smp.c 6.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259
  1. /*
  2. * SMP support for pSeries machines.
  3. *
  4. * Dave Engebretsen, Peter Bergner, and
  5. * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
  6. *
  7. * Plus various changes from other IBM teams...
  8. *
  9. * This program is free software; you can redistribute it and/or
  10. * modify it under the terms of the GNU General Public License
  11. * as published by the Free Software Foundation; either version
  12. * 2 of the License, or (at your option) any later version.
  13. */
  14. #include <linux/kernel.h>
  15. #include <linux/module.h>
  16. #include <linux/sched.h>
  17. #include <linux/smp.h>
  18. #include <linux/interrupt.h>
  19. #include <linux/delay.h>
  20. #include <linux/init.h>
  21. #include <linux/spinlock.h>
  22. #include <linux/cache.h>
  23. #include <linux/err.h>
  24. #include <linux/sysdev.h>
  25. #include <linux/cpu.h>
  26. #include <asm/ptrace.h>
  27. #include <linux/atomic.h>
  28. #include <asm/irq.h>
  29. #include <asm/page.h>
  30. #include <asm/pgtable.h>
  31. #include <asm/io.h>
  32. #include <asm/prom.h>
  33. #include <asm/smp.h>
  34. #include <asm/paca.h>
  35. #include <asm/machdep.h>
  36. #include <asm/cputable.h>
  37. #include <asm/firmware.h>
  38. #include <asm/system.h>
  39. #include <asm/rtas.h>
  40. #include <asm/pSeries_reconfig.h>
  41. #include <asm/mpic.h>
  42. #include <asm/vdso_datapage.h>
  43. #include <asm/cputhreads.h>
  44. #include <asm/xics.h>
  45. #include "plpar_wrappers.h"
  46. #include "pseries.h"
  47. #include "offline_states.h"
  48. /*
  49. * The Primary thread of each non-boot processor was started from the OF client
  50. * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
  51. */
  52. static cpumask_var_t of_spin_mask;
  53. /* Query where a cpu is now. Return codes #defined in plpar_wrappers.h */
  54. int smp_query_cpu_stopped(unsigned int pcpu)
  55. {
  56. int cpu_status, status;
  57. int qcss_tok = rtas_token("query-cpu-stopped-state");
  58. if (qcss_tok == RTAS_UNKNOWN_SERVICE) {
  59. printk_once(KERN_INFO
  60. "Firmware doesn't support query-cpu-stopped-state\n");
  61. return QCSS_HARDWARE_ERROR;
  62. }
  63. status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
  64. if (status != 0) {
  65. printk(KERN_ERR
  66. "RTAS query-cpu-stopped-state failed: %i\n", status);
  67. return status;
  68. }
  69. return cpu_status;
  70. }
  71. /**
  72. * smp_startup_cpu() - start the given cpu
  73. *
  74. * At boot time, there is nothing to do for primary threads which were
  75. * started from Open Firmware. For anything else, call RTAS with the
  76. * appropriate start location.
  77. *
  78. * Returns:
  79. * 0 - failure
  80. * 1 - success
  81. */
  82. static inline int __devinit smp_startup_cpu(unsigned int lcpu)
  83. {
  84. int status;
  85. unsigned long start_here = __pa((u32)*((unsigned long *)
  86. generic_secondary_smp_init));
  87. unsigned int pcpu;
  88. int start_cpu;
  89. if (cpumask_test_cpu(lcpu, of_spin_mask))
  90. /* Already started by OF and sitting in spin loop */
  91. return 1;
  92. pcpu = get_hard_smp_processor_id(lcpu);
  93. /* Check to see if the CPU out of FW already for kexec */
  94. if (smp_query_cpu_stopped(pcpu) == QCSS_NOT_STOPPED){
  95. cpumask_set_cpu(lcpu, of_spin_mask);
  96. return 1;
  97. }
  98. /* Fixup atomic count: it exited inside IRQ handler. */
  99. task_thread_info(paca[lcpu].__current)->preempt_count = 0;
  100. #ifdef CONFIG_HOTPLUG_CPU
  101. if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE)
  102. goto out;
  103. #endif
  104. /*
  105. * If the RTAS start-cpu token does not exist then presume the
  106. * cpu is already spinning.
  107. */
  108. start_cpu = rtas_token("start-cpu");
  109. if (start_cpu == RTAS_UNKNOWN_SERVICE)
  110. return 1;
  111. status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, pcpu);
  112. if (status != 0) {
  113. printk(KERN_ERR "start-cpu failed: %i\n", status);
  114. return 0;
  115. }
  116. #ifdef CONFIG_HOTPLUG_CPU
  117. out:
  118. #endif
  119. return 1;
  120. }
  121. static void __devinit smp_xics_setup_cpu(int cpu)
  122. {
  123. if (cpu != boot_cpuid)
  124. xics_setup_cpu();
  125. if (firmware_has_feature(FW_FEATURE_SPLPAR))
  126. vpa_init(cpu);
  127. cpumask_clear_cpu(cpu, of_spin_mask);
  128. #ifdef CONFIG_HOTPLUG_CPU
  129. set_cpu_current_state(cpu, CPU_STATE_ONLINE);
  130. set_default_offline_state(cpu);
  131. #endif
  132. }
  133. static int __devinit smp_pSeries_kick_cpu(int nr)
  134. {
  135. BUG_ON(nr < 0 || nr >= NR_CPUS);
  136. if (!smp_startup_cpu(nr))
  137. return -ENOENT;
  138. /*
  139. * The processor is currently spinning, waiting for the
  140. * cpu_start field to become non-zero After we set cpu_start,
  141. * the processor will continue on to secondary_start
  142. */
  143. paca[nr].cpu_start = 1;
  144. #ifdef CONFIG_HOTPLUG_CPU
  145. set_preferred_offline_state(nr, CPU_STATE_ONLINE);
  146. if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) {
  147. long rc;
  148. unsigned long hcpuid;
  149. hcpuid = get_hard_smp_processor_id(nr);
  150. rc = plpar_hcall_norets(H_PROD, hcpuid);
  151. if (rc != H_SUCCESS)
  152. printk(KERN_ERR "Error: Prod to wake up processor %d "
  153. "Ret= %ld\n", nr, rc);
  154. }
  155. #endif
  156. return 0;
  157. }
  158. static int smp_pSeries_cpu_bootable(unsigned int nr)
  159. {
  160. /* Special case - we inhibit secondary thread startup
  161. * during boot if the user requests it.
  162. */
  163. if (system_state < SYSTEM_RUNNING && cpu_has_feature(CPU_FTR_SMT)) {
  164. if (!smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
  165. return 0;
  166. if (smt_enabled_at_boot
  167. && cpu_thread_in_core(nr) >= smt_enabled_at_boot)
  168. return 0;
  169. }
  170. return 1;
  171. }
  172. static struct smp_ops_t pSeries_mpic_smp_ops = {
  173. .message_pass = smp_mpic_message_pass,
  174. .probe = smp_mpic_probe,
  175. .kick_cpu = smp_pSeries_kick_cpu,
  176. .setup_cpu = smp_mpic_setup_cpu,
  177. };
  178. static struct smp_ops_t pSeries_xics_smp_ops = {
  179. .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */
  180. .cause_ipi = NULL, /* Filled at runtime by xics_smp_probe() */
  181. .probe = xics_smp_probe,
  182. .kick_cpu = smp_pSeries_kick_cpu,
  183. .setup_cpu = smp_xics_setup_cpu,
  184. .cpu_bootable = smp_pSeries_cpu_bootable,
  185. };
  186. /* This is called very early */
  187. static void __init smp_init_pseries(void)
  188. {
  189. int i;
  190. pr_debug(" -> smp_init_pSeries()\n");
  191. alloc_bootmem_cpumask_var(&of_spin_mask);
  192. /* Mark threads which are still spinning in hold loops. */
  193. if (cpu_has_feature(CPU_FTR_SMT)) {
  194. for_each_present_cpu(i) {
  195. if (cpu_thread_in_core(i) == 0)
  196. cpumask_set_cpu(i, of_spin_mask);
  197. }
  198. } else {
  199. cpumask_copy(of_spin_mask, cpu_present_mask);
  200. }
  201. cpumask_clear_cpu(boot_cpuid, of_spin_mask);
  202. /* Non-lpar has additional take/give timebase */
  203. if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
  204. smp_ops->give_timebase = rtas_give_timebase;
  205. smp_ops->take_timebase = rtas_take_timebase;
  206. }
  207. pr_debug(" <- smp_init_pSeries()\n");
  208. }
  209. void __init smp_init_pseries_mpic(void)
  210. {
  211. smp_ops = &pSeries_mpic_smp_ops;
  212. smp_init_pseries();
  213. }
  214. void __init smp_init_pseries_xics(void)
  215. {
  216. smp_ops = &pSeries_xics_smp_ops;
  217. smp_init_pseries();
  218. }