collie.c 9.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391
  1. /*
  2. * linux/arch/arm/mach-sa1100/collie.c
  3. *
  4. * May be copied or modified under the terms of the GNU General Public
  5. * License. See linux/COPYING for more information.
  6. *
  7. * This file contains all Collie-specific tweaks.
  8. *
  9. * This program is free software; you can redistribute it and/or modify
  10. * it under the terms of the GNU General Public License version 2 as
  11. * published by the Free Software Foundation.
  12. *
  13. * ChangeLog:
  14. * 2006 Pavel Machek <pavel@ucw.cz>
  15. * 03-06-2004 John Lenz <lenz@cs.wisc.edu>
  16. * 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
  17. * 04-16-2001 Lineo Japan,Inc. ...
  18. */
  19. #include <linux/init.h>
  20. #include <linux/kernel.h>
  21. #include <linux/tty.h>
  22. #include <linux/delay.h>
  23. #include <linux/platform_device.h>
  24. #include <linux/mtd/mtd.h>
  25. #include <linux/mtd/partitions.h>
  26. #include <linux/timer.h>
  27. #include <linux/gpio.h>
  28. #include <linux/pda_power.h>
  29. #include <video/sa1100fb.h>
  30. #include <mach/hardware.h>
  31. #include <asm/mach-types.h>
  32. #include <asm/irq.h>
  33. #include <asm/page.h>
  34. #include <asm/setup.h>
  35. #include <mach/collie.h>
  36. #include <asm/mach/arch.h>
  37. #include <asm/mach/flash.h>
  38. #include <asm/mach/map.h>
  39. #include <asm/mach/serial_sa1100.h>
  40. #include <asm/hardware/scoop.h>
  41. #include <asm/mach/sharpsl_param.h>
  42. #include <asm/hardware/locomo.h>
  43. #include <mach/mcp.h>
  44. #include "generic.h"
  45. static struct resource collie_scoop_resources[] = {
  46. [0] = DEFINE_RES_MEM(0x40800000, SZ_4K),
  47. };
  48. static struct scoop_config collie_scoop_setup = {
  49. .io_dir = COLLIE_SCOOP_IO_DIR,
  50. .io_out = COLLIE_SCOOP_IO_OUT,
  51. .gpio_base = COLLIE_SCOOP_GPIO_BASE,
  52. };
  53. struct platform_device colliescoop_device = {
  54. .name = "sharp-scoop",
  55. .id = -1,
  56. .dev = {
  57. .platform_data = &collie_scoop_setup,
  58. },
  59. .num_resources = ARRAY_SIZE(collie_scoop_resources),
  60. .resource = collie_scoop_resources,
  61. };
  62. static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
  63. {
  64. .dev = &colliescoop_device.dev,
  65. .irq = COLLIE_IRQ_GPIO_CF_IRQ,
  66. .cd_irq = COLLIE_IRQ_GPIO_CF_CD,
  67. .cd_irq_str = "PCMCIA0 CD",
  68. },
  69. };
  70. static struct scoop_pcmcia_config collie_pcmcia_config = {
  71. .devs = &collie_pcmcia_scoop[0],
  72. .num_devs = 1,
  73. };
  74. static struct mcp_plat_data collie_mcp_data = {
  75. .mccr0 = MCCR0_ADM | MCCR0_ExtClk,
  76. .sclk_rate = 9216000,
  77. .gpio_base = COLLIE_TC35143_GPIO_BASE,
  78. };
  79. /*
  80. * Collie AC IN
  81. */
  82. static int collie_power_init(struct device *dev)
  83. {
  84. int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
  85. if (ret)
  86. goto err_gpio_req;
  87. ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
  88. if (ret)
  89. goto err_gpio_in;
  90. return 0;
  91. err_gpio_in:
  92. gpio_free(COLLIE_GPIO_AC_IN);
  93. err_gpio_req:
  94. return ret;
  95. }
  96. static void collie_power_exit(struct device *dev)
  97. {
  98. gpio_free(COLLIE_GPIO_AC_IN);
  99. }
  100. static int collie_power_ac_online(void)
  101. {
  102. return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
  103. }
  104. static char *collie_ac_supplied_to[] = {
  105. "main-battery",
  106. "backup-battery",
  107. };
  108. static struct pda_power_pdata collie_power_data = {
  109. .init = collie_power_init,
  110. .is_ac_online = collie_power_ac_online,
  111. .exit = collie_power_exit,
  112. .supplied_to = collie_ac_supplied_to,
  113. .num_supplicants = ARRAY_SIZE(collie_ac_supplied_to),
  114. };
  115. static struct resource collie_power_resource[] = {
  116. {
  117. .name = "ac",
  118. .flags = IORESOURCE_IRQ |
  119. IORESOURCE_IRQ_HIGHEDGE |
  120. IORESOURCE_IRQ_LOWEDGE,
  121. },
  122. };
  123. static struct platform_device collie_power_device = {
  124. .name = "pda-power",
  125. .id = -1,
  126. .dev.platform_data = &collie_power_data,
  127. .resource = collie_power_resource,
  128. .num_resources = ARRAY_SIZE(collie_power_resource),
  129. };
  130. #ifdef CONFIG_SHARP_LOCOMO
  131. /*
  132. * low-level UART features.
  133. */
  134. struct platform_device collie_locomo_device;
  135. static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
  136. {
  137. if (mctrl & TIOCM_RTS)
  138. locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
  139. else
  140. locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
  141. if (mctrl & TIOCM_DTR)
  142. locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
  143. else
  144. locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
  145. }
  146. static u_int collie_uart_get_mctrl(struct uart_port *port)
  147. {
  148. int ret = TIOCM_CD;
  149. unsigned int r;
  150. r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
  151. if (r == -ENODEV)
  152. return ret;
  153. if (r & LOCOMO_GPIO_CTS)
  154. ret |= TIOCM_CTS;
  155. if (r & LOCOMO_GPIO_DSR)
  156. ret |= TIOCM_DSR;
  157. return ret;
  158. }
  159. static struct sa1100_port_fns collie_port_fns __initdata = {
  160. .set_mctrl = collie_uart_set_mctrl,
  161. .get_mctrl = collie_uart_get_mctrl,
  162. };
  163. static int collie_uart_probe(struct locomo_dev *dev)
  164. {
  165. return 0;
  166. }
  167. static int collie_uart_remove(struct locomo_dev *dev)
  168. {
  169. return 0;
  170. }
  171. static struct locomo_driver collie_uart_driver = {
  172. .drv = {
  173. .name = "collie_uart",
  174. },
  175. .devid = LOCOMO_DEVID_UART,
  176. .probe = collie_uart_probe,
  177. .remove = collie_uart_remove,
  178. };
  179. static int __init collie_uart_init(void)
  180. {
  181. return locomo_driver_register(&collie_uart_driver);
  182. }
  183. device_initcall(collie_uart_init);
  184. #endif
  185. static struct resource locomo_resources[] = {
  186. [0] = DEFINE_RES_MEM(0x40000000, SZ_8K),
  187. [1] = DEFINE_RES_IRQ(IRQ_GPIO25),
  188. };
  189. static struct locomo_platform_data locomo_info = {
  190. .irq_base = IRQ_BOARD_START,
  191. };
  192. struct platform_device collie_locomo_device = {
  193. .name = "locomo",
  194. .id = 0,
  195. .dev = {
  196. .platform_data = &locomo_info,
  197. },
  198. .num_resources = ARRAY_SIZE(locomo_resources),
  199. .resource = locomo_resources,
  200. };
  201. static struct platform_device *devices[] __initdata = {
  202. &collie_locomo_device,
  203. &colliescoop_device,
  204. &collie_power_device,
  205. };
  206. static struct mtd_partition collie_partitions[] = {
  207. {
  208. .name = "bootloader",
  209. .offset = 0,
  210. .size = 0x000C0000,
  211. .mask_flags = MTD_WRITEABLE
  212. }, {
  213. .name = "kernel",
  214. .offset = MTDPART_OFS_APPEND,
  215. .size = 0x00100000,
  216. }, {
  217. .name = "rootfs",
  218. .offset = MTDPART_OFS_APPEND,
  219. .size = 0x00e20000,
  220. }
  221. };
  222. static int collie_flash_init(void)
  223. {
  224. int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
  225. if (rc)
  226. return rc;
  227. rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1);
  228. if (rc)
  229. gpio_free(COLLIE_GPIO_VPEN);
  230. return rc;
  231. }
  232. static void collie_set_vpp(int vpp)
  233. {
  234. gpio_set_value(COLLIE_GPIO_VPEN, vpp);
  235. }
  236. static void collie_flash_exit(void)
  237. {
  238. gpio_free(COLLIE_GPIO_VPEN);
  239. }
  240. static struct flash_platform_data collie_flash_data = {
  241. .map_name = "cfi_probe",
  242. .init = collie_flash_init,
  243. .set_vpp = collie_set_vpp,
  244. .exit = collie_flash_exit,
  245. .parts = collie_partitions,
  246. .nr_parts = ARRAY_SIZE(collie_partitions),
  247. };
  248. static struct resource collie_flash_resources[] = {
  249. DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
  250. };
  251. static struct sa1100fb_mach_info collie_lcd_info = {
  252. .pixclock = 171521, .bpp = 16,
  253. .xres = 320, .yres = 240,
  254. .hsync_len = 5, .vsync_len = 1,
  255. .left_margin = 11, .upper_margin = 2,
  256. .right_margin = 30, .lower_margin = 0,
  257. .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
  258. .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
  259. .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
  260. };
  261. static void __init collie_init(void)
  262. {
  263. int ret = 0;
  264. /* cpu initialize */
  265. GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
  266. GPIO_MCP_CLK | GPIO_32_768kHz;
  267. GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
  268. GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
  269. GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
  270. _COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
  271. _COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
  272. PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
  273. PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
  274. PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
  275. PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY |
  276. _COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
  277. PGSR = _COLLIE_GPIO_nREMOCON_ON;
  278. PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
  279. PCFR = PCFR_OPDE;
  280. GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
  281. collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN);
  282. collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN);
  283. platform_scoop_config = &collie_pcmcia_config;
  284. ret = platform_add_devices(devices, ARRAY_SIZE(devices));
  285. if (ret) {
  286. printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
  287. }
  288. sa11x0_register_lcd(&collie_lcd_info);
  289. sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
  290. ARRAY_SIZE(collie_flash_resources));
  291. sa11x0_register_mcp(&collie_mcp_data);
  292. sharpsl_save_param();
  293. }
  294. static struct map_desc collie_io_desc[] __initdata = {
  295. { /* 32M main flash (cs0) */
  296. .virtual = 0xe8000000,
  297. .pfn = __phys_to_pfn(0x00000000),
  298. .length = 0x02000000,
  299. .type = MT_DEVICE
  300. }, { /* 32M boot flash (cs1) */
  301. .virtual = 0xea000000,
  302. .pfn = __phys_to_pfn(0x08000000),
  303. .length = 0x02000000,
  304. .type = MT_DEVICE
  305. }
  306. };
  307. static void __init collie_map_io(void)
  308. {
  309. sa1100_map_io();
  310. iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
  311. #ifdef CONFIG_SHARP_LOCOMO
  312. sa1100_register_uart_fns(&collie_port_fns);
  313. #endif
  314. sa1100_register_uart(0, 3);
  315. sa1100_register_uart(1, 1);
  316. }
  317. MACHINE_START(COLLIE, "Sharp-Collie")
  318. .map_io = collie_map_io,
  319. .init_irq = sa1100_init_irq,
  320. .timer = &sa1100_timer,
  321. .init_machine = collie_init,
  322. .restart = sa11x0_restart,
  323. MACHINE_END