acpi.c 26 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046
  1. /*
  2. * acpi.c - Architecture-Specific Low-Level ACPI Support
  3. *
  4. * Copyright (C) 1999 VA Linux Systems
  5. * Copyright (C) 1999,2000 Walt Drummond <drummond@valinux.com>
  6. * Copyright (C) 2000, 2002-2003 Hewlett-Packard Co.
  7. * David Mosberger-Tang <davidm@hpl.hp.com>
  8. * Copyright (C) 2000 Intel Corp.
  9. * Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
  10. * Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
  11. * Copyright (C) 2001 Jenna Hall <jenna.s.hall@intel.com>
  12. * Copyright (C) 2001 Takayoshi Kochi <t-kochi@bq.jp.nec.com>
  13. * Copyright (C) 2002 Erich Focht <efocht@ess.nec.de>
  14. * Copyright (C) 2004 Ashok Raj <ashok.raj@intel.com>
  15. *
  16. * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  17. *
  18. * This program is free software; you can redistribute it and/or modify
  19. * it under the terms of the GNU General Public License as published by
  20. * the Free Software Foundation; either version 2 of the License, or
  21. * (at your option) any later version.
  22. *
  23. * This program is distributed in the hope that it will be useful,
  24. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  25. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  26. * GNU General Public License for more details.
  27. *
  28. * You should have received a copy of the GNU General Public License
  29. * along with this program; if not, write to the Free Software
  30. * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  31. *
  32. * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  33. */
  34. #include <linux/module.h>
  35. #include <linux/init.h>
  36. #include <linux/kernel.h>
  37. #include <linux/sched.h>
  38. #include <linux/smp.h>
  39. #include <linux/string.h>
  40. #include <linux/types.h>
  41. #include <linux/irq.h>
  42. #include <linux/acpi.h>
  43. #include <linux/efi.h>
  44. #include <linux/mmzone.h>
  45. #include <linux/nodemask.h>
  46. #include <linux/slab.h>
  47. #include <acpi/processor.h>
  48. #include <asm/io.h>
  49. #include <asm/iosapic.h>
  50. #include <asm/machvec.h>
  51. #include <asm/page.h>
  52. #include <asm/system.h>
  53. #include <asm/numa.h>
  54. #include <asm/sal.h>
  55. #include <asm/cyclone.h>
  56. #include <asm/xen/hypervisor.h>
  57. #define BAD_MADT_ENTRY(entry, end) ( \
  58. (!entry) || (unsigned long)entry + sizeof(*entry) > end || \
  59. ((struct acpi_subtable_header *)entry)->length < sizeof(*entry))
  60. #define PREFIX "ACPI: "
  61. u32 acpi_rsdt_forced;
  62. unsigned int acpi_cpei_override;
  63. unsigned int acpi_cpei_phys_cpuid;
  64. unsigned long acpi_wakeup_address = 0;
  65. #ifdef CONFIG_IA64_GENERIC
  66. static unsigned long __init acpi_find_rsdp(void)
  67. {
  68. unsigned long rsdp_phys = 0;
  69. if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
  70. rsdp_phys = efi.acpi20;
  71. else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
  72. printk(KERN_WARNING PREFIX
  73. "v1.0/r0.71 tables no longer supported\n");
  74. return rsdp_phys;
  75. }
  76. const char __init *
  77. acpi_get_sysname(void)
  78. {
  79. unsigned long rsdp_phys;
  80. struct acpi_table_rsdp *rsdp;
  81. struct acpi_table_xsdt *xsdt;
  82. struct acpi_table_header *hdr;
  83. #ifdef CONFIG_DMAR
  84. u64 i, nentries;
  85. #endif
  86. rsdp_phys = acpi_find_rsdp();
  87. if (!rsdp_phys) {
  88. printk(KERN_ERR
  89. "ACPI 2.0 RSDP not found, default to \"dig\"\n");
  90. return "dig";
  91. }
  92. rsdp = (struct acpi_table_rsdp *)__va(rsdp_phys);
  93. if (strncmp(rsdp->signature, ACPI_SIG_RSDP, sizeof(ACPI_SIG_RSDP) - 1)) {
  94. printk(KERN_ERR
  95. "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n");
  96. return "dig";
  97. }
  98. xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_physical_address);
  99. hdr = &xsdt->header;
  100. if (strncmp(hdr->signature, ACPI_SIG_XSDT, sizeof(ACPI_SIG_XSDT) - 1)) {
  101. printk(KERN_ERR
  102. "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n");
  103. return "dig";
  104. }
  105. if (!strcmp(hdr->oem_id, "HP")) {
  106. return "hpzx1";
  107. } else if (!strcmp(hdr->oem_id, "SGI")) {
  108. if (!strcmp(hdr->oem_table_id + 4, "UV"))
  109. return "uv";
  110. else
  111. return "sn2";
  112. } else if (xen_pv_domain() && !strcmp(hdr->oem_id, "XEN")) {
  113. return "xen";
  114. }
  115. #ifdef CONFIG_DMAR
  116. /* Look for Intel IOMMU */
  117. nentries = (hdr->length - sizeof(*hdr)) /
  118. sizeof(xsdt->table_offset_entry[0]);
  119. for (i = 0; i < nentries; i++) {
  120. hdr = __va(xsdt->table_offset_entry[i]);
  121. if (strncmp(hdr->signature, ACPI_SIG_DMAR,
  122. sizeof(ACPI_SIG_DMAR) - 1) == 0)
  123. return "dig_vtd";
  124. }
  125. #endif
  126. return "dig";
  127. }
  128. #endif /* CONFIG_IA64_GENERIC */
  129. #define ACPI_MAX_PLATFORM_INTERRUPTS 256
  130. /* Array to record platform interrupt vectors for generic interrupt routing. */
  131. int platform_intr_list[ACPI_MAX_PLATFORM_INTERRUPTS] = {
  132. [0 ... ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1
  133. };
  134. enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC;
  135. /*
  136. * Interrupt routing API for device drivers. Provides interrupt vector for
  137. * a generic platform event. Currently only CPEI is implemented.
  138. */
  139. int acpi_request_vector(u32 int_type)
  140. {
  141. int vector = -1;
  142. if (int_type < ACPI_MAX_PLATFORM_INTERRUPTS) {
  143. /* corrected platform error interrupt */
  144. vector = platform_intr_list[int_type];
  145. } else
  146. printk(KERN_ERR
  147. "acpi_request_vector(): invalid interrupt type\n");
  148. return vector;
  149. }
  150. char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
  151. {
  152. return __va(phys_addr);
  153. }
  154. void __init __acpi_unmap_table(char *map, unsigned long size)
  155. {
  156. }
  157. /* --------------------------------------------------------------------------
  158. Boot-time Table Parsing
  159. -------------------------------------------------------------------------- */
  160. static int available_cpus __initdata;
  161. struct acpi_table_madt *acpi_madt __initdata;
  162. static u8 has_8259;
  163. static int __init
  164. acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
  165. const unsigned long end)
  166. {
  167. struct acpi_madt_local_apic_override *lapic;
  168. lapic = (struct acpi_madt_local_apic_override *)header;
  169. if (BAD_MADT_ENTRY(lapic, end))
  170. return -EINVAL;
  171. if (lapic->address) {
  172. iounmap(ipi_base_addr);
  173. ipi_base_addr = ioremap(lapic->address, 0);
  174. }
  175. return 0;
  176. }
  177. static int __init
  178. acpi_parse_lsapic(struct acpi_subtable_header * header, const unsigned long end)
  179. {
  180. struct acpi_madt_local_sapic *lsapic;
  181. lsapic = (struct acpi_madt_local_sapic *)header;
  182. /*Skip BAD_MADT_ENTRY check, as lsapic size could vary */
  183. if (lsapic->lapic_flags & ACPI_MADT_ENABLED) {
  184. #ifdef CONFIG_SMP
  185. smp_boot_data.cpu_phys_id[available_cpus] =
  186. (lsapic->id << 8) | lsapic->eid;
  187. #endif
  188. ++available_cpus;
  189. }
  190. total_cpus++;
  191. return 0;
  192. }
  193. static int __init
  194. acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end)
  195. {
  196. struct acpi_madt_local_apic_nmi *lacpi_nmi;
  197. lacpi_nmi = (struct acpi_madt_local_apic_nmi *)header;
  198. if (BAD_MADT_ENTRY(lacpi_nmi, end))
  199. return -EINVAL;
  200. /* TBD: Support lapic_nmi entries */
  201. return 0;
  202. }
  203. static int __init
  204. acpi_parse_iosapic(struct acpi_subtable_header * header, const unsigned long end)
  205. {
  206. struct acpi_madt_io_sapic *iosapic;
  207. iosapic = (struct acpi_madt_io_sapic *)header;
  208. if (BAD_MADT_ENTRY(iosapic, end))
  209. return -EINVAL;
  210. return iosapic_init(iosapic->address, iosapic->global_irq_base);
  211. }
  212. static unsigned int __initdata acpi_madt_rev;
  213. static int __init
  214. acpi_parse_plat_int_src(struct acpi_subtable_header * header,
  215. const unsigned long end)
  216. {
  217. struct acpi_madt_interrupt_source *plintsrc;
  218. int vector;
  219. plintsrc = (struct acpi_madt_interrupt_source *)header;
  220. if (BAD_MADT_ENTRY(plintsrc, end))
  221. return -EINVAL;
  222. /*
  223. * Get vector assignment for this interrupt, set attributes,
  224. * and program the IOSAPIC routing table.
  225. */
  226. vector = iosapic_register_platform_intr(plintsrc->type,
  227. plintsrc->global_irq,
  228. plintsrc->io_sapic_vector,
  229. plintsrc->eid,
  230. plintsrc->id,
  231. ((plintsrc->inti_flags & ACPI_MADT_POLARITY_MASK) ==
  232. ACPI_MADT_POLARITY_ACTIVE_HIGH) ?
  233. IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
  234. ((plintsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) ==
  235. ACPI_MADT_TRIGGER_EDGE) ?
  236. IOSAPIC_EDGE : IOSAPIC_LEVEL);
  237. platform_intr_list[plintsrc->type] = vector;
  238. if (acpi_madt_rev > 1) {
  239. acpi_cpei_override = plintsrc->flags & ACPI_MADT_CPEI_OVERRIDE;
  240. }
  241. /*
  242. * Save the physical id, so we can check when its being removed
  243. */
  244. acpi_cpei_phys_cpuid = ((plintsrc->id << 8) | (plintsrc->eid)) & 0xffff;
  245. return 0;
  246. }
  247. #ifdef CONFIG_HOTPLUG_CPU
  248. unsigned int can_cpei_retarget(void)
  249. {
  250. extern int cpe_vector;
  251. extern unsigned int force_cpei_retarget;
  252. /*
  253. * Only if CPEI is supported and the override flag
  254. * is present, otherwise return that its re-targettable
  255. * if we are in polling mode.
  256. */
  257. if (cpe_vector > 0) {
  258. if (acpi_cpei_override || force_cpei_retarget)
  259. return 1;
  260. else
  261. return 0;
  262. }
  263. return 1;
  264. }
  265. unsigned int is_cpu_cpei_target(unsigned int cpu)
  266. {
  267. unsigned int logical_id;
  268. logical_id = cpu_logical_id(acpi_cpei_phys_cpuid);
  269. if (logical_id == cpu)
  270. return 1;
  271. else
  272. return 0;
  273. }
  274. void set_cpei_target_cpu(unsigned int cpu)
  275. {
  276. acpi_cpei_phys_cpuid = cpu_physical_id(cpu);
  277. }
  278. #endif
  279. unsigned int get_cpei_target_cpu(void)
  280. {
  281. return acpi_cpei_phys_cpuid;
  282. }
  283. static int __init
  284. acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
  285. const unsigned long end)
  286. {
  287. struct acpi_madt_interrupt_override *p;
  288. p = (struct acpi_madt_interrupt_override *)header;
  289. if (BAD_MADT_ENTRY(p, end))
  290. return -EINVAL;
  291. iosapic_override_isa_irq(p->source_irq, p->global_irq,
  292. ((p->inti_flags & ACPI_MADT_POLARITY_MASK) ==
  293. ACPI_MADT_POLARITY_ACTIVE_HIGH) ?
  294. IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
  295. ((p->inti_flags & ACPI_MADT_TRIGGER_MASK) ==
  296. ACPI_MADT_TRIGGER_EDGE) ?
  297. IOSAPIC_EDGE : IOSAPIC_LEVEL);
  298. return 0;
  299. }
  300. static int __init
  301. acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end)
  302. {
  303. struct acpi_madt_nmi_source *nmi_src;
  304. nmi_src = (struct acpi_madt_nmi_source *)header;
  305. if (BAD_MADT_ENTRY(nmi_src, end))
  306. return -EINVAL;
  307. /* TBD: Support nimsrc entries */
  308. return 0;
  309. }
  310. static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
  311. {
  312. if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) {
  313. /*
  314. * Unfortunately ITC_DRIFT is not yet part of the
  315. * official SAL spec, so the ITC_DRIFT bit is not
  316. * set by the BIOS on this hardware.
  317. */
  318. sal_platform_features |= IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT;
  319. cyclone_setup();
  320. }
  321. }
  322. static int __init acpi_parse_madt(struct acpi_table_header *table)
  323. {
  324. if (!table)
  325. return -EINVAL;
  326. acpi_madt = (struct acpi_table_madt *)table;
  327. acpi_madt_rev = acpi_madt->header.revision;
  328. /* remember the value for reference after free_initmem() */
  329. #ifdef CONFIG_ITANIUM
  330. has_8259 = 1; /* Firmware on old Itanium systems is broken */
  331. #else
  332. has_8259 = acpi_madt->flags & ACPI_MADT_PCAT_COMPAT;
  333. #endif
  334. iosapic_system_init(has_8259);
  335. /* Get base address of IPI Message Block */
  336. if (acpi_madt->address)
  337. ipi_base_addr = ioremap(acpi_madt->address, 0);
  338. printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr);
  339. acpi_madt_oem_check(acpi_madt->header.oem_id,
  340. acpi_madt->header.oem_table_id);
  341. return 0;
  342. }
  343. #ifdef CONFIG_ACPI_NUMA
  344. #undef SLIT_DEBUG
  345. #define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32)
  346. static int __initdata srat_num_cpus; /* number of cpus */
  347. static u32 __devinitdata pxm_flag[PXM_FLAG_LEN];
  348. #define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag))
  349. #define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag))
  350. static struct acpi_table_slit __initdata *slit_table;
  351. cpumask_t early_cpu_possible_map = CPU_MASK_NONE;
  352. static int get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa)
  353. {
  354. int pxm;
  355. pxm = pa->proximity_domain_lo;
  356. if (ia64_platform_is("sn2"))
  357. pxm += pa->proximity_domain_hi[0] << 8;
  358. return pxm;
  359. }
  360. static int get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma)
  361. {
  362. int pxm;
  363. pxm = ma->proximity_domain;
  364. if (!ia64_platform_is("sn2"))
  365. pxm &= 0xff;
  366. return pxm;
  367. }
  368. /*
  369. * ACPI 2.0 SLIT (System Locality Information Table)
  370. * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
  371. */
  372. void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
  373. {
  374. u32 len;
  375. len = sizeof(struct acpi_table_header) + 8
  376. + slit->locality_count * slit->locality_count;
  377. if (slit->header.length != len) {
  378. printk(KERN_ERR
  379. "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
  380. len, slit->header.length);
  381. return;
  382. }
  383. slit_table = slit;
  384. }
  385. void __init
  386. acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
  387. {
  388. int pxm;
  389. if (!(pa->flags & ACPI_SRAT_CPU_ENABLED))
  390. return;
  391. if (srat_num_cpus >= ARRAY_SIZE(node_cpuid)) {
  392. printk_once(KERN_WARNING
  393. "node_cpuid[%ld] is too small, may not be able to use all cpus\n",
  394. ARRAY_SIZE(node_cpuid));
  395. return;
  396. }
  397. pxm = get_processor_proximity_domain(pa);
  398. /* record this node in proximity bitmap */
  399. pxm_bit_set(pxm);
  400. node_cpuid[srat_num_cpus].phys_id =
  401. (pa->apic_id << 8) | (pa->local_sapic_eid);
  402. /* nid should be overridden as logical node id later */
  403. node_cpuid[srat_num_cpus].nid = pxm;
  404. cpu_set(srat_num_cpus, early_cpu_possible_map);
  405. srat_num_cpus++;
  406. }
  407. void __init
  408. acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
  409. {
  410. unsigned long paddr, size;
  411. int pxm;
  412. struct node_memblk_s *p, *q, *pend;
  413. pxm = get_memory_proximity_domain(ma);
  414. /* fill node memory chunk structure */
  415. paddr = ma->base_address;
  416. size = ma->length;
  417. /* Ignore disabled entries */
  418. if (!(ma->flags & ACPI_SRAT_MEM_ENABLED))
  419. return;
  420. /* record this node in proximity bitmap */
  421. pxm_bit_set(pxm);
  422. /* Insertion sort based on base address */
  423. pend = &node_memblk[num_node_memblks];
  424. for (p = &node_memblk[0]; p < pend; p++) {
  425. if (paddr < p->start_paddr)
  426. break;
  427. }
  428. if (p < pend) {
  429. for (q = pend - 1; q >= p; q--)
  430. *(q + 1) = *q;
  431. }
  432. p->start_paddr = paddr;
  433. p->size = size;
  434. p->nid = pxm;
  435. num_node_memblks++;
  436. }
  437. void __init acpi_numa_arch_fixup(void)
  438. {
  439. int i, j, node_from, node_to;
  440. /* If there's no SRAT, fix the phys_id and mark node 0 online */
  441. if (srat_num_cpus == 0) {
  442. node_set_online(0);
  443. node_cpuid[0].phys_id = hard_smp_processor_id();
  444. return;
  445. }
  446. /*
  447. * MCD - This can probably be dropped now. No need for pxm ID to node ID
  448. * mapping with sparse node numbering iff MAX_PXM_DOMAINS <= MAX_NUMNODES.
  449. */
  450. nodes_clear(node_online_map);
  451. for (i = 0; i < MAX_PXM_DOMAINS; i++) {
  452. if (pxm_bit_test(i)) {
  453. int nid = acpi_map_pxm_to_node(i);
  454. node_set_online(nid);
  455. }
  456. }
  457. /* set logical node id in memory chunk structure */
  458. for (i = 0; i < num_node_memblks; i++)
  459. node_memblk[i].nid = pxm_to_node(node_memblk[i].nid);
  460. /* assign memory bank numbers for each chunk on each node */
  461. for_each_online_node(i) {
  462. int bank;
  463. bank = 0;
  464. for (j = 0; j < num_node_memblks; j++)
  465. if (node_memblk[j].nid == i)
  466. node_memblk[j].bank = bank++;
  467. }
  468. /* set logical node id in cpu structure */
  469. for_each_possible_early_cpu(i)
  470. node_cpuid[i].nid = pxm_to_node(node_cpuid[i].nid);
  471. printk(KERN_INFO "Number of logical nodes in system = %d\n",
  472. num_online_nodes());
  473. printk(KERN_INFO "Number of memory chunks in system = %d\n",
  474. num_node_memblks);
  475. if (!slit_table) {
  476. for (i = 0; i < MAX_NUMNODES; i++)
  477. for (j = 0; j < MAX_NUMNODES; j++)
  478. node_distance(i, j) = i == j ? LOCAL_DISTANCE :
  479. REMOTE_DISTANCE;
  480. return;
  481. }
  482. memset(numa_slit, -1, sizeof(numa_slit));
  483. for (i = 0; i < slit_table->locality_count; i++) {
  484. if (!pxm_bit_test(i))
  485. continue;
  486. node_from = pxm_to_node(i);
  487. for (j = 0; j < slit_table->locality_count; j++) {
  488. if (!pxm_bit_test(j))
  489. continue;
  490. node_to = pxm_to_node(j);
  491. node_distance(node_from, node_to) =
  492. slit_table->entry[i * slit_table->locality_count + j];
  493. }
  494. }
  495. #ifdef SLIT_DEBUG
  496. printk("ACPI 2.0 SLIT locality table:\n");
  497. for_each_online_node(i) {
  498. for_each_online_node(j)
  499. printk("%03d ", node_distance(i, j));
  500. printk("\n");
  501. }
  502. #endif
  503. }
  504. #endif /* CONFIG_ACPI_NUMA */
  505. /*
  506. * success: return IRQ number (>=0)
  507. * failure: return < 0
  508. */
  509. int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
  510. {
  511. if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
  512. return gsi;
  513. if (has_8259 && gsi < 16)
  514. return isa_irq_to_vector(gsi);
  515. return iosapic_register_intr(gsi,
  516. (polarity ==
  517. ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH :
  518. IOSAPIC_POL_LOW,
  519. (triggering ==
  520. ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
  521. IOSAPIC_LEVEL);
  522. }
  523. void acpi_unregister_gsi(u32 gsi)
  524. {
  525. if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
  526. return;
  527. if (has_8259 && gsi < 16)
  528. return;
  529. iosapic_unregister_intr(gsi);
  530. }
  531. static int __init acpi_parse_fadt(struct acpi_table_header *table)
  532. {
  533. struct acpi_table_header *fadt_header;
  534. struct acpi_table_fadt *fadt;
  535. if (!table)
  536. return -EINVAL;
  537. fadt_header = (struct acpi_table_header *)table;
  538. if (fadt_header->revision != 3)
  539. return -ENODEV; /* Only deal with ACPI 2.0 FADT */
  540. fadt = (struct acpi_table_fadt *)fadt_header;
  541. acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE,
  542. ACPI_ACTIVE_LOW);
  543. return 0;
  544. }
  545. int __init early_acpi_boot_init(void)
  546. {
  547. int ret;
  548. /*
  549. * do a partial walk of MADT to determine how many CPUs
  550. * we have including offline CPUs
  551. */
  552. if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
  553. printk(KERN_ERR PREFIX "Can't find MADT\n");
  554. return 0;
  555. }
  556. ret = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
  557. acpi_parse_lsapic, NR_CPUS);
  558. if (ret < 1)
  559. printk(KERN_ERR PREFIX
  560. "Error parsing MADT - no LAPIC entries\n");
  561. #ifdef CONFIG_SMP
  562. if (available_cpus == 0) {
  563. printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n");
  564. printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id());
  565. smp_boot_data.cpu_phys_id[available_cpus] =
  566. hard_smp_processor_id();
  567. available_cpus = 1; /* We've got at least one of these, no? */
  568. }
  569. smp_boot_data.cpu_count = available_cpus;
  570. #endif
  571. /* Make boot-up look pretty */
  572. printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus,
  573. total_cpus);
  574. return 0;
  575. }
  576. int __init acpi_boot_init(void)
  577. {
  578. /*
  579. * MADT
  580. * ----
  581. * Parse the Multiple APIC Description Table (MADT), if exists.
  582. * Note that this table provides platform SMP configuration
  583. * information -- the successor to MPS tables.
  584. */
  585. if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
  586. printk(KERN_ERR PREFIX "Can't find MADT\n");
  587. goto skip_madt;
  588. }
  589. /* Local APIC */
  590. if (acpi_table_parse_madt
  591. (ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, acpi_parse_lapic_addr_ovr, 0) < 0)
  592. printk(KERN_ERR PREFIX
  593. "Error parsing LAPIC address override entry\n");
  594. if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0)
  595. < 0)
  596. printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
  597. /* I/O APIC */
  598. if (acpi_table_parse_madt
  599. (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) {
  600. if (!ia64_platform_is("sn2"))
  601. printk(KERN_ERR PREFIX
  602. "Error parsing MADT - no IOSAPIC entries\n");
  603. }
  604. /* System-Level Interrupt Routing */
  605. if (acpi_table_parse_madt
  606. (ACPI_MADT_TYPE_INTERRUPT_SOURCE, acpi_parse_plat_int_src,
  607. ACPI_MAX_PLATFORM_INTERRUPTS) < 0)
  608. printk(KERN_ERR PREFIX
  609. "Error parsing platform interrupt source entry\n");
  610. if (acpi_table_parse_madt
  611. (ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, 0) < 0)
  612. printk(KERN_ERR PREFIX
  613. "Error parsing interrupt source overrides entry\n");
  614. if (acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, 0) < 0)
  615. printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
  616. skip_madt:
  617. /*
  618. * FADT says whether a legacy keyboard controller is present.
  619. * The FADT also contains an SCI_INT line, by which the system
  620. * gets interrupts such as power and sleep buttons. If it's not
  621. * on a Legacy interrupt, it needs to be setup.
  622. */
  623. if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt))
  624. printk(KERN_ERR PREFIX "Can't find FADT\n");
  625. #ifdef CONFIG_ACPI_NUMA
  626. #ifdef CONFIG_SMP
  627. if (srat_num_cpus == 0) {
  628. int cpu, i = 1;
  629. for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++)
  630. if (smp_boot_data.cpu_phys_id[cpu] !=
  631. hard_smp_processor_id())
  632. node_cpuid[i++].phys_id =
  633. smp_boot_data.cpu_phys_id[cpu];
  634. }
  635. #endif
  636. build_cpu_to_node_map();
  637. #endif
  638. return 0;
  639. }
  640. int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
  641. {
  642. int tmp;
  643. if (has_8259 && gsi < 16)
  644. *irq = isa_irq_to_vector(gsi);
  645. else {
  646. tmp = gsi_to_irq(gsi);
  647. if (tmp == -1)
  648. return -1;
  649. *irq = tmp;
  650. }
  651. return 0;
  652. }
  653. int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
  654. {
  655. if (isa_irq >= 16)
  656. return -1;
  657. *gsi = isa_irq;
  658. return 0;
  659. }
  660. /*
  661. * ACPI based hotplug CPU support
  662. */
  663. #ifdef CONFIG_ACPI_HOTPLUG_CPU
  664. static __cpuinit
  665. int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
  666. {
  667. #ifdef CONFIG_ACPI_NUMA
  668. int pxm_id;
  669. int nid;
  670. pxm_id = acpi_get_pxm(handle);
  671. /*
  672. * We don't have cpu-only-node hotadd. But if the system equips
  673. * SRAT table, pxm is already found and node is ready.
  674. * So, just pxm_to_nid(pxm) is OK.
  675. * This code here is for the system which doesn't have full SRAT
  676. * table for possible cpus.
  677. */
  678. nid = acpi_map_pxm_to_node(pxm_id);
  679. node_cpuid[cpu].phys_id = physid;
  680. node_cpuid[cpu].nid = nid;
  681. #endif
  682. return (0);
  683. }
  684. int additional_cpus __initdata = -1;
  685. static __init int setup_additional_cpus(char *s)
  686. {
  687. if (s)
  688. additional_cpus = simple_strtol(s, NULL, 0);
  689. return 0;
  690. }
  691. early_param("additional_cpus", setup_additional_cpus);
  692. /*
  693. * cpu_possible_map should be static, it cannot change as CPUs
  694. * are onlined, or offlined. The reason is per-cpu data-structures
  695. * are allocated by some modules at init time, and dont expect to
  696. * do this dynamically on cpu arrival/departure.
  697. * cpu_present_map on the other hand can change dynamically.
  698. * In case when cpu_hotplug is not compiled, then we resort to current
  699. * behaviour, which is cpu_possible == cpu_present.
  700. * - Ashok Raj
  701. *
  702. * Three ways to find out the number of additional hotplug CPUs:
  703. * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
  704. * - The user can overwrite it with additional_cpus=NUM
  705. * - Otherwise don't reserve additional CPUs.
  706. */
  707. __init void prefill_possible_map(void)
  708. {
  709. int i;
  710. int possible, disabled_cpus;
  711. disabled_cpus = total_cpus - available_cpus;
  712. if (additional_cpus == -1) {
  713. if (disabled_cpus > 0)
  714. additional_cpus = disabled_cpus;
  715. else
  716. additional_cpus = 0;
  717. }
  718. possible = available_cpus + additional_cpus;
  719. if (possible > nr_cpu_ids)
  720. possible = nr_cpu_ids;
  721. printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
  722. possible, max((possible - available_cpus), 0));
  723. for (i = 0; i < possible; i++)
  724. set_cpu_possible(i, true);
  725. }
  726. static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
  727. {
  728. struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
  729. union acpi_object *obj;
  730. struct acpi_madt_local_sapic *lsapic;
  731. cpumask_t tmp_map;
  732. int cpu, physid;
  733. if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
  734. return -EINVAL;
  735. if (!buffer.length || !buffer.pointer)
  736. return -EINVAL;
  737. obj = buffer.pointer;
  738. if (obj->type != ACPI_TYPE_BUFFER)
  739. {
  740. kfree(buffer.pointer);
  741. return -EINVAL;
  742. }
  743. lsapic = (struct acpi_madt_local_sapic *)obj->buffer.pointer;
  744. if ((lsapic->header.type != ACPI_MADT_TYPE_LOCAL_SAPIC) ||
  745. (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))) {
  746. kfree(buffer.pointer);
  747. return -EINVAL;
  748. }
  749. physid = ((lsapic->id << 8) | (lsapic->eid));
  750. kfree(buffer.pointer);
  751. buffer.length = ACPI_ALLOCATE_BUFFER;
  752. buffer.pointer = NULL;
  753. cpumask_complement(&tmp_map, cpu_present_mask);
  754. cpu = cpumask_first(&tmp_map);
  755. if (cpu >= nr_cpu_ids)
  756. return -EINVAL;
  757. acpi_map_cpu2node(handle, cpu, physid);
  758. cpu_set(cpu, cpu_present_map);
  759. ia64_cpu_to_sapicid[cpu] = physid;
  760. acpi_processor_set_pdc(handle);
  761. *pcpu = cpu;
  762. return (0);
  763. }
  764. /* wrapper to silence section mismatch warning */
  765. int __ref acpi_map_lsapic(acpi_handle handle, int *pcpu)
  766. {
  767. return _acpi_map_lsapic(handle, pcpu);
  768. }
  769. EXPORT_SYMBOL(acpi_map_lsapic);
  770. int acpi_unmap_lsapic(int cpu)
  771. {
  772. ia64_cpu_to_sapicid[cpu] = -1;
  773. cpu_clear(cpu, cpu_present_map);
  774. #ifdef CONFIG_ACPI_NUMA
  775. /* NUMA specific cleanup's */
  776. #endif
  777. return (0);
  778. }
  779. EXPORT_SYMBOL(acpi_unmap_lsapic);
  780. #endif /* CONFIG_ACPI_HOTPLUG_CPU */
  781. #ifdef CONFIG_ACPI_NUMA
  782. static acpi_status __devinit
  783. acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret)
  784. {
  785. struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
  786. union acpi_object *obj;
  787. struct acpi_madt_io_sapic *iosapic;
  788. unsigned int gsi_base;
  789. int pxm, node;
  790. /* Only care about objects w/ a method that returns the MADT */
  791. if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
  792. return AE_OK;
  793. if (!buffer.length || !buffer.pointer)
  794. return AE_OK;
  795. obj = buffer.pointer;
  796. if (obj->type != ACPI_TYPE_BUFFER ||
  797. obj->buffer.length < sizeof(*iosapic)) {
  798. kfree(buffer.pointer);
  799. return AE_OK;
  800. }
  801. iosapic = (struct acpi_madt_io_sapic *)obj->buffer.pointer;
  802. if (iosapic->header.type != ACPI_MADT_TYPE_IO_SAPIC) {
  803. kfree(buffer.pointer);
  804. return AE_OK;
  805. }
  806. gsi_base = iosapic->global_irq_base;
  807. kfree(buffer.pointer);
  808. /*
  809. * OK, it's an IOSAPIC MADT entry, look for a _PXM value to tell
  810. * us which node to associate this with.
  811. */
  812. pxm = acpi_get_pxm(handle);
  813. if (pxm < 0)
  814. return AE_OK;
  815. node = pxm_to_node(pxm);
  816. if (node >= MAX_NUMNODES || !node_online(node) ||
  817. cpumask_empty(cpumask_of_node(node)))
  818. return AE_OK;
  819. /* We know a gsi to node mapping! */
  820. map_iosapic_to_node(gsi_base, node);
  821. return AE_OK;
  822. }
  823. static int __init
  824. acpi_map_iosapics (void)
  825. {
  826. acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
  827. return 0;
  828. }
  829. fs_initcall(acpi_map_iosapics);
  830. #endif /* CONFIG_ACPI_NUMA */
  831. int __ref acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
  832. {
  833. int err;
  834. if ((err = iosapic_init(phys_addr, gsi_base)))
  835. return err;
  836. #ifdef CONFIG_ACPI_NUMA
  837. acpi_map_iosapic(handle, 0, NULL, NULL);
  838. #endif /* CONFIG_ACPI_NUMA */
  839. return 0;
  840. }
  841. EXPORT_SYMBOL(acpi_register_ioapic);
  842. int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
  843. {
  844. return iosapic_remove(gsi_base);
  845. }
  846. EXPORT_SYMBOL(acpi_unregister_ioapic);
  847. /*
  848. * acpi_suspend_lowlevel() - save kernel state and suspend.
  849. *
  850. * TBD when when IA64 starts to support suspend...
  851. */
  852. int acpi_suspend_lowlevel(void) { return 0; }