wait);
- if (!pciehp_poll_mode)
- /* Sleep for up to 1 second */
- msleep_interruptible(1000);
- else
- msleep_interruptible(2500);
-
- remove_wait_queue(&ctrl->queue, &wait);
- if (signal_pending(current))
- retval = -EINTR;
- return retval;
- }
- #define SLOT_NAME_SIZE 10
- static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot)
- {
- snprintf(buffer, buffer_size, "%04d_%04d", slot->bus, slot->number);
- }
- enum php_ctlr_type {
- PCI,
- ISA,
- ACPI
- };
- int pcie_init(struct controller *ctrl, struct pcie_device *dev);
- /* This has no meaning for PCI Express, as there is only 1 slot per port */
- int pcie_get_ctlr_slot_config(struct controller *ctrl,
- int *num_ctlr_slots,
- int *first_device_num,
- int *physical_slot_num,
- u8 *ctrlcap);
- struct hpc_ops {
- int (*power_on_slot) (struct slot *slot);
- int (*power_off_slot) (struct slot *slot);
- int (*get_power_status) (struct slot *slot, u8 *status);
- int (*get_attention_status) (struct slot *slot, u8 *status);
- int (*set_attention_status) (struct slot *slot, u8 status);
- int (*get_latch_status) (struct slot *slot, u8 *status);
- int (*get_adapter_status) (struct slot *slot, u8 *status);
- int (*get_max_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
- int (*get_cur_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
- int (*get_max_lnk_width) (struct slot *slot, enum pcie_link_width *value);
- int (*get_cur_lnk_width) (struct slot *slot, enum pcie_link_width *value);
-
- int (*query_power_fault) (struct slot *slot);
- void (*green_led_on) (struct slot *slot);
- void (*green_led_off) (struct slot *slot);
- void (*green_led_blink) (struct slot *slot);
- void (*release_ctlr) (struct controller *ctrl);
- int (*check_lnk_status) (struct controller *ctrl);
- };
- #ifdef CONFIG_ACPI
- #define pciehp_get_hp_hw_control_from_firmware(dev) \
- pciehp_acpi_get_hp_hw_control_from_firmware(dev)
- static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
- struct hotplug_params *hpp)
- {
- if (ACPI_FAILURE(acpi_get_hp_params_from_firmware(dev, hpp)))
- return -ENODEV;
- return 0;
- }
- #else
- #define pciehp_get_hp_hw_control_from_firmware(dev) 0
- #define pciehp_get_hp_params_from_firmware(dev, hpp) (-ENODEV)
- #endif /* CONFIG_ACPI */
- #endif /* _PCIEHP_H */
|