Makefile 38 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238
  1. ifeq ("$(origin O)", "command line")
  2. OUTPUT := $(O)/
  3. endif
  4. # The default target of this Makefile is...
  5. all::
  6. # Define V=1 to have a more verbose compile.
  7. # Define V=2 to have an even more verbose compile.
  8. #
  9. # Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf()
  10. # or vsnprintf() return -1 instead of number of characters which would
  11. # have been written to the final string if enough space had been available.
  12. #
  13. # Define FREAD_READS_DIRECTORIES if your are on a system which succeeds
  14. # when attempting to read from an fopen'ed directory.
  15. #
  16. # Define NO_OPENSSL environment variable if you do not have OpenSSL.
  17. # This also implies MOZILLA_SHA1.
  18. #
  19. # Define CURLDIR=/foo/bar if your curl header and library files are in
  20. # /foo/bar/include and /foo/bar/lib directories.
  21. #
  22. # Define EXPATDIR=/foo/bar if your expat header and library files are in
  23. # /foo/bar/include and /foo/bar/lib directories.
  24. #
  25. # Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent.
  26. #
  27. # Define NO_D_TYPE_IN_DIRENT if your platform defines DT_UNKNOWN but lacks
  28. # d_type in struct dirent (latest Cygwin -- will be fixed soonish).
  29. #
  30. # Define NO_C99_FORMAT if your formatted IO functions (printf/scanf et.al.)
  31. # do not support the 'size specifiers' introduced by C99, namely ll, hh,
  32. # j, z, t. (representing long long int, char, intmax_t, size_t, ptrdiff_t).
  33. # some C compilers supported these specifiers prior to C99 as an extension.
  34. #
  35. # Define NO_STRCASESTR if you don't have strcasestr.
  36. #
  37. # Define NO_MEMMEM if you don't have memmem.
  38. #
  39. # Define NO_STRTOUMAX if you don't have strtoumax in the C library.
  40. # If your compiler also does not support long long or does not have
  41. # strtoull, define NO_STRTOULL.
  42. #
  43. # Define NO_SETENV if you don't have setenv in the C library.
  44. #
  45. # Define NO_UNSETENV if you don't have unsetenv in the C library.
  46. #
  47. # Define NO_MKDTEMP if you don't have mkdtemp in the C library.
  48. #
  49. # Define NO_SYS_SELECT_H if you don't have sys/select.h.
  50. #
  51. # Define NO_SYMLINK_HEAD if you never want .perf/HEAD to be a symbolic link.
  52. # Enable it on Windows. By default, symrefs are still used.
  53. #
  54. # Define NO_SVN_TESTS if you want to skip time-consuming SVN interoperability
  55. # tests. These tests take up a significant amount of the total test time
  56. # but are not needed unless you plan to talk to SVN repos.
  57. #
  58. # Define NO_FINK if you are building on Darwin/Mac OS X, have Fink
  59. # installed in /sw, but don't want PERF to link against any libraries
  60. # installed there. If defined you may specify your own (or Fink's)
  61. # include directories and library directories by defining CFLAGS
  62. # and LDFLAGS appropriately.
  63. #
  64. # Define NO_DARWIN_PORTS if you are building on Darwin/Mac OS X,
  65. # have DarwinPorts installed in /opt/local, but don't want PERF to
  66. # link against any libraries installed there. If defined you may
  67. # specify your own (or DarwinPort's) include directories and
  68. # library directories by defining CFLAGS and LDFLAGS appropriately.
  69. #
  70. # Define PPC_SHA1 environment variable when running make to make use of
  71. # a bundled SHA1 routine optimized for PowerPC.
  72. #
  73. # Define ARM_SHA1 environment variable when running make to make use of
  74. # a bundled SHA1 routine optimized for ARM.
  75. #
  76. # Define MOZILLA_SHA1 environment variable when running make to make use of
  77. # a bundled SHA1 routine coming from Mozilla. It is GPL'd and should be fast
  78. # on non-x86 architectures (e.g. PowerPC), while the OpenSSL version (default
  79. # choice) has very fast version optimized for i586.
  80. #
  81. # Define NEEDS_SSL_WITH_CRYPTO if you need -lcrypto with -lssl (Darwin).
  82. #
  83. # Define NEEDS_LIBICONV if linking with libc is not enough (Darwin).
  84. #
  85. # Define NEEDS_SOCKET if linking with libc is not enough (SunOS,
  86. # Patrick Mauritz).
  87. #
  88. # Define NO_MMAP if you want to avoid mmap.
  89. #
  90. # Define NO_PTHREADS if you do not have or do not want to use Pthreads.
  91. #
  92. # Define NO_PREAD if you have a problem with pread() system call (e.g.
  93. # cygwin.dll before v1.5.22).
  94. #
  95. # Define NO_FAST_WORKING_DIRECTORY if accessing objects in pack files is
  96. # generally faster on your platform than accessing the working directory.
  97. #
  98. # Define NO_TRUSTABLE_FILEMODE if your filesystem may claim to support
  99. # the executable mode bit, but doesn't really do so.
  100. #
  101. # Define NO_IPV6 if you lack IPv6 support and getaddrinfo().
  102. #
  103. # Define NO_SOCKADDR_STORAGE if your platform does not have struct
  104. # sockaddr_storage.
  105. #
  106. # Define NO_ICONV if your libc does not properly support iconv.
  107. #
  108. # Define OLD_ICONV if your library has an old iconv(), where the second
  109. # (input buffer pointer) parameter is declared with type (const char **).
  110. #
  111. # Define NO_DEFLATE_BOUND if your zlib does not have deflateBound.
  112. #
  113. # Define NO_R_TO_GCC_LINKER if your gcc does not like "-R/path/lib"
  114. # that tells runtime paths to dynamic libraries;
  115. # "-Wl,-rpath=/path/lib" is used instead.
  116. #
  117. # Define USE_NSEC below if you want perf to care about sub-second file mtimes
  118. # and ctimes. Note that you need recent glibc (at least 2.2.4) for this, and
  119. # it will BREAK YOUR LOCAL DIFFS! show-diff and anything using it will likely
  120. # randomly break unless your underlying filesystem supports those sub-second
  121. # times (my ext3 doesn't).
  122. #
  123. # Define USE_ST_TIMESPEC if your "struct stat" uses "st_ctimespec" instead of
  124. # "st_ctim"
  125. #
  126. # Define NO_NSEC if your "struct stat" does not have "st_ctim.tv_nsec"
  127. # available. This automatically turns USE_NSEC off.
  128. #
  129. # Define USE_STDEV below if you want perf to care about the underlying device
  130. # change being considered an inode change from the update-index perspective.
  131. #
  132. # Define NO_ST_BLOCKS_IN_STRUCT_STAT if your platform does not have st_blocks
  133. # field that counts the on-disk footprint in 512-byte blocks.
  134. #
  135. # Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8
  136. #
  137. # Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72.
  138. #
  139. # Define NO_PERL_MAKEMAKER if you cannot use Makefiles generated by perl's
  140. # MakeMaker (e.g. using ActiveState under Cygwin).
  141. #
  142. # Define NO_PERL if you do not want Perl scripts or libraries at all.
  143. #
  144. # Define INTERNAL_QSORT to use Git's implementation of qsort(), which
  145. # is a simplified version of the merge sort used in glibc. This is
  146. # recommended if Git triggers O(n^2) behavior in your platform's qsort().
  147. #
  148. # Define NO_EXTERNAL_GREP if you don't want "perf grep" to ever call
  149. # your external grep (e.g., if your system lacks grep, if its grep is
  150. # broken, or spawning external process is slower than built-in grep perf has).
  151. #
  152. # Define LDFLAGS=-static to build a static binary.
  153. #
  154. # Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds.
  155. #
  156. # Define NO_DWARF if you do not want debug-info analysis feature at all.
  157. $(shell sh -c 'mkdir -p $(OUTPUT)scripts/python/Perf-Trace-Util/' 2> /dev/null)
  158. $(shell sh -c 'mkdir -p $(OUTPUT)scripts/perl/Perf-Trace-Util/' 2> /dev/null)
  159. $(shell sh -c 'mkdir -p $(OUTPUT)util/scripting-engines/' 2> /dev/null)
  160. $(shell sh -c 'mkdir $(OUTPUT)bench' 2> /dev/null)
  161. $(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
  162. @$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
  163. -include $(OUTPUT)PERF-VERSION-FILE
  164. uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo not')
  165. uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo not')
  166. uname_O := $(shell sh -c 'uname -o 2>/dev/null || echo not')
  167. uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
  168. uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
  169. uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
  170. ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
  171. -e s/arm.*/arm/ -e s/sa110/arm/ \
  172. -e s/s390x/s390/ -e s/parisc64/parisc/ \
  173. -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
  174. -e s/sh[234].*/sh/ )
  175. # Additional ARCH settings for x86
  176. ifeq ($(ARCH),i386)
  177. ARCH := x86
  178. endif
  179. ifeq ($(ARCH),x86_64)
  180. ARCH := x86
  181. endif
  182. $(shell sh -c 'mkdir -p $(OUTPUT)arch/$(ARCH)/util/' 2> /dev/null)
  183. # CFLAGS and LDFLAGS are for the users to override from the command line.
  184. #
  185. # Include saner warnings here, which can catch bugs:
  186. #
  187. EXTRA_WARNINGS := -Wformat
  188. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-security
  189. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-y2k
  190. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wshadow
  191. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Winit-self
  192. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wpacked
  193. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wredundant-decls
  194. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstack-protector
  195. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-aliasing=3
  196. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wswitch-default
  197. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wswitch-enum
  198. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wno-system-headers
  199. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wundef
  200. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wvolatile-register-var
  201. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wwrite-strings
  202. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wbad-function-cast
  203. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wmissing-declarations
  204. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wmissing-prototypes
  205. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wnested-externs
  206. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wold-style-definition
  207. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-prototypes
  208. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wdeclaration-after-statement
  209. ifeq ("$(origin DEBUG)", "command line")
  210. PERF_DEBUG = $(DEBUG)
  211. endif
  212. ifndef PERF_DEBUG
  213. CFLAGS_OPTIMIZE = -O6
  214. endif
  215. CFLAGS = -ggdb3 -Wall -Wextra -std=gnu99 -Werror $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
  216. EXTLIBS = -lpthread -lrt -lelf -lm
  217. ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
  218. ALL_LDFLAGS = $(LDFLAGS)
  219. STRIP ?= strip
  220. # Among the variables below, these:
  221. # perfexecdir
  222. # template_dir
  223. # mandir
  224. # infodir
  225. # htmldir
  226. # ETC_PERFCONFIG (but not sysconfdir)
  227. # can be specified as a relative path some/where/else;
  228. # this is interpreted as relative to $(prefix) and "perf" at
  229. # runtime figures out where they are based on the path to the executable.
  230. # This can help installing the suite in a relocatable way.
  231. # Make the path relative to DESTDIR, not to prefix
  232. ifndef DESTDIR
  233. prefix = $(HOME)
  234. endif
  235. bindir_relative = bin
  236. bindir = $(prefix)/$(bindir_relative)
  237. mandir = share/man
  238. infodir = share/info
  239. perfexecdir = libexec/perf-core
  240. sharedir = $(prefix)/share
  241. template_dir = share/perf-core/templates
  242. htmldir = share/doc/perf-doc
  243. ifeq ($(prefix),/usr)
  244. sysconfdir = /etc
  245. ETC_PERFCONFIG = $(sysconfdir)/perfconfig
  246. else
  247. sysconfdir = $(prefix)/etc
  248. ETC_PERFCONFIG = etc/perfconfig
  249. endif
  250. lib = lib
  251. export prefix bindir sharedir sysconfdir
  252. CC = $(CROSS_COMPILE)gcc
  253. AR = $(CROSS_COMPILE)ar
  254. RM = rm -f
  255. TAR = tar
  256. FIND = find
  257. INSTALL = install
  258. RPMBUILD = rpmbuild
  259. PTHREAD_LIBS = -lpthread
  260. # sparse is architecture-neutral, which means that we need to tell it
  261. # explicitly what architecture to check for. Fix this up for yours..
  262. SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
  263. ifeq ($(V), 2)
  264. QUIET_STDERR = ">/dev/null"
  265. else
  266. QUIET_STDERR = ">/dev/null 2>&1"
  267. endif
  268. -include feature-tests.mak
  269. ifeq ($(call try-cc,$(SOURCE_HELLO),-Werror -fstack-protector-all),y)
  270. CFLAGS := $(CFLAGS) -fstack-protector-all
  271. endif
  272. ### --- END CONFIGURATION SECTION ---
  273. # Those must not be GNU-specific; they are shared with perl/ which may
  274. # be built by a different compiler. (Note that this is an artifact now
  275. # but it still might be nice to keep that distinction.)
  276. BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include
  277. BASIC_LDFLAGS =
  278. # Guard against environment variables
  279. BUILTIN_OBJS =
  280. BUILT_INS =
  281. COMPAT_CFLAGS =
  282. COMPAT_OBJS =
  283. LIB_H =
  284. LIB_OBJS =
  285. SCRIPT_PERL =
  286. SCRIPT_SH =
  287. TEST_PROGRAMS =
  288. SCRIPT_SH += perf-archive.sh
  289. #
  290. # No Perl scripts right now:
  291. #
  292. # SCRIPT_PERL += perf-add--interactive.perl
  293. SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) \
  294. $(patsubst %.perl,%,$(SCRIPT_PERL))
  295. # Empty...
  296. EXTRA_PROGRAMS =
  297. # ... and all the rest that could be moved out of bindir to perfexecdir
  298. PROGRAMS += $(EXTRA_PROGRAMS)
  299. #
  300. # Single 'perf' binary right now:
  301. #
  302. PROGRAMS += $(OUTPUT)perf
  303. # List built-in command $C whose implementation cmd_$C() is not in
  304. # builtin-$C.o but is linked in as part of some other command.
  305. #
  306. # what 'all' will build and 'install' will install, in perfexecdir
  307. ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
  308. # what 'all' will build but not install in perfexecdir
  309. OTHER_PROGRAMS = $(OUTPUT)perf$X
  310. # Set paths to tools early so that they can be used for version tests.
  311. ifndef SHELL_PATH
  312. SHELL_PATH = /bin/sh
  313. endif
  314. ifndef PERL_PATH
  315. PERL_PATH = /usr/bin/perl
  316. endif
  317. export PERL_PATH
  318. LIB_FILE=$(OUTPUT)libperf.a
  319. LIB_H += ../../include/linux/perf_event.h
  320. LIB_H += ../../include/linux/rbtree.h
  321. LIB_H += ../../include/linux/list.h
  322. LIB_H += ../../include/linux/hash.h
  323. LIB_H += ../../include/linux/stringify.h
  324. LIB_H += util/include/linux/bitmap.h
  325. LIB_H += util/include/linux/bitops.h
  326. LIB_H += util/include/linux/compiler.h
  327. LIB_H += util/include/linux/ctype.h
  328. LIB_H += util/include/linux/kernel.h
  329. LIB_H += util/include/linux/list.h
  330. LIB_H += util/include/linux/module.h
  331. LIB_H += util/include/linux/poison.h
  332. LIB_H += util/include/linux/prefetch.h
  333. LIB_H += util/include/linux/rbtree.h
  334. LIB_H += util/include/linux/string.h
  335. LIB_H += util/include/linux/types.h
  336. LIB_H += util/include/asm/asm-offsets.h
  337. LIB_H += util/include/asm/bug.h
  338. LIB_H += util/include/asm/byteorder.h
  339. LIB_H += util/include/asm/hweight.h
  340. LIB_H += util/include/asm/swab.h
  341. LIB_H += util/include/asm/system.h
  342. LIB_H += util/include/asm/uaccess.h
  343. LIB_H += util/include/dwarf-regs.h
  344. LIB_H += perf.h
  345. LIB_H += util/cache.h
  346. LIB_H += util/callchain.h
  347. LIB_H += util/build-id.h
  348. LIB_H += util/debug.h
  349. LIB_H += util/debugfs.h
  350. LIB_H += util/event.h
  351. LIB_H += util/exec_cmd.h
  352. LIB_H += util/types.h
  353. LIB_H += util/levenshtein.h
  354. LIB_H += util/map.h
  355. LIB_H += util/parse-options.h
  356. LIB_H += util/parse-events.h
  357. LIB_H += util/quote.h
  358. LIB_H += util/util.h
  359. LIB_H += util/header.h
  360. LIB_H += util/help.h
  361. LIB_H += util/session.h
  362. LIB_H += util/strbuf.h
  363. LIB_H += util/strlist.h
  364. LIB_H += util/svghelper.h
  365. LIB_H += util/run-command.h
  366. LIB_H += util/sigchain.h
  367. LIB_H += util/symbol.h
  368. LIB_H += util/color.h
  369. LIB_H += util/values.h
  370. LIB_H += util/sort.h
  371. LIB_H += util/hist.h
  372. LIB_H += util/thread.h
  373. LIB_H += util/trace-event.h
  374. LIB_H += util/probe-finder.h
  375. LIB_H += util/probe-event.h
  376. LIB_H += util/pstack.h
  377. LIB_H += util/cpumap.h
  378. LIB_OBJS += $(OUTPUT)util/abspath.o
  379. LIB_OBJS += $(OUTPUT)util/alias.o
  380. LIB_OBJS += $(OUTPUT)util/build-id.o
  381. LIB_OBJS += $(OUTPUT)util/config.o
  382. LIB_OBJS += $(OUTPUT)util/ctype.o
  383. LIB_OBJS += $(OUTPUT)util/debugfs.o
  384. LIB_OBJS += $(OUTPUT)util/environment.o
  385. LIB_OBJS += $(OUTPUT)util/event.o
  386. LIB_OBJS += $(OUTPUT)util/exec_cmd.o
  387. LIB_OBJS += $(OUTPUT)util/help.o
  388. LIB_OBJS += $(OUTPUT)util/levenshtein.o
  389. LIB_OBJS += $(OUTPUT)util/parse-options.o
  390. LIB_OBJS += $(OUTPUT)util/parse-events.o
  391. LIB_OBJS += $(OUTPUT)util/path.o
  392. LIB_OBJS += $(OUTPUT)util/rbtree.o
  393. LIB_OBJS += $(OUTPUT)util/bitmap.o
  394. LIB_OBJS += $(OUTPUT)util/hweight.o
  395. LIB_OBJS += $(OUTPUT)util/run-command.o
  396. LIB_OBJS += $(OUTPUT)util/quote.o
  397. LIB_OBJS += $(OUTPUT)util/strbuf.o
  398. LIB_OBJS += $(OUTPUT)util/string.o
  399. LIB_OBJS += $(OUTPUT)util/strlist.o
  400. LIB_OBJS += $(OUTPUT)util/usage.o
  401. LIB_OBJS += $(OUTPUT)util/wrapper.o
  402. LIB_OBJS += $(OUTPUT)util/sigchain.o
  403. LIB_OBJS += $(OUTPUT)util/symbol.o
  404. LIB_OBJS += $(OUTPUT)util/color.o
  405. LIB_OBJS += $(OUTPUT)util/pager.o
  406. LIB_OBJS += $(OUTPUT)util/header.o
  407. LIB_OBJS += $(OUTPUT)util/callchain.o
  408. LIB_OBJS += $(OUTPUT)util/values.o
  409. LIB_OBJS += $(OUTPUT)util/debug.o
  410. LIB_OBJS += $(OUTPUT)util/map.o
  411. LIB_OBJS += $(OUTPUT)util/pstack.o
  412. LIB_OBJS += $(OUTPUT)util/session.o
  413. LIB_OBJS += $(OUTPUT)util/thread.o
  414. LIB_OBJS += $(OUTPUT)util/trace-event-parse.o
  415. LIB_OBJS += $(OUTPUT)util/trace-event-read.o
  416. LIB_OBJS += $(OUTPUT)util/trace-event-info.o
  417. LIB_OBJS += $(OUTPUT)util/trace-event-scripting.o
  418. LIB_OBJS += $(OUTPUT)util/svghelper.o
  419. LIB_OBJS += $(OUTPUT)util/sort.o
  420. LIB_OBJS += $(OUTPUT)util/hist.o
  421. LIB_OBJS += $(OUTPUT)util/probe-event.o
  422. LIB_OBJS += $(OUTPUT)util/util.o
  423. LIB_OBJS += $(OUTPUT)util/cpumap.o
  424. BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o
  425. BUILTIN_OBJS += $(OUTPUT)builtin-bench.o
  426. # Benchmark modules
  427. BUILTIN_OBJS += $(OUTPUT)bench/sched-messaging.o
  428. BUILTIN_OBJS += $(OUTPUT)bench/sched-pipe.o
  429. BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy.o
  430. BUILTIN_OBJS += $(OUTPUT)builtin-diff.o
  431. BUILTIN_OBJS += $(OUTPUT)builtin-help.o
  432. BUILTIN_OBJS += $(OUTPUT)builtin-sched.o
  433. BUILTIN_OBJS += $(OUTPUT)builtin-buildid-list.o
  434. BUILTIN_OBJS += $(OUTPUT)builtin-buildid-cache.o
  435. BUILTIN_OBJS += $(OUTPUT)builtin-list.o
  436. BUILTIN_OBJS += $(OUTPUT)builtin-record.o
  437. BUILTIN_OBJS += $(OUTPUT)builtin-report.o
  438. BUILTIN_OBJS += $(OUTPUT)builtin-stat.o
  439. BUILTIN_OBJS += $(OUTPUT)builtin-timechart.o
  440. BUILTIN_OBJS += $(OUTPUT)builtin-top.o
  441. BUILTIN_OBJS += $(OUTPUT)builtin-trace.o
  442. BUILTIN_OBJS += $(OUTPUT)builtin-probe.o
  443. BUILTIN_OBJS += $(OUTPUT)builtin-kmem.o
  444. BUILTIN_OBJS += $(OUTPUT)builtin-lock.o
  445. BUILTIN_OBJS += $(OUTPUT)builtin-kvm.o
  446. BUILTIN_OBJS += $(OUTPUT)builtin-test.o
  447. BUILTIN_OBJS += $(OUTPUT)builtin-inject.o
  448. PERFLIBS = $(LIB_FILE)
  449. #
  450. # Platform specific tweaks
  451. #
  452. # We choose to avoid "if .. else if .. else .. endif endif"
  453. # because maintaining the nesting to match is a pain. If
  454. # we had "elif" things would have been much nicer...
  455. -include config.mak.autogen
  456. -include config.mak
  457. ifndef NO_DWARF
  458. FLAGS_DWARF=$(ALL_CFLAGS) -I/usr/include/elfutils -ldw -lelf $(ALL_LDFLAGS) $(EXTLIBS)
  459. ifneq ($(call try-cc,$(SOURCE_DWARF),$(FLAGS_DWARF)),y)
  460. msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
  461. NO_DWARF := 1
  462. endif # Dwarf support
  463. endif # NO_DWARF
  464. -include arch/$(ARCH)/Makefile
  465. ifeq ($(uname_S),Darwin)
  466. ifndef NO_FINK
  467. ifeq ($(shell test -d /sw/lib && echo y),y)
  468. BASIC_CFLAGS += -I/sw/include
  469. BASIC_LDFLAGS += -L/sw/lib
  470. endif
  471. endif
  472. ifndef NO_DARWIN_PORTS
  473. ifeq ($(shell test -d /opt/local/lib && echo y),y)
  474. BASIC_CFLAGS += -I/opt/local/include
  475. BASIC_LDFLAGS += -L/opt/local/lib
  476. endif
  477. endif
  478. PTHREAD_LIBS =
  479. endif
  480. ifneq ($(OUTPUT),)
  481. BASIC_CFLAGS += -I$(OUTPUT)
  482. endif
  483. FLAGS_LIBELF=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS)
  484. ifneq ($(call try-cc,$(SOURCE_LIBELF),$(FLAGS_LIBELF)),y)
  485. FLAGS_GLIBC=$(ALL_CFLAGS) $(ALL_LDFLAGS)
  486. ifneq ($(call try-cc,$(SOURCE_GLIBC),$(FLAGS_GLIBC)),y)
  487. msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
  488. else
  489. msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel);
  490. endif
  491. endif
  492. ifneq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_COMMON)),y)
  493. BASIC_CFLAGS += -DLIBELF_NO_MMAP
  494. endif
  495. ifndef NO_DWARF
  496. ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
  497. msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
  498. else
  499. BASIC_CFLAGS += -I/usr/include/elfutils -DDWARF_SUPPORT
  500. EXTLIBS += -lelf -ldw
  501. LIB_OBJS += $(OUTPUT)util/probe-finder.o
  502. endif # PERF_HAVE_DWARF_REGS
  503. endif # NO_DWARF
  504. ifdef NO_NEWT
  505. BASIC_CFLAGS += -DNO_NEWT_SUPPORT
  506. else
  507. FLAGS_NEWT=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -lnewt
  508. ifneq ($(call try-cc,$(SOURCE_NEWT),$(FLAGS_NEWT)),y)
  509. msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev);
  510. BASIC_CFLAGS += -DNO_NEWT_SUPPORT
  511. else
  512. # Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
  513. BASIC_CFLAGS += -I/usr/include/slang
  514. EXTLIBS += -lnewt -lslang
  515. LIB_OBJS += $(OUTPUT)util/newt.o
  516. endif
  517. endif
  518. ifdef NO_LIBPERL
  519. BASIC_CFLAGS += -DNO_LIBPERL
  520. else
  521. PERL_EMBED_LDOPTS = `perl -MExtUtils::Embed -e ldopts 2>/dev/null`
  522. PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
  523. FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
  524. ifneq ($(call try-cc,$(SOURCE_PERL_EMBED),$(FLAGS_PERL_EMBED)),y)
  525. BASIC_CFLAGS += -DNO_LIBPERL
  526. else
  527. ALL_LDFLAGS += $(PERL_EMBED_LDOPTS)
  528. LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-perl.o
  529. LIB_OBJS += $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o
  530. endif
  531. endif
  532. ifdef NO_LIBPYTHON
  533. BASIC_CFLAGS += -DNO_LIBPYTHON
  534. else
  535. PYTHON_EMBED_LDOPTS = `python-config --ldflags 2>/dev/null`
  536. PYTHON_EMBED_CCOPTS = `python-config --cflags 2>/dev/null`
  537. FLAGS_PYTHON_EMBED=$(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
  538. ifneq ($(call try-cc,$(SOURCE_PYTHON_EMBED),$(FLAGS_PYTHON_EMBED)),y)
  539. BASIC_CFLAGS += -DNO_LIBPYTHON
  540. else
  541. ALL_LDFLAGS += $(PYTHON_EMBED_LDOPTS)
  542. LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
  543. LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
  544. endif
  545. endif
  546. ifdef NO_DEMANGLE
  547. BASIC_CFLAGS += -DNO_DEMANGLE
  548. else
  549. ifdef HAVE_CPLUS_DEMANGLE
  550. EXTLIBS += -liberty
  551. BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
  552. else
  553. FLAGS_BFD=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd
  554. has_bfd := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD))
  555. ifeq ($(has_bfd),y)
  556. EXTLIBS += -lbfd
  557. else
  558. FLAGS_BFD_IBERTY=$(FLAGS_BFD) -liberty
  559. has_bfd_iberty := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY))
  560. ifeq ($(has_bfd_iberty),y)
  561. EXTLIBS += -lbfd -liberty
  562. else
  563. FLAGS_BFD_IBERTY_Z=$(FLAGS_BFD_IBERTY) -lz
  564. has_bfd_iberty_z := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY_Z))
  565. ifeq ($(has_bfd_iberty_z),y)
  566. EXTLIBS += -lbfd -liberty -lz
  567. else
  568. FLAGS_CPLUS_DEMANGLE=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -liberty
  569. has_cplus_demangle := $(call try-cc,$(SOURCE_CPLUS_DEMANGLE),$(FLAGS_CPLUS_DEMANGLE))
  570. ifeq ($(has_cplus_demangle),y)
  571. EXTLIBS += -liberty
  572. BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
  573. else
  574. msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
  575. BASIC_CFLAGS += -DNO_DEMANGLE
  576. endif
  577. endif
  578. endif
  579. endif
  580. endif
  581. endif
  582. ifndef CC_LD_DYNPATH
  583. ifdef NO_R_TO_GCC_LINKER
  584. # Some gcc does not accept and pass -R to the linker to specify
  585. # the runtime dynamic library path.
  586. CC_LD_DYNPATH = -Wl,-rpath,
  587. else
  588. CC_LD_DYNPATH = -R
  589. endif
  590. endif
  591. ifdef NEEDS_SOCKET
  592. EXTLIBS += -lsocket
  593. endif
  594. ifdef NEEDS_NSL
  595. EXTLIBS += -lnsl
  596. endif
  597. ifdef NO_D_TYPE_IN_DIRENT
  598. BASIC_CFLAGS += -DNO_D_TYPE_IN_DIRENT
  599. endif
  600. ifdef NO_D_INO_IN_DIRENT
  601. BASIC_CFLAGS += -DNO_D_INO_IN_DIRENT
  602. endif
  603. ifdef NO_ST_BLOCKS_IN_STRUCT_STAT
  604. BASIC_CFLAGS += -DNO_ST_BLOCKS_IN_STRUCT_STAT
  605. endif
  606. ifdef USE_NSEC
  607. BASIC_CFLAGS += -DUSE_NSEC
  608. endif
  609. ifdef USE_ST_TIMESPEC
  610. BASIC_CFLAGS += -DUSE_ST_TIMESPEC
  611. endif
  612. ifdef NO_NSEC
  613. BASIC_CFLAGS += -DNO_NSEC
  614. endif
  615. ifdef NO_C99_FORMAT
  616. BASIC_CFLAGS += -DNO_C99_FORMAT
  617. endif
  618. ifdef SNPRINTF_RETURNS_BOGUS
  619. COMPAT_CFLAGS += -DSNPRINTF_RETURNS_BOGUS
  620. COMPAT_OBJS += $(OUTPUT)compat/snprintf.o
  621. endif
  622. ifdef FREAD_READS_DIRECTORIES
  623. COMPAT_CFLAGS += -DFREAD_READS_DIRECTORIES
  624. COMPAT_OBJS += $(OUTPUT)compat/fopen.o
  625. endif
  626. ifdef NO_SYMLINK_HEAD
  627. BASIC_CFLAGS += -DNO_SYMLINK_HEAD
  628. endif
  629. ifdef NO_STRCASESTR
  630. COMPAT_CFLAGS += -DNO_STRCASESTR
  631. COMPAT_OBJS += $(OUTPUT)compat/strcasestr.o
  632. endif
  633. ifdef NO_STRTOUMAX
  634. COMPAT_CFLAGS += -DNO_STRTOUMAX
  635. COMPAT_OBJS += $(OUTPUT)compat/strtoumax.o
  636. endif
  637. ifdef NO_STRTOULL
  638. COMPAT_CFLAGS += -DNO_STRTOULL
  639. endif
  640. ifdef NO_SETENV
  641. COMPAT_CFLAGS += -DNO_SETENV
  642. COMPAT_OBJS += $(OUTPUT)compat/setenv.o
  643. endif
  644. ifdef NO_MKDTEMP
  645. COMPAT_CFLAGS += -DNO_MKDTEMP
  646. COMPAT_OBJS += $(OUTPUT)compat/mkdtemp.o
  647. endif
  648. ifdef NO_UNSETENV
  649. COMPAT_CFLAGS += -DNO_UNSETENV
  650. COMPAT_OBJS += $(OUTPUT)compat/unsetenv.o
  651. endif
  652. ifdef NO_SYS_SELECT_H
  653. BASIC_CFLAGS += -DNO_SYS_SELECT_H
  654. endif
  655. ifdef NO_MMAP
  656. COMPAT_CFLAGS += -DNO_MMAP
  657. COMPAT_OBJS += $(OUTPUT)compat/mmap.o
  658. else
  659. ifdef USE_WIN32_MMAP
  660. COMPAT_CFLAGS += -DUSE_WIN32_MMAP
  661. COMPAT_OBJS += $(OUTPUT)compat/win32mmap.o
  662. endif
  663. endif
  664. ifdef NO_PREAD
  665. COMPAT_CFLAGS += -DNO_PREAD
  666. COMPAT_OBJS += $(OUTPUT)compat/pread.o
  667. endif
  668. ifdef NO_FAST_WORKING_DIRECTORY
  669. BASIC_CFLAGS += -DNO_FAST_WORKING_DIRECTORY
  670. endif
  671. ifdef NO_TRUSTABLE_FILEMODE
  672. BASIC_CFLAGS += -DNO_TRUSTABLE_FILEMODE
  673. endif
  674. ifdef NO_IPV6
  675. BASIC_CFLAGS += -DNO_IPV6
  676. endif
  677. ifdef NO_UINTMAX_T
  678. BASIC_CFLAGS += -Duintmax_t=uint32_t
  679. endif
  680. ifdef NO_SOCKADDR_STORAGE
  681. ifdef NO_IPV6
  682. BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in
  683. else
  684. BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in6
  685. endif
  686. endif
  687. ifdef NO_INET_NTOP
  688. LIB_OBJS += $(OUTPUT)compat/inet_ntop.o
  689. endif
  690. ifdef NO_INET_PTON
  691. LIB_OBJS += $(OUTPUT)compat/inet_pton.o
  692. endif
  693. ifdef NO_ICONV
  694. BASIC_CFLAGS += -DNO_ICONV
  695. endif
  696. ifdef OLD_ICONV
  697. BASIC_CFLAGS += -DOLD_ICONV
  698. endif
  699. ifdef NO_DEFLATE_BOUND
  700. BASIC_CFLAGS += -DNO_DEFLATE_BOUND
  701. endif
  702. ifdef PPC_SHA1
  703. SHA1_HEADER = "ppc/sha1.h"
  704. LIB_OBJS += $(OUTPUT)ppc/sha1.o ppc/sha1ppc.o
  705. else
  706. ifdef ARM_SHA1
  707. SHA1_HEADER = "arm/sha1.h"
  708. LIB_OBJS += $(OUTPUT)arm/sha1.o $(OUTPUT)arm/sha1_arm.o
  709. else
  710. ifdef MOZILLA_SHA1
  711. SHA1_HEADER = "mozilla-sha1/sha1.h"
  712. LIB_OBJS += $(OUTPUT)mozilla-sha1/sha1.o
  713. else
  714. SHA1_HEADER = <openssl/sha.h>
  715. EXTLIBS += $(LIB_4_CRYPTO)
  716. endif
  717. endif
  718. endif
  719. ifdef NO_PERL_MAKEMAKER
  720. export NO_PERL_MAKEMAKER
  721. endif
  722. ifdef NO_HSTRERROR
  723. COMPAT_CFLAGS += -DNO_HSTRERROR
  724. COMPAT_OBJS += $(OUTPUT)compat/hstrerror.o
  725. endif
  726. ifdef NO_MEMMEM
  727. COMPAT_CFLAGS += -DNO_MEMMEM
  728. COMPAT_OBJS += $(OUTPUT)compat/memmem.o
  729. endif
  730. ifdef INTERNAL_QSORT
  731. COMPAT_CFLAGS += -DINTERNAL_QSORT
  732. COMPAT_OBJS += $(OUTPUT)compat/qsort.o
  733. endif
  734. ifdef RUNTIME_PREFIX
  735. COMPAT_CFLAGS += -DRUNTIME_PREFIX
  736. endif
  737. ifdef DIR_HAS_BSD_GROUP_SEMANTICS
  738. COMPAT_CFLAGS += -DDIR_HAS_BSD_GROUP_SEMANTICS
  739. endif
  740. ifdef NO_EXTERNAL_GREP
  741. BASIC_CFLAGS += -DNO_EXTERNAL_GREP
  742. endif
  743. ifeq ($(PERL_PATH),)
  744. NO_PERL=NoThanks
  745. endif
  746. QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir
  747. QUIET_SUBDIR1 =
  748. ifneq ($(findstring $(MAKEFLAGS),w),w)
  749. PRINT_DIR = --no-print-directory
  750. else # "make -w"
  751. NO_SUBDIR = :
  752. endif
  753. ifneq ($(findstring $(MAKEFLAGS),s),s)
  754. ifndef V
  755. QUIET_CC = @echo ' ' CC $@;
  756. QUIET_AR = @echo ' ' AR $@;
  757. QUIET_LINK = @echo ' ' LINK $@;
  758. QUIET_BUILT_IN = @echo ' ' BUILTIN $@;
  759. QUIET_GEN = @echo ' ' GEN $@;
  760. QUIET_SUBDIR0 = +@subdir=
  761. QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \
  762. $(MAKE) $(PRINT_DIR) -C $$subdir
  763. export V
  764. export QUIET_GEN
  765. export QUIET_BUILT_IN
  766. endif
  767. endif
  768. ifdef ASCIIDOC8
  769. export ASCIIDOC8
  770. endif
  771. # Shell quote (do not use $(call) to accommodate ancient setups);
  772. SHA1_HEADER_SQ = $(subst ','\'',$(SHA1_HEADER))
  773. ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
  774. DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
  775. bindir_SQ = $(subst ','\'',$(bindir))
  776. bindir_relative_SQ = $(subst ','\'',$(bindir_relative))
  777. mandir_SQ = $(subst ','\'',$(mandir))
  778. infodir_SQ = $(subst ','\'',$(infodir))
  779. perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
  780. template_dir_SQ = $(subst ','\'',$(template_dir))
  781. htmldir_SQ = $(subst ','\'',$(htmldir))
  782. prefix_SQ = $(subst ','\'',$(prefix))
  783. SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
  784. PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
  785. LIBS = $(PERFLIBS) $(EXTLIBS)
  786. BASIC_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' \
  787. $(COMPAT_CFLAGS)
  788. LIB_OBJS += $(COMPAT_OBJS)
  789. ALL_CFLAGS += $(BASIC_CFLAGS)
  790. ALL_LDFLAGS += $(BASIC_LDFLAGS)
  791. export TAR INSTALL DESTDIR SHELL_PATH
  792. ### Build rules
  793. SHELL = $(SHELL_PATH)
  794. all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) $(OUTPUT)PERF-BUILD-OPTIONS
  795. ifneq (,$X)
  796. $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';)
  797. endif
  798. all::
  799. please_set_SHELL_PATH_to_a_more_modern_shell:
  800. @$$(:)
  801. shell_compatibility_test: please_set_SHELL_PATH_to_a_more_modern_shell
  802. strip: $(PROGRAMS) $(OUTPUT)perf$X
  803. $(STRIP) $(STRIP_OPTS) $(PROGRAMS) $(OUTPUT)perf$X
  804. $(OUTPUT)perf.o: perf.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
  805. $(QUIET_CC)$(CC) -DPERF_VERSION='"$(PERF_VERSION)"' \
  806. '-DPERF_HTML_PATH="$(htmldir_SQ)"' \
  807. $(ALL_CFLAGS) -c $(filter %.c,$^) -o $@
  808. $(OUTPUT)perf$X: $(OUTPUT)perf.o $(BUILTIN_OBJS) $(PERFLIBS)
  809. $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(OUTPUT)perf.o \
  810. $(BUILTIN_OBJS) $(ALL_LDFLAGS) $(LIBS)
  811. $(OUTPUT)builtin-help.o: builtin-help.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
  812. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
  813. '-DPERF_HTML_PATH="$(htmldir_SQ)"' \
  814. '-DPERF_MAN_PATH="$(mandir_SQ)"' \
  815. '-DPERF_INFO_PATH="$(infodir_SQ)"' $<
  816. $(OUTPUT)builtin-timechart.o: builtin-timechart.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
  817. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
  818. '-DPERF_HTML_PATH="$(htmldir_SQ)"' \
  819. '-DPERF_MAN_PATH="$(mandir_SQ)"' \
  820. '-DPERF_INFO_PATH="$(infodir_SQ)"' $<
  821. $(BUILT_INS): $(OUTPUT)perf$X
  822. $(QUIET_BUILT_IN)$(RM) $@ && \
  823. ln perf$X $@ 2>/dev/null || \
  824. ln -s perf$X $@ 2>/dev/null || \
  825. cp perf$X $@
  826. $(OUTPUT)common-cmds.h: util/generate-cmdlist.sh command-list.txt
  827. $(OUTPUT)common-cmds.h: $(wildcard Documentation/perf-*.txt)
  828. $(QUIET_GEN). util/generate-cmdlist.sh > $@+ && mv $@+ $@
  829. $(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh
  830. $(QUIET_GEN)$(RM) $@ $@+ && \
  831. sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
  832. -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \
  833. -e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \
  834. -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \
  835. -e 's/@@NO_CURL@@/$(NO_CURL)/g' \
  836. $@.sh >$@+ && \
  837. chmod +x $@+ && \
  838. mv $@+ $(OUTPUT)$@
  839. configure: configure.ac
  840. $(QUIET_GEN)$(RM) $@ $<+ && \
  841. sed -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \
  842. $< > $<+ && \
  843. autoconf -o $@ $<+ && \
  844. $(RM) $<+
  845. # These can record PERF_VERSION
  846. $(OUTPUT)perf.o perf.spec \
  847. $(patsubst %.sh,%,$(SCRIPT_SH)) \
  848. $(patsubst %.perl,%,$(SCRIPT_PERL)) \
  849. : $(OUTPUT)PERF-VERSION-FILE
  850. $(OUTPUT)%.o: %.c $(OUTPUT)PERF-CFLAGS
  851. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $<
  852. $(OUTPUT)%.s: %.c $(OUTPUT)PERF-CFLAGS
  853. $(QUIET_CC)$(CC) -S $(ALL_CFLAGS) $<
  854. $(OUTPUT)%.o: %.S
  855. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $<
  856. $(OUTPUT)util/exec_cmd.o: util/exec_cmd.c $(OUTPUT)PERF-CFLAGS
  857. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
  858. '-DPERF_EXEC_PATH="$(perfexecdir_SQ)"' \
  859. '-DBINDIR="$(bindir_relative_SQ)"' \
  860. '-DPREFIX="$(prefix_SQ)"' \
  861. $<
  862. $(OUTPUT)builtin-init-db.o: builtin-init-db.c $(OUTPUT)PERF-CFLAGS
  863. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DDEFAULT_PERF_TEMPLATE_DIR='"$(template_dir_SQ)"' $<
  864. $(OUTPUT)util/config.o: util/config.c $(OUTPUT)PERF-CFLAGS
  865. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
  866. $(OUTPUT)util/newt.o: util/newt.c $(OUTPUT)PERF-CFLAGS
  867. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  868. $(OUTPUT)util/rbtree.o: ../../lib/rbtree.c $(OUTPUT)PERF-CFLAGS
  869. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
  870. $(OUTPUT)util/scripting-engines/trace-event-perl.o: util/scripting-engines/trace-event-perl.c $(OUTPUT)PERF-CFLAGS
  871. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
  872. $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o: scripts/perl/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
  873. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
  874. $(OUTPUT)util/scripting-engines/trace-event-python.o: util/scripting-engines/trace-event-python.c $(OUTPUT)PERF-CFLAGS
  875. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
  876. $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o: scripts/python/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
  877. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
  878. $(OUTPUT)perf-%$X: %.o $(PERFLIBS)
  879. $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
  880. $(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H)
  881. $(patsubst perf-%$X,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h)
  882. builtin-revert.o wt-status.o: wt-status.h
  883. $(LIB_FILE): $(LIB_OBJS)
  884. $(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIB_OBJS)
  885. doc:
  886. $(MAKE) -C Documentation all
  887. man:
  888. $(MAKE) -C Documentation man
  889. html:
  890. $(MAKE) -C Documentation html
  891. info:
  892. $(MAKE) -C Documentation info
  893. pdf:
  894. $(MAKE) -C Documentation pdf
  895. TAGS:
  896. $(RM) TAGS
  897. $(FIND) . -name '*.[hcS]' -print | xargs etags -a
  898. tags:
  899. $(RM) tags
  900. $(FIND) . -name '*.[hcS]' -print | xargs ctags -a
  901. cscope:
  902. $(RM) cscope*
  903. $(FIND) . -name '*.[hcS]' -print | xargs cscope -b
  904. ### Detect prefix changes
  905. TRACK_CFLAGS = $(subst ','\'',$(ALL_CFLAGS)):\
  906. $(bindir_SQ):$(perfexecdir_SQ):$(template_dir_SQ):$(prefix_SQ)
  907. $(OUTPUT)PERF-CFLAGS: .FORCE-PERF-CFLAGS
  908. @FLAGS='$(TRACK_CFLAGS)'; \
  909. if test x"$$FLAGS" != x"`cat $(OUTPUT)PERF-CFLAGS 2>/dev/null`" ; then \
  910. echo 1>&2 " * new build flags or prefix"; \
  911. echo "$$FLAGS" >$(OUTPUT)PERF-CFLAGS; \
  912. fi
  913. # We need to apply sq twice, once to protect from the shell
  914. # that runs $(OUTPUT)PERF-BUILD-OPTIONS, and then again to protect it
  915. # and the first level quoting from the shell that runs "echo".
  916. $(OUTPUT)PERF-BUILD-OPTIONS: .FORCE-PERF-BUILD-OPTIONS
  917. @echo SHELL_PATH=\''$(subst ','\'',$(SHELL_PATH_SQ))'\' >$@
  918. @echo TAR=\''$(subst ','\'',$(subst ','\'',$(TAR)))'\' >>$@
  919. @echo NO_CURL=\''$(subst ','\'',$(subst ','\'',$(NO_CURL)))'\' >>$@
  920. @echo NO_PERL=\''$(subst ','\'',$(subst ','\'',$(NO_PERL)))'\' >>$@
  921. ### Testing rules
  922. #
  923. # None right now:
  924. #
  925. # TEST_PROGRAMS += test-something$X
  926. all:: $(TEST_PROGRAMS)
  927. # GNU make supports exporting all variables by "export" without parameters.
  928. # However, the environment gets quite big, and some programs have problems
  929. # with that.
  930. export NO_SVN_TESTS
  931. check: $(OUTPUT)common-cmds.h
  932. if sparse; \
  933. then \
  934. for i in *.c */*.c; \
  935. do \
  936. sparse $(ALL_CFLAGS) $(SPARSE_FLAGS) $$i || exit; \
  937. done; \
  938. else \
  939. echo 2>&1 "Did you mean 'make test'?"; \
  940. exit 1; \
  941. fi
  942. remove-dashes:
  943. ./fixup-builtins $(BUILT_INS) $(PROGRAMS) $(SCRIPTS)
  944. ### Installation rules
  945. ifneq ($(filter /%,$(firstword $(template_dir))),)
  946. template_instdir = $(template_dir)
  947. else
  948. template_instdir = $(prefix)/$(template_dir)
  949. endif
  950. export template_instdir
  951. ifneq ($(filter /%,$(firstword $(perfexecdir))),)
  952. perfexec_instdir = $(perfexecdir)
  953. else
  954. perfexec_instdir = $(prefix)/$(perfexecdir)
  955. endif
  956. perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
  957. export perfexec_instdir
  958. install: all
  959. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
  960. $(INSTALL) $(OUTPUT)perf$X '$(DESTDIR_SQ)$(bindir_SQ)'
  961. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
  962. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
  963. $(INSTALL) $(OUTPUT)perf-archive -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
  964. $(INSTALL) scripts/perl/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
  965. $(INSTALL) scripts/perl/*.pl -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl'
  966. $(INSTALL) scripts/perl/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
  967. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'
  968. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
  969. $(INSTALL) scripts/python/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'
  970. $(INSTALL) scripts/python/*.py -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python'
  971. $(INSTALL) scripts/python/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
  972. ifdef BUILT_INS
  973. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
  974. $(INSTALL) $(BUILT_INS) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
  975. ifneq (,$X)
  976. $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) $(OUTPUT)perf$X)), $(RM) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/$p';)
  977. endif
  978. endif
  979. install-doc:
  980. $(MAKE) -C Documentation install
  981. install-man:
  982. $(MAKE) -C Documentation install-man
  983. install-html:
  984. $(MAKE) -C Documentation install-html
  985. install-info:
  986. $(MAKE) -C Documentation install-info
  987. install-pdf:
  988. $(MAKE) -C Documentation install-pdf
  989. quick-install-doc:
  990. $(MAKE) -C Documentation quick-install
  991. quick-install-man:
  992. $(MAKE) -C Documentation quick-install-man
  993. quick-install-html:
  994. $(MAKE) -C Documentation quick-install-html
  995. ### Maintainer's dist rules
  996. #
  997. # None right now
  998. #
  999. #
  1000. # perf.spec: perf.spec.in
  1001. # sed -e 's/@@VERSION@@/$(PERF_VERSION)/g' < $< > $@+
  1002. # mv $@+ $@
  1003. #
  1004. # PERF_TARNAME=perf-$(PERF_VERSION)
  1005. # dist: perf.spec perf-archive$(X) configure
  1006. # ./perf-archive --format=tar \
  1007. # --prefix=$(PERF_TARNAME)/ HEAD^{tree} > $(PERF_TARNAME).tar
  1008. # @mkdir -p $(PERF_TARNAME)
  1009. # @cp perf.spec configure $(PERF_TARNAME)
  1010. # @echo $(PERF_VERSION) > $(PERF_TARNAME)/version
  1011. # $(TAR) rf $(PERF_TARNAME).tar \
  1012. # $(PERF_TARNAME)/perf.spec \
  1013. # $(PERF_TARNAME)/configure \
  1014. # $(PERF_TARNAME)/version
  1015. # @$(RM) -r $(PERF_TARNAME)
  1016. # gzip -f -9 $(PERF_TARNAME).tar
  1017. #
  1018. # htmldocs = perf-htmldocs-$(PERF_VERSION)
  1019. # manpages = perf-manpages-$(PERF_VERSION)
  1020. # dist-doc:
  1021. # $(RM) -r .doc-tmp-dir
  1022. # mkdir .doc-tmp-dir
  1023. # $(MAKE) -C Documentation WEBDOC_DEST=../.doc-tmp-dir install-webdoc
  1024. # cd .doc-tmp-dir && $(TAR) cf ../$(htmldocs).tar .
  1025. # gzip -n -9 -f $(htmldocs).tar
  1026. # :
  1027. # $(RM) -r .doc-tmp-dir
  1028. # mkdir -p .doc-tmp-dir/man1 .doc-tmp-dir/man5 .doc-tmp-dir/man7
  1029. # $(MAKE) -C Documentation DESTDIR=./ \
  1030. # man1dir=../.doc-tmp-dir/man1 \
  1031. # man5dir=../.doc-tmp-dir/man5 \
  1032. # man7dir=../.doc-tmp-dir/man7 \
  1033. # install
  1034. # cd .doc-tmp-dir && $(TAR) cf ../$(manpages).tar .
  1035. # gzip -n -9 -f $(manpages).tar
  1036. # $(RM) -r .doc-tmp-dir
  1037. #
  1038. # rpm: dist
  1039. # $(RPMBUILD) -ta $(PERF_TARNAME).tar.gz
  1040. ### Cleaning rules
  1041. distclean: clean
  1042. # $(RM) configure
  1043. clean:
  1044. $(RM) *.o */*.o */*/*.o */*/*/*.o $(LIB_FILE)
  1045. $(RM) $(ALL_PROGRAMS) $(BUILT_INS) perf$X
  1046. $(RM) $(TEST_PROGRAMS)
  1047. $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope*
  1048. $(RM) -r autom4te.cache
  1049. $(RM) config.log config.mak.autogen config.mak.append config.status config.cache
  1050. $(RM) -r $(PERF_TARNAME) .doc-tmp-dir
  1051. $(RM) $(PERF_TARNAME).tar.gz perf-core_$(PERF_VERSION)-*.tar.gz
  1052. $(RM) $(htmldocs).tar.gz $(manpages).tar.gz
  1053. $(MAKE) -C Documentation/ clean
  1054. $(RM) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS $(OUTPUT)PERF-BUILD-OPTIONS
  1055. .PHONY: all install clean strip
  1056. .PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
  1057. .PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS
  1058. .PHONY: .FORCE-PERF-BUILD-OPTIONS
  1059. ### Make sure built-ins do not have dups and listed in perf.c
  1060. #
  1061. check-builtins::
  1062. ./check-builtins.sh
  1063. ### Test suite coverage testing
  1064. #
  1065. # None right now
  1066. #
  1067. # .PHONY: coverage coverage-clean coverage-build coverage-report
  1068. #
  1069. # coverage:
  1070. # $(MAKE) coverage-build
  1071. # $(MAKE) coverage-report
  1072. #
  1073. # coverage-clean:
  1074. # rm -f *.gcda *.gcno
  1075. #
  1076. # COVERAGE_CFLAGS = $(CFLAGS) -O0 -ftest-coverage -fprofile-arcs
  1077. # COVERAGE_LDFLAGS = $(CFLAGS) -O0 -lgcov
  1078. #
  1079. # coverage-build: coverage-clean
  1080. # $(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" all
  1081. # $(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" \
  1082. # -j1 test
  1083. #
  1084. # coverage-report:
  1085. # gcov -b *.c */*.c
  1086. # grep '^function.*called 0 ' *.c.gcov */*.c.gcov \
  1087. # | sed -e 's/\([^:]*\)\.gcov: *function \([^ ]*\) called.*/\1: \2/' \
  1088. # | tee coverage-untested-functions