123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549 |
- /*
- * Copyright (C) 1995 Linus Torvalds
- * Adapted from 'alpha' version by Gary Thomas
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- */
- /*
- * bootup setup stuff..
- */
- #include <linux/config.h>
- #include <linux/errno.h>
- #include <linux/sched.h>
- #include <linux/kernel.h>
- #include <linux/mm.h>
- #include <linux/stddef.h>
- #include <linux/unistd.h>
- #include <linux/ptrace.h>
- #include <linux/slab.h>
- #include <linux/user.h>
- #include <linux/a.out.h>
- #include <linux/tty.h>
- #include <linux/major.h>
- #include <linux/interrupt.h>
- #include <linux/reboot.h>
- #include <linux/init.h>
- #include <linux/pci.h>
- #include <linux/version.h>
- #include <linux/adb.h>
- #include <linux/module.h>
- #include <linux/delay.h>
- #include <linux/ide.h>
- #include <linux/console.h>
- #include <linux/seq_file.h>
- #include <linux/root_dev.h>
- #include <linux/initrd.h>
- #include <linux/module.h>
- #include <linux/timer.h>
- #include <asm/io.h>
- #include <asm/pgtable.h>
- #include <asm/prom.h>
- #include <asm/gg2.h>
- #include <asm/pci-bridge.h>
- #include <asm/dma.h>
- #include <asm/machdep.h>
- #include <asm/irq.h>
- #include <asm/hydra.h>
- #include <asm/sections.h>
- #include <asm/time.h>
- #include <asm/i8259.h>
- #include <asm/mpic.h>
- #include <asm/rtas.h>
- #include <asm/xmon.h>
- #include "chrp.h"
- void rtas_indicator_progress(char *, unsigned short);
- int _chrp_type;
- EXPORT_SYMBOL(_chrp_type);
- struct mpic *chrp_mpic;
- /* Used for doing CHRP event-scans */
- DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
- unsigned long event_scan_interval;
- /*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems. -- paulus
- */
- extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
- extern unsigned long loops_per_jiffy;
- #ifdef CONFIG_SMP
- extern struct smp_ops_t chrp_smp_ops;
- #endif
- static const char *gg2_memtypes[4] = {
- "FPM", "SDRAM", "EDO", "BEDO"
- };
- static const char *gg2_cachesizes[4] = {
- "256 KB", "512 KB", "1 MB", "Reserved"
- };
- static const char *gg2_cachetypes[4] = {
- "Asynchronous", "Reserved", "Flow-Through Synchronous",
- "Pipelined Synchronous"
- };
- static const char *gg2_cachemodes[4] = {
- "Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
- };
- void chrp_show_cpuinfo(struct seq_file *m)
- {
- int i, sdramen;
- unsigned int t;
- struct device_node *root;
- const char *model = "";
- root = find_path_device("/");
- if (root)
- model = get_property(root, "model", NULL);
- seq_printf(m, "machine\t\t: CHRP %s\n", model);
- /* longtrail (goldengate) stuff */
- if (!strncmp(model, "IBM,LongTrail", 13)) {
- /* VLSI VAS96011/12 `Golden Gate 2' */
- /* Memory banks */
- sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
- >>31) & 1;
- for (i = 0; i < (sdramen ? 4 : 6); i++) {
- t = in_le32(gg2_pci_config_base+
- GG2_PCI_DRAM_BANK0+
- i*4);
- if (!(t & 1))
- continue;
- switch ((t>>8) & 0x1f) {
- case 0x1f:
- model = "4 MB";
- break;
- case 0x1e:
- model = "8 MB";
- break;
- case 0x1c:
- model = "16 MB";
- break;
- case 0x18:
- model = "32 MB";
- break;
- case 0x10:
- model = "64 MB";
- break;
- case 0x00:
- model = "128 MB";
- break;
- default:
- model = "Reserved";
- break;
- }
- seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
- gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
- }
- /* L2 cache */
- t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL);
- seq_printf(m, "board l2\t: %s %s (%s)\n",
- gg2_cachesizes[(t>>7) & 3],
- gg2_cachetypes[(t>>2) & 3],
- gg2_cachemodes[t & 3]);
- }
- }
- /*
- * Fixes for the National Semiconductor PC78308VUL SuperI/O
- *
- * Some versions of Open Firmware incorrectly initialize the IRQ settings
- * for keyboard and mouse
- */
- static inline void __init sio_write(u8 val, u8 index)
- {
- outb(index, 0x15c);
- outb(val, 0x15d);
- }
- static inline u8 __init sio_read(u8 index)
- {
- outb(index, 0x15c);
- return inb(0x15d);
- }
- static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
- u8 type)
- {
- u8 level0, type0, active;
- /* select logical device */
- sio_write(device, 0x07);
- active = sio_read(0x30);
- level0 = sio_read(0x70);
- type0 = sio_read(0x71);
- if (level0 != level || type0 != type || !active) {
- printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
- "remapping to level %d, type %d, active\n",
- name, level0, type0, !active ? "in" : "", level, type);
- sio_write(0x01, 0x30);
- sio_write(level, 0x70);
- sio_write(type, 0x71);
- }
- }
- static void __init sio_init(void)
- {
- struct device_node *root;
- if ((root = find_path_device("/")) &&
- !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) {
- /* logical device 0 (KBC/Keyboard) */
- sio_fixup_irq("keyboard", 0, 1, 2);
- /* select logical device 1 (KBC/Mouse) */
- sio_fixup_irq("mouse", 1, 12, 2);
- }
- }
- static void __init pegasos_set_l2cr(void)
- {
- struct device_node *np;
- /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
- if (_chrp_type != _CHRP_Pegasos)
- return;
- /* Enable L2 cache if needed */
- np = find_type_devices("cpu");
- if (np != NULL) {
- unsigned int *l2cr = (unsigned int *)
- get_property (np, "l2cr", NULL);
- if (l2cr == NULL) {
- printk ("Pegasos l2cr : no cpu l2cr property found\n");
- return;
- }
- if (!((*l2cr) & 0x80000000)) {
- printk ("Pegasos l2cr : L2 cache was not active, "
- "activating\n");
- _set_L2CR(0);
- _set_L2CR((*l2cr) | 0x80000000);
- }
- }
- }
- void __init chrp_setup_arch(void)
- {
- struct device_node *root = find_path_device ("/");
- char *machine = NULL;
- /* init to some ~sane value until calibrate_delay() runs */
- loops_per_jiffy = 50000000/HZ;
- if (root)
- machine = get_property(root, "model", NULL);
- if (machine && strncmp(machine, "Pegasos", 7) == 0) {
- _chrp_type = _CHRP_Pegasos;
- } else if (machine && strncmp(machine, "IBM", 3) == 0) {
- _chrp_type = _CHRP_IBM;
- } else if (machine && strncmp(machine, "MOT", 3) == 0) {
- _chrp_type = _CHRP_Motorola;
- } else {
- /* Let's assume it is an IBM chrp if all else fails */
- _chrp_type = _CHRP_IBM;
- }
- printk("chrp type = %x\n", _chrp_type);
- rtas_initialize();
- if (rtas_token("display-character") >= 0)
- ppc_md.progress = rtas_progress;
- /* use RTAS time-of-day routines if available */
- if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
- ppc_md.get_boot_time = rtas_get_boot_time;
- ppc_md.get_rtc_time = rtas_get_rtc_time;
- ppc_md.set_rtc_time = rtas_set_rtc_time;
- }
- #ifdef CONFIG_BLK_DEV_INITRD
- /* this is fine for chrp */
- initrd_below_start_ok = 1;
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
- #endif
- ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
- /* On pegasos, enable the L2 cache if not already done by OF */
- pegasos_set_l2cr();
- /* Lookup PCI host bridges */
- chrp_find_bridges();
- /*
- * Temporary fixes for PCI devices.
- * -- Geert
- */
- hydra_init(); /* Mac I/O */
- /*
- * Fix the Super I/O configuration
- */
- sio_init();
- pci_create_OF_bus_map();
- #ifdef CONFIG_SMP
- smp_ops = &chrp_smp_ops;
- #endif /* CONFIG_SMP */
- /*
- * Print the banner, then scroll down so boot progress
- * can be printed. -- Cort
- */
- if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
- }
- void
- chrp_event_scan(unsigned long unused)
- {
- unsigned char log[1024];
- int ret = 0;
- /* XXX: we should loop until the hardware says no more error logs -- Cort */
- rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0,
- __pa(log), 1024);
- mod_timer(&__get_cpu_var(heartbeat_timer),
- jiffies + event_scan_interval);
- }
- /*
- * Finds the open-pic node and sets up the mpic driver.
- */
- static void __init chrp_find_openpic(void)
- {
- struct device_node *np, *root;
- int len, i, j, irq_count;
- int isu_size, idu_size;
- unsigned int *iranges, *opprop = NULL;
- int oplen = 0;
- unsigned long opaddr;
- int na = 1;
- unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
- np = find_type_devices("open-pic");
- if (np == NULL)
- return;
- root = find_path_device("/");
- if (root) {
- opprop = (unsigned int *) get_property
- (root, "platform-open-pic", &oplen);
- na = prom_n_addr_cells(root);
- }
- if (opprop && oplen >= na * sizeof(unsigned int)) {
- opaddr = opprop[na-1]; /* assume 32-bit */
- oplen /= na * sizeof(unsigned int);
- } else {
- struct resource r;
- if (of_address_to_resource(np, 0, &r))
- return;
- opaddr = r.start;
- oplen = 0;
- }
- printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
- irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
- prom_get_irq_senses(init_senses, NUM_ISA_INTERRUPTS, NR_IRQS - 4);
- /* i8259 cascade is always positive level */
- init_senses[0] = IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE;
- iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
- if (iranges == NULL)
- len = 0; /* non-distributed mpic */
- else
- len /= 2 * sizeof(unsigned int);
- /*
- * The first pair of cells in interrupt-ranges refers to the
- * IDU; subsequent pairs refer to the ISUs.
- */
- if (oplen < len) {
- printk(KERN_ERR "Insufficient addresses for distributed"
- " OpenPIC (%d < %d)\n", oplen, len);
- len = oplen;
- }
- isu_size = 0;
- idu_size = 0;
- if (len > 0 && iranges[1] != 0) {
- printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
- iranges[0], iranges[0] + iranges[1] - 1);
- idu_size = iranges[1];
- }
- if (len > 1)
- isu_size = iranges[3];
- chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY,
- isu_size, NUM_ISA_INTERRUPTS, irq_count,
- NR_IRQS - 4, init_senses, irq_count,
- " MPIC ");
- if (chrp_mpic == NULL) {
- printk(KERN_ERR "Failed to allocate MPIC structure\n");
- return;
- }
- j = na - 1;
- for (i = 1; i < len; ++i) {
- iranges += 2;
- j += na;
- printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n",
- iranges[0], iranges[0] + iranges[1] - 1,
- opprop[j]);
- mpic_assign_isu(chrp_mpic, i - 1, opprop[j]);
- }
- mpic_init(chrp_mpic);
- mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
- }
- #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
- static struct irqaction xmon_irqaction = {
- .handler = xmon_irq,
- .mask = CPU_MASK_NONE,
- .name = "XMON break",
- };
- #endif
- void __init chrp_init_IRQ(void)
- {
- struct device_node *np;
- unsigned long chrp_int_ack = 0;
- #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
- struct device_node *kbd;
- #endif
- for (np = find_devices("pci"); np != NULL; np = np->next) {
- unsigned int *addrp = (unsigned int *)
- get_property(np, "8259-interrupt-acknowledge", NULL);
- if (addrp == NULL)
- continue;
- chrp_int_ack = addrp[prom_n_addr_cells(np)-1];
- break;
- }
- if (np == NULL)
- printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
- chrp_find_openpic();
- i8259_init(chrp_int_ack, 0);
- if (_chrp_type == _CHRP_Pegasos)
- ppc_md.get_irq = i8259_irq;
- #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
- /* see if there is a keyboard in the device tree
- with a parent of type "adb" */
- for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next)
- if (kbd->parent && kbd->parent->type
- && strcmp(kbd->parent->type, "adb") == 0)
- break;
- if (kbd)
- setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
- #endif
- }
- void __init
- chrp_init2(void)
- {
- struct device_node *device;
- unsigned int *p = NULL;
- #ifdef CONFIG_NVRAM
- chrp_nvram_init();
- #endif
- request_region(0x20,0x20,"pic1");
- request_region(0xa0,0x20,"pic2");
- request_region(0x00,0x20,"dma1");
- request_region(0x40,0x20,"timer");
- request_region(0x80,0x10,"dma page reg");
- request_region(0xc0,0x20,"dma2");
- /* Get the event scan rate for the rtas so we know how
- * often it expects a heartbeat. -- Cort
- */
- device = find_devices("rtas");
- if (device)
- p = (unsigned int *) get_property
- (device, "rtas-event-scan-rate", NULL);
- if (p && *p) {
- /*
- * Arrange to call chrp_event_scan at least *p times
- * per minute. We use 59 rather than 60 here so that
- * the rate will be slightly higher than the minimum.
- * This all assumes we don't do hotplug CPU on any
- * machine that needs the event scans done.
- */
- unsigned long interval, offset;
- int cpu, ncpus;
- struct timer_list *timer;
- interval = HZ * 59 / *p;
- offset = HZ;
- ncpus = num_online_cpus();
- event_scan_interval = ncpus * interval;
- for (cpu = 0; cpu < ncpus; ++cpu) {
- timer = &per_cpu(heartbeat_timer, cpu);
- setup_timer(timer, chrp_event_scan, 0);
- timer->expires = jiffies + offset;
- add_timer_on(timer, cpu);
- offset += interval;
- }
- printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
- *p, interval);
- }
- if (ppc_md.progress)
- ppc_md.progress(" Have fun! ", 0x7777);
- }
- static int __init chrp_probe(void)
- {
- char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
- "device_type", NULL);
- if (dtype == NULL)
- return 0;
- if (strcmp(dtype, "chrp"))
- return 0;
- ISA_DMA_THRESHOLD = ~0L;
- DMA_MODE_READ = 0x44;
- DMA_MODE_WRITE = 0x48;
- isa_io_base = CHRP_ISA_IO_BASE; /* default value */
- ppc_do_canonicalize_irqs = 1;
- /* Assume we have an 8259... */
- __irq_offset_value = NUM_ISA_INTERRUPTS;
- return 1;
- }
- define_machine(chrp) {
- .name = "CHRP",
- .probe = chrp_probe,
- .setup_arch = chrp_setup_arch,
- .init = chrp_init2,
- .show_cpuinfo = chrp_show_cpuinfo,
- .init_IRQ = chrp_init_IRQ,
- .get_irq = mpic_get_irq,
- .pcibios_fixup = chrp_pcibios_fixup,
- .restart = rtas_restart,
- .power_off = rtas_power_off,
- .halt = rtas_halt,
- .time_init = chrp_time_init,
- .set_rtc_time = chrp_set_rtc_time,
- .get_rtc_time = chrp_get_rtc_time,
- .calibrate_decr = generic_calibrate_decr,
- .phys_mem_access_prot = pci_phys_mem_access_prot,
- };
|