123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218 |
- /*
- * drivers/mtd/nand/edb7312.c
- *
- * Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
- *
- * Derived from drivers/mtd/nand/autcpu12.c
- * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- * $Id: edb7312.c,v 1.12 2005/11/07 11:14:30 gleixner Exp $
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Overview:
- * This is a device driver for the NAND flash device found on the
- * CLEP7312 board which utilizes the Toshiba TC58V64AFT part. This is
- * a 64Mibit (8MiB x 8 bits) NAND flash device.
- */
- #include <linux/slab.h>
- #include <linux/module.h>
- #include <linux/init.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/nand.h>
- #include <linux/mtd/partitions.h>
- #include <asm/io.h>
- #include <asm/arch/hardware.h> /* for CLPS7111_VIRT_BASE */
- #include <asm/sizes.h>
- #include <asm/hardware/clps7111.h>
- /*
- * MTD structure for EDB7312 board
- */
- static struct mtd_info *ep7312_mtd = NULL;
- /*
- * Values specific to the EDB7312 board (used with EP7312 processor)
- */
- #define EP7312_FIO_PBASE 0x10000000 /* Phys address of flash */
- #define EP7312_PXDR 0x0001 /*
- * IO offset to Port B data register
- * where the CLE, ALE and NCE pins
- * are wired to.
- */
- #define EP7312_PXDDR 0x0041 /*
- * IO offset to Port B data direction
- * register so we can control the IO
- * lines.
- */
- /*
- * Module stuff
- */
- static unsigned long ep7312_fio_pbase = EP7312_FIO_PBASE;
- static void __iomem * ep7312_pxdr = (void __iomem *) EP7312_PXDR;
- static void __iomem * ep7312_pxddr = (void __iomem *) EP7312_PXDDR;
- #ifdef CONFIG_MTD_PARTITIONS
- /*
- * Define static partitions for flash device
- */
- static struct mtd_partition partition_info[] = {
- { .name = "EP7312 Nand Flash",
- .offset = 0,
- .size = 8*1024*1024 }
- };
- #define NUM_PARTITIONS 1
- #endif
- /*
- * hardware specific access to control-lines
- */
- static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd)
- {
- switch(cmd) {
- case NAND_CTL_SETCLE:
- clps_writeb(clps_readb(ep7312_pxdr) | 0x10, ep7312_pxdr);
- break;
- case NAND_CTL_CLRCLE:
- clps_writeb(clps_readb(ep7312_pxdr) & ~0x10, ep7312_pxdr);
- break;
- case NAND_CTL_SETALE:
- clps_writeb(clps_readb(ep7312_pxdr) | 0x20, ep7312_pxdr);
- break;
- case NAND_CTL_CLRALE:
- clps_writeb(clps_readb(ep7312_pxdr) & ~0x20, ep7312_pxdr);
- break;
- case NAND_CTL_SETNCE:
- clps_writeb((clps_readb(ep7312_pxdr) | 0x80) & ~0x40, ep7312_pxdr);
- break;
- case NAND_CTL_CLRNCE:
- clps_writeb((clps_readb(ep7312_pxdr) | 0x80) | 0x40, ep7312_pxdr);
- break;
- }
- }
- /*
- * read device ready pin
- */
- static int ep7312_device_ready(struct mtd_info *mtd)
- {
- return 1;
- }
- #ifdef CONFIG_MTD_PARTITIONS
- const char *part_probes[] = { "cmdlinepart", NULL };
- #endif
- /*
- * Main initialization routine
- */
- static int __init ep7312_init (void)
- {
- struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
- void __iomem * ep7312_fio_base;
- /* Allocate memory for MTD device structure and private data */
- ep7312_mtd = kmalloc(sizeof(struct mtd_info) +
- sizeof(struct nand_chip),
- GFP_KERNEL);
- if (!ep7312_mtd) {
- printk("Unable to allocate EDB7312 NAND MTD device structure.\n");
- return -ENOMEM;
- }
- /* map physical adress */
- ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
- if(!ep7312_fio_base) {
- printk("ioremap EDB7312 NAND flash failed\n");
- kfree(ep7312_mtd);
- return -EIO;
- }
- /* Get pointer to private data */
- this = (struct nand_chip *) (&ep7312_mtd[1]);
- /* Initialize structures */
- memset((char *) ep7312_mtd, 0, sizeof(struct mtd_info));
- memset((char *) this, 0, sizeof(struct nand_chip));
- /* Link the private data with the MTD structure */
- ep7312_mtd->priv = this;
- /*
- * Set GPIO Port B control register so that the pins are configured
- * to be outputs for controlling the NAND flash.
- */
- clps_writeb(0xf0, ep7312_pxddr);
- /* insert callbacks */
- this->IO_ADDR_R = ep7312_fio_base;
- this->IO_ADDR_W = ep7312_fio_base;
- this->hwcontrol = ep7312_hwcontrol;
- this->dev_ready = ep7312_device_ready;
- /* 15 us command delay time */
- this->chip_delay = 15;
- /* Scan to find existence of the device */
- if (nand_scan (ep7312_mtd, 1)) {
- iounmap((void *)ep7312_fio_base);
- kfree (ep7312_mtd);
- return -ENXIO;
- }
- #ifdef CONFIG_MTD_PARTITIONS
- ep7312_mtd->name = "edb7312-nand";
- mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes,
- &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
- #endif
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
- /* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- add_mtd_partitions(ep7312_mtd, mtd_parts, mtd_parts_nb);
- /* Return happy */
- return 0;
- }
- module_init(ep7312_init);
- /*
- * Clean up routine
- */
- static void __exit ep7312_cleanup (void)
- {
- struct nand_chip *this = (struct nand_chip *) &ep7312_mtd[1];
- /* Release resources, unregister device */
- nand_release (ap7312_mtd);
- /* Free internal data buffer */
- kfree (this->data_buf);
- /* Free the MTD device structure */
- kfree (ep7312_mtd);
- }
- module_exit(ep7312_cleanup);
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
- MODULE_DESCRIPTION("MTD map driver for Cogent EDB7312 board");
|